TEM Characterization of Corrosion Initiation in Passive Films

This research program is intended to develop new insight into the mechanisms of localized corrosion initiation in passive metals through unique approaches based on examining corrosion initiation on needle-shaped samples similar to field emitter tips. Samples with this geometry allow localization of corrosion initiation to the tip itself and therefore pit initiation can be confined to a small lateral area. Local electric fields can also be controlled, thus permitting damage to be confined in the passive over layer, and characterized before pit initiation.High purity Al wire was used for the initial studies. Wire shaped specimens were electropolished in a 20 % perchloric in methyl alcohol solution at -30°C to obtain the fine needle geometry. The resultant tip radii ranged from 40 to 150 nm with no further sample prep needed and without the presence of artifacts.A custom-designed TEM holder for a Philips CM30 was fabricated, which allowed the needles to be characterized by TEM both prior to and after experiments.

Download Full-text

Skeletal elements of crinoid echinoderms: High-resolution structural and microanalytical results

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100074768 ◽

1983 ◽

Vol 41 ◽

pp. 194-195

Author(s):

D. F. Blake ◽

L. F. Allard ◽

D. R. Peacor

Keyword(s):

High Resolution ◽

Marine Invertebrates ◽

Sea Urchins ◽

Structural Features ◽

Sea Stars ◽

High Resolution Tem ◽

Relationship Of ◽

The Relationship ◽

Insight Into

Echinodermata is a phylum of marine invertebrates which has been extant since Cambrian time (c.a. 500 m.y. before the present). Modern examples of echinoderms include sea urchins, sea stars, and sea lilies (crinoids). The endoskeletons of echinoderms are composed of plates or ossicles (Fig. 1) which are with few exceptions, porous, single crystals of high-magnesian calcite. Despite their single crystal nature, fracture surfaces do not exhibit the near-perfect {10.4} cleavage characteristic of inorganic calcite. This paradoxical mix of biogenic and inorganic features has prompted much recent work on echinoderm skeletal crystallography. Furthermore, fossil echinoderm hard parts comprise a volumetrically significant portion of some marine limestones sequences. The ultrastructural and microchemical characterization of modern skeletal material should lend insight into: 1). The nature of the biogenic processes involved, for example, the relationship of Mg heterogeneity to morphological and structural features in modern echinoderm material, and 2). The nature of the diagenetic changes undergone by their ancient, fossilized counterparts. In this study, high resolution TEM (HRTEM), high voltage TEM (HVTEM), and STEM microanalysis are used to characterize tha ultrastructural and microchemical composition of skeletal elements of the modern crinoid Neocrinus blakei.

Download Full-text

Location and Characterization of In-Cloud Lightning Currents by Multiple Station VHF and Electric Fields Measurements

10.21236/ada264097 ◽

1992 ◽

Author(s):

Ewen M. Thomson

Keyword(s):

Electric Fields

Download Full-text

First Insight into Nutraceutical Properties of Local Salento Cichorium intybus Varieties: NMR-Based Metabolomic Approach

International Journal of Environmental Research and Public Health ◽

10.3390/ijerph18084057 ◽

2021 ◽

Vol 18 (8) ◽

pp. 4057

Author(s):

Chiara Roberta Girelli ◽

Francesca Serio ◽

Rita Accogli ◽

Federica Angilè ◽

Antonella De Donno ◽

...

Keyword(s):

1H Nmr ◽

Cichorium Intybus ◽

Resonance Spectroscopy ◽

Metabolic Profiles ◽

Whole Plant ◽

Different Content ◽

Insight Into ◽

Nutraceutical Properties ◽

Metabolomic Approach

Background: Plants of genus Cichorium are known for their therapeutic and nutraceutical properties determined by a wealth of phytochemical substances contained in the whole plant. The aim of this paper was to characterize the metabolic profiles of local Salento chicory (Cichorium intybus L.) varieties (“Bianca”, “Galatina”, “Leccese”, and “Otranto”) in order to describe their metabolites composition together with possible bioactivity and health beneficial properties. Methods: The investigation was performed by 1H-NMR spectroscopy and Multivariate Analysis (MVA), by which the metabolic profiles of the samples were easily obtained and compared. Results: The supervised Partial Least Squares Discriminant Analysis (PLS-DA) analysis showed as “Bianca” and “Galatina” samples grouped together separated by “Leccese” and “Otranto” varieties. A different content of free amino acids and organic acids was observed among the varieties. In particular a high content of cichoric and monocaffeoyl tartaric acid was observed for the “Leccese” variety. The presence of secondary metabolites adds significant interest in the investigation of Cichorium inthybus, as this vegetable may benefit human health when incorporated into the diet. Conclusions: The 1H-NMR (Nuclear Magnetic Resonance Spectroscopy) based characterization of Salento chicory varieties allowed us to determine the potential usefulness and nutraceutical properties of the product, also providing a method to guarantee its authenticity on a molecular scale.

Download Full-text

Use of Amperometric and Potentiometric Probes in Scanning Electrochemical Microscopy for the Spatially-Resolved Monitoring of Severe Localized Corrosion Sites on Aluminum Alloy 2098-T351

Sensors ◽

10.3390/s21041132 ◽

2021 ◽

Vol 21 (4) ◽

pp. 1132 ◽

Cited By ~ 1

Author(s):

Rejane M. P. da Silva ◽

Javier Izquierdo ◽

Mariana X. Milagre ◽

Abenchara M. Betancor-Abreu ◽

Isolda Costa ◽

...

Keyword(s):

Scanning Electrochemical Microscopy ◽

Oxygen Depletion ◽

Localized Corrosion ◽

Alloy Surface ◽

Al Alloy ◽

Spatially Resolved ◽

Lower Oxygen ◽

Local Ph ◽

Electrochemical Microscopy

Amperometric and potentiometric probes were employed for the detection and characterization of reactive sites on the 2098-T351 Al-alloy (AA2098-T351) using scanning electrochemical microscopy (SECM). Firstly, the probe of concept was performed on a model Mg-Al galvanic pair system using SECM in the amperometric and potentiometric operation modes, in order to address the responsiveness of the probes for the characterization of this galvanic pair system. Next, these sensing probes were employed to characterize the 2098-T351 alloy surface immersed in a saline aqueous solution at ambient temperature. The distribution of reactive sites and the local pH changes associated with severe localized corrosion (SLC) on the alloy surface were imaged and subsequently studied. Higher hydrogen evolution, lower oxygen depletion and acidification occurred at the SLC sites developed on the 2098-T351 Al-alloy.

Download Full-text

“Real-World” Microscopy: Understanding Environment-Sensitive Behavior of Ni-Base Welds

Microscopy and Microanalysis ◽

10.1017/s1431927600022765 ◽

1998 ◽

Vol 4 (S2) ◽

pp. 528-529

Author(s):

M. G. Burke ◽

R. J. Wehrer ◽

C.M. Brown

Keyword(s):

Nuclear Power ◽

Base Alloy ◽

Analytical Electron Microscopy ◽

Furnace Cool ◽

Environmental Embrittlement ◽

Reported Study ◽

Compositional Changes ◽

Insight Into ◽

Sensitive Behavior

Ni-base alloy welds such as EN82H weld metal are frequently employed in nuclear power applications where resistance to corrosion is required. Results of a recently reported study of the mechanical properties of EN82H welds show that this alloy is susceptible to low-temperature (∼100°C) environmental embrittlement (LTEE) in hydrogenated water. LTEE is a manifestation of hydrogen embrittlement in these alloys.1 Recent LTEE tests have demonstrated a beneficial effect of a high-temperature (∼1100°C) anneal and furnace-cool in alleviating the material's susceptibility to LTEE. Understanding the reason for the reduction in LTEE susceptibility requires detailed characterization of the microstructure so that the specific structural and compositional changes that have been induced by the solution-anneal can be identified. This study reports the results of light optical and analytical electron microscopy (AEM) characterization of the microstructures of as-fabricated and as-solution-annealed EN82H welds with the objective of providing insight into the observed LTEE behavior.

Download Full-text

Specificities and Synergistic Actions of Novel PL8 and PL7 Alginate Lyases from the Marine Fungus Paradendryphiella salina

Journal of Fungi ◽

10.3390/jof7020080 ◽

2021 ◽

Vol 7 (2) ◽

pp. 80

Author(s):

Bo Pilgaard ◽

Marlene Vuillemin ◽

Jesper Holck ◽

Casper Wilkens ◽

Anne S. Meyer

Keyword(s):

Alginate Lyase ◽

Marine Fungus ◽

Brown Macroalgae ◽

Polysaccharide Lyases ◽

Alginate Lyases ◽

Encoding Genes ◽

Substrate Affinities ◽

Alginate Degradation ◽

Insight Into

Alginate is an anionic polysaccharide abundantly present in the cell walls of brown macroalgae. The enzymatic depolymerization is performed solely by alginate lyases (EC 4.2.2.x), categorized as polysaccharide lyases (PLs) belonging to 12 different PL families. Until now, the vast majority of the alginate lyases have been found in bacteria. We report here the first extensive characterization of four alginate lyases from a marine fungus, the ascomycete Paradendryphiella salina, a known saprophyte of seaweeds. We have identified four polysaccharide lyase encoding genes bioinformatically in P. salina, one PL8 (PsMan8A), and three PL7 alginate lyases (PsAlg7A, -B, and -C). PsMan8A was demonstrated to exert exo-action on polymannuronic acid, and no action on alginate, indicating that this enzyme is most likely an exo-acting polymannuronic acid specific lyase. This enzyme is the first alginate lyase assigned to PL8 and polymannuronic acid thus represents a new substrate specificity in this family. The PL7 lyases (PsAlg7A, -B, and -C) were found to be endo-acting alginate lyases with different activity optima, substrate affinities, and product profiles. PsAlg7A and PsMan8A showed a clear synergistic action for the complete depolymerization of polyM at pH 5. PsAlg7A depolymerized polyM to mainly DP5 and DP3 oligomers and PsMan8A to dimers and monosaccharides. PsAlg7B and PsAlg7C showed substrate affinities towards both polyM and polyG at pH 8, depolymerizing both substrates to DP9-DP2 oligomers. The findings elucidate how P. salina accomplishes alginate depolymerization and provide insight into an efficient synergistic cooperation that may provide a new foundation for enzyme selection for alginate degradation in seaweed bioprocessing.

Download Full-text