Bioactive Ceramic And Model Surfaces Adsorb Ligands and Factors That Stimulate Cellular Function

2000 ◽  
Vol 6 (S2) ◽  
pp. 992-993
Author(s):  
Russell J. Composto ◽  
Paul Ducheyne ◽  
Elsie Effah Kaufman
Keyword(s):  
Bioactive Glass ◽  
Serum Proteins ◽  
Rutherford Backscattering Spectrometry ◽  
Ionic Composition ◽  
Aqueous Media ◽  
Force Microscopy ◽  
Atomic Force ◽  
Kinetics Of Formation ◽  
Physical And Chemical

Microscopy and microanalysis techniques have played an important role in our understanding of how biomaterials interact with their environment. In first part of this study, we will focus on the behavior of bioactive glass, whereas in the second a model surface will be investigated. Upon implantation bioactive glass undergoes a series of reactions that leads to the formation of a calcium phosphate-rich layer. Most in vitro studies of the changes that occur on the surface of bioactive glass have employed the use of buffer solutions with compositions reflecting the ionic composition of interstitial fluid. Although these studies have documented the physical and chemical changes associated with bioactive glass immersed in aqueous media, they do not reveal the effect of serum proteins and cells which are present at the implantation site. In the present study, we document, using atomic force microscopy (AFM) and Rutherford backscattering spectrometry (RBS), significant differences in reaction layer composition, thickness, morphology and kinetics of formation arising from the presence of serum proteins.

scholarly journals Effect of nanoparticulate bioactive glass particles on bioactivity and cytocompatibility of poly(3-hydroxybutyrate) composites

2009 ◽  
Vol 7 (44) ◽  
pp. 453-465 ◽  
Author(s):  
Superb K. Misra ◽  
Tahera Ansari ◽  
Dirk Mohn ◽  
Sabeel P. Valappil ◽  
Tobias J. Brunner ◽  
...  
Keyword(s):  
Bioactive Glass ◽  
Cell Attachment ◽  
Composite Films ◽  
Force Microscopy ◽  
Atomic Force ◽  
Proliferation And Differentiation ◽  
45S5 Bioglass ◽  
Composite Substrates ◽  
Osteocalcin Production

This work investigated the effect of adding nanoparticulate (29 nm) bioactive glass particles on the bioactivity, degradation and in vitro cytocompatibility of poly(3-hydroxybutyrate) (P(3HB)) composites/nano-sized bioactive glass (n-BG). Two different concentrations (10 and 20 wt %) of nanoscale bioactive glass particles of 45S5 Bioglass composition were used to prepare composite films. Several techniques (Raman spectroscopy, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray) were used to monitor their surface and bioreactivity over a 45-day period of immersion in simulated body fluid (SBF). All results suggested the P(3HB)/n-BG composites to be highly bioactive, confirmed by the formation of hydroxyapatite on material surfaces upon immersion in SBF. The weight loss and water uptake were found to increase on increasing bioactive glass content. Cytocompatibility study (cell proliferation, cell attachment, alkaline phosphatase activity and osteocalcin production) using human MG-63 osteoblast-like cells in osteogenic and non-osteogenic medium showed that the composite substrates are suitable for cell attachment, proliferation and differentiation.

Rapid, Refined, and Robust Method for Expression, Purification, and Characterization of Recombinant Human Amyloid-beta M1-42

2019 ◽  
Author(s):  
Priya Prakash ◽  
Travis Lantz ◽  
Krupal P. Jethava ◽  
Gaurav Chopra
Keyword(s):  
Amyloid Beta ◽  
Western Blots ◽  
Force Microscopy ◽  
E Coli ◽  
Atomic Force ◽  
Set Up ◽  
Short Time

Amyloid plaques found in the brains of Alzheimer’s disease (AD) patients primarily consists of amyloid beta 1-42 (Ab42). Commercially, Ab42 is synthetized using peptide synthesizers. We describe a robust methodology for expression of recombinant human Ab(M1-42) in Rosetta(DE3)pLysS and BL21(DE3)pLysS competent E. coli with refined and rapid analytical purification techniques. The peptide is isolated and purified from the transformed cells using an optimized set-up for reverse-phase HPLC protocol, using commonly available C18 columns, yielding high amounts of peptide (~15-20 mg per 1 L culture) in a short time. The recombinant Ab(M1-42) forms characteristic aggregates similar to synthetic Ab42 aggregates as verified by western blots and atomic force microscopy to warrant future biological use. Our rapid, refined, and robust technique to purify human Ab(M1-42) can be used to synthesize chemical probes for several downstream in vitro and in vivo assays to facilitate AD research.

Targeting Breast Cancer Cells with G4 PAMAM Dendrimers and Valproic Acid Derivative Complexes

2020 ◽  
Vol 20 (15) ◽  
pp. 1857-1872
Author(s):  
Alberto M. Muñoz ◽  
Manuel J. Fragoso-Vázquez ◽  
Berenice P. Martel ◽  
Alma Chávez-Blanco ◽  
Alfonso Dueñas-González ◽  
...  
Keyword(s):  
Valproic Acid ◽  
Cell Lines ◽  
Water Solubility ◽  
Md Simulations ◽  
Pamam Dendrimer ◽  
Pamam Dendrimers ◽  
Force Microscopy ◽  
Micromolar Concentration ◽  
Atomic Force

Background: Our research group has developed some Valproic Acid (VPA) derivatives employed as anti-proliferative compounds targeting the HDAC8 enzyme. However, some of these compounds are poorly soluble in water. Objective: Employed the four generations of Polyamidoamine (G4 PAMAM) dendrimers as drug carriers of these compounds to increase their water solubility for further in vitro evaluation. Methods: VPA derivatives were subjected to Docking and Molecular Dynamics (MD) simulations to evaluate their affinity on G4 PAMAM. Then, HPLC-UV/VIS, 1H NMR, MALDI-TOF and atomic force microscopy were employed to establish the formation of the drug-G4 PAMAM complexes. Results: The docking results showed that the amide groups of VPA derivatives make polar interactions with G4 PAMAM, whereas MD simulations corroborated the stability of the complexes. HPLC UV/VIS experiments showed an increase in the drug water solubility which was found to be directly proportional to the amount of G4 PAMAM. 1H NMR showed a disappearance of the proton amine group signals, correlating with docking results. MALDI-TOF and atomic force microscopy suggested the drug-G4 PAMAM dendrimer complexes formation. Discussion: In vitro studies showed that G4 PAMAM has toxicity in the micromolar concentration in MDAMB- 231, MCF7, and 3T3-L1 cell lines. VPA CF-G4 PAMAM dendrimer complex showed anti-proliferative properties in the micromolar concentration in MCF-7 and 3T3-L1, and in the milimolar concentration in MDAMB- 231, whereas VPA MF-G4 PAMAM dendrimer complex didn’t show effects on the three cell lines employed. Conclusion: These results demonstrate that G4 PAMAM dendrimers are capableof transporting poorly watersoluble aryl-VPA derivate compounds to increase its cytotoxic activity against neoplastic cell lines.

scholarly journals Small Extracellular Vesicles Isolated from Serum May Serve as Signal-Enhancers for the Monitoring of CNS Tumors

2020 ◽  
Vol 21 (15) ◽  
pp. 5359 ◽  
Author(s):  
Gabriella Dobra ◽  
Matyas Bukva ◽  
Zoltan Szabo ◽  
Bella Bruszel ◽  
Maria Harmati ◽  
...  
Keyword(s):  
Extracellular Vesicles ◽  
Serum Proteins ◽  
Lumbar Disc ◽  
Principal Component ◽  
Cns Tumors ◽  
Serum Samples ◽  
Force Microscopy ◽  
Isolation And Characterization ◽  
Atomic Force ◽  
Patient Groups

Liquid biopsy-based methods to test biomarkers (e.g., serum proteins and extracellular vesicles) may help to monitor brain tumors. In this proteomics-based study, we aimed to identify a characteristic protein fingerprint associated with central nervous system (CNS) tumors. Overall, 96 human serum samples were obtained from four patient groups, namely glioblastoma multiforme (GBM), non-small-cell lung cancer brain metastasis (BM), meningioma (M) and lumbar disc hernia patients (CTRL). After the isolation and characterization of small extracellular vesicles (sEVs) by nanoparticle tracking analysis (NTA) and atomic force microscopy (AFM), liquid chromatography -mass spectrometry (LC-MS) was performed on two different sample types (whole serum and serum sEVs). Statistical analyses (ratio, Cohen’s d, receiver operating characteristic; ROC) were carried out to compare patient groups. To recognize differences between the two sample types, pairwise comparisons (Welch’s test) and ingenuity pathway analysis (IPA) were performed. According to our knowledge, this is the first study that compares the proteome of whole serum and serum-derived sEVs. From the 311 proteins identified, 10 whole serum proteins and 17 sEV proteins showed the highest intergroup differences. Sixty-five proteins were significantly enriched in sEV samples, while 129 proteins were significantly depleted compared to whole serum. Based on principal component analysis (PCA) analyses, sEVs are more suitable to discriminate between the patient groups. Our results support that sEVs have greater potential to monitor CNS tumors, than whole serum.

scholarly journals Osteoblast-Like Cell Behavior on Porous Scaffolds Based on Poly(styrene) Fibers

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Andrada Serafim ◽  
Romain Mallet ◽  
Florence Pascaretti-Grizon ◽  
Izabela-Cristina Stancu ◽  
Daniel Chappard
Keyword(s):  
Interference Microscopy ◽  
Porous Scaffolds ◽  
Allogenic Bone ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dry Spinning ◽  
Bone Trabeculae ◽  
Large Bone

Scaffolds of nonresorbable biomaterials can represent an interesting alternative for replacing large bone defects in some particular clinical cases with massive bone loss. Poly(styrene) microfibers were prepared by a dry spinning method. They were partially melted to provide 3D porous scaffolds. The quality of the material was assessed by Raman spectroscopy. Surface roughness was determined by atomic force microscopy and vertical interference microscopy. Saos-2 osteoblast-like cells were seeded on the surface of the fibers and left to proliferate. Cell morphology, evaluated by scanning electron microscopy, revealed that they can spread and elongate on the rough microfiber surface. Porous 3D scaffolds made of nonresorbable poly(styrene) fibers are cytocompatible biomaterials mimicking allogenic bone trabeculae and allowing the growth and development of osteoblast-like cellsin vitro.

scholarly journals Nanostructural and mechanical changes in the sclera following proteoglycan depletion

2018 ◽  
Vol 2 (2) ◽  
pp. 14-17
Author(s):  
Zhuola Zhuola ◽  
Steve Barrett ◽  
Yalda Ashraf Kharaz ◽  
Riaz Akhtar
Keyword(s):  
Mechanical Properties ◽  
Collagen Fibril ◽  
Enzymatic Degradation ◽  
Ocular Tissues ◽  
Force Microscopy ◽  
Nanomechanical Properties ◽  
Atomic Force ◽  
Fibril Morphology

The mechanical properties of ocular tissues, such as the sclera, have a major impact on healthy eye function, and are governed by the properties and composition of the microstructural components. For example, biomechanical degradation associated with myopia occurs alongside a reduction of proteoglycans (PGs). In this study, the role of PG degradation in the nanomechanical properties of the porcine sclera is explored. In-vitro enzymatic degradation of PGs was conducted with α-amylase and chondroitinase ABC enzymes. Collagen fibril morphology and nanomechanical stiffness were measured with atomic force microscopy (AFM). The elastic modulus of the tissue was reduced in all enzyme-treated samples relative to controls. In addition, collagen fibril organization was disrupted by PG depletion. Our data demonstrate that PGs play an important role in determining not only the mechanical properties at these length scales, but also collagen fibril arrangement.

scholarly journals Visualization by atomic force microscopy of tobacco mosaic virus movement protein–RNA complexes formed in vitro

2001 ◽  
Vol 82 (6) ◽  
pp. 1503-1508 ◽  
Author(s):  
O. I. Kiselyova ◽  
I. V. Yaminsky ◽  
E. M. Karger ◽  
O. Yu. Frolova ◽  
Y. L. Dorokhov ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Tobacco Mosaic Virus ◽  
Mosaic Virus ◽  
Movement Protein ◽  
Structural Conversion ◽  
Force Microscopy ◽  
Rna Transcripts ◽  
Atomic Force ◽  
Rna Complexes

The structure of complexes formed in vitro by tobacco mosaic virus (TMV)-coded movement protein (MP) with TMV RNA and short (890 nt) synthetic RNA transcripts was visualized by atomic force microscopy on a mica surface. MP molecules were found to be distributed along the chain of RNA and the structure of MP–RNA complexes depended on the molar MP:RNA ratios at which the complexes were formed. A rise in the molar MP:TMV RNA ratio from 20:1 to 60–100:1 resulted in an increase in the density of the MP packaging on TMV RNA and structural conversion of complexes from RNase-sensitive ‘beads-on-a-string’ into a ‘thick string’ form that was partly resistant to RNase. The ‘thick string’-type RNase-resistant complexes were also produced by short synthetic RNA transcripts at different MP:RNA ratios. The ‘thick string’ complexes are suggested to represent clusters of MP molecules cooperatively bound to discrete regions of TMV RNA and separated by protein-free RNA segments.

scholarly journals Dynamic mechanisms of CRISPR interference by Escherichia coli CRISPR-Cas3

2021 ◽  
Author(s):  
Kazuto Yoshimi ◽  
Kohei TAKESHITA ◽  
Noriyuki Kodera ◽  
Satomi Shibumura ◽  
Yuko Yamauchi ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
High Speed ◽  
Dna Helicase ◽  
Type I ◽  
Loop Formation ◽  
Force Microscopy ◽  
Atomic Force ◽  
Target Strand ◽  
Target Dna

Type I CRISPR-Cas3 uses an RNA-guided multi Cas-protein complex, Cascade, which detects and degrades foreign nucleic acids via the helicase-nuclease Cas3 protein. Despite many studies using cryoEM and smFRET, the precise mechanism of Cas3-mediated cleavage and degradation of target DNA remains elusive. Here we reconstitute the CRISPR-Cas3 system in vitro to show how the Escherichia coli Cas3 (EcoCas3) with EcoCascade exhibits collateral non-specific ssDNA cleavage and target specific DNA degradation. Partial binding of EcoCascade to target DNA with tolerated mismatches within the spacer sequence, but not the PAM, elicits collateral ssDNA cleavage activity of recruited EcoCas3. Conversely, stable binding with complete R-loop formation drives EcoCas3 to nick the non-target strand (NTS) in the bound DNA. Helicase-dependent unwinding then combines with trans ssDNA cleavage of the target strand and repetitive cis cleavage of the NTS to degrade the target dsDNA substrate. High-speed atomic force microscopy demonstrates that EcoCas3 bound to EcoCascade repeatedly reels and releases the target DNA, followed by target fragmentation. Together, these results provide a revised model for collateral ssDNA cleavage and target dsDNA degradation by CRISPR-Cas3, furthering understanding of type I CRISPR priming and interference and informing future genome editing tools.

scholarly journals In vitro evaluation of microbial adhesion on the different surface roughness of acrylic resin specific for ocular prosthesis

2018 ◽  
Vol 12 (02) ◽  
pp. 176-183 ◽  
Author(s):  
Agda Marobo Andreotti ◽  
Cecília Alves De Sousa ◽  
Marcelo Coelho Goiato ◽  
Emily Vivianne Freitas da Silva ◽  
Cristiane Duque ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Staphylococcus Epidermidis ◽  
Microbial Growth ◽  
Acrylic Resin ◽  
Microbial Adhesion ◽  
Force Microscopy ◽  
Atomic Force ◽  
Colony Forming Units ◽  
Ocular Prostheses

ABSTRACT Objective: The purpose of this study was to evaluate the influence of surface roughness in biofilm formation of four microorganisms (Staphylococcus epidermidis, Staphylococcus aureus, Enterococcus faecalis, and Candida albicans) on acrylic resin surface of ocular prostheses. Materials and Methods: Acrylic resin samples were divided into six groups according to polishing: Group 1200S (1200 grit + silica solution); Group 1200; Group 800; Group 400; Group 120 and Group unpolished. Surface roughness was measured using a profilometer and surface images obtained with atomic force microscopy. Microbial growth was evaluated after 4, 24, and 48 hours of incubation by counting colony-forming units. Statistical Analysis Used: For roughness, it was performed 1-way ANOVA and parametric Tukey test α5% (P ≤ 0.05). For CFU data found, it was applied Kruskal-Wallis and Mann-Whitney tests. Results: Group 120 and 400 presented the highest roughness values. For S. epidermidis and S. aureus, Group 1200S presented the lowest values of microbial growth. For E. faecalis at 4 hour, microbial growth was not observed. C. albicans did not adhere to the acrylic resin. Except for Group 1200S, different surface roughnesses did not statistically interfere with microbial adhesion and growth on acrylic surfaces of ocular prostheses. Conclusions: The roughness did not interfere with the microbial adhesion of the microorganisms evaluated. The use of silica decreases significantly microbial growth.

Sign in / Sign up

Export Citation Format

Share Document