scholarly journals Mechanisms of Enhanced Phonon Scattering in Nanostructured PbTe Based Thermoelectric Materials

2010 ◽  
Vol 16 (S2) ◽  
pp. 1484-1485
Author(s):  
J He ◽  
JR Sootsman ◽  
S Girard ◽  
MG Kanatzidis ◽  
VP Dravid

Extended abstract of a paper presented at Microscopy and Microanalysis 2010 in Portland, Oregon, USA, August 1 – August 5, 2010.

Author(s):  
Yaguo Wang ◽  
Xianfan Xu ◽  
Rama Venkatasubramanian

Thermoelectric materials are characterized with the figure of merit, ZT = S2σT/κ, where T is the temperature, S the Seebeck coefficient, σ the electrical conductivity and κ the thermal conductivity. Many researches have been focused on reducing lattice thermal conductivity through increasing phonon scattering at interfaces. Thin-film superlattices are one of the promising candidates for high ZT thermoelectric materials. Several theoretical models have been used to explain the large ZT in superlattice. One comes from the extra scattering channels at interfaces introduced by the hetero-structure. Another is a result of quantum confinement effect which reduces the phonon group velocity propagating perpendicularly through the superlattice layers through flattening the dispersion curve of acoustic phonons. In this work, ultrafast time-resolved measurements were conducted on Bi2Te3, Sb2Te3 and Bi2Te3/Sb2Te3 superlattice (SL) films to detect coherent acoustic phonons in these materials. Scattering of these phonons is revealed in the Bi2Te3/Sb2Te3 SLs, which comes from the interfaces of the hetero-structure in SL. Also, a decrease of acoustic phonon velocity resulted from folding and flattening of phonons branches is observed. Results show that both interface scattering and the reduced phonon velocity contribute to suppressing the heat transfer process.


2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Jae-Yeol Hwang ◽  
Eun Sung Kim ◽  
Syed Waqar Hasan ◽  
Soon-Mok Choi ◽  
Kyu Hyoung Lee ◽  
...  

Highly dense pore structure was generated by simple sequential routes using NaCl and PVA as porogens in conventional PbTe thermoelectric materials, and the effect of pores on thermal transport properties was investigated. Compared with the pristine PbTe, the lattice thermal conductivity values of pore-generated PbTe polycrystalline bulks were significantly reduced due to the enhanced phonon scattering by mismatched phonon modes in the presence of pores (200 nm–2 μm) in the PbTe matrix. We obtained extremely low lattice thermal conductivity (~0.56 W m−1 K−1at 773 K) in pore-embedded PbTe bulk after sonication for the elimination of NaCl residue.


2016 ◽  
Vol 3 (8) ◽  
pp. 1600035 ◽  
Author(s):  
Chenguang Fu ◽  
Haijun Wu ◽  
Yintu Liu ◽  
Jiaqing He ◽  
Xinbing Zhao ◽  
...  

2012 ◽  
Vol 24 (32) ◽  
pp. 4440-4444 ◽  
Author(s):  
Jiaqing He ◽  
Steven N. Girard ◽  
Jin-Cheng Zheng ◽  
Lidong Zhao ◽  
Mercouri G. Kanatzidis ◽  
...  

2020 ◽  
Vol 93 (11) ◽  
Author(s):  
Neophytos Neophytou ◽  
Vassilios Vargiamidis ◽  
Samuel Foster ◽  
Patrizio Graziosi ◽  
Laura de Sousa Oliveira ◽  
...  

Abstract The field of thermoelectric materials has undergone a revolutionary transformation over the last couple of decades as a result of the ability to nanostructure and synthesize myriads of materials and their alloys. The ZT figure of merit, which quantifies the performance of a thermoelectric material has more than doubled after decades of inactivity, reaching values larger than two, consistently across materials and temperatures. Central to this ZT improvement is the drastic reduction in the material thermal conductivity due to the scattering of phonons on the numerous interfaces, boundaries, dislocations, point defects, phases, etc., which are purposely included. In these new generation of nanostructured materials, phonon scattering centers of different sizes and geometrical configurations (atomic, nano- and macro-scale) are formed, which are able to scatter phonons of mean-free-paths across the spectrum. Beyond thermal conductivity reductions, ideas are beginning to emerge on how to use similar hierarchical nanostructuring to achieve power factor improvements. Ways that relax the adverse interdependence of the electrical conductivity and Seebeck coefficient are targeted, which allows power factor improvements. For this, elegant designs are required, that utilize for instance non-uniformities in the underlying nanostructured geometry, non-uniformities in the dopant distribution, or potential barriers that form at boundaries between materials. A few recent reports, both theoretical and experimental, indicate that extremely high power factor values can be achieved, even for the same geometries that also provide ultra-low thermal conductivities. Despite the experimental complications that can arise in having the required control in nanostructure realization, in this colloquium, we aim to demonstrate, mostly theoretically, that it is a very promising path worth exploring. We review the most promising recent developments for nanostructures that target power factor improvements and present a series of design ‘ingredients’ necessary to reach high power factors. Finally, we emphasize the importance of theory and transport simulations for materialoptimization, and elaborate on the insight one can obtain from computational tools routinely used in the electronic device communities. Graphical abstract


Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 781 ◽  
Author(s):  
Wanqing Dong ◽  
Zheng Zhou ◽  
Lijun Zhang ◽  
Mengdi Zhang ◽  
Peter Liaw ◽  
...  

Thermoelectric (TE) materials can interconvert waste heat into electricity, which will become alternative energy sources in the future. The high-entropy alloys (HEAs) as a new class of materials are well-known for some excellent properties, such as high friction toughness, excellent fatigue resistance, and corrosion resistance. Here, we present a series of HEAs to be potential candidates for the thermoelectric materials. The thermoelectric properties of YxCoCrFeNi, GdxCoCrFeNiCu, and annealed Al0.3CoCrFeNi were investigated. The effects of grain size and formation of the second phase on thermoelectric properties were revealed. In HEAs, we can reduce the thermal conductivity by controlling the phonon scattering due to the considerable complexity of the alloys. The Y, Gd-doped HEAs are competitive candidate thermoelectric materials for energy conversion in the future.


2007 ◽  
Vol 1044 ◽  
Author(s):  
Xiaohua Ji ◽  
Jian He ◽  
Paola N. Alboni ◽  
Terry M. Tritt ◽  
Joseph W. Kolis

AbstractNanostructured materials have been shown to enhance phonon scattering and improve the figure of merit of thermoelectric materials. Solvothermal syntheses of nano-engineered CoSb3 skutterudite have been studied in the present work in which CoCl2 and SbCl3 were used as precursors and NaBH4 as a reductant. Elemental, structural and morphology characterization techniques including: XRD, SEM, TEM and EDAX were used to identify and characterize the products. NaBH4 was found to be a necessary factor in forming cobalt antimonide. It was detected the products' phase transited from Sb2Co to CoSb3 in conjunction with the amount increase of NaBH4. The change of synthesis time and temperature contributed little on the products' phases under the present experimental routes. Single-phased CoSb3 skutterudites was obtained from the solvothermal syntheses combined with an acid wash. The as-prepared CoSb3 powders consist of irregular nanoparticles with 15∼20 nm in size. A possible chemical mechanism was also discussed.


2020 ◽  
Vol 30 (17) ◽  
pp. 1910039 ◽  
Author(s):  
Cynthia Rodenkirchen ◽  
Matteo Cagnoni ◽  
Stefan Jakobs ◽  
Yudong Cheng ◽  
Jens Keutgen ◽  
...  

2020 ◽  
Vol 10 (2) ◽  
pp. 265-271
Author(s):  
Adriana Valério ◽  
Rafaela F.S. Penacchio ◽  
Maurício B. Estradiote ◽  
Marli R. Cantarino ◽  
Fernando A. Garcia ◽  
...  


Author(s):  
T. D. Musho ◽  
D. G. Walker

Over the last decade, nano-structured materials have shown a promising avenue for enhancement of the thermoelectric figure of merit. These performance enhancements in most cases have been a direct result of selectively modifying certain geometric attributes that alter the thermal or electrical transport in a desirable fashion. More often, models used to study the electrical and/or thermal transport are calculated independent of each other. However, studies have suggested electrical and thermal transport are intimately linked at the nanoscale. This provides an argument for a more rigorous treatment of the physics in an effort to capture the response of both electrons and phonons simultaneously. A simulation method has been formulated to capture the electron-phonon interaction of nanoscale electronics through a coupled non-equilibrium Greens function (NEGF) method. This approach is unique because the NEGF electron solution and NEGF phonon solution have only been solved independently and have never been coupled to capture a self-consistent inelastic electron-phonon scattering. One key aspect of this formalism is that the electron and phonon description is derived from a quantum point of view and no correction terms are necessary to account for the probabilistic nature of the transport. Additionally, because the complete phonon description is solved, scattering rates of individual phonon frequencies can be investigated to determine how electron-phonon scattering of particular frequencies influences the transport. This computational method is applied to the study of Si/Ge nanostructured superlattice thermoelectric materials.


Sign in / Sign up

Export Citation Format

Share Document