Synchrotron X-ray Microtomography with Improved Image Quality by Ring Artifacts Correction for Structural Analysis of Insects

2017 ◽  
Vol 23 (5) ◽  
pp. 938-944
Author(s):  
Shengkun Yao ◽  
Yunbing Zong ◽  
Jiadong Fan ◽  
Zhibin Sun ◽  
Jianhua Zhang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
Image Quality ◽  
Structural Information ◽  
Single Point ◽  
Tomographic Reconstruction ◽  
Superior Performance ◽  
Tomographic Images ◽  
X Ray ◽  
Reduced Ring ◽  
Reconstruction Ring

AbstractRing artifacts are undesirable and complicate the analysis and interpretation of microstructures in synchrotron X-ray microtomography. Here, we propose a new method to improve the image quality of an object by removing the ring artifacts and investigate the efficiency of this process with tomographic images of a dried Tenebrio molitor. In this method, before the tomographic reconstruction, ring artifacts were identified and located in the sinograms as line artifacts. Then, the identified line artifacts were corrected as single point noise via image processing of the original projections. Eventually, the corresponding line artifacts were removed, resulting in reduced ring artifacts in the reconstructed tomographic images. Simulations verified the efficiency of the proposed method. This method was successfully applied for the structural analysis of the insect T. molitor, showing superior performance in reducing ring artifacts in the tomographic image without noticeable loss of structural information.

scholarly journals Automatic projection image registration for nanoscale X-ray tomographic reconstruction

2018 ◽  
Vol 25 (6) ◽  
pp. 1819-1826 ◽  
Author(s):  
Haiyan Yu ◽  
Sihao Xia ◽  
Chenxi Wei ◽  
Yuwei Mao ◽  
Daniel Larsson ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Imaging Modality ◽  
Energy State ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
Visual Assessment ◽  
Superior Performance ◽  
X Rays ◽  
X Ray ◽  
Projection Images

Novel developments in X-ray sources, optics and detectors have significantly advanced the capability of X-ray microscopy at the nanoscale. Depending on the imaging modality and the photon energy, state-of-the-art X-ray microscopes are routinely operated at a spatial resolution of tens of nanometres for hard X-rays or ∼10 nm for soft X-rays. The improvement in spatial resolution, however, has led to challenges in the tomographic reconstruction due to the fact that the imperfections of the mechanical system become clearly detectable in the projection images. Without proper registration of the projection images, a severe point spread function will be introduced into the tomographic reconstructions, causing the reduction of the three-dimensional (3D) spatial resolution as well as the enhancement of image artifacts. Here the development of a method that iteratively performs registration of the experimentally measured projection images to those that are numerically calculated by reprojecting the 3D matrix in the corresponding viewing angles is shown. Multiple algorithms are implemented to conduct the registration, which corrects the translational and/or the rotational errors. A sequence that offers a superior performance is presented and discussed. Going beyond the visual assessment of the reconstruction results, the morphological quantification of a battery electrode particle that has gone through substantial cycling is investigated. The results show that the presented method has led to a better quality tomographic reconstruction, which, subsequently, promotes the fidelity in the quantification of the sample morphology.

scholarly journals Merging in-solution X-ray and neutron scattering data allows fine structural analysis of membrane-protein detergent complexes

2018 ◽  
Author(s):  
Gaetan Dias-Mirandela ◽  
Giulia Tamburrino ◽  
Miloš T Ivanović ◽  
Felix M Strnad ◽  
Olwyn Byron ◽  
...  
Keyword(s):  
Structural Analysis ◽  
Membrane Protein ◽  
Neutron Scattering ◽  
Structural Information ◽  
Scattering Data ◽  
Membrane Protein Complex ◽  
X Ray ◽  
Ab Initio Approach ◽  
Atomic Analysis ◽  
Sans Data

In-solution small angle X-ray and neutron scattering (SAXS/SANS) have become popular methods to characterize the structure of membrane proteins, solubilized by either detergents or nanodiscs. SANS studies of protein-detergent complexes usually require deuterium-labelled proteins or detergents, which in turn often lead to problems in their expression or purification. Here, we report an approach whose novelty is the combined analysis of SAXS and SANS data from an unlabeled membrane protein complex in solution in two complementary ways. Firstly, an explicit atomic analysis, including both protein and detergent molecules, using the program WAXSiS which has been adapted to predict SANS data. Secondly, the use of MONSA which allows to discriminate between detergent head- and tail-groups in an ab initio approach. Our approach is readily applicable to any detergent-solubilized protein and provides more detailed structural information on protein-detergent complexes from unlabeled samples than SAXS or SANS alone.

X-ray absorption spectroscopy principles and practical use in materials analysis

2020 ◽  
Vol 5 (4) ◽  
Author(s):  
Wolfgang Grünert ◽  
Konstantin Klementiev
Keyword(s):  
Fine Structure ◽  
Structural Analysis ◽  
Disordered Systems ◽  
Structural Information ◽  
Research Strategies ◽  
Edge Structure ◽  
X Ray ◽  
Absorption Fine ◽  
Wide Range ◽  
X Ray Absorption

AbstractThe X-ray Absorption Fine Structure (XAFS) with its subregions X-ray Absorption Near-edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) is a powerful tool for the structural analysis of materials, which is nowadays a standard component of research strategies in many fields. This review covers a wide range of topics related to its measurement and use: the origin of the fine structure, its analytical potential, derived from the physical basis, the environment for measuring XAFS at synchrotrons, including different measurement geometries, detection modes, and sample environments, e. g. for in-situ and operando work, the principles of data reduction, analysis, and interpretation, and a perspective on new methods for structure analysis combining X-ray absorption with X-ray emission. Examples for the application of XAFS have been selected from work with heterogeneous catalysts with the intention to demonstrate the strength of the method providing structural information about highly disperse and disordered systems, to illustrate pitfalls in the interpretation of results (e. g. by neglecting the averaged character of the information obtained) and to show how its merits can be further enhanced by combination with other methods of structural analysis and/or spectroscopy.

scholarly journals Improved dynamic imaging of multiphase flow by constrained tomographic reconstruction

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Peter Winkel Rasmussen ◽  
Henning Osholm Sørensen ◽  
Stefan Bruns ◽  
Anders Bjorholm Dahl ◽  
Anders Nymark Christensen
Keyword(s):  
Image Quality ◽  
Tomographic Reconstruction ◽  
Dynamic Imaging ◽  
Reconstruction Technique ◽  
Static System ◽  
Dynamic Reconstruction ◽  
High Quality ◽  
High Image Quality ◽  
X Ray ◽  
Flow Processes

AbstractDynamic tomography has become an important technique to study fluid flow processes in porous media. The use of laboratory X-ray tomography instruments is, however, limited by their low X-ray brilliance. The prolonged exposure times, in turn, greatly limit temporal resolution. We have developed a tomographic reconstruction algorithm that maintains high image quality, despite reducing the exposure time and the number of projections significantly. Our approach, based on the Simultaneous Iterative Reconstruction Technique, mitigates the problem of few and noisy exposures by utilising a high-quality scan of the system before the dynamic process is started. We use the high-quality scan to initialise the first time step of the dynamic reconstruction. We further constrain regions of the dynamic reconstruction with a segmentation of the static system. We test the performance of the algorithm by reconstructing the dynamics of fluid separation in a multiphase system. The algorithm is compared quantitatively and qualitatively with several other reconstruction algorithms and we show that it can maintain high image quality using only a fraction of the normally required number of projections and with a substantially larger noise level. By robustly allowing fewer projections and shorter exposure, our algorithm enables the study of faster flow processes using laboratory tomography instrumentation but it can also be used to improve the reconstruction quality of dynamic synchrotron experiments.

Direct visualization of phase-separated domains in lipid membranes

1978 ◽  
Vol 36 (2) ◽  
pp. 290-291
Author(s):  
S. W. Hui ◽  
T. P. Stewart
Keyword(s):  
Lipid Membranes ◽  
Structural Information ◽  
Freeze Fracture ◽  
Biological Molecules ◽  
Vacuum Drying ◽  
Direct Visualization ◽  
X Ray Diffraction ◽  
Electron Microscopic ◽  
X Ray ◽  
Hydrocarbon Chains

Direct electron microscopic study of biological molecules has been hampered by such factors as radiation damage, lack of contrast and vacuum drying. In certain cases, however, the difficulties may be overcome by using redundent structural information from repeating units and by various specimen preservation methods. With bilayers of phospholipids in which both the solid and fluid phases co-exist, the ordering of the hydrocarbon chains may be utilized to form diffraction contrast images. Domains of different molecular packings may be recgnizable by placing properly chosen filters in the diffraction plane. These domains would correspond to those observed by freeze fracture, if certain distinctive undulating patterns are associated with certain molecular packing, as suggested by X-ray diffraction studies. By using an environmental stage, we were able to directly observe these domains in bilayers of mixed phospholipids at various temperatures at which their phases change from misible to inmissible states.

RNA polymerase: Preparation and structural analysis of helical polymers

1984 ◽  
Vol 42 ◽  
pp. 152-153
Author(s):  
E. Loren Buhle ◽  
Pamela Rew ◽  
Ueli Aebi
Keyword(s):  
Structural Analysis ◽  
Rna Polymerase ◽  
Molecular Level ◽  
X Ray Diffraction ◽  
Helical Polymers ◽  
X Ray ◽  
E Coli ◽  
The Past ◽  
Ordered Arrays ◽  
Low Ionic Strength

While DNA-dependent RNA polymerase represents one of the key enzymes involved in transcription and ultimately in gene expression in procaryotic and eucaryotic cells, little progress has been made towards elucidation of its 3-D structure at the molecular level over the past few years. This is mainly because to date no 3-D crystals suitable for X-ray diffraction analysis have been obtained with this rather large (MW ~500 kd) multi-subunit (α2ββ'ζ). As an alternative, we have been trying to form ordered arrays of RNA polymerase from E. coli suitable for structural analysis in the electron microscope combined with image processing. Here we report about helical polymers induced from holoenzyme (α2ββ'ζ) at low ionic strength with 5-7 mM MnCl2 (see Fig. 1a). The presence of the ζ-subunit (MW 86 kd) is required to form these polymers, since the core enzyme (α2ββ') does fail to assemble into such structures under these conditions.

Image Quality Analysis of X-ray Grating Interferometer Using Integrating-bucket Method

2020 ◽  
Vol 64 (2) ◽  
pp. 20503-1-20503-5
Author(s):  
Faiz Wali ◽  
Shenghao Wang ◽  
Ji Li ◽  
Jianheng Huang ◽  
Yaohu Lei ◽  
...  
Keyword(s):  
Image Quality ◽  
Phase Contrast ◽  
Quality Analysis ◽  
Phase Contrast Imaging ◽  
Phase Image ◽  
Contrast Imaging ◽  
High Quality ◽  
Image Quality Analysis ◽  
X Ray ◽  
Grating Interferometer

Abstract Grating-based x-ray phase-contrast imaging has the potential to enhance image quality and provide inner structure details non-destructively. In this work, using grating-based x-ray phase-contrast imaging system and employing integrating-bucket method, the quantitative expressions of signal-to-noise ratios due to photon statistics and mechanical error are analyzed in detail. Photon statistical noise and mechanical error are the main sources affecting the image noise in x-ray grating interferometry. Integrating-bucket method is a new phase extraction method translated to x-ray grating interferometry; hence, its image quality analysis would be of great importance to get high-quality phase image. The authors’ conclusions provide an alternate method to get high-quality refraction signal using grating interferometer, and hence increases applicability of grating interferometry in preclinical and clinical usage.

Characterizations of Synthetic 8mol% YSZ with Comparison to 3mol %YSZ for HT-SOFC

2020 ◽  
Vol 38 (4A) ◽  
pp. 491-500
Author(s):  
Abeer F. Al-Attar ◽  
Saad B. H. Farid ◽  
Fadhil A. Hashim
Keyword(s):  
Ionic Conductivity ◽  
Electrochemical Impedance ◽  
Structural Information ◽  
Impedance Analysis ◽  
High Energy ◽  
Yttria Stabilized Zirconia ◽  
X Ray Diffraction ◽  
Stabilized Zirconia ◽  
Powder Morphology ◽  
X Ray

In this work, Yttria (Y2O3) was successfully doped into tetragonal 3mol% yttria stabilized Zirconia (3YSZ) by high energy-mechanical milling to synthesize 8mol% yttria stabilized Zirconia (8YSZ) used as an electrolyte for high temperature solid oxide fuel cells (HT-SOFC). This work aims to evaluate the densification and ionic conductivity of the sintered electrolytes at 1650°C. The bulk density was measured according to ASTM C373-17. The powder morphology and the microstructure of the sintered electrolytes were analyzed via Field Emission Scanning Electron Microscopy (FESEM). The chemical analysis was obtained with Energy-dispersive X-ray spectroscopy (EDS). Also, X-ray diffraction (XRD) was used to obtain structural information of the starting materials and the sintered electrolytes. The ionic conductivity was obtained through electrochemical impedance spectroscopy (EIS) in the air as a function of temperatures at a frequency range of 100(mHz)-100(kHz). It is found that the 3YSZ has a higher density than the 8YSZ. The impedance analysis showed that the ionic conductivity of the prepared 8YSZ at 800°C is0.906 (S.cm) and it was 0.214(S.cm) of the 3YSZ. Besides, 8YSZ has a lower activation energy 0.774(eV) than that of the 3YSZ 0.901(eV). Thus, the prepared 8YSZ can be nominated as an electrolyte for the HT-SOFC.

X-Ray Nanotomography (XRMT) Tool for Non-Destructive High-Resolution Imaging of ICs

2001 ◽  
Author(s):  
Wenbing Yun ◽  
Steve Wang ◽  
David Scott ◽  
Kenneth W. Nill ◽  
Waleed S. Haddad
Keyword(s):  
High Resolution ◽  
Process Development ◽  
3D Visualization ◽  
Tomographic Reconstruction ◽  
Reconstruction Algorithms ◽  
X Ray ◽  
Visualization Software ◽  
Volumetric Reconstruction ◽  
Resolution Imaging ◽  
Non Destructive

Abstract A high-resolution table-sized x-ray nanotomography (XRMT) tool has been constructed that shows the promise of nondestructively imaging the internal structure of a full IC stack with a spatial resolution better than 100 nm. Such a tool can be used to detect, localize, and characterize buried defects in the IC. By collecting a set of X-ray projections through the full IC (which may include tens of micrometers of silicon substrate and several layers of Cu interconnects) and applying tomographic reconstruction algorithms to these projections, a 3D volumetric reconstruction can be obtained, and analyzed for defects using 3D visualization software. XRMT is a powerful technique that will find use in failure analysis and IC process development, and may facilitate or supplant investigations using SEM, TEM, and FIB tools, which generally require destructive sample preparation and a vacuum environment.

Sign in / Sign up

Export Citation Format

Share Document