Benefits of Microwave-Assisted Processing Go Beyond Time Savings

2009 ◽  
Vol 17 (5) ◽  
pp. 28-33
Author(s):  
Richard T. Giberson ◽  
Mark A. Sanders

Microwave-assisted processing of biological specimens, from its inception, has been a methodology that promised time savings over conventional processing methods [1]. It has taken almost 30 years to define and control the significant variables associated with microwave processing [2]. Recent research combined with improved technology have helped in the identification and control of the experimental variables associated with microwave-assisted processing [2–7]. Stated simply they are: (1) constant sample temperature control in conjunction with continuous microwave irradiation [3–4], (2) control of wattage in the microwave device (the ability to control microwave power in the same manner as a dimmer switch controls a light) [2–5], and (3) energy uniformity in the microwave cavity [3–4].

Author(s):  
Mousumi Chakraborty ◽  
Sanjay Baweja ◽  
Sunita Bhagat ◽  
TejpalSingh Chundawat

Abstract In the present study Schiff’s bases are synthesized by the conventional as well as by microwave irradiation. Excellent yield within short reaction time is obtained using microwave irradiation along with other advantages like mild reaction condition, non-hazardous and safer environmental conditions. The effects of temperature, reactant molar ratio, and microwave power variation on yield are observed. Mathematical model has been developed using matlab software to obtain the yield as a function of microwave power. Kinetic study of the reaction has also been attempted. Schiff’s bases structures are confirmed by IR, 1HNMR, Mass Spectra and elemental analysis.


Author(s):  
Qin Like ◽  
Dai Jun ◽  
Yuan Liqun

Microwave-assisted crushing and grinding can improve efficiency and reduce energy consumption. This paper takes rock grains with galena and calcite as the research object to establish a two-dimensional computational model through the finite difference software FLAC2D. It analyzes the process and law of mineral boundary failure under microwave irradiation, and assesses the effects of four factors, namely, microwave irradiation time, power density, mineral crystal size, and mineral content, on mineral boundary failure. Results indicate an optimal microwave irradiation period for the rapid failure of mineral boundary. Moreover, irradiation time and energy consumption can be reduced by increasing the microwave power density. However, irradiation time and energy consumption are basically unchanged when the microwave power density is above a certain threshold. Mineral content slightly affects the microwave irradiation time, whereas mineral crystal size significantly affects the microwave irradiation time. In addition, a larger-sized mineral crystal requires less irradiation time and energy consumption to reach the same failure rate. However, irradiation time and energy consumption slightly change when the crystal size is larger than a certain value.


2018 ◽  
Vol 279 ◽  
pp. 230-234 ◽  
Author(s):  
Pham Van Thinh ◽  
Nguyen Duy Trinh ◽  
Nguyen Thi Thuong ◽  
Van Thi Thanh Ho ◽  
Bui Thi Phuong Quynh ◽  
...  

In this study, we prepared the exfoliated graphite (EG) using microwave-assisted exfoliation synthesis exfoliated graphite from the inexpensive natural Vietnamese graphite flakes as the precursors. The exfoliation of graphite was conducted employing intercalation method using H2O2 as oxidizing agent and H2SO4 as intercalating agent. The influent of the precursors (VH2O2/VH2SO4) (1.0/20 – 2.0/20), pH value of EG (1-6), time intercalation (70-120 min), microwave power (180-720 W), and time microwave (10-60 second) in the exfoliation volume of EG was investigated.


Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2167
Author(s):  
Hoang Chinh Nguyen ◽  
Fu-Ming Wang ◽  
Kim Khue Dinh ◽  
Thanh Truc Pham ◽  
Horng-Yi Juan ◽  
...  

This study developed a microwave-mediated noncatalytic esterification of oleic acid for producing ethyl biodiesel. The microwave irradiation process outperformed conventional heating methods for the reaction. A highest reaction conversion, 97.62%, was achieved by performing esterification with microwave irradiation at a microwave power of 150 W, 2:1 ethanol:oleic acid molar ratio, reaction time of 6 h, and temperature of 473 K. A second-order reaction model (R2 of up to 0.997) was established to describe esterification. The reaction rate constants were promoted with increasing microwave power and temperature. A strong linear relation of microwave power to pre-exponential factors was also established, and microwave power greatly influenced the reaction due to nonthermal effects. This study suggested that microwave-assisted noncatalytic esterification is an efficient approach for biodiesel synthesis.


2010 ◽  
Vol 113-116 ◽  
pp. 2329-2332
Author(s):  
Wei Yang ◽  
Xiao Jing Zhao ◽  
Li Li Xu ◽  
Hui Zheng ◽  
Jin Yu Lu

Microwave-assisted extraction (MAE) is first used to extract baicalin from Scutellaria baicalensis extractive drug residue to study the value of Scutellaria baicalensis extractive drug residue. The content of baicalin in the Scutellaria baiacalensis extractive drug residue was determined by UV. Effects of different granularity sizes of its extractive drug residue, different microwave output power, duration of microwave irradiation and different concentration of ethanol on yield of baicalin were discussed. The results indicated that the microwave power was 500w, granularity of Scutellaria baicalensis extractive drug residue was 0.25mm, 30% ethanol was as solvent, duration of microwave irradiation was 3min.The yield of baicalin arrived 9~10%.The conclusion is that some active component such as Baicalin is still in Scutellaria baicalensis extractive drug residue, Scutellaria baicalensis extractive drug residue can be reused as resources again.


2019 ◽  
Vol 16 (3) ◽  
pp. 194-201 ◽  
Author(s):  
Renu Bala ◽  
Vandana Devi ◽  
Pratibha Singh ◽  
Navjot Kaur ◽  
Pawandeep Kaur ◽  
...  

Background: Tetrahydroindazole, a member of the fused-pyrazole system, is a least studied class of heterocyclic compounds owing to its scarcity in nature. However, a large number of synthetically prepared tetrahydroindazoles are known to show a variety of biological activities such as interleukin- 2 inducible T-Cell kinase inhibitors, AMPA receptor positive allosteric modulators, antitumor, antituberculosis, anti-inflammatory and antimicrobial activities. Vilsmeier-Haack reaction is one of the most important chemical reactions used for formylation of electron rich arenes. Even though Vilsmeier- Haack reaction was studied on a wide variety of hydrazones derived from active methylene compounds, literature lacks the examples of the use of 4-substituted cyclohexanones as a substrate for the synthesis of 4,5,6,7-tetrahydroindazoles. The study of the reaction of Vilsmeier-Haack reagent with hydrazones derived from cyclic keto compounds having active methylene has been considered the interested topic of investigation. In the present study, ethyl cyclohexanone-4-carboxylate was treated with one equivalent of various hydrazines for two hours and the resulted hydrazones were further treated with an OPC-VH reagent (Vilsmeier-Haack reagent isolated from phthaloyl dichloride and N,Ndimethylformamide) afforded 4,5,6,7-tetrahydroindazoles in excellent yields. The synthesized compounds 4a-f and 5a-f were screened for their antioxidant activities using the DPPH radical scavenging assay. The target compounds were synthesized regioselectively using 4+1 approach in excellent yields. A number of experiments using both conventional heating as well as microwave irradiation methods were tried and on comparison, microwave irradiation method was found excellent in terms of easy work up, high chemical yields, shortened reaction times, clean and, no by-products formation. Some of the synthesized compounds showed significant antioxidant activity. The microwave assisted synthesis of 4,5,6,7-tetrahydroindazoles from ethyl cyclohexanone-4-carboxylate has been reported under mild conditions in excellent yield. Easy work up, high chemical yield, shortened reaction times, clean and no by-products formation are the major advantages of this protocol. These advantages may make this method useful for chemists who are interested in developing novel 4,5,6,7-tetrahydroindazole based drugs.


2020 ◽  
Vol 7 (3) ◽  
pp. 183-195
Author(s):  
Musa Özil ◽  
Emre Menteşe

Background: Benzoxazole, containing a 1,3-oxazole system fused with a benzene ring, has a profound effect on medicinal chemistry research owing to its important pharmacological activities. On the other hand, the benzoxazole derivative has exhibited important properties in material science. Especially in recent years, microwave-assisted synthesis is a technique that can be used to increase diversity and quick research in modern chemistry. The utilization of microwave irradiation is beneficial for the synthesis of benzoxazole in recent years. In this focused review, we provide a metaanalysis of studies on benzoxazole in different reaction conditions, catalysts, and starting materials by microwave technique so far, which is different from conventional heating. Methods: Synthesis of different kind of benzoxazole derivatives have been carried out by microwave irradiation. The most used method to obtain benzoxazoles is the condensation of 2-aminophenol or its derivatives with aldehydes, carboxylic acids, nitriles, isocyanates, and aliphatic amines. Results: Benzoxazole system and its derivatives have exhibited a broad range of pharmacological properties. Thus, many scientists have remarked on the importance of the synthesis of different benzoxazole derivatives. Conventional heating is a relatively inefficient and slow method to convey energy in orientation to the reaction medium. However, the microwave-assisted heating technique is a more effective interior heating by straight coupling of microwave energy with the molecules. Conclusion: In this review, different studies were presented on the recent details accessible in the microwave- assisted techniques on the synthesis of the benzoxazole ring. It presents all examples of such compounds that have been reported from 1996 to the present. Benzoxazoles showed an extensive class of chemical substances not only in pharmaceutical chemistry but also in dyestuff, polymer industries, agrochemical, and optical brighteners. Thus the development of fast and efficient achievement of benzoxazoles with a diversity of substituents in high yield is getting more noteworthy. As shown in this review, microwave-assisted synthesis of benzoxazoles is a very effective and useful technique.


2020 ◽  
Vol 3 (1) ◽  
pp. 27
Author(s):  
Raúl Eduardo Gordillo-Cruz ◽  
Liliana Gonzalez-Reyes ◽  
Milton Coporo-Reyes ◽  
Nieves Zavala-Segovia ◽  
Bernardo A. Frontana-Uribe ◽  
...  

An array of 2,4-disubstituted thiazolines was obtained through Asinger reaction approach from the straightforward treatment of diverse aldehydes/ketones with 1-mercaptopropan-2-one, in the presence of NH3 assisted by microwave irradiation, displaying similar and sometimes higher yields, as well as shorter reaction times that traditional Asinger reaction conditions at room and lower temperatures.


2021 ◽  
Vol 67 (1) ◽  
Author(s):  
Monika Aniszewska ◽  
Krzysztof Słowiński ◽  
Ewa Tulska ◽  
Witold Zychowicz

AbstractThe paper proposes the use of microwave irradiation to lower the initial moisture content of wood chips. The study involved willow and fir chips fractionated by means of a sieve separator and unfractionated ash chips. The wood chips were exposed to a constant microwave power of 800 W for 30 s, 60 s, 120 s and 180 s. The chips were weighed before and after irradiation to measure loss of moisture. It was found that the decline in moisture content increased with wood chip size for a given irradiation time and microwave power. The initial moisture content of wood chips was not found to significantly affect loss of moisture as the drying rates of wood chips with higher and lower moisture content exposed to microwaves were not statistically different. The results showed that irradiation intensity increased with the time of exposure to microwaves and unit radiant energy per unit of evaporated moisture decreased with increasing wood chip size in the 3.15–31.50 mm range.


Sign in / Sign up

Export Citation Format

Share Document