Low-profile U-shaped DRA for ultra-wideband applications

2016 ◽  
Vol 9 (3) ◽  
pp. 621-627 ◽  
Author(s):  
Idris Messaoudene ◽  
Tayeb A. Denidni ◽  
Abdelmadjid Benghalia
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Radiation Patterns ◽  
Wide Bandwidth ◽  
Operating Band ◽  
Low Profile ◽  
Measurement Results

In this paper, a microstrip-fed U-shaped dielectric resonator antenna (DRA) is simulated, designed, and fabricated. This antenna, in its simple configuration, operates from 5.45 to 10.8 GHz. To enhance its impedance bandwidth, the ground plane is first modified, which leads to an extended bandwidth from 4 to 10.8 GHz. Then by inserting a rectangular metallic patch inside the U-shaped DRA, the bandwidth is increased more to achieve an operating band from 2.65 to 10.9 GHz. To validate these results, an experimental antenna prototype is fabricated and measured. The obtained measurement results show that the proposed antenna can provide an ultra-wide bandwidth and a symmetric bidirectional radiation patterns. With these features, the proposed antenna is suitable for ultra-wideband applications.

scholarly journals A Compact Dielectric Resonator Antenna Excited by a Planar Monopole Patch for Wideband Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Xuping Li ◽  
Yabing Yang ◽  
Fei Gao ◽  
Hanqing Ma ◽  
Xiaowei Shi
Keyword(s):  
Reflection Coefficient ◽  
Dielectric Resonator ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
High Radiation ◽  
Ansoft Hfss ◽  
Measurement Results ◽  
Broadside Radiation ◽  
Operation Frequency

A compact dielectric resonator antenna (DRA) suitable for wideband applications is presented in this paper. The proposed antenna is mainly composed by a notched cylindrical dielectric resonator (DR) coated with a metal surface on the top and a finite ground plane where the presented DR is placed. This antenna is very simple in structure and has a very low overall height of0.14λminat its lowest operation frequency. A comprehensive parametric study is carried out based on Ansoft HFSS to optimize the bandwidth. The proposed antenna has been successfully simulated, optimized, fabricated, and measured. The measurement results demonstrate that the proposed design produces an impedance bandwidth of more than 75%, ranging from 2.9 GHz to 6.7 GHz for the reflection coefficient less than −10 dB. In particular, consistent broadside radiation patterns, stable gain, and high radiation efficiency are also obtained within the operation frequency band.

scholarly journals Dual Notched-Band Crescent Moon Dielectric Resonator Antenna

2021 ◽  
Vol 25 (1) ◽  
pp. 11-19
Author(s):  
Mohamed Debab ◽  
◽  
Amina Bendaoudi ◽  
Zoubir Mahdjoub ◽  
◽  
...  
Keyword(s):  
Frequency Band ◽  
Dielectric Resonator ◽  
Satellite Communication ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Printed Antenna ◽  
Antenna Structure

In this article, a dual-band notched ultra-wideband (UWB) dielectric resonator antenna is proposed. The antenna structure consists of Crescent Moon Dielectric Resonator (CMDR) fed by a stepped microstrip monopole printed antenna, partial ground plane, and an I-shaped stub. The Crescent Moon dielectric resonator is placed on the microstrip monopole printed antenna to achieve wide impedance bandwidth, and the I-shaped stub is utilized to improve impedance bandwidth for the WiMAX band. A comprehensive parametric study is carried out using HFSS software to achieve the optimum antenna performance and optimize the bandwidth of the proposed antenna. The entire band is useful with two filtered bands at 5.5 GHz and 6.8 GHz by the creation of notches. The band’s rejection, WLAN band (5.2–5.7 GHz), and the downlink frequency band of ITU 7 GHz-band for satellite communication (6.5–7.3 GHz) is realized by inserting G-shaped and C-shaped slots in the ground. The simulation results demonstrate that the proposed CMDR antenna achieves satisfactory UWB performance, with an impedance bandwidth of around 88.7%, covers the frequency band of 3.2 - 8.3 GHz, excluding a rejection band for the WLAN and ITU 7 GHz band. The CMDR is simulated using HFSS and CST high-frequency simulators.

scholarly journals T-Shaped Compact Dielectric Resonator Antenna for UWB Application

2019 ◽  
Vol 8 (3) ◽  
pp. 57-63
Author(s):  
A. Zitouni ◽  
N. Boukli-Hacene
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Printed Antenna ◽  
Frequency Range ◽  
Radiation Characteristics ◽  
Antenna Structure ◽  
Antenna Performance

In this article, a novel T-shaped compact dielectric resonator antenna for ultra-wideband (UWB) application is presented and studied. The proposed DRA structure consists of T-shaped dielectric resonator fed by stepped microstrip monopole printed antenna, partial ground plane and an inverted L-shaped stub. The inverted L-shaped stub and parasitic strip are utilized to improve impedance bandwidth. A comprehensive parametric study is carried out using HFSS software to achieve the optimum antenna performance and optimize the bandwidth of the proposed antenna. From the simulation results, it is found that the proposed antenna structure operates over a frequency range of 3.45 to more than 28 GHz with a fractional bandwidth over 156.12%, which covers UWB application, and having better gain and radiation characteristics.

An ultra-wideband rectangular ring dielectric resonator antenna integrated with hybrid shaped patch for wireless applications

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Parikshit Vasisht ◽  
Robert Mark ◽  
Neela Chattoraj
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Radiation Efficiency ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Wireless Applications ◽  
High Impedance ◽  
Conductor Loss ◽  
Uwb Applications

Abstract A new wideband omni-directional compact rectangular ring dielectric resonator antenna (RRDRA) fused with slotted bevel shaped patch antenna is presented for the ultra-wideband (UWB) applications. The RRDR (rectangular ring dielectric resonator) is employed to generate lower order radiating modes with merge with the modes of patch to obtain high impedance bandwidth in UWB region. Further, RRDR use led to reduction in overall conductor loss to achieve high radiation efficiency. The proposed RRDRA structure achieved an impedance bandwidth covering the frequency range from 2.6–15.6 GHz, or ∼142%. The measured results show that the proposed DRA provides peak measured gain of 6.2 dBi and radiation efficiency of 90% at resonant frequency 6.3 GHz with stable omni-directional monopole like radiation patterns with low cross-polarization. The proposed antenna has a short ground plane of size 40 × 40 × 11.6 mm3 or ∼0.34λ 0 × 0.34λ 0 × 0.10λ 0 at 2.6 GHz.

A new simple compact ultra-wideband dielectric resonator antenna with enhanced bandwidth and improved radiation pattern

2015 ◽  
Vol 8 (2) ◽  
pp. 335-340
Author(s):  
Seyyed Hadi Seyyedhatami ◽  
Ramazan Ali Sadeghzadeh
Keyword(s):  
Radiation Pattern ◽  
Dielectric Resonator ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Frequency Range ◽  
Wireless System ◽  
Operating Frequency Range ◽  
Compact Size

A new simple compact ultra-wideband (UWB) dielectric resonator antenna is presented. The antenna consists of a modified stepped microstrip-fed monopole printed antenna loaded with a rectangular dielectric resonator, truncated ground plane, and a parasitic strip underneath the dielectric resonator (DR). Using an optimized truncated ground plane and a combination of stepped feed line with DR an ultra-wide impedance bandwidth of 153% for (∣S11∣ ≤ −10 dB), covering the frequency range of (3.7–28 GHz) is achieved. The added parasitic strip can improve the radiation pattern, especially at high frequencies. The proposed antenna covers almost the entire UWB (3.1–10.6 GHz), Ku (12.4–18 GHz), and K (18–26.6 GHz) frequency bands. Also this antenna has an omnidirectional and stable radiation pattern over the whole operating frequency range and a compact size of (15 × 20 × 5.8 mm3) that make it suitable for wideband wireless system applications. This structure is light weight and can be easily fabricated. A prototype is built and measured. The simulated and measured results are in good agreement.

Laterally Placed CDRA with Triangular Notches for Ultra Wideband Applications

Frequenz ◽  
2017 ◽  
Vol 72 (1-2) ◽  
pp. 1-6
Author(s):  
Dileep Sankaranarayanan ◽  
Duggirala Venkata Kiran ◽  
Biswajeet Mukherjee
Keyword(s):  
Resonant Frequency ◽  
Lateral Surface ◽  
Dielectric Resonator ◽  
Ground Plane ◽  
Longitudinal Axis ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Axis Parallel ◽  
Coaxial Probe

AbstractIn this paper, a Coaxial probe-fed Laterally placed Cylindrical Dielectric Resonator Antenna (LCDRA) with symmetrical triangular notches is presented. The lateral surface of the Cylindrical Dielectric Resonator Antenna (CDRA) is kept on the ground plane with its longitudinal axis parallel to the ground plane. LCDRA has a lower resonant frequency than the CDRA and it offers considerably wider impedance bandwidth than CDRA. Finally, two symmetrical triangular notches are introduced on the two edges of LCDRA which is perpendicular to the axis to further improve the impedance bandwidth. The proposed antenna offers a wide impedance bandwidth (

scholarly journals Dual Band Notch, Compact, Low profile, Hybrid Ultra Wideband RDRA

2020 ◽  
Vol 10 (1) ◽  
pp. 166-169
Keyword(s):  
Radiation Pattern ◽  
Dielectric Resonator ◽  
Surface Current ◽  
Wide Band ◽  
Ultra Wideband ◽  
Dual Band ◽  
Ultra Wide Band ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Ground Structure

This paper presents a novel, compact Ultra Wide Band , Asymmetric Ring Rectangular Dielectric Resonator Antenna (ARRDRA), which is a unique combination of Thin Dielectric Resonator (DR), Fork shape patch and defective ground structure. The base of the proposed antenna is its Hybrid structure, which generates fundamental TM, TE and higher order modes that yields an impedance bandwidth of 119%. Proposed antenna provides a frequency range from 4.2 to 16.6 GHz with a stable radiation pattern and low cross polarization levels. Peak gain of 5.5 dB and average efficiency of 90% is obtained by the design. Antenna is elongated on a FR4 substrate of dimension 20 x 24x 2.168 mm3 and is particularly suitable for C band INSAT, Radio Altimeter, WLAN, Wi-Fi for high frequencies. Ease in fabrication due to simplicity, compactness, stable radiation pattern throughout the entire bandwidth are the key features of the presented design. Inclusion of Defective ground structure and asymmetric ring not only increases the bandwidth but also stabilize the gain and efficiency due to less surface current. Presented design launch an Ultra Wide Band antenna with sufficient band rejection at 4.48-5.34 and 5.64-8.33 GHz with stable radiation pattern and high gain.

scholarly journals DESIGN AND SIMULATION OF DIELECTRIC RESONATOR ANTENNA (DRA) WITH CO-AXIAL PROBE FOR WIRELESS APPLICATION

2020 ◽  
Vol 5 (2) ◽  
pp. 75-83
Author(s):  
Devansh Sinha ◽  
Mohit Vyas ◽  
Sanjay Singh Kushwah
Keyword(s):  
High Frequency ◽  
Dielectric Resonator ◽  
Return Loss ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Frequency Bandwidth ◽  
Rectangular Patch ◽  
Wireless Application ◽  
Potential Parameters

In this paper a Dielectric resonator antenna (DRA) consists of a rectangular geometry and a printed rectangular patch on top of it in order to achieve better performance and operation without significant increase in antenna size. DRA structure is proposed at a height of 2 mm from the ground plane and patch incorporated at the height of 3.638 mm. This work is mainly focused on increasing the potential parameters of DRA and analyze high frequency band. The proposed antenna is designed to resonate at 25 GHz and by varying the DRA size ‘a, then the simulated results shows variation in Return Loss. The impedance bandwidth of the DRA (23.417 GHz-26.961 GHz) and return loss is 26.543951dB.The proposed DRA is analyzed and design using CST-MSW (2010). The simulated result shows the Far field, smith chart. We have estimated the wavelength, frequency, bandwidth, Return loss and directivity.                                      

scholarly journals A Broadband Differential-Fed Dual-Polarized Hollow Cylindrical Dielectric Resonator Antenna for 5G Communications

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6448
Author(s):  
Xiaosheng Fang ◽  
Kangping Shi ◽  
Yuxiang Sun
Keyword(s):  
Dielectric Resonator ◽  
Impedance Bandwidth ◽  
Antenna Gain ◽  
Dielectric Resonator Antenna ◽  
Radiation Patterns ◽  
Higher Order Modes ◽  
Dual Polarized ◽  
Broadside Radiation ◽  
K9 Glass ◽  
Better Than

A broadband differential-fed dual-polarized hollow cylindrical dielectric resonator antenna (DRA) is proposed in this article. It makes use of the HEM111, HEM113, and HEM115 modes of the cylindrical hollow DRA. The proposed DRA is simply fed by two pairs of conducting strips and each pair of strips is provided with the out-of-phase signals. After introducing four disconnected air holes into the DRA, a broadband characteristic is achieved, with little effect on the antenna gain of its higher-order modes. To verify this idea, frosted K9-glass is applied to fabricate the hollow cylindrical DRA. The differential S-parameters, radiation patterns, and antenna gain of the DRA are studied. It is found that the proposed differential-fed dual-polarized DRA is able to provide a broad differential impedance bandwidth of ~68% and a high differential-port isolation better than ~46 dB. Moreover, symmetrical broadside radiation patterns are observed across the whole operating band. The proposed DRA covers the frequency bands including the 5G-n77 (3.4–4.2 GHz), 5G-n79 (4.4–5.0 GHz), WLAN-5.2 GHz (5.15–5.35 GHz), and WLAN-5.8 GHz (5.725–5.825 GHz), which can be used for 5G communications.

A Coplanar Waveguide Rectangular Dielectric Resonator Antenna (RDRA) for 4G Applications

2015 ◽  
Vol 73 (1) ◽  
Author(s):  
Muhammad Ramlee Kamarudin ◽  
Siti Fairuz Roslan ◽  
Mohsen Khalily ◽  
Mohd Haizal Jamaluddin
Keyword(s):  
Dielectric Resonator ◽  
Coplanar Waveguide ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Measurement Results ◽  
Metallic Strip ◽  
Measured Impedance ◽  
Rectangular Dielectric Resonator Antenna ◽  
Good Agreement

This paper presents the design of coplanar waveguide (CPW) rectangular dielectric resonator antenna (RDRA) with and without metallic strip, operating at 2.6 GHz for long term evolution (LTE) applications. The CPW RDRA without metallic strip produces impedance bandwidth of 51 %. Then, a metallic strip was added on top of the dielectric resonator (DR) in order to enhance the impedance bandwidth; thus give more flexibility for the system to cover more applications. A good agreement between simulation and measurement results, in terms of reflection coefficient magnitude and radiation pattern is presented. The simulated and measured impedance BWs for S11 < -6dB are 67 % (1.74-3.47 GHz) and 66 % (1.83-3.54 GHZ) respectively, with the gain of 3.12 dBi is obtained at 2.6 GHz.  The mode excited for this antenna is TEy1δ1 mode.

Sign in / Sign up

Export Citation Format

Share Document