Italian-style salami batter (formulated with pork shoulder) was inoculated with ca. 7.0 log CFU/g of either Salmonella or Listeria monocytogenes. Salami links (55-mm cellulose casings) were fermented at 30°C for 24, 40, or 72 h and then dried to target moisture/protein ratios (MPRs) of 1.9:1 or 1.4:1. Links were sampled after fermentation (24, 40, and 72 h) and after combined fermentation-drying treatments (MPRs of 1.9:1 and 1.4:1 for all fermentation periods), and microbiological and proximate analyses were performed at each sampling. Pathogen populations were enumerated by direct plating on selective agar and by an injured-cell recovery method. When enumerated by the injured-cell recovery method, Salmonella populations were reduced by 1.2 to 2.1 log CFU/g after fermentation alone (24 to 72 h) and by 2.4 to 3.4 log CFU/g when fermentation was followed by drying. Drying to an MPR of 1.4:1 was no more effective than drying to an MPR of 1.9:1 (P > 0.05). When enumerated directly on selective media, Salmonella populations were reduced from 1.6 to 2.4 log CFU/g and from 3.6 to 4.5 log CFU/g for fermentation alone and fermentation followed by drying, respectively. L. monocytogenes populations were reduced by <1.0 log CFU/g following all fermentation and combined fermentation-drying treatments, regardless of the enumeration method. These results suggest that the Italian-style salami manufacturing process evaluated does not adequately reduce high pathogen loads. Processors may thus need to consider supplemental measures, such as raw material specifications and a final heating step, to enhance the lethality of the overall manufacturing process.
Paper Analyses of Tocharian manuscripts of the Pelliot Collection stored in the National Library of France (Bibliothèque nationale de France)