scholarly journals Paper Analyses of Tocharian manuscripts of the Pelliot Collection stored in the National Library of France (Bibliothèque nationale de France)

2020 ◽  
Vol 14 (3) ◽  
pp. 387-410
Author(s):  
Emilie Arnaud-Nguyen
Keyword(s):  
Central Asia ◽  
Manufacturing Process ◽  
Storage Conditions ◽  
Paper Analysis ◽  
Raw Material ◽  
National Library ◽  
Local Adaptations ◽  
Preliminary Results ◽  
Paper Manufacturing ◽  
The Many

This paper describes the preliminary results of my PhD research within the ERC pro­ject “HisTochText”. The aim is to perform macroscopic analyses of archaeological papers from the Pelliot Collection. They are stored in the National Library of France (Bibliothèque nationale de France). Most were discovered in the oasis kingdom of Kucha, inscribed in an ancient Indian writing, brāhmῑ. The language was unknown in France. Kucha was a meeting place for many influences both western and eastern, insofar as paper analysis seeks to determine technological influences and local adaptations. Macroscopic analyses rely on traces found in the material of the paper which may be the result of the many stages in the life of the document: the raw material, the manufacturing process, the conditions of use and the storage conditions, both ancient and modern. To this day 350 fragments have been observed. Little is known about papermaking in Central Asia. As a consequence, every shred of information must be examined in order to deter­mine the differences from and similarities to paper manufacturing in Xinjiang.

scholarly journals The Influence of Temperature, Storage Conditions, pH, and Ionic Strength on the Antioxidant Activity and Color Parameters of Rowan Berry Extracts

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3786
Author(s):  
Elena Cristea ◽  
Aliona Ghendov-Mosanu ◽  
Antoanela Patras ◽  
Carmen Socaciu ◽  
Adela Pintea ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Ionic Strength ◽  
Organic Acids ◽  
Bioactive Compounds ◽  
Acid Methyl Ester ◽  
Storage Conditions ◽  
Raw Material ◽  
Thermal Treatments ◽  
Spectrophotometric Methods ◽  
Berry Extracts

Recent trends in the food industry combined with novel methods in agriculture could transform rowan into a valuable raw material with potential technological applications. Thus, the aim of this research was to investigate the content of bioactive compounds in its fruits and to assess the color and antioxidant stability of the extracts prepared from such fruits during various thermal treatments and at different pH and ionic strength values. Various spectrophotometric methods, HPLC, and capillary electrophoresis were used to quantify the concentrations of bioactive compounds—polyphenols, carotenoids, organic acids, and to assess antioxidant activity and color. The results show that rowan berries contain circa 1.34–1.47 g/100 g of polyphenols among which include catechin, epicatechin, ferulic acid methyl ester, procyanidin B1, etc.; ca 21.65 mg/100 g of carotenoids including zeaxanthin, β-cryptoxanthin, all-trans-β-carotene, and various organic acids such as malic, citric, and succinic, which result in a high antioxidant activity of 5.8 mmol TE/100 g. Results also showed that antioxidant activity exhibited high stability when the extract was subjected to various thermal treatments, pHs, and ionic strengths, while color was mainly impacted negatively when a temperature of 100 °C was employed. This data confirms the technological potential of this traditional, yet often overlooked species.

scholarly journals Influence of drying methods on preservation of biologically active substances of garden strawberries being raw material for food enrichment

2021 ◽  
Vol 845 (1) ◽  
pp. 012094
Author(s):  
I M Novikova ◽  
O M Blinnikova ◽  
L G Eliseeva ◽  
D A Blinnikova
Keyword(s):  
Shelf Life ◽  
Storage Period ◽  
Storage Conditions ◽  
Biologically Active Substances ◽  
Biologically Active ◽  
Raw Material ◽  
Drying Methods ◽  
Urgent Problem ◽  
And Storage ◽  
Active Substances

Abstract At present, the preservation of the consumer properties of berry products is an urgent problem. Use of fresh garden strawberries is limited by a short storage period and seasonality. Under optimal storage conditions in a normal atmosphere, the average shelf life of strawberries is from 2 to 9 days depending on the variety. To meet the needs of the population in garden strawberries and meet the physiological needs in a unique complex of biologically active substances, strawberries are subjected to different processing methods. Drying being a type of fruit and berry products processing has the following advantages: a significant increase in the shelf life of products, a decrease in the mass and storage volumes of dried berries, preservation of minerals, carbohydrates, dietary fiber, antioxidants, bioflavonoids and many biologically active compounds in berries. Modern drying technologies allow preserving the content of essential vitamins to its full extent. Comparison of two technologies for drying garden strawberries has established that vitamins and other biologically active substances are well preserved in berries. Berries dried by convective vacuum-impulse method (CVI) are recommended to be used for food enrichment.

scholarly journals RANCANG BANGUN SISTEM INFORMASI PERSEDIAAN BAHAN BAKU DAN ADMINISTRASI GUDANG MAJEMUK (STUDI KASUS KAROSERI PT. XYZ MALANG)

2017 ◽  
Vol 2 (2) ◽  
pp. 146-152
Author(s):  
Denny Lukianto Kumala ◽  
Soetam Rizky Wicaksono
Keyword(s):  
Manufacturing Process ◽  
Raw Materials ◽  
Influential Factor ◽  
Raw Material ◽  
Accounting System ◽  
Accurate Calculation ◽  
Counting System ◽  
Administration System ◽  
The Difference ◽  
Production Losses

In the manufacturing process Bus and Mini Bus, a lot of the raw materials required. Raw materials are stored at many warehouses (especially on Body PT. XYZ Malang). Materials / goods are highly vulnerable to lost or stolen. The most influential factor in it is the counting system inventory / materials and administration. These changes will have an impact on the process of goods more accurate calculation based on the demand of production. Losses will have a greater likelihood of being used if the system can not address the calculation of the goods/raw materials better.And administration system that can cope with the calculation of the goods/raw materials are better here is a system that can calculate expenditures for production based on the incoming bill alone, and can calculate the receipt of goods in accordance with the letter received by the supplier. The system can also provide reports based on existing transactions during a certain period.With the inventory system and the administration is then the difference between the goods that previously occurred can be minimized and raw material inventory accounting system can work better.

scholarly journals Useful Bioactive Substances from Wastes: Recovery of Trans-Resveratrol from Grapevine Stems

2016 ◽  
Vol 10 (1) ◽  
pp. 4-9 ◽  
Author(s):  
George Angelov ◽  
Lubomir Boyadzhiev ◽  
Silviya Georgieva
Keyword(s):  
Water Solubility ◽  
Pharmaceutical Preparations ◽  
Water Soluble ◽  
Raw Material ◽  
Bioactive Substances ◽  
Total Extract ◽  
Initial Extract ◽  
Efficient Extraction ◽  
Simple Extraction ◽  
The Many

The methods for producing natural resveratrol are of big interest because of the many health benefits of this substance and its increasing use in functional foods, food supplements and para-pharmaceutical preparations. Generally, resveratrol is extracted from different natural sources, most of them usually produced for consumption purposes (grapes, nuts). This paper presents a method for recovery of resveratrol from a widely available raw material - grapevine stems, a by-product of vine pruning. An efficient extraction-fractionation scheme is developed, based on shifting the phase equilibrium, by which more concentrated extracts of resveratrol are obtained. After a simple extraction, the initial extract is further separated into two fractions, containing either water or ethanol-soluble compounds. Using this approach, the resveratrol’s low water solubility helps isolate it from other water-soluble substances. The resulting product is almost ten times more concentrated in trans-resveratrol than the initial total extract. Additionally, a fraction containing water-soluble polyphenols is obtained, which could be used for water-based pharmaceutical and cosmetic preparations.

scholarly journals LOADS ON WIND TURBINES ACCESS PLATFORMS WITH GRATINGS

2011 ◽  
Vol 1 (32) ◽  
pp. 65
Author(s):  
Thomas Lykke Andersen ◽  
Peter Frigaard ◽  
Michael R Rasmussen ◽  
Luca Martinelli
Keyword(s):  
Drag Coefficient ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Large Scale ◽  
Peak Load ◽  
Multiplication Factor ◽  
Preliminary Results ◽  
Different Types ◽  
The Many ◽  
Large Scale Tests

The present paper deals with loads on wind turbine access platforms. The many planned new wind turbine parks together with the observed damages on platforms in several existing parks make the topic very important. The paper gives an overview of recently developed design formulae for different types of entrance platforms. Moreover, the paper present new results on loads on grates based on both drag coefficient measurements and preliminary results on slamming from large scale tests. As expected both investigations show that platforms with grates give a significant reduction in the loads compared to closed plate platforms. The grate multiplication factor, defined as the peak load on the grate platform relative to the peak load on a closed plate platform was found approximately equal to the solidity of the grate.

scholarly journals EVALUASI BESAR BUTIR TERHADAP SIFAT MEKANIS CuZn70/30 SETELAH MENGALAMI DEFORMASI MELALUI CANAI DINGIN

POROS ◽  
2017 ◽  
Vol 12 (1) ◽  
pp. 58
Author(s):  
Riyan Sanjaya ◽  
Eddy S Siradj
Keyword(s):  
Mechanical Properties ◽  
Cold Rolling ◽  
Tensile Test ◽  
Tensile Testing ◽  
Rolling Process ◽  
Raw Material ◽  
Hardness Testing ◽  
Plastic Properties ◽  
Fine Microstructure ◽  
The Many

Abstract: The research was conducted because of the many industries that use CuZn 70/30 as a raw material in industrialization. CuZn 70/30 was studied to obtain the strong mechanical properties of brass. Research CuZn 70/30 was evaluated using a process of heating of about 6150 ± 50C and then held for 90 minutes. The next process is the process of cold rolling by using a variety of reduction and then tested by using a Vickers hardness testing, tensile testing, observation of the microstructure. The result of this research is a fine microstructure (below 10 μm), hardness (HV 211.67). Tensile test also conducted to get how much resistance CuZn 70/30 to resist the pull. The cold rolling process causing the decrease the mechanical properties and also increase the plastic properties of the brass. 

scholarly journals Valorization of Tomato Surplus and Waste Fractions: A Case Study Using Norway, Belgium, Poland, and Turkey as Examples

Foods ◽  
2019 ◽  
Vol 8 (7) ◽  
pp. 229 ◽  
Author(s):  
Løvdal ◽  
Droogenbroeck ◽  
Eroglu ◽  
Kaniszewski ◽  
Agati ◽  
...  
Keyword(s):  
Animal Feed ◽  
Economic Loss ◽  
Storage Conditions ◽  
Raw Material ◽  
Tomato Production ◽  
Sustainable Food ◽  
Processing Technologies ◽  
Tomato Processing ◽  
Health Promoting ◽  
Negative Environmental Impact

There is a large potential in Europe for valorization in the vegetable food supply chain. For example, there is occasionally overproduction of tomatoes for fresh consumption, and a fraction of the production is unsuited for fresh consumption sale (unacceptable color, shape, maturity, lesions, etc.). In countries where the facilities and infrastructure for tomato processing is lacking, these tomatoes are normally destroyed, used as landfilling or animal feed, and represent an economic loss for producers and negative environmental impact. Likewise, there is also a potential in the tomato processing industry to valorize side streams and reduce waste. The present paper provides an overview of tomato production in Europe and the strategies employed for processing and valorization of tomato side streams and waste fractions. Special emphasis is put on the four tomato-producing countries Norway, Belgium, Poland, and Turkey. These countries are very different regards for example their climatic preconditions for tomato production and volumes produced, and represent the extremes among European tomato producing countries. Postharvest treatments and applications for optimized harvest time and improved storage for premium raw material quality are discussed, as well as novel, sustainable processing technologies for minimum waste and side stream valorization. Preservation and enrichment of lycopene, the primary health promoting agent and sales argument, is reviewed in detail. The European volume of tomato postharvest wastage is estimated at >3 million metric tons per year. Together, the optimization of harvesting time and preprocessing storage conditions and sustainable food processing technologies, coupled with stabilization and valorization of processing by-products and side streams, can significantly contribute to the valorization of this underutilized biomass.

Retour à la Bibliothèque Nationale de France

1997 ◽  
Vol 9 (1) ◽  
pp. 45-58 ◽  
Author(s):  
Philippe Bélaval
Keyword(s):  
Open Access ◽  
General Public ◽  
Storage Conditions ◽  
Bibliographic Databases ◽  
Reference Library ◽  
National Library ◽  
Special Collections ◽  
System A ◽  
Starting Point ◽  
Reservation System

The decision in July 1988 to build a new library in Paris has been the starting point of a deep change in every field of activity for the French national library, which combines the old Bibliothèque nationale in the Rue de Richelieu with the Bibliothèque de France in Tolbiac in what is now known as the Bibliothèque nationale de France (BnF). The collections will be divided between two sites: the Rue de Richelieu building will retain the special collections, in improved storage conditions and with better access; while the printed and audiovisual collections are being transferred to the new building at Tolbiac between the end of 1996 and the end of 1998. 370,000 books will be acquired specially to fill gaps in previously neglected areas such as law, economics and science. A new OPAC, due for completion in 1998, will provide access to merged files of the BnF, including 4.5 million converted records from the old hand-written catalogue. Next to the research reading rooms, which are for registered users only, will be ten reading rooms open to the general public for a fee, which will have 380,000 books on open access. The OPAC will be accessible remotely, as will the seat and book reservation system. A new preservation centre has been built in Marne-la-Vallée, 20 km east of Paris; there is a special emphasis on deacidification. There are two digitization programmes, for 100,000 texts and 300,000 pictures; negotiation is taking place with copyright holders. Experimental access to several bibliographic databases and digitized collections is already proving successful. The new reference library in the new building opened in December 1996 and the research library will open in 1998.

scholarly journals Obsidian from the Bronze Age Village of San Vincenzo, Stromboli, Aeolian Islands: A Preliminary Investigation

2019 ◽  
Vol 5 (1) ◽  
pp. 31-45 ◽  
Author(s):  
Sara Tiziana Levi ◽  
Diego Calliari ◽  
Marta Arzarello ◽  
Valentina Cannavò ◽  
Andrea Di Renzoni ◽  
...  
Keyword(s):  
Bronze Age ◽  
Preliminary Investigation ◽  
Raw Material ◽  
Aeolian Islands ◽  
Preliminary Results ◽  
Production Areas ◽  
Non Destructive ◽  
The Bronze Age

AbstractWe present the preliminary results of the ongoing investigation of the obsidian from the Bronze Age village of San Vincenzo, Stromboli, Aeolian Islands, for the purpose of providing technological and typological characterization, and also provenance of the raw material, the latter with non-destructive p-XRF. Regarding provenance, the source of the raw material is likely to be neighbouring Lipari. It was transported to Stromboli and used mostly in a highly opportunistic manner and for the production of blade(let), non-bladelike tools (mainly scrapers) and micro bladelets. The obsidian distribution around the site shows concentration in both domestic and production areas.

Sign in / Sign up

Export Citation Format

Share Document