Literature Sources of Mammalian Toxicity Data, with Special Emphasis on Tabulating Machinery Applications

Author(s):  
W. J. WISWESSER
1982 ◽  
Vol 14 (12) ◽  
pp. 5-14 ◽  
Author(s):  
D Mackay

The origins of “micropollutants” are discussed and classified. It is suggested that assessing the risk and ensuring an acceptably low level of adverse effects from these substances requires information or control of three factors (exposure, toxicity and characteristics of the victim or organism) which combine to generate the toxic event. Methods of estimating exposure are discussed, especially environmental models. Ultimately, it should be possible to couple these models to toxicity data in a rational, rigorous manner to elucidate the extent of risk and control it to acceptable levels.


1985 ◽  
Vol 17 (6-7) ◽  
pp. 1187-1198 ◽  
Author(s):  
G. Mance ◽  
A. R. O'Donnell

This paper discusses the derivation of environmental quality standards for coastal waters and the difficulties of using such standards for controlling industrial discharges. Attention is focused on the common List II substances, copper, chromium, lead, nickel, zinc and arsenic - and their effects on marine life. The adequacy of existing toxicity data is discussed and it is concluded that long exposure tests are required to provide information on sublethal effects. Such data are currently limited. It is also important that consideration be given to the effects that reducing salinities and increasing temperatures have in increasing the toxicity of these substances. The complexity of interpreting the results of laboratory toxicity data to coastal waters is discussed with reference to a study of the impact of an industrial discharge.


1992 ◽  
Vol 26 (9-11) ◽  
pp. 2345-2348 ◽  
Author(s):  
C. N. Haas

A new method for the quantitative analysis of multiple toxicity data is described and illustrated using a data set on metal exposure to copepods. Positive interactions are observed for Ni-Pb and Pb-Cr, with weak negative interactions observed for Ni-Cr.


2000 ◽  
Vol 42 (3-4) ◽  
pp. 115-123 ◽  
Author(s):  
R. Shoji ◽  
A. Sakoda ◽  
Y. Sakai ◽  
M. Suzuki

The quality of environmental waters such as rivers is often deteriorated by various kinds of trace and unidentified chemicals despite the recent development of sewage systems and wastewater treatment technologies. In addition to contamination by particular toxicants, complex toxicity due to multi-component chemicals could be much more serious. The environmental situation in bodies of water in Japan led us to apply bioassays for monitoring the water quality of environmental waters in order to express the direct and potential toxicity to human beings and ecosystems rather than determinating concentrations of particular chemicals. However, problems arose from the fact that bioassays for pharmaceutical purposes generally required complicated, time-consuming, expert procedures. Also, a methodology for feedback of the resultant toxicity data to water environment management has not been established yet. To this end, we developed a novel bioassay based on the low-density lipoprotein (LDL) uptake activity of human hepatoblastoma cells. The assay enabled us to directly detect the toxicity of environmental waters within 4 hours of exposure. This is a significantly quick and easy procedure as compared to that of conventional bioassays. The toxicity data for 255 selected chemicals and environmental waters obtained by this method were organized by a mathematical equation in order to make those data much more effectively and practically useful to the management of environmental waters. Our methodology represents a promising example of applying bioassays to monitor environmental water quality and generating potential solutions to the toxicity problems encountered.


Toxics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 79
Author(s):  
Inge Werner ◽  
Anke Schneeweiss ◽  
Helmut Segner ◽  
Marion Junghans

This study assessed the acute and chronic risk of pesticides, singly and as mixtures, for fish using comprehensive chemical data of four monitoring studies conducted in small- and medium-sized streams of Switzerland between 2012 and 2018. Pesticides were ranked based on single substance risk quotients and relative contribution to mixture risk. Concentrations of the pyrethroid insecticides, λ-cyhalothrin, cypermethrin and deltamethrin, and the fungicides, carbendazim and fenpropimorph, posed acute or chronic single substance risks. Risk quotients of eighteen additional pesticides were equal or greater than 0.1, and thirteen of those contributed ≥30% to mixture risk. Relatively few substances dominated the mixture risk in most water samples, with chronic and acute maximum cumulative ratios never exceeding 5 and 7, respectively. A literature review of toxicity data showed that concentrations of several pesticides detected in Swiss streams were sufficient to cause direct sublethal effects on fish in laboratory studies. Based on the results of our study, we conclude that pesticides detected in Swiss streams, especially pyrethroid insecticides, fungicides and pesticide mixtures, pose a risk to fish health and can cause direct sublethal effects at environmental concentrations. Sensitive life stages of species with highly specialized life history traits may be particularly vulnerable; however, the lack of toxicity data for non-model species currently prevents a conclusive assessment across species.


2010 ◽  
Vol 11 (1) ◽  
pp. 21 ◽  
Author(s):  
Thomas P. Kuhar ◽  
James F. Walgenbach ◽  
Hélène B. Doughty

Chlorantraniliprole (=Rynaxypyr) is a novel anthranilic diamide insecticide that is of interest to vegetable growers because of its low mammalian toxicity and systemic properties. Field trials were conducted between 2006 and 2008 in North Carolina and Virginia to test the efficacy of chlorantraniliprole as a drip chemigation treatment on tomatoes. Drip chemigation of chlorantraniliprole at various rates and intervals significantly reduced the percentage of tomatoes damaged by tomato fruitworm (Helicoverpa zea) comparable to that typically achieved from multiple foliar applications of insecticides. The best control was achieved with two applications of chlorantraniliprole at 0.074 kg ai/ha, or a single application at 0.099 kg ai/ha. Residual ingestion bioassays showed that chlorantraniliprole was effectively taken up by the roots and was active in leaves up to 66 days after treatment (DAT), active in blossoms up to 22 DAT, but was not active in fruit. Drip chemigation of chlorantraniliprole may offer several advantages over foliar applications, including ease of application, reduced pesticide input into the environment, reduced worker exposure to pesticides, and reduced risk to beneficial arthropods. Accepted for publication 14 January 2010. Published 7 April 2010.


Sign in / Sign up

Export Citation Format

Share Document