scholarly journals Dynamic restructuring of supported metal nanoparticles and its implications for structure insensitive catalysis

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Charlotte Vogt ◽  
Florian Meirer ◽  
Matteo Monai ◽  
Esther Groeneveld ◽  
Davide Ferri ◽  
...  

AbstractSome fundamental concepts of catalysis are not fully explained but are of paramount importance for the development of improved catalysts. An example is the concept of structure insensitive reactions, where surface-normalized activity does not change with catalyst metal particle size. Here we explore this concept and its relation to surface reconstruction on a set of silica-supported Ni metal nanoparticles (mean particle sizes 1–6 nm) by spectroscopically discerning a structure sensitive (CO2 hydrogenation) from a structure insensitive (ethene hydrogenation) reaction. Using state-of-the-art techniques, inter alia in-situ STEM, and quick-X-ray absorption spectroscopy with sub-second time resolution, we have observed particle-size-dependent effects like restructuring which increases with increasing particle size, and faster restructuring for larger particle sizes during ethene hydrogenation while for CO2 no such restructuring effects were observed. Furthermore, a degree of restructuring is irreversible, and we also show that the rate of carbon diffusion on, and into nanoparticles increases with particle size. We finally show that these particle size-dependent effects induced by ethene hydrogenation, can make a structure sensitive reaction (CO2 hydrogenation), structure insensitive. We thus postulate that structure insensitive reactions are actually apparently structure insensitive, which changes our fundamental understanding of the empirical observation of structure insensitivity.

Author(s):  
Xin-Ming Zhang ◽  
Yan-Qing Wu ◽  
Feng-Lei Huang

AbstractA multiscale model is used to analyze the compaction processes in granular HMX beds composed of different particle sizes (coarse particles,


2012 ◽  
Vol 11 (01) ◽  
pp. 1250010
Author(s):  
ARCHANA BHATT ◽  
MUNISH KUMAR

Simple theoretical method is developed to study the size dependence of equation of state of nanomaterials. The isothermal compression of Ni and ε- Fe has been computed for different particle sizes. A shift in compression curve is obtained by increasing the particle size. This demonstrates the softening of the material by increasing the particle size. For larger particle size (~100 nm) the compression curve resembles with that of the bulk. This demonstrates that the nanomaterial becomes bulk for larger particle size. The results have been compared with the available experimental data. A good agreement between theory and experiment demonstrates the validity of the method proposed in the present paper.


NANO ◽  
2015 ◽  
Vol 10 (07) ◽  
pp. 1550104 ◽  
Author(s):  
Shuting Wang ◽  
Zixiang Cui ◽  
Yongqiang Xue

Studying the thermodynamic properties of the reaction of nanoparticle with organic substance is significant for the application of nanomaterial in organic fields. In this work, by using the reaction of nano- ZnO with different particle sizes with benzoic acid as a research system, the size-dependent standard equilibrium constant and reaction thermodynamic properties were analyzed theoretically, and the influence regularities of the particle size on the standard equilibrium constant and the reaction thermodynamic properties were studied. The excellent agreement between the experimental results and theoretical analysis shows that the particle size has remarkable influence on the standard equilibrium constant and the thermodynamic properties of the reaction; with the decrease of the particle size, the standard equilibrium constant increases, while the standard molar reaction Gibbs energy, the standard molar reaction enthalpy and the standard molar reaction entropy decrease. Furthermore, the logarithm of the standard equilibrium constant and the thermodynamic properties present linear relations with the reciprocal of the particle diameter, respectively. The theory and the influence regularities will provide useful tools to lead better and broader application of nanomaterial in organic fields.


Author(s):  
Xin-Ming Zhang ◽  
Yan-Qing Wu ◽  
Feng-Lei Huang

AbstractA multiscale model is used to analyze the compaction processes in granular HMX beds composed of different particle sizes (coarse particles,


2012 ◽  
Vol 486 ◽  
pp. 129-133
Author(s):  
R. Mane Dhanraj ◽  
H. Kadam Ram ◽  
T. Alone Suresh ◽  
E. Shirsath Sagar

Nanoparticles of CoCrFeO4ferrite in the particle size range of 9 - 38 nm have been prepared by a sol-gel auto combustion method. Synthesized powders were annealed at four different temperatures viz. 400 °C, 600 °C, 800 °C and 1000 °C. Particle sizes are determined by X-ray analysis and TEM. The size of the nanoparticles increase linearly with sintering temperature and time, most probably due to coalescence that increases as sintering temperature increases. The saturation magnetization increases from 62 to 81 emu/g and coercivity initially increases up to 814 Oe and then decreases to 366 Oe with increase in particle size and sintering temperature. The typical blocking temperature increases from 135 to 165 K with increasing particle size.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Khaled Al-Hadyan ◽  
Ghazi Alsbeih ◽  
Najla Al-Harbi ◽  
Sara Bin Judia ◽  
Maha Al-Ghamdi ◽  
...  

AbstractTo cope with the shortage of filtering facepiece respirators (FFRs) during the coronavirus (COVID-19) pandemic, healthcare institutions were forced to reuse FFRs after applying different decontamination methods including gamma-irradiation (GIR). The aim of this study was to evaluate the effect of GIR on the filtration efficiency (FE) of FFRs and on SARS-CoV-2 detection. The FE of 2 FFRs types (KN95 and N95-3 M masks) was assessed at different particle sizes (0.3–5 µm) following GIR (0–15 kGy) delivered at either typical (1.65 kGy/h) or low (0.5088 kGy/h) dose rates. The detection of two SARS-CoV-2 RNA genes (E and RdRp4) following GIR (0–50 kGy) was carried out using RT-qPCR assay. Both masks showed an overall significant (P < 0.001) reduction in FE with increased GIR doses. No significant differences were observed between GIR dose rates on FE. The GIR exhibited significant increases (P ≤ 0.001) in the cycle threshold values (ΔCt) of both genes, with no detection following high doses. In conclusion, complete degradation of SARS-CoV-2 RNA can be achieved by high GIR (≥ 30 kGy), suggesting its potential use in FFRs decontamination. However, GIR exhibited adverse effects on FE in dose- and particle size-dependent manners, rendering its use to decontaminate FFRs debatable.


TAPPI Journal ◽  
2015 ◽  
Vol 14 (9) ◽  
pp. 565-576 ◽  
Author(s):  
YUCHENG PENG ◽  
DOUGLAS J. GARDNER

Understanding the surface properties of cellulose materials is important for proper commercial applications. The effect of particle size, particle morphology, and hydroxyl number on the surface energy of three microcrystalline cellulose (MCC) preparations and one nanofibrillated cellulose (NFC) preparation were investigated using inverse gas chromatography at column temperatures ranging from 30ºC to 60ºC. The mean particle sizes for the three MCC samples and the NFC sample were 120.1, 62.3, 13.9, and 9.3 μm. The corresponding dispersion components of surface energy at 30°C were 55.7 ± 0.1, 59.7 ± 1.3, 71.7 ± 1.0, and 57.4 ± 0.3 mJ/m2. MCC samples are agglomerates of small individual cellulose particles. The different particle sizes and morphologies of the three MCC samples resulted in various hydroxyl numbers, which in turn affected their dispersion component of surface energy. Cellulose samples exhibiting a higher hydroxyl number have a higher dispersion component of surface energy. The dispersion component of surface energy of all the cellulose samples decreased linearly with increasing temperature. MCC samples with larger agglomerates had a lower temperature coefficient of dispersion component of surface energy.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
E. S. Prasedya ◽  
A. Frediansyah ◽  
N. W. R. Martyasari ◽  
B. K. Ilhami ◽  
A. S. Abidin ◽  
...  

AbstractSample particle size is an important parameter in the solid–liquid extraction system of natural products for obtaining their bioactive compounds. This study evaluates the effect of sample particle size on the phytochemical composition and antioxidant activity of brown macroalgae Sargassum cristaefolium. The crude ethanol extract was extracted from dried powders of S.cristeafolium with various particle sizes (> 4000 µm, > 250 µm, > 125 µm, > 45 µm, and < 45 µm). The ethanolic extracts of S.cristaefolium were analysed for Total Phenolic Content (TPC), Total Flavonoid Content (TFC), phenolic compound concentration and antioxidant activities. The extract yield and phytochemical composition were more abundant in smaller particle sizes. Furthermore, the TPC (14.19 ± 2.08 mg GAE/g extract to 43.27 ± 2.56 mg GAE/g extract) and TFC (9.6 ± 1.8 mg QE/g extract to 70.27 ± 3.59 mg QE/g extract) values also significantly increased as particle sizes decreased. In addition, phenolic compounds epicatechin (EC), epicatechin gallate (ECG), epigallocatechin (EGC), and Epigallocatechin gallate (EGCG) concentration were frequently increased in samples of smaller particle sizes based on two-way ANOVA and Tukey’s multiple comparison analysis. These results correlate with the significantly stronger antioxidant activity in samples with smaller particle sizes. The smallest particle size (< 45 µm) demonstrated the strongest antioxidant activity based on DPPH, ABTS, hydroxyl assay and FRAP. In addition, ramp function graph evaluates the desired particle size for maximum phytochemical composition and antioxidant activity is 44 µm. In conclusion, current results show the importance of particle size reduction of macroalgae samples to increase the effectivity of its biological activity.


Sign in / Sign up

Export Citation Format

Share Document