scholarly journals A twilight for the complete nitrogen removal via synergistic partial-denitrification, anammox, and DNRA process

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Hafiz Adeel Ahmad ◽  
Beibei Guo ◽  
Xuming Zhuang ◽  
Yiyi Zhao ◽  
Shakeel Ahmad ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Gene Copy Number ◽  
Nitrogen Loading ◽  
Zerovalent Iron ◽  
Gene Copy ◽  
High Throughput Analysis ◽  
Start Up ◽  
Nano Zerovalent Iron

AbstractThe prolonged start-up time and low total nitrogen removal of anammox hinder its full-scale application. Herein, application of nano-zerovalent iron and low strength magnetic field in sole and in combination to abbreviate the start-up period and long-term process stability of anammox was carried out. The reactor’s anammox start-up with the only magnetic field (R3) was 34 days, saving 43.3% time compared with the control. The increase of nitrogen removal efficiency over the control was 43.7% during the start-up period. However, the reactor with the coupled treatment of nano-zerovalent iron and magnetic field (R4) was more stable with higher nitrogen removal efficiency (80%) at high nitrogen loading (5.28 kg/m3/d). Anammox gene copy number in R4 was highest after 180 days of culture, followed by nano-zerovalent iron (R2) and R3 reactor. The functional genes of denitrifying bacteria (nirK and nirS) were also identified in all reactors with higher copy numbers in R2, followed by R4 and R3. Furthermore, high throughput analysis showed that the Thauera performing partial denitrification, Ignavibacterium performing dissimilatory nitrate reduction to ammonium or nitrite were also present in all reactors, more abundant in R4, confirming that the higher nitrogen removal efficiency in R4 was attributed to the synergistic relationship of other nitrogenous genera with anammox. The higher abundance of PD and DNRA in the reactor with the coupled treatment of nano-zero valent iron and magnetic field, achieved in this research, opens the opportunity of complete nitrogen removal via synergistic partial-denitrification, anammox, and DNRA (SPDAD) process.

scholarly journals Start-up Strategies for Anaerobic Ammonia Oxidation (Anammox) in In-Situ Nitrogen Removal from Polluted Groundwater in Rare Earth Mining Areas

2021 ◽  
Vol 13 (8) ◽  
pp. 4591
Author(s):  
Shuanglei Huang ◽  
Daishe Wu
Keyword(s):  
Rare Earth ◽  
Low Temperature ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Ex Situ ◽  
High Concentration ◽  
Low Concentration ◽  
Start Up ◽  
Anammox Activity

The tremendous input of ammonium and rare earth element (REE) ions released by the enormous consumption of (NH4)2SO4 in in situ leaching for ion-adsorption RE mining caused serious ground and surface water contamination. Anaerobic ammonium oxidation (anammox) was a sustainable in situ technology that can reduce this nitrogen pollution. In this research, in situ, semi in situ, and ex situ method of inoculation that included low-concentration (0.02 mg·L−1) and high-concentration (0.10 mg·L−1) lanthanum (La)(III) were adopted to explore effective start-up strategies for starting up anammox reactors seeded with activated sludge and anammox sludge. The reactors were refrigerated for 30 days at 4 °C to investigate the effects of La(III) during a period of low-temperature. The results showed that the in situ and semi in situ enrichment strategies with the addition of La(III) at a low-concentration La(III) addition (0.02 mg·L−1) reduced the length of time required to reactivate the sludge until it reached a state of stable anammox activity and high nitrogen removal efficiency by 60–71 days. The addition of La(III) promoted the formation of sludge floc with a compact structure that enabled it to resist the adverse effects of low temperature and so to maintain a high abundance of AnAOB and microbacterial community diversity of sludge during refrigeration period. The addition of La(III) at a high concentration caused the cellular percentage of AnAOB to decrease from 54.60 ± 6.19% to 17.35 ± 6.69% during the enrichment and reduced nitrogen removal efficiency to an unrecoverable level to post-refrigeration.

scholarly journals Start-Up and Aeration Strategies for a Completely Autotrophic Nitrogen Removal Process in an SBR

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Xiaoling Zhang ◽  
Fan Zhang ◽  
Yanhong Zhao ◽  
Zhengqun Li
Keyword(s):  
Removal Efficiency ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Tap Water ◽  
Granular Sludge ◽  
Anammox Bacteria ◽  
Intermittent Aeration ◽  
Start Up ◽  
Canon Process ◽  
Autotrophic Nitrogen Removal

The start-up and performance of the completely autotrophic nitrogen removal via nitrite (CANON) process were examined in a sequencing batch reactor (SBR) with intermittent aeration. Initially, partial nitrification was established, and then the DO concentration was lowered further, surplus water in the SBR with high nitrite was replaced with tap water, and continuous aeration mode was turned into intermittent aeration mode, while the removal of total nitrogen was still weak. However, the total nitrogen (TN) removal efficiency and nitrogen removal loading reached 83.07% and 0.422 kgN/(m3·d), respectively, 14 days after inoculating 0.15 g of CANON biofilm biomass into the SBR. The aggregates formed in SBR were the mixture of activated sludge and granular sludge; the volume ratio of floc and granular sludge was 7 : 3. DNA analysis showed that Planctomycetes-like anammox bacteria and Nitrosomonas-like aerobic ammonium oxidization bacteria were dominant bacteria in the reactor. The influence of aeration strategies on CANON process was investigated using batch tests. The result showed that the strategy of alternating aeration (1 h) and nonaeration (1 h) was optimum, which can obtain almost the same TN removal efficiency as continuous aeration while reducing the energy consumption, inhibiting the activity of NOB, and enhancing the activity of AAOB.

Experience from start-ups of the first ANITA Mox Plants

2013 ◽  
Vol 67 (12) ◽  
pp. 2677-2684 ◽  
Author(s):  
M. Christensson ◽  
S. Ekström ◽  
A. Andersson Chan ◽  
E. Le Vaillant ◽  
R. Lemaire
Keyword(s):  
Nitrogen Removal ◽  
Removal Rate ◽  
Treatment Plant ◽  
Ammonia Removal ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Process Conditions ◽  
N2o Emissions ◽  
N Removal ◽  
Start Up

ANITA™ Mox is a new one-stage deammonification Moving-Bed Biofilm Reactor (MBBR) developed for partial nitrification to nitrite and autotrophic N-removal from N-rich effluents. This deammonification process offers many advantages such as dramatically reduced oxygen requirements, no chemical oxygen demand requirement, lower sludge production, no pre-treatment or requirement of chemicals and thereby being an energy and cost efficient nitrogen removal process. An innovative seeding strategy, the ‘BioFarm concept’, has been developed in order to decrease the start-up time of new ANITA Mox installations. New ANITA Mox installations are started with typically 3–15% of the added carriers being from the ‘BioFarm’, with already established anammox biofilm, the rest being new carriers. The first ANITA Mox plant, started up in 2010 at Sjölunda wastewater treatment plant (WWTP) in Malmö, Sweden, proved this seeding concept, reaching an ammonium removal rate of 1.2 kgN/m3 d and approximately 90% ammonia removal within 4 months from start-up. This first ANITA Mox plant is also the BioFarm used for forthcoming installations. Typical features of this first installation were low energy consumption, 1.5 kW/NH4-N-removed, low N2O emissions, <1% of the reduced nitrogen and a very stable and robust process towards variations in loads and process conditions. The second ANITA Mox plant, started up at Sundets WWTP in Växjö, Sweden, reached full capacity with more than 90% ammonia removal within 2 months from start-up. By applying a nitrogen loading strategy to the reactor that matches the capacity of the seeding carriers, more than 80% nitrogen removal could be obtained throughout the start-up period.

Start-Up and Cultivation of A2N Denitrifying Phosphorus and Nitrogen Removal System

2012 ◽  
Vol 610-613 ◽  
pp. 1454-1458
Author(s):  
Ming Fen Niu ◽  
Hong Jing Jiao ◽  
Li Xu ◽  
Yan Yu ◽  
Jian Wei
Keyword(s):  
Activated Sludge ◽  
Removal Efficiency ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Nitrogen And Phosphorus ◽  
Start Up ◽  
Two Phases ◽  
Removal System

A2N is two-sludge system, by using the method that first bringing up the cultivation of denitrifying phosphorus removing bacteria (DPB) and nitrification biofilm separately then connecting them, which can start up A2N system successfully. Nitrification biofilm was cultivated in a sequencing batch reactor (SBR). After 30 days, NH4+-N effluent concentration steadily stayed below 0.5mg·L-1.In another SBR, the activated sludge for the enrichment of DPB is from the anaerobic tank, which was firstly operated under anaerobic/aerobic (A/O) condition. After 20 days, PAOs was successfully enriched. Then, the activated sludge was conducted under anaerobic/anoxic/aerobic (A/A/O) condition, maintaining the anaerobic time, gradually increased anoxic time and induced aerobic time. After 30 days DPB was successfully enriched, two phases totally take 50 days. The removal efficiency of total nitrogen and phosphorus are above 85 % and 95 %, so that A2N system was started up successfully.

Assessment of Inocula and N-Removal Performance of Anaerobic Ammonium Oxidation (ANAMMOX) for the Treatment of Aged Landfill Leachates

2012 ◽  
Vol 518-523 ◽  
pp. 2391-2398
Author(s):  
Yan He ◽  
Gong Ming Zhou ◽  
Min Sheng Huang ◽  
Min Tong
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Removal Rate ◽  
Granular Sludge ◽  
Nitrogen Loading ◽  
Anaerobic Granular Sludge ◽  
Landfill Leachates ◽  
N Removal ◽  
Start Up ◽  
Anammox Process

Three kinds of seeding sludge, i.e. conventional activated sludge, anaerobic granular sludge and the nitrifying activated sludge from the nitritation reactor treating aged leachates were evaluated in batch mode to screen the optimized inoculum for the rapid start-up of ANAMMOX reactor. The feasibility of the ANAMMOX process for the treatment of aged leachates was also investigated in a modified upflow anaerobic sludge blanket (UASB, 0.05m3). The batch experiments revealed that the nitrifying activated sludge from the nitritation reactor could respectively achieve the NRR (nitrogen removal rate) of 0.0365 kg N/(m3.d) and the ARR (ammonium removal rate) of 0.013 kg N/(m3.d) on day 12, which were greatly higher than those of the other two tested sludge samples. The mixture of the aforementioned nitrifying activated sludge and anaerobic granular sludge was established as an effective inoculum for the prompt start-up of ANAMMOX reactor. The maximum total nitrogen removal rate of 0.826 kg N/(m3.d) could be obtained for the treatment of “old” leachates under NLR (nitrogen loading rate) of 1.028 kg N/(m3.d). It is concluded that the N-removal performance of ANAMMOX process is still to be improved for actual engineering application to aged landfill leachates.

scholarly journals Aplikasi Proses Anammox Dalam Penyisihan Nitrogen Menggunakan Reaktor Up-Flow Anaerobic Sludge Blanket

2020 ◽  
Vol 21 (1) ◽  
pp. 31-39
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Reri Afrianita ◽  
Ilham Hagi Putra
Keyword(s):  
Nitrogen Removal ◽  
Nitrogen Loading ◽  
Laboratory Scale ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Anammox Bacteria ◽  
Stable Operation ◽  
Start Up ◽  
Anaerobic Sludge Blanket ◽  
Anammox Process

ABSTRACTAnammox process is a more practical alternative in biological nitrogen removal compared to conventional nitrification-denitrification processes. This process conducted at the optimum temperature of 370C. Indonesia, as a tropical country, has the potential for the application of anammox processes to remove nitrogen in wastewater. The purpose of this study was to analyze the efficiency of nitrogen removal in the anammox process using the Up-Flow Anaerobic Sludge Blanket (UASB) reactor at ambient temperature with variations in the hydraulic retention time (HRT) of 24 hours and 12 hours, at the laboratory scale. Samples are measured twice a week using a UV-Vis spectrophotometer. As a seeding sludge for start-up, the reactor was inoculated with granular anammox bacteria genus Candidatus Brocadia. At the stable operation, the ratio of ΔNO2--N:ΔNH4+-N and ΔNO3--N:ΔNH4+-N approach the stoichiometry of the anammox process were 1.20 and 0.21, respectively. The performance of nitrogen removal with 24-hour HRT obtained a maximum nitrogen removal rate (NRR) of 0.113 kg-N/m3.d with nitrogen loading rate (NLR) 0.14 kg-N/m3.d, and at 12-hour HRT, maximum NRR  of 0.196 kg-N/m3.d with NLR 0,28 kg-N/m3.d. Ammonium Conversion Efficiency (ACE) and Nitrogen Removal Efficiency (NRE) maximum for HRT 24 hours were 82% and 77%, respectively while HRT 12 hours were 72% and 68%, respectively. The anammox process operated stably in the tropical temperature with a temperature range of 23-280C on a laboratory scale using the UASB reactor.Keywords: anammox, nitrogen, temperature, tropical, uasb.ABSTRAKProses anammox menjadi alternatif yang lebih efektif dalam penyisihan nitrogen secara biologi dibandingkan dengan proses konvensional nitrifikasi-denitrifikasi. Proses ini berlangsung optimum pada suhu 370C. Indonesia sebagai negara tropis memiliki potensi untuk aplikasi proses anammox untuk menghilangkan nitrogen pada air limbah. Penelitian ini bertujuan untuk menganalisis efesiensi penyisihan nitrogen pada proses anammox menggunakan Up-Flow Anaerobic Sludge Blanket (UASB) reaktor pada suhu ambien dengan variasi Waktu Tinggal Hidrolik (WTH) 24 jam dan 12 jam, pada skala laboratorium. Sampel diukur dua kali setiap minggu menggunakan spektrofotometer UV-Vis. Sebagai seeding sludge (lumpur biakan) untuk start-up (memulai) reaktor digunakan bakteri anammox genus Candidatus Brocadia berbentuk granular. Berdasarkan hasil pengukuran, didapatkan nilai rasio ΔNO2--N:ΔNH4+-N dan ΔNO3--N:ΔNH4+-N mendekati stoikiometri proses anammox yaitu 1,20 dan 0,21. Kinerja penyisihan nitrogen dengan WTH 24 jam didapatkan nilai tingkat penyisihan nitrogen (TPyN ) maksimum 0,113 kg-N/m3.h pada tingkat pemuatan nitrogen (TPN) 0,14 kg-N/m3.h, dan WTH 12 jam nilai TPyN  maksimum 0,196 kg-N/m3.h pada TPN 0,28 kg-N/m3.h. Nilai efisiensi konversi amonia (EKA) dan efisiensi penyisihan nitrogen (EPN) maksimum pada WTH 24 jam berturut-turut adalah 82% dan 77%, sedangkan pada WTH 12 jam berturut-turut adalah 72% dan 68%. Penelitian membuktikan bahwa proses anammox dapat berlangsung stabil pada daerah tropis dengan suhu terukur 21-290C pada skala laboratorium menggunakan UASB reaktor. Kata kunci: Anammox, nitrogen, temperatur, tropis, uasb.

Treatment of high loaded swine slurry in an aerobic granular reactor

2011 ◽  
Vol 63 (9) ◽  
pp. 1808-1814 ◽  
Author(s):  
M. Figueroa ◽  
A. Val del Río ◽  
J. L. Campos ◽  
A. Mosquera-Corral ◽  
R. Méndez
Keyword(s):  
Organic Matter ◽  
Nitrogen Removal ◽  
Batch Reactor ◽  
Granular Sludge ◽  
Average Diameter ◽  
Nitrogen Loading ◽  
Aerobic Granular Sludge ◽  
Swine Slurry ◽  
Start Up ◽  
Removal Efficiencies

Aerobic granular sludge grown in a sequential batch reactor was proposed as an alternative to anaerobic processes for organic matter and nitrogen removal from swine slurry. Aerobic granulation was achieved with this wastewater after few days from start-up. On day 140 of operation, the granular properties were: 5 mm of average diameter, SVI of 32 mL (g VSS)−1 and density around 55 g VSS (Lgranule)−1. Organic matter removal efficiencies up to 87% and nitrogen removal efficiencies up to 70% were achieved during the treatment of organic and nitrogen loading rates (OLR and NLR) of 4.4 kg COD m−3 d−1 and of 0.83 kg N m−3 d−1, respectively. However, nitrogen removal processes were negatively affected when applied OLR was 7.0 kg COD m−3 d−1 and NLR was 1.26 kg N m−3 d−1. The operational cycle of the reactor was modified by reducing the volumetric exchange ratio from 50 to 6% in order to be able to treat the raw slurry without dilution.

scholarly journals Stuydy on sequencing batch moving bed membrane bioreactor technology (SBMBMBR) for the removal of organic and total nitrogen in tannery wastewater

2014 ◽  
Vol 17 (2) ◽  
pp. 69-79
Author(s):  
Linh Van Tran ◽  
Phuoc Van Nguyen ◽  
Phuong Thi Thanh Nguyen
Keyword(s):  
Removal Efficiency ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Loading Rate ◽  
Nitrogen Loading ◽  
Cod Removal ◽  
Tannery Wastewater ◽  
Moving Bed ◽  
Cod Removal Efficiency

The SBMBMBR technology (sequencing batch moving bed membrane bioreactor), a combiantion of membrane filtration MF process in activated sludge with sequencing batch (SBR) moving bed using Anox Kaldnes K2 (MBBR), has been studied for the removal of organic and total nitrogen in tannery wastewater. After 170 days, reasearch results showed that the COD removal efficiency was ranged from 89,2±0,6 to 95,9±0,3% when the organic loading rate changed from 0,564±0,019 to 1.207±99 kgCOD/m3/day. The total nitrogen removal efficiency reached 30,0±4,9 to 65,9±13,3. The highest COD removal efficiency was 0,72±0,02 kgCOD/m3/day. The lowest nitrogen removal efficiency was 10,8±5,4% at 0,327±0,020 kgTN/m3/day of nitrogen loading rate. During the research, the adhensional tension of microorganism was insignificant. The biomass remained unchanged with 6.808±226 mg/L of Mixed liquor suspended solids (MLSS). When the salinity went up from 3.500 to 8.000 mgCl/l, the COD and nitrogen removal efficiency decreased. However, the conversion of nitrogen was improved and the recovery of biomass following the changed loading rate was quite fast.

scholarly journals NITROGEN REMOVAL IN THE ANAMMOX BIOFILM REACTOR USING PALM FIBER AS CARRIER IN TROPICAL TEMPERATURE OPERATION

2019 ◽  
Vol 10 (2) ◽  
pp. 7-15
Author(s):  
Zulkarnaini Zulkarnaini ◽  
Ansiha Nur ◽  
Wina Ermaliza
Keyword(s):  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Laboratory Scale ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Ammonium Oxidation ◽  
Palm Fiber ◽  
Anammox Process

Anaerobic ammonium oxidation (anammox) is the process of converting ammonium directly into nitrogen gas with nitrite as an electron acceptor under anaerobic conditions. This process is more effective than conventional nitrification-denitrification but is very dependent on several parameters, one of which is temperature. The optimum temperature range for the growth of anammox bacteria is 30-400C. The purpose of this research was to determine the efficiency of nitrogen removal by anammox process using palm fibers in the Up-Flow Anaerobic Sludge Blanket (UASB) reactor in the tropical temperature. The experiment was conducted at a laboratory scale with a variation of Hydraulic Retention Time (HRT) 24 h and 12 h using artificial wastewater. The reactor was inoculated with anammox granule genus Candidatus Brocadia. The concentration of ammonium, nitrite, and nitrate in the influent and effluent were measured using a UV-Vis spectrophotometer based on standard method. Based on the experiment, the ratio ΔNH4+-N:ΔNO2--N and ΔNO3--N:ΔNH4+-N similar with stoichiometric of anammox. The maximum Nitrogen removal performance (NRT) achieved 0.11 kg-N/m3.d at Nitrogen Loading Rate (NLR) 0.14 kg-N/m3.d and 0.20 kg-N/m3.d at NLR 0.29 kg-N/m3.d. The removal efficiency for Ammonium Conversion Efficiency (ACE) and Nitrogen Removal Efficiency (NRE) in HRT 24 h were 79% and 76%, respectively while decreased in HRT 12 h were 72% and 69%, respectively. Anammox process can be applied in the tropical temperature at a laboratory scale using a UASB reactor with palm fiber as the carrier.

Nitrogen removal from reject water with primary sludge as denitrification carbon source

2010 ◽  
Vol 61 (12) ◽  
pp. 2965-2972 ◽  
Author(s):  
L. Zhang ◽  
S. J. Zhang ◽  
J. Zhou ◽  
S. Y. Wang ◽  
Y. P. Gan ◽  
...  
Keyword(s):  
Carbon Source ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Loading Rate ◽  
Suspended Solid ◽  
Nitrogen Loading ◽  
Solid Retention Time ◽  
Primary Sludge ◽  
Reject Water ◽  
Denitrification Reactor

A novel system was used for nitrogen removal from reject water. This system includes one anoxic/oxic reactor for nitrification and a special reactor for denitrification in which primary sludge was added intermittently as electron donor. In denitrification reactor, sludge fermentation and denitrification reaction took place simultaneously and promoted each other. It was found that effluent recycle could improve nitrogen removal efficiency due to reclaiming of alkalinity. Under steady state conditions, the average solid retention time (SRT) in denitrification reactor was 12–15 d, a total nitrogen loading rate was 0.2 kg N/(m3 day) and TN removal efficiency was more than 90% without extra carbon source addition. Primary sludge was degraded so that volatile suspended solid (VSS) decreased by 50%. Further investigation showed that ORP could be taken as a control parameter for sludge addition.

Sign in / Sign up

Export Citation Format

Share Document