scholarly journals A bibliometric study on biomimetic and bioinspired membranes for water filtration

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Gaurav Goel ◽  
Claus Hélix-Nielsen ◽  
Hari M. Upadhyaya ◽  
Saurav Goel

AbstractInsights into the biological channels and synthetic pore-forming assemblies have elucidated many fundamental aspects of selective water and solute transport over the last few decades. This has led to the development of novel technologies with unique selectivity and permeability. In terms of membrane separation technology, this development has proceeded by adapting either of two approaches: (i) one where biological channel proteins are reconstituted in suitable materials mimicking the biological bilayer membrane and (ii) one where selective transport is mimicked in synthetic structures. The development of water filtration membranes in the former approach takes advantage of aquaporin proteins as representative building blocks and that of carbon nanotubes and molecular pore-forming assemblies in the latter approach. The first approach is often referred to as the field dominated by biomimetic membranes and the latter referred to as artificial water channels. In this study, a bibliometric analysis was conducted to investigate trends in these two areas based on growing publication trends, peer-reviewed journal selection, countries, institutions, authors, and collaborative networks. A total of 3199 records available from Scopus between 1962 and 2021 were extracted and analyzed. The results showed strong international collaborations and highlighted leading researchers and hubs of excellence in these two areas. This is very timely considering that the UN climate change conference (COP26) in Glasgow, UK later this year will bring focus to the global need for water treatment technologies. This work can serve as a quick reference for early-career researchers and industries working in the area of membrane development for water purification/filtration.

2021 ◽  
Vol 28 (8) ◽  
pp. 10262-10282
Author(s):  
Kanwal Shahid ◽  
Varsha Srivastava ◽  
Mika Sillanpää

AbstractEconomic growth and the rapid increase in the world population has led to a greater need for natural resources, which in turn, has put pressure on said resources along with the environment. Water, food, and energy, among other resources, pose a huge challenge. Numerous essential resources, including organic substances and valuable nutrients, can be found in wastewater, and these could be recovered with efficient technologies. Protein recovery from waste streams can provide an alternative resource that could be utilized as animal feed. Membrane separation, adsorption, and microbe-assisted protein recovery have been proposed as technologies that could be used for the aforementioned protein recovery. This present study focuses on the applicability of different technologies for protein recovery from different wastewaters. Membrane technology has been proven to be efficient for the effective concentration of proteins from waste sources. The main emphasis of the present short communication is to explore the possible strategies that could be utilized to recover or restore proteins from different wastewater sources. The presented study emphasizes the applicability of the recovery of proteins from various waste sources using membranes and the combination of the membrane process. Future research should focus on novel technologies that can help in the efficient extraction of these high-value compounds from wastes. Lastly, this short communication will evaluate the possibility of integrating membrane technology. This study will discuss the important proteins present in different industrial waste streams, such as those of potatoes, poultry, dairy, seafood and alfalfa, and the possible state of the art technologies for the recovery of these valuable proteins from the wastewater. Graphical abstract


Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1752
Author(s):  
Blanca Jalvo ◽  
Andrea Aguilar-Sanchez ◽  
Maria-Ximena Ruiz-Caldas ◽  
Aji P. Mathew

This article presents a comparative study of the surface characteristics and water purification performance of commercially available cellulose nonwoven fabrics modified, via cast coating, with different nano-dimensioned bio-based carbohydrate polymers, viz. cellulose nanocrystals (CNC), TEMPO-oxidized cellulose nanofibers (T-CNF), and chitin nanocrystals (ChNC). The surface-modified nonwoven fabrics showed an improvement in wettability, surface charge modification, and a slight decrease of maximum pore size. The modification improved the water permeance in most of the cases, enhanced the particle separation performance in a wide range of sizes, upgraded the mechanical properties in dry conditions, and showed abiotic antifouling capability against proteins. In addition, T-CNF and ChNC coatings proved to be harmful to the bacteria colonizing on the membranes. This simple surface impregnation approach based on green nanotechnology resulted in highly efficient and fully bio-based high-flux water filtration membranes based on commercially available nonwoven fabrics, with distinct performance for particle rejection, antifouling and antibacterial properties.


2021 ◽  
Author(s):  
Kristian Mikalsen

Abstract This paper demonstrates a pioneering technology adaption for using a membrane-based subsea storage solution for oil/condensate, modified into storing clean energy storage in the form of ammonia (as a hydrogen energy carrier). The immediate application will provide an economical alternative to electrification of offshore platforms, instead of using expensive cables from shore. Storing ammonia at the seabed using innovative subsea storage technologies will dramatically reduce CO2 emissions for offshore assets. The fluid will be stored in a safe manner on the seafloor, protecting both personnel and marine life. The next step will be to include subsea ammonia storage as part of the global logistical value chain, which can power the merchant shipping fleet. Clean ammonia can be produced using renewable resources as wind or solar. It focuses on bridging the ongoing oil/condensate storage qualification, adapted into storing ammonia. The large-scale verification test scope is explained, and we show how the test is extended to also prove the concept of safe energy/ammonia storage. The ammonia storage concept is explained, and we show how this can be included as part of a low carbon future. The focus is the immediate market for providing clean power to existing or new offshore assets. The full system solution will encompass storage tanks placed nearby the platforms at safe water depths, riser systems providing fuel to the ammonia power generators, and the tank filling systems. Bridging and adapting technologies from the petroleum industry into renewables shows the importance of utilizing the technology developments and competence of the oil and gas business. The technical evaluations have shown that the oil/condensate storage can be adapted into storing energy/ammonia with minor modifications. Converting hydrogen into ammonia gives slight energy losses, but it is defended by the large economic benefits of storing ammonia versus pressure storage of hydrogen. The paper presents qualification work already completed and how to implement ammonia fuel storage for platforms. In addition, we show the test setup for a large-scale qualification provided by an original equipment manufacturer (OEM) company together with major Operators. Innovative modular design methods have shown that the concept can be included on existing offshore assets, which have limited topside space available. Adding green or blue ammonia as an alternative to power cables from shore have several benefits, and many of the connecting building blocks are falling into place. The main conclusion is how to adapt Novel technologies from the oil industry to store ammonia in a safe way on the seafloor.


2018 ◽  
Vol 6 (4) ◽  
pp. 1692-1699 ◽  
Author(s):  
Mingming Liu ◽  
Lu Tie ◽  
Jing Li ◽  
Yuanyuan Hou ◽  
Zhiguang Guo

Inspired by sarcocarps, metal–organic frameworks (MOFs) that can capture moisture spontaneously are presented as building blocks for the construction of underoil superhydrophilic surfaces. The MOF coating showed excellent self-cleaning properties to crude oil under water, and achieved on-demand emulsion separation through selective water filtration and adsorption.


AIChE Journal ◽  
2015 ◽  
Vol 62 (2) ◽  
pp. 508-524 ◽  
Author(s):  
Melissa C. Santos ◽  
Yossef A. Elabd ◽  
Yin Jing ◽  
Brian P. Chaplin ◽  
Lei Fang

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 691 ◽  
Author(s):  
Ismara Nadir ◽  
Nosheen Fatima Rana ◽  
Nasir Mahmood Ahmad ◽  
Tahreem Tanweer ◽  
Amna Batool ◽  
...  

Plant phytochemicals have potential decontaminating properties, however, their role in the amelioration of hydrophobic water filtration membranes have not been elucidated yet. In this work, phytochemicals (i.e., cannabinoids (C) and terpenes (T) from C. sativa) were revealed for their antibacterial activity against different Gram-positive and Gram-negative bacteria. As such, a synergistic relationship was observed between the two against all strains. These phytochemicals individually and in combination were used to prepare polyethersulfone (PES) hybrid membranes. Membrane characterizations were carried out using scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy. Moreover, contact angle, water retention, surface roughness, mechanical testing, and X-ray florescence analysis were also carried out. According to results, the CT-PES hybrid membrane exhibited the lowest contact angle (40°), the highest water retention (70%), and smallest average pore size (0.04 µm). The hybrid membrane also exhibited improved water flux with no surface leaching. Quantitative bacterial decline analysis of the CT-PES hybrid membranes confirmed an effective antibacterial performance against Gram-positive and Gram-negative bacteria. The results of this study established cannabinoids and terpenes as an inexpensive solution for PES membrane surface modification. These hybrid membranes can be easily deployed at an industrial scale for water filtration purposes.


2010 ◽  
Vol 2 (3) ◽  
pp. 847-853 ◽  
Author(s):  
William A. Phillip ◽  
Brandon O’Neill ◽  
Marc Rodwogin ◽  
Marc A. Hillmyer ◽  
E. L. Cussler

Sign in / Sign up

Export Citation Format

Share Document