scholarly journals Cryo-EM model validation recommendations based on outcomes of the 2019 EMDataResource challenge

2021 ◽  
Vol 18 (2) ◽  
pp. 156-164 ◽  
Author(s):  
Catherine L. Lawson ◽  
Andriy Kryshtafovych ◽  
Paul D. Adams ◽  
Pavel V. Afonine ◽  
Matthew L. Baker ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Structure Data ◽  
Model Evaluation ◽  
Data Bank ◽  
High Accuracy ◽  
Atomic Resolution ◽  
Software Developers ◽  
Data Archives ◽  
Modeling Software

AbstractThis paper describes outcomes of the 2019 Cryo-EM Model Challenge. The goals were to (1) assess the quality of models that can be produced from cryogenic electron microscopy (cryo-EM) maps using current modeling software, (2) evaluate reproducibility of modeling results from different software developers and users and (3) compare performance of current metrics used for model evaluation, particularly Fit-to-Map metrics, with focus on near-atomic resolution. Our findings demonstrate the relatively high accuracy and reproducibility of cryo-EM models derived by 13 participating teams from four benchmark maps, including three forming a resolution series (1.8 to 3.1 Å). The results permit specific recommendations to be made about validating near-atomic cryo-EM structures both in the context of individual experiments and structure data archives such as the Protein Data Bank. We recommend the adoption of multiple scoring parameters to provide full and objective annotation and assessment of the model, reflective of the observed cryo-EM map density.

scholarly journals Outcomes of the 2019 EMDataResource model challenge: validation of cryo-EM models at near-atomic resolution

2020 ◽  
Author(s):  
Catherine L. Lawson ◽  
Andriy Kryshtafovych ◽  
Paul D. Adams ◽  
Pavel V. Afonine ◽  
Matthew L. Baker ◽  
...  
Keyword(s):  
Laboratory Experiments ◽  
Data Bank ◽  
Atomic Resolution ◽  
Model Quality ◽  
Software Developers ◽  
Data Archives ◽  
Imaging Experiment ◽  
Modeling Software ◽  
Pros And Cons

AbstractThis paper describes outcomes of the 2019 Cryo-EM Map-based Model Metrics Challenge sponsored by EMDataResource (www.emdataresource.org). The goals of this challenge were (1) to assess the quality of models that can be produced using current modeling software, (2) to check the reproducibility of modeling results from different software developers and users, and (3) compare the performance of current metrics used for evaluation of models. The focus was on near-atomic resolution maps with an innovative twist: three of four target maps formed a resolution series (1.8 to 3.1 Å) from the same specimen and imaging experiment. Tools developed in previous challenges were expanded for managing, visualizing and analyzing the 63 submitted coordinate models, and several novel metrics were introduced. The results permit specific recommendations to be made about validating near-atomic cryo-EM structures both in the context of individual laboratory experiments and holdings of structure data archives such as the Protein Data Bank. Our findings demonstrate the relatively high accuracy and reproducibility of cryo-EM models derived from these benchmark maps by 13 participating teams, representing both widely used and novel modeling approaches. We also evaluate the pros and cons of the commonly used metrics to assess model quality and recommend the adoption of multiple scoring parameters to provide full and objective annotation and assessment of the model, reflective of the observed density in the cryo-EM map.

scholarly journals On the explicit use of experimental images in high resolution cryo-EM refinement

F1000Research ◽  
2019 ◽  
Vol 8 ◽  
pp. 665
Author(s):  
Jacqueline Cherfils ◽  
Jorge Navaza
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Structural Biology ◽  
Single Particle ◽  
Atomic Resolution ◽  
Full Potential ◽  
X Ray ◽  
X Ray Crystallography ◽  
Atomic Models

Single particle cryogenic electron microscopy (cryo-EM) is transforming structural biology by enabling the analysis of difficult macromolecular specimens, such as membrane proteins or large complexes with flexible elements, at near atomic resolution with an accuracy close to that of X-ray crystallography. As the technique continues to improve, it is important to assess and exploit its full potential to produce the most possible reliable atomic models. Here we propose to use the experimental images as the data for refinement and validation, instead of the reconstructed maps as currently used. This procedure, which is in spirit quite similar to that used in X-ray crystallography where the data include experimental phases, should contribute to improve the quality of the cryo-EM atomic models.

scholarly journals New wwPDB validation pipelines for X-ray, NMR and 3DEM structures

2014 ◽  
Vol 70 (a1) ◽  
pp. C1478-C1478
Author(s):  
Swanand Gore ◽  
Pieter Hendrickx ◽  
Eduardo Sanz-Garcia ◽  
Sameer Velankar ◽  
Gerard Kleywegt
Keyword(s):  
Electron Microscopy ◽  
Protein Data Bank ◽  
Data Bank ◽  
X Ray ◽  
Task Forces ◽  
Annotation System ◽  
Electron Microscopy Data ◽  
Microscopy Data ◽  
Machine Readable

The Protein Data Bank (PDB) is the single global archive of 3D biomacromolecular structure data. The archive is managed by the Worldwide Protein Data Bank (wwPDB; wwpdb.org) organisation through its partners, the Research Collaboratory for Structural Bioinformatics (RCSB PDB), the Protein Data Bank Japan (PDBj), the Protein Data Bank in Europe and the Biological Magnetic Resonance Bank (BMRB). Analogously, the Electron Microscopy Data Bank (EMDB) is managed by the EMDataBank (emdatabank.org) organisation. A few years ago, realising the needs and opportunities to assess the quality of biomacromolecular structures deposited in the PDB, the wwPDB and EMDataBank partners established Validation Task Forces (VTFs) to advice them on up-to-date and community-agreed methods and standards to validate X-ray, NMR and 3DEM structures and data. All three VTFs have now published their recommendations (1, 2, 3) and these are getting implemented as validation-software pipelines . The pipelines are integrated in the new joint wwPDB deposition and annotation system (http://deposit.wwpdb.org/deposition/). In addition, stand-alone servers are provided to allow practising structural biologists to validate models prior to publication and deposition (http://wwpdb.org/validation-servers.html). The validation pipelines and the output they produce (human-readable PDF reports and machine-readable XML files) will be described.

scholarly journals On the explicit use of experimental images in high resolution cryo-EM refinement

F1000Research ◽  
2019 ◽  
Vol 8 ◽  
pp. 665
Author(s):  
Jacqueline Cherfils ◽  
Jorge Navaza
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Membrane Proteins ◽  
Structural Biology ◽  
Single Particle ◽  
Atomic Resolution ◽  
Full Potential ◽  
X Ray ◽  
X Ray Crystallography

Single particle cryogenic electron microscopy (cryo-EM) is transforming structural biology by enabling the analysis of difficult macromolecular specimens, such as membrane proteins or large complexes with flexible elements, at near atomic resolution with an accuracy close to that of X-ray crystallography. As the technique continues to improve, it is important to assess and exploit its full potential to produce the most possible reliable atomic models. Here we propose to use the experimental images as the data for refinement and validation, instead of the reconstructed maps as currently used. This procedure, which is in spirit quite similar to that used in X-ray crystallography where the data include experimental phases, should contribute to improve the quality of the models.

The Current Situation in Chemical Stabilization of Biological Materials

1972 ◽  
Vol 30 ◽  
pp. 132-133
Author(s):  
John H. Luft
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Osmium Tetroxide ◽  
Molecular Level ◽  
Cross Linking ◽  
Chemical Stabilization ◽  
Specimen Preparation ◽  
Sufficient Condition ◽  
Radio Telescopes

With information processing devices such as radio telescopes, microscopes or hi-fi systems, the quality of the output often is limited by distortion or noise introduced at the input stage of the device. This analogy can be extended usefully to specimen preparation for the electron microscope; fixation, which initiates the processing sequence, is the single most important step and, unfortunately, is the least well understood. Although there is an abundance of fixation mixtures recommended in the light microscopy literature, osmium tetroxide and glutaraldehyde are favored for electron microscopy. These fixatives react vigorously with proteins at the molecular level. There is clear evidence for the cross-linking of proteins both by osmium tetroxide and glutaraldehyde and cross-linking may be a necessary if not sufficient condition to define fixatives as a class.

Characterization of homoepitaxial diamond films by Electron microscopy

1991 ◽  
Vol 49 ◽  
pp. 880-881
Author(s):  
D.P. Malta ◽  
S.A. Willard ◽  
R.A. Rudder ◽  
G.C. Hudson ◽  
J.B. Posthill ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Surface Defects ◽  
Substrate Surface ◽  
Diamond Films ◽  
Chemical Vapor ◽  
Polycrystalline Diamond ◽  
Large Degree ◽  
Rf Plasma ◽  
Semiconducting Diamond

Semiconducting diamond films have the potential for use as a material in which to build active electronic devices capable of operating at high temperatures or in high radiation environments. A major goal of current device-related diamond research is to achieve a high quality epitaxial film on an inexpensive, readily available, non-native substrate. One step in the process of achieving this goal is understanding the nucleation and growth processes of diamond films on diamond substrates. Electron microscopy has already proven invaluable for assessing polycrystalline diamond films grown on nonnative surfaces.The quality of the grown diamond film depends on several factors, one of which is the quality of the diamond substrate. Substrates commercially available today have often been found to have scratched surfaces resulting from the polishing process (Fig. 1a). Electron beam-induced current (EBIC) imaging shows that electrically active sub-surface defects can be present to a large degree (Fig. 1c). Growth of homoepitaxial diamond films by rf plasma-enhanced chemical vapor deposition (PECVD) has been found to planarize the scratched substrate surface (Fig. 1b).

The annealed (0001) α-alumina surface and its influence on thin-film growth

1995 ◽  
Vol 53 ◽  
pp. 336-337
Author(s):  
Michael W. Bench ◽  
Paul G. Kotula ◽  
C. Barry Carter
Keyword(s):  
Electron Microscopy ◽  
Surface Energy ◽  
Film Growth ◽  
Thin Film Growth ◽  
Energy Calculations ◽  
Transmission Electron ◽  
Reflection Electron Microscopy ◽  
Low Energy Electron ◽  
Surface Nature

The growth of semiconductors, superconductors, metals, and other insulators has been investigated using alumina substrates in a variety of orientations. The surface state of the alumina (for example surface reconstruction and step nature) can be expected to affect the growth nature and quality of the epilayers. As such, the surface nature has been studied using a number of techniques including low energy electron diffraction (LEED), reflection electron microscopy (REM), transmission electron microscopy (TEM), molecular dynamics computer simulations, and also by theoretical surface energy calculations. In the (0001) orientation, the bulk alumina lattice can be thought of as a layered structure with A1-A1-O stacking. This gives three possible terminations of the bulk alumina lattice, with theoretical surface energy calculations suggesting that termination should occur between the Al layers. Thus, the lattice often has been described as being made up of layers of (Al-O-Al) unit stacking sequences. There is a 180° rotation in the surface symmetry of successive layers and a total of six layers are required to form the alumina unit cell.

Stain contamination and embedding in electron microscopy

1986 ◽  
Vol 44 ◽  
pp. 50-53
Author(s):  
Hilton H. Mollenhauer
Keyword(s):  
Electron Microscopy ◽  
Information Retrieval ◽  
Epoxy Resins ◽  
Image Contrast ◽  
Sample Preservation ◽  
Factors Associated ◽  
Amount Of Information ◽  
Electron Microscopical ◽  
Contrast Information

Many factors (e.g., resolution of microscope, type of tissue, and preparation of sample) affect electron microscopical images and alter the amount of information that can be retrieved from a specimen. Of interest in this report are those factors associated with the evaluation of epoxy embedded tissues. In this context, informational retrieval is dependant, in part, on the ability to “see” sample detail (e.g., contrast) and, in part, on tue quality of sample preservation. Two aspects of this problem will be discussed: 1) epoxy resins and their effect on image contrast, information retrieval, and sample preservation; and 2) the interaction between some stains commonly used for enhancing contrast and information retrieval.

Methods to Monitor and Improve the Performance of Specimen Holders for Transmission Electron Cryomicroscopy

1996 ◽  
Vol 54 ◽  
pp. 454-455
Author(s):  
B. L. Armbruster ◽  
B. Kraus ◽  
M. Pan
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Electron Beam Irradiation ◽  
Beam Irradiation ◽  
Quality Of Data ◽  
Electron Cryomicroscopy ◽  
Thermal Equilibration ◽  
Transmission Electron ◽  
Electron Microscopes

One goal in electron microscopy of biological specimens is to improve the quality of data to equal the resolution capabilities of modem transmission electron microscopes. Radiation damage and beam- induced movement caused by charging of the sample, low image contrast at high resolution, and sensitivity to external vibration and drift in side entry specimen holders limit the effective resolution one can achieve. Several methods have been developed to address these limitations: cryomethods are widely employed to preserve and stabilize specimens against some of the adverse effects of the vacuum and electron beam irradiation, spot-scan imaging reduces charging and associated beam-induced movement, and energy-filtered imaging removes the “fog” caused by inelastic scattering of electrons which is particularly pronounced in thick specimens.Although most cryoholders can easily achieve a 3.4Å resolution specification, information perpendicular to the goniometer axis may be degraded due to vibration. Absolute drift after mechanical and thermal equilibration as well as drift after movement of a holder may cause loss of resolution in any direction.

Sign in / Sign up

Export Citation Format

Share Document