scholarly journals Direct and rapid measurement of hydrogen peroxide in human blood using a microfluidic device

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. Gaikwad ◽  
P. R. Thangaraj ◽  
A. K. Sen

AbstractThe levels of hydrogen peroxide ($${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 ) in human blood is of great relevance as it has emerged as an important signalling molecule in a variety of disease states. Fast and reliable measurement of $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 levels in the blood, however, continues to remain a challenge. Herein we report an automated method employing a microfluidic device for direct and rapid measurement of $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 in human blood based on laser-induced fluorescence measurement. Our study delineates the critical factors that affect measurement accuracy—we found blood cells and soluble proteins significantly alter the native $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 levels in the time interval between sample withdrawal and detection. We show that separation of blood cells and subsequent dilution of the plasma with a buffer at a ratio of 1:6 inhibits the above effect, leading to reliable measurements. We demonstrate rapid measurement of $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 in plasma in the concentration range of 0–49 µM, offering a limit of detection of 0.05 µM, a sensitivity of 0.60 µM−1, and detection time of 15 min; the device is amenable to the real-time measurement of $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 in the patient’s blood. Using the linear correlation obtained with known quantities of $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 , the endogenous $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 concentration in the blood of healthy individuals is found to be in the range of 0.8–6 µM. The availability of this device at the point of care will have relevance in understanding the role of $${\mathrm{H}}_{2}{\mathrm{O}}_{2}$$ H 2 O 2 in health and disease.

2020 ◽  
Author(s):  
Ravindra Gaikwad ◽  
Paul Thangaraj ◽  
Ashis Sen

Abstract The levels of hydrogen peroxide (H2O2) in human blood is of great relevance as it has emerged as an important signalling molecule in a variety of disease states. Fast and reliable measurement of H2O2 levels in the blood, however, continues to remain a challenge. Herein we report an automated method employing a microfluidic device for direct and rapid measurement of H2O2 in human blood based on laser-induced fluorescence measurement. Our study delineates the critical factors that affect measurement accuracy – we found blood cells and soluble proteins significantly alter the native H2O2 levels in the time interval between sample withdrawal and detection. We show that separation of blood cells and subsequent dilution of the plasma with a buffer at a ratio of 1:6 inhibits the above effect, leading to reliable measurements. We demonstrate rapid measurement of in plasma in the concentration range of 0 – 49 µM, offering a limit of detection of 0.05 µM, a sensitivity of 0.60 µM-1, and detection time of 15 min; the device is amenable to the real-time measurement of H2O2 in the patient’s blood. Using the linear correlation obtained with known quantities of H2O2, the endogenous H2O2 concentration in the blood of healthy individuals is found to be in the range 2 – 6 µM. The availability of this device at the point of care will have relevance in understanding the role of H2O2 in health and disease.


2019 ◽  
Vol 5 (1) ◽  
pp. 54-61
Author(s):  
Jun Lu ◽  
David G Grenache

Abstract Background Pyruvate kinase (PK) deficiency is the most common cause of nonspherocytic hemolytic anemia owing to defective glycolysis. This study developed and validated an automated method to measure PK activity in red blood cells (RBCs). Methods PK catalyzes the reaction of phosphoenolpyruvate with ADP to form pyruvate and ATP. The pyruvate is reduced in the presence of lactate dehydrogenase and NADH to produce lactate and NAD+. The rate of absorbance decrease at 340 nm is proportional to PK activity. PK and hemoglobin (Hb) measurements were performed on a Roche cobas c501 analyzer. After establishing a k-factor, accuracy, linearity, imprecision, sensitivity, and stability were validated and the reference interval was verified. Results The k-factor was −9477. Accuracy was evaluated by method comparison (n = 56). Linear regression yielded y = 1.0x − 0.57, and R2 of 0.93. Linearity was determined by combining a high sample with hemolyzing solution in 6 different ratios. Linear regression analysis yielded y = 1.02x − 2.68, and R2 of 1.0. The assay was linear to 87 U/dL. Precision was evaluated by testing hemolysates in 3 replicates/day for 10 days. Within-run imprecision was 1.9% and 2.5% and total imprecision was 4.0% and 5.6% at 14.0 and 8.1 U/g Hb, respectively. The limit of blank was 0.0, and the limit of detection was 1.0 U/dL. Stability was determined in 4 sample types at 3 different temperatures; the changes were all <10% when compared with t0. The current PK reference interval of 4.6 to 11.2 U/g Hb was verified. Conclusions This automated assay for quantifying PK in RBCs has acceptable performance characteristics and is fit for intended use.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1366
Author(s):  
Jaehoon Kim ◽  
Junghyo Yoon ◽  
Jae-Yeong Byun ◽  
Hyunho Kim ◽  
Sewoon Han ◽  
...  

Blood plasma is a source of biomarkers in blood and a simple, fast, and easy extraction method is highly required for point-of-care testing (POCT) applications. This paper proposes a membrane filter integrated microfluidic device to extract blood plasma from whole blood, without any external instrumentation. A commercially available membrane filter was integrated with a newly designed dual-cover microfluidic device to avoid leakage of the extracted plasma and remaining blood cells. Nano-interstices installed on both sides of the microfluidic channels actively draw the extracted plasma from the membrane. The developed device successfully supplied 20 μL of extracted plasma with a high extraction yield (~45%) in 16 min.


Biosensors ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 381
Author(s):  
Donato Calabria ◽  
Martina Zangheri ◽  
Ilaria Trozzi ◽  
Elisa Lazzarini ◽  
Andrea Pace ◽  
...  

Microfluidic paper analytical devices (µPADs) represent one of the most appealing trends in the development of simple and inexpensive analytical systems for diagnostic applications at the point of care (POC). Herein, we describe a smartphone-based origami µPAD for the quantitative determination of glucose in blood samples based on the glucose oxidase-catalyzed oxidation of glucose leading to hydrogen peroxide, which is then detected by means of the luminol/hexacyanoferrate(III) chemiluminescent (CL) system. By exploiting the foldable µPAD format, a two-step analytical procedure has been implemented. First, the diluted blood sample was added, and hydrogen peroxide was accumulated, then the biosensor was folded, and a transport buffer was added to bring hydrogen peroxide in contact with CL reagents, thus promoting the CL reaction. To enable POC applicability, the reagents required for the assay were preloaded in the µPAD so that no chemicals handling was required, and a 3D-printed portable device was developed for measuring the CL emission using the smartphone’s CMOS camera. The µPAD was stable for 30-day storage at room temperature and the assay, displaying a limit of detection of 10 µmol L−1, proved able to identify both hypoglycemic and hyperglycemic blood samples in less than 20 min.


2021 ◽  
Author(s):  
SATHEESH NATARAJAN ◽  
Ebru saatci

Abstract This study aimed to establish a Europium label time-resolved fluorescence immunoassay (TRFIA) to detect the chronic kidney disease (CKD) biomarker Cystatin-C. Some Cystatin-c immunoassays are sensitive, accurate, and available for clinical application, but they are expensive and time-consuming procedures. Also, conventional organic dye-based fluorescence lateral flow assay showed more background fluorescence interference and low analytical sensitivity. So this Europium-based sandwich immunoassay was developed to detect the concentration of cystatin-c in a urine sample with captured anti-cystatin-c antibodies immobilized on nitrocellulose membrane and then bonded with detection anti-cystatin-c labelled with CM-EU, followed by fluorescence measurement using time-resolved fluorometry in 15 minutes. The performance of this TRFIA was evaluated using the clinical urine serum and compared with the ELISA assays. The linear calibration range was 0.015-32 µg/ml, and the limit of detection (LOD) quantified was 0.0001µg/ml. This current work has improved the LOD of our previous work from 0.013µg/ml to 0.001µg/ml. These results indicated that the CM-EU nanoparticle-based LFIA is rapid, more sensitive, reliable, and reproducible for point-of-care testing of Cys-C concentrations in urine


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Jalal Uddin ◽  
Nabil H. Bhuiyan ◽  
Joon S. Shim

AbstractIn this work, a fully integrated active microfluidic device transforming a conventional 96-well kit into point-of-care testing (POCT) device was implemented to improve the performance of traditional enzyme-linked immunosorbent assay (ELISA). ELISA test by the conventional method often requires the collection of 96 samples for its operation as well as longer incubation time from hours to overnight, whereas our proposed device conducts ELISA immediately individualizing a 96-well for individual patients. To do that, a programmable and disposable on-chip pump and valve were integrated on the device for precise control and actuation of microfluidic reagents, which regulated a reaction time and reagent volume to support the optimized protocols of ELISA. Due to the on-chip pump and valve, ELISA could be executed with reduced consumption of reagents and shortening the assay time, which are crucial for conventional ELISA using 96-well microplate. To demonstrate highly sensitive detection and easy-to-use operation, this unconventional device was successfully applied for the quantification of cardiac troponin I (cTnI) of 4.88 pg/mL using a minimum sample volume of 30 µL with a shorter assay time of 15 min for each ELISA step. The limit of detection (LOD) thus obtained was significantly improved than the conventional 96-well platform.


Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 376
Author(s):  
Jia-Ming Yang ◽  
Nien-Zu Yang ◽  
Cheng-Hao Chen ◽  
Cheng-Sheng Huang

Portable systems for detecting biomolecules have attracted considerable attention, owing to the demand for point-of-care testing applications. This has led to the development of lab-on-a-chip (LOC) devices. However, most LOCs are developed with a focus on automation and preprocessing of samples; fluorescence measurement, which requires additional off-chip detection instruments, remains the main detection method in conventional assays. By incorporating optical biosensors into LOCs, the biosensing system can be simplified and miniaturized. However, many optical sensors require an additional coupling device, such as a grating or prism, which complicates the optical path design of the system. In this study, we propose a new type of biosensor based on gradient waveguide thickness guided-mode resonance (GWT-GMR), which allows for the conversion of spectral information into spatial information such that the output signal can be recorded on a charge-coupled device for further analysis without any additional dispersive elements. A two-channel microfluidic chip with embedded GWT-GMRs was developed to detect two model assays in a buffer solution: albumin and creatinine. The results indicated that the limit of detection for albumin was 2.92 μg/mL for the concentration range of 0.8–500 μg/mL investigated in this study, and that for creatinine it was 12.05 μg/mL for the concentration range of 1–10,000 μg/mL. These results indicated that the proposed GWT-GMR sensor is suitable for use in clinical applications. Owing to its simple readout and optical path design, the GWT-GMR is considered ideal for integration with smartphones or as miniaturized displays in handheld devices, which could prove beneficial for future point-of-care applications.


2014 ◽  
Vol 48 (5) ◽  
pp. 542-549 ◽  
Author(s):  
S. Bekeschus ◽  
J. Kolata ◽  
C. Winterbourn ◽  
A. Kramer ◽  
R. Turner ◽  
...  

Author(s):  
Holden Li ◽  
Vipin Vitikkate ◽  
Thomas Kenny

Engineers have long envisioned that a handheld portable blood diagnosis device would be able to give an accurate measurement of chemical content based on a very small sample in the shortest time possible. One of the immediate applications of such device is the Point Of Care (POC) diagnosis system, whereby a single drop of human blood would determine his health status. However, a major technical challenge lies in the ability to separate different particles, which in the case of human blood, is to separate red and white blood cells and plasma in a quick, cheap, reliable device with low power consumption (less than 100mW). In this paper, we present some preliminary results from our tests of ultrasound standing waves as a potential separation mechanism for blood cells. Micro Particle Image Velocimetry (PIV) technique is the studies.


Sign in / Sign up

Export Citation Format

Share Document