scholarly journals Surface area and pore size characteristics of nanoporous gold subjected to thermal, mechanical, or surface modification studied using gas adsorption isotherms, cyclic voltammetry, thermogravimetric analysis, and scanning electron microscopy

2012 ◽  
Vol 22 (14) ◽  
pp. 6733 ◽  
Author(s):  
Yih Horng Tan ◽  
Jason A. Davis ◽  
Kohki Fujikawa ◽  
N. Vijaya Ganesh ◽  
Alexei V. Demchenko ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cyclic Voltammetry ◽  
Surface Modification ◽  
Thermogravimetric Analysis ◽  
Pore Size ◽  
Surface Area ◽  
Gas Adsorption ◽  
Nanoporous Gold ◽  
Scanning Electron

scholarly journals Effect of KOH Activator on the Performance of Activated Carbon from Oil Palm Kernel Shell as Supercapacitor Electrode Material

2020 ◽  
Vol 9 (1) ◽  
pp. 13-19 ◽  
Author(s):  
Yola Azli Perdana ◽  
Rahma Joni ◽  
Emriadi Emriadi ◽  
Hemansyah Aziz
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cyclic Voltammetry ◽  
Activated Carbon ◽  
Surface Area ◽  
Palm Kernel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Palm Kernel Shell ◽  
Scanning Electron

Karbon aktif dari cangkang kelapa sawit sebagai bahan elektroda superkapasitor telah diteliti. Superkapasitor dirangkai dengan metoda plat/sandwich yang dipisahkan oleh separator. Untuk mendapatkan nilai kapasitansi yang besar dilakukan variasi jumlah aktivator terhadap karbon menggunakan aktivator KOH. Sifat fisikokimia dari karbon aktif diteliti dengan melakukan karakterisasi menggunakan XRD (X-Ray Diffraction), SEM-EDX (Scanning Electron Microscopy-Energy Dispersive X-Ray) dan SAA (Surface Area Analyzer) dan sifat elektrokimianya diteliti dengan pengukuran CV (Cyclic Voltammetry). Karbon aktif dengan perbandingan 1:5 memiliki luas permukaan yang paling besar yaitu 793,326 m2/g dan nilai kapasitansi spesifik tertinggi yaitu 99,151 F/g. The activated carbon from oil palm kernel shell as an electrode material for supercapacitors has been investigated. The supercapasitor was assembled by plate/sandwich methods. Both electrodes were separated by using a separator. To increase the capacitancy value, variations in the number of activators on carbon were carried out using KOH activator. The physicochemical properties of activated carbon were investigated by characterizing using XRD (X-Ray Diffraction), SEM-EDX (Scanning Electron Microscopy-Energy Dispersive X-Ray) and SAA (Surface Area Analyzer) and the electrochemical properties were investigated by measuring CV (Cyclic Voltammetry). Activated carbon with a ratio of 1:5 has the largest surface area of 793,326 m2/g and the highest specific capacitance value is 99,151 F/g.Keywords: activated carbon, supercapasitor, activator, surface area, specific capacitance

Zinc Electrodeposition in the Presence of an Aqueous Electrolyte Containing 1-Ethylpyridinium Bromide: Unexpected Oddities

2017 ◽  
Vol 70 (9) ◽  
pp. 1025 ◽  
Author(s):  
Max E. Easton ◽  
Lisa C. Player ◽  
Anthony F. Masters ◽  
Thomas Maschmeyer
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cyclic Voltammetry ◽  
Aqueous Electrolyte ◽  
Redox Couple ◽  
Nucleation Process ◽  
Zinc Electrodeposition ◽  
Unusual Behaviour ◽  
Scanning Electron

The reversible electrodeposition of zinc was investigated in an aqueous electrolyte containing zinc bromide (50 mM) and 1-ethylpyridinium bromide ([C2Py]Br, 50 mM) by cyclic voltammetry, chronoamperometry, and scanning electron microscopy. Unusual voltammetric behaviour for the Zn/ZnII redox couple was observed in the presence of [C2Py]Br. Passivation of the redox couple was observed after a single deposition–stripping cycle at switching potentials more negative than −1.25 V versus Ag/AgCl. This unusual behaviour was attributed to the reduction of 1-ethylpyridinium cations to pyridyl radicals and their follow-up reactions, which influenced the zinc electrochemistry. This behaviour was further seen to modify the nucleation process of electrodeposition, which altered the morphology of zinc electrodeposits.

Distribution of diaphragmatic lymphatic stomata

1991 ◽  
Vol 70 (4) ◽  
pp. 1544-1549 ◽  
Author(s):  
D. Negrini ◽  
S. Mukenge ◽  
M. Del Fabbro ◽  
C. Gonano ◽  
G. Miserocchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Frequency Distribution ◽  
Maximum Diameter ◽  
Minimum Diameter ◽  
Average Value ◽  
Scanning Electron

In seven anesthetized rabbits we measured the size, shape, and density of lymphatic stomata on the peritoneal and pleural sides of the diaphragm. The diaphragm was fixed in situ and processed for scanning electron microscopy. Results are from 2,902 peritoneal and 3,086 pleural fields (each 1,620 microns 2) randomly chosen from the various specimens. Stomata were seen in 9% of the fields examined, and in 30% of the cases they appeared grouped in clusters with 2-14 stomata/field. Stoma density was 250 +/- 242 and 72 +/- 57 (SD) stomata/mm2 on peritoneal and pleural sides, respectively, and it was similar over the muscular and tendinous portion of the two surfaces. The maximum diameter ranged from less than 1 to approximately 30 microns, with an average value of 1.2 +/- 3.1 micron. The ratio of the maximum to the minimum diameter and the surface area averaged 2 +/- 1.4 and 0.7 +/- 2.4 micron 2, respectively. The maximum and minimum diameter and surface area values followed a lognormal frequency distribution, suggesting that stomata geometry is affected by diaphragmatic tension.

Characterization of Pacemaker Electrode Surfaces Utilizing Scanning Electron Microscopy (SEM) and In-Vitro Electrochemical Analysis

1999 ◽  
Vol 5 (S2) ◽  
pp. 402-403
Author(s):  
Scott Brabec ◽  
Bill Schindeldecker ◽  
Ken Brennen ◽  
Sue Okerstrom ◽  
Ky Pham
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Impedance Spectrum ◽  
Sample Surface ◽  
Electrochemical Analysis ◽  
Platinum Black ◽  
Conductive Surface ◽  
Scanning Electron

The efficiency of implantable electrodes for cardiac pacing depends on the ratio of the conductive surface area to the geometric area of the interface with excitable tissue. New models of heart pacers require reduction of post-pulse polarization, i.e. the potential left on the electrode / tissue interface after a pacemaker pulse. Increasing the conductive surface area is an effective method to this end. Microscopy provides an important tool in elucidating the role of surface structure in electrode performance.Three different surface textures were characterized on a 90% platinum(Pt)/10% iridium (Ir) polished electrode substrate of roughly 5 mm2 geometric surface area. These consisted of the polished substrate itself, a thin film of textured platinum in the 1-3 micron size range, and a sub-micron platinum black coating. Sample surface effects were characterized via scanning electron microscopy (SEM), in-vitro electrical impedance spectrum analysis, and polarization after-potential measurements.

scholarly journals Kesetimbangan Adsorpsi Zat Warna Methyl Violet Oleh Karbon Aktif Berbasis Limbah Daun Nanas (Ananas comosus L)

METANA ◽  
2018 ◽  
Vol 14 (2) ◽  
pp. 31
Author(s):  
Lanjar Lanjar ◽  
Fatma Indah Riayanti ◽  
Widi Astuti
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Surface Area ◽  
Methyl Violet ◽  
Fourier Transform Infrared ◽  
Ananas Comosus ◽  
Ftir Spectrometer ◽  
Model Isotherm ◽  
Scanning Electron

Industri tekstil semakin berkembang seiring dengan pertumbuhan penduduk di Indonesia. Selain memberikan manfaat, industri tekstil  memberikan dampak negatif bagi lingkungan akibat penggunaan zat warna sintetis, salah satunya yaitu methyl violet. Apabila limbah tersebut dibuang ke perairan akan menyebabkan rusaknya ekologi lingkungan dan ancaman bagi kesehatan manusia, karena sebagian besar zat warna bersifat sukar terurai (non-bidegradable) dan karsinogenik (Brono, 2010). Salah satu metode yang terbukti efektif untuk menghilangkan zat warna adalah adsorpsi menggunakan karbon aktif. Pada penelitian ini karbon aktif dibuat dari limbah daun nanas dengan aktivator ZnCl2 dan pemanasan gelombang mikro. Selanjutnya, karbon aktif tersebut dikarakteriasi morfologi permukaan menggunakan Scanning Electron Microscopy (SEM), luas permukaan menggunakan Surface Area Analyzer, dan analisis gugus fungsi menggunakan Fourier Transform Infrared (FTIR) spectrometer, dan digunakan untuk menjerap methyl violet di larutan. Hasil penelitian menunjukkan bahwa karbon aktif dari limbah daun nanas yang teraktivasi ZnCl2 menghasilkan pori yang lebih besar dibandingkan dengan karbon tanpa aktivasi serta memiliki gugus fungsi yang dapat menjerap methyl violet. Kondisi optimum untuk adsorpsi adalah pH 5, waktu kontak 90 menit, dan konsentrasi awal 500 mg/L. Model kesetimbangan yang sesuai yaitu menggunakan model isotherm freundlich.

Regeneration of the Brewing Spent Diatomite

2014 ◽  
Vol 998-999 ◽  
pp. 1425-1428 ◽  
Author(s):  
Wen Ya Mei ◽  
Teng Hong Hui
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Surface Area ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
X Ray ◽  
Remarkable Increase ◽  
Efficient Adsorbent ◽  
Scanning Electron

Brewing spent diatomite (BSDT), a beer industrial by-product, was regenerated with calcination. The characteristics of regenerated BSDT were detected by X-ray diffraction, X-ray fluorescence, Fourier-transform infrared, and scanning electron microscopy. The results showed that the mineralization of the surface adsorbate and the remarkable increase in the Si-OH decreased the pHpzc value from 7.6 to 5.2 and increased the surface area from 36 m2/g to 52 m2/g after calcination at 800 °C. The results show that the regenerated BSTD could be employed as an efficient adsorbent for the recycling of BSDT.

Synthesis of Triethynylborazine-Polyhydromethylsiloxane Copolymers and its Ceramization

2013 ◽  
Vol 774-776 ◽  
pp. 629-633
Author(s):  
Ji Feng Jiang ◽  
Kang Kang Guo ◽  
Ya Ping Zhu ◽  
Fan Wang ◽  
Hui Min Qi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Nuclear Magnetic Resonance ◽  
Fourier Transform ◽  
Thermogravimetric Analysis ◽  
X Ray Diffraction ◽  
Hydrosilylation Reaction ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

Triethynylborazine-polyhydromethylsiloxane copolymers (TEB-PHMSs) were prepared through hydrosilylation reaction between -C≡CH attached to boron and ≡Si-H. The structures of TEB-PHMSs were characterized by Fourier transform Infrared (FT-IR) and Nuclear Magnetic Resonance (NMR) spectroscopy. Their cure behavior were examined by Differential Scanning Calorimeter (DSC) and FT-IR, and then thermostability and ceramization of cured TEB-PHMS were investigated by Thermogravimetric analysis (TGA), pyrolysis-GC-MS, X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). The results indicated that TEB-PHMSs could be cured and converted into an outstanding thermostable SiBCN ceramics.

Sign in / Sign up

Export Citation Format

Share Document