Characterization of Pacemaker Electrode Surfaces Utilizing Scanning Electron Microscopy (SEM) and In-Vitro Electrochemical Analysis

1999 ◽  
Vol 5 (S2) ◽  
pp. 402-403
Author(s):  
Scott Brabec ◽  
Bill Schindeldecker ◽  
Ken Brennen ◽  
Sue Okerstrom ◽  
Ky Pham
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Impedance Spectrum ◽  
Sample Surface ◽  
Electrochemical Analysis ◽  
Platinum Black ◽  
Conductive Surface ◽  
Scanning Electron

The efficiency of implantable electrodes for cardiac pacing depends on the ratio of the conductive surface area to the geometric area of the interface with excitable tissue. New models of heart pacers require reduction of post-pulse polarization, i.e. the potential left on the electrode / tissue interface after a pacemaker pulse. Increasing the conductive surface area is an effective method to this end. Microscopy provides an important tool in elucidating the role of surface structure in electrode performance.Three different surface textures were characterized on a 90% platinum(Pt)/10% iridium (Ir) polished electrode substrate of roughly 5 mm2 geometric surface area. These consisted of the polished substrate itself, a thin film of textured platinum in the 1-3 micron size range, and a sub-micron platinum black coating. Sample surface effects were characterized via scanning electron microscopy (SEM), in-vitro electrical impedance spectrum analysis, and polarization after-potential measurements.

Scanning Electron Microscopy of Staphylococcus Epidermidis Adherence to Continuous Ambulatory Peritoneal Dialysis Catheters

1985 ◽  
Vol 43 ◽  
pp. 520-521
Author(s):  
William J. Lamoreaux ◽  
David L. Smalley ◽  
Larry M. Baddour ◽  
Alfred P. Kraus
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Peritoneal Dialysis ◽  
Continuous Ambulatory Peritoneal Dialysis ◽  
Staphylococcus Epidermidis ◽  
Sterile Saline ◽  
Intravascular Devices ◽  
Capd Patient ◽  
Scanning Electron

Infections associated with the use of intravascular devices have been documented and have been reported to be related to duration of catheter usage. Recently, Eaton et al. reported that Staphylococcus epidermidis may attach to silastic catheters used in continuous ambulatory peritoneal dialysis (CAPD) treatment. The following study presents findings using scanning electron microscopy (SEM) of S. epidermidis adherence to silastic catheters in an in vitro model. In addition, sections of polyvinyl chloride (PVC) dialysis bags were also evaluated by SEM.The S. epidermidis strain RP62A which had been obtained in a previous outbreak of coagulase-negative staphylococcal sepsis at local hospitals was used in these experiments. The strain produced surface slime on exposure to glucose, whereas a nonadherent variant RP62A-NA, which was also used in these studies, failed to produce slime. Strains were grown overnight on blood agar plates at 37°C, harvested from the surface and resuspended in sterile saline (0.85%), centrifuged (3,000 rpm for 10 minutes) and then washed twice in 0.1 M phosphate-buffered saline at pH 7.0. Organisms were resuspended at a concentration of ca. 106 CFU/ml in: a) sterile unused dianeal at 4.25% dextrose, b) sterile unused dianeal at 1.5% dextrose, c) sterile used dialysate previously containing 4.25% dextrose taken from a CAPD patient, and d) sterile used dialysate previously containing 1.5% dextrose taken from a CAPD patient.

The Mesothelial Cell as a Non-Thrombogenic Surface

1984 ◽  
Vol 52 (02) ◽  
pp. 102-104 ◽  
Author(s):  
L J Nicholson ◽  
J M F Clarke ◽  
R M Pittilo ◽  
S J Machin ◽  
N Woolf
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Blood Flow ◽  
Cell Surface ◽  
Mesothelial Cell ◽  
Mesothelial Cells ◽  
Plastic Film ◽  
In Vitro System ◽  
Scanning Electron

SummaryA technique for harvesting mesothelial cells is described. This entails collagenase digestion of omentum after which the cells can be cultured. The technique has been developed using the rat, but has also been successfully applied to human tissue. Cultured rat mesothelial cells obtained in this way have been examined by scanning electron microscopy. Rat mesothelial cells grown on plastic film have been exposed to blood in an in vitro system using a Baumgartner chamber and have been demonstrated to support blood flow. No adhering platelets were observed on the mesothelial cell surface. Fibroblasts similarily exposed to blood as a control were washed off the plastic.

Study of Phosphocalcic Glasses from SiO2-CaO-P2O5 System with and Without Silver II. The bioactivity analysis by FTIR, SEM methods and microbiological study of silver-doped glasses

2017 ◽  
Vol 68 (6) ◽  
pp. 1188-1192
Author(s):  
Daniela Avram ◽  
Nicolae Angelescu ◽  
Dan Nicolae Ungureanu ◽  
Ionica Ionita ◽  
Iulian Bancuta ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Body Fluid ◽  
Pathogenic Bacteria ◽  
De Novo ◽  
Microbiological Examination ◽  
Doped Glasses ◽  
P2o5 System ◽  
Scanning Electron

The study in vitro of the glass powders bioactivity was performed by soaking them in simulated body fluid for 3 to 21 days at a temperature of 37�C and pH = 7.20. The synthesis de novo of hydroxyapatite, post soaking was confirmed by Fourier Transform Infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The study of the antimicrobial activity was performed by microbiological examination on two strains of pathogenic bacteria involved in postoperative nosocomial infections.

scholarly journals Synthesis and Evaluation of AlgNa-g-poly(QCL-co-HEMA) Hydrogels as Platform for Chondrocyte Proliferation and Controlled Release of Betamethasone

2021 ◽  
Vol 22 (11) ◽  
pp. 5730
Author(s):  
Jomarien García-Couce ◽  
Marioly Vernhes ◽  
Nancy Bada ◽  
Lissette Agüero ◽  
Oscar Valdés ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Controlled Release ◽  
Biomedical Applications ◽  
Release Kinetics ◽  
Cell Types ◽  
Tissue Engineering Scaffolds ◽  
Almost All ◽  
Scanning Electron

Hydrogels obtained from combining different polymers are an interesting strategy for developing controlled release system platforms and tissue engineering scaffolds. In this study, the applicability of sodium alginate-g-(QCL-co-HEMA) hydrogels for these biomedical applications was evaluated. Hydrogels were synthesized by free-radical polymerization using a different concentration of the components. The hydrogels were characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, and a swelling degree. Betamethasone release as well as the in vitro cytocompatibility with chondrocytes and fibroblast cells were also evaluated. Scanning electron microscopy confirmed the porous surface morphology of the hydrogels in all cases. The swelling percent was determined at a different pH and was observed to be pH-sensitive. The controlled release behavior of betamethasone from the matrices was investigated in PBS media (pH = 7.4) and the drug was released in a controlled manner for up to 8 h. Human chondrocytes and fibroblasts were cultured on the hydrogels. The MTS assay showed that almost all hydrogels are cytocompatibles and an increase of proliferation in both cell types after one week of incubation was observed by the Live/Dead® assay. These results demonstrate that these hydrogels are attractive materials for pharmaceutical and biomedical applications due to their characteristics, their release kinetics, and biocompatibility.

Bipolar Mesoderm Cells in vitro Examined by Scanning Electron Microscopy

1987 ◽  
Vol 16 (1) ◽  
pp. 48-52
Author(s):  
C. A. Chamorro ◽  
P. de Paz ◽  
J. G. Fernandez ◽  
M. Fernandez ◽  
J. M. Villar
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Scanning Electron

Distribution of diaphragmatic lymphatic stomata

1991 ◽  
Vol 70 (4) ◽  
pp. 1544-1549 ◽  
Author(s):  
D. Negrini ◽  
S. Mukenge ◽  
M. Del Fabbro ◽  
C. Gonano ◽  
G. Miserocchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Area ◽  
Frequency Distribution ◽  
Maximum Diameter ◽  
Minimum Diameter ◽  
Average Value ◽  
Scanning Electron

In seven anesthetized rabbits we measured the size, shape, and density of lymphatic stomata on the peritoneal and pleural sides of the diaphragm. The diaphragm was fixed in situ and processed for scanning electron microscopy. Results are from 2,902 peritoneal and 3,086 pleural fields (each 1,620 microns 2) randomly chosen from the various specimens. Stomata were seen in 9% of the fields examined, and in 30% of the cases they appeared grouped in clusters with 2-14 stomata/field. Stoma density was 250 +/- 242 and 72 +/- 57 (SD) stomata/mm2 on peritoneal and pleural sides, respectively, and it was similar over the muscular and tendinous portion of the two surfaces. The maximum diameter ranged from less than 1 to approximately 30 microns, with an average value of 1.2 +/- 3.1 micron. The ratio of the maximum to the minimum diameter and the surface area averaged 2 +/- 1.4 and 0.7 +/- 2.4 micron 2, respectively. The maximum and minimum diameter and surface area values followed a lognormal frequency distribution, suggesting that stomata geometry is affected by diaphragmatic tension.

Sign in / Sign up

Export Citation Format

Share Document