scholarly journals Tailor-made preparation of Co–C, Co–B, and Co catalytic thin films using magnetron sputtering: insights into structure–composition and activation effects for catalyzed NaBH4 hydrolysis

RSC Advances ◽  
2016 ◽  
Vol 6 (110) ◽  
pp. 108611-108620 ◽  
Author(s):  
M. Paladini ◽  
V. Godinho ◽  
G. M. Arzac ◽  
M. C. Jiménez de Haro ◽  
A. M. Beltrán ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
Sodium Borohydride ◽  
Thin Film Catalysts

The magnetron sputtering (MS) methodology is a powerful tool for tailor-made fabrication of Co-based thin film catalysts with controlled microstructures and compositions for sodium borohydride (SBH) hydrolysis.

Synthesis of Nanocomposite thin film Ti/Al Multilayers and Ti-Aluminides

1996 ◽  
Vol 457 ◽  
Author(s):  
R. Banerjee ◽  
X. D. Zhang ◽  
S. A. Dregia ◽  
H. L. Fraser
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
Layer Thickness ◽  
Thermodynamic Model ◽  
Interfacial Reactions ◽  
Experimental Results ◽  
Structural Transitions ◽  
Nanocomposite Thin Film ◽  
Multilayered Thin Films

ABSTRACTNanocomposite Ti/Al multilayered thin films have been deposited by magnetron sputtering. These multilayers exhibit interesting structural transitions on reducing the layer thickness of both Ti and Al. Ti transforms from its bulk stable hep structure to fee and Al transforms from fee to hep. The effect of ratio of Ti layer thickness to Al layer thickness on the structural transitions has been investigated for a constant bilayer periodicity of 10 nm by considering three different multilayers: 7.5 nm Ti / 2.5 nm Al, 5 nm Ti / 5 nm Al and 2.5 nm Ti / 7.5 nm Al. The experimental results have been qualitatively explained on the basis of a thermodynamic model. Preliminary experimental results of interfacial reactions in Ti/Al bilayers resulting in the formation of Ti-aluminides are also presented in the paper.

High Performance Metal Surface Coating Using Ta2O5 Thin Film Prepared by D.C. Magnetron Sputtering

2014 ◽  
Vol 979 ◽  
pp. 240-243
Author(s):  
Narathon Khemasiri ◽  
Chanunthorn Chananonnawathorn ◽  
Mati Horprathum ◽  
Pitak Eiamchai ◽  
Pongpan Chindaudom ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
Film Thickness ◽  
Metal Surface ◽  
High Performance ◽  
Grazing Incidence ◽  
Surface Finishing ◽  
Afm Micrographs ◽  
Protective Performance

Tantalum oxide (Ta2O5) thin films were deposited as the protective layers for the metal surface finishing by the DC reactive magnetron sputtering system. The effect of the Ta2O5 film thickness, ranging from 25 nm to 200 nm, on the physical properties and the anti-corrosive performance were investigated. The grazing-incidence X-ray diffraction (GIXRD) and the atomic force microscopy (AFM) were used to examine the crystal structures and the surface topologies of the prepared films, respectively. The XRD results showed that the Ta2O5 thin films were all amorphous. The AFM micrographs demonstrated the film morphology with quite smooth surface features. The surface roughness tended to be rough when the film thickness was increased. To examine the protective performance of the films, the poteniostat and galvanometer was utilized to examine the electrochemical activities with the 1M NaCl as the corrosive electrolyte. The results from the I-V polarization curves (Tafel slope) indicated that, with the Ta2O5 thin film, the current density was significantly reduced by 3 orders of magnitude when compared with the blank sample. Such results were observed because of fully encapsulated surface of the samples were covered with the sputtered Ta2O5 thin films. The study also showed that the Ta2O5 thin film deposited at 50 nm yielded the most extreme protective performance. The Ta2O5 thin films therefore could be optimized for the smallest film thickness for highly potential role in the protective performance of the metal surface finishing products.

Study on preparing PLT(28) thin film and its electro-optic effect

1998 ◽  
Vol 13 (5) ◽  
pp. 1266-1270 ◽  
Author(s):  
Ai-Li Ding ◽  
Wei-Gen Luo ◽  
P. S. Qiu ◽  
J. W. Feng ◽  
R. T. Zhang
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
Faraday Effect ◽  
The Other ◽  
Ceramic Powders ◽  
Glass Substrates ◽  
Annealing Conditions ◽  
Electro Optic

PLT(28) thin films deposited on glass substrates were studied by two sputtering processes. One is an in situ magnetron sputtering and the other is a low-temperature magnetron sputtering. The sintered PLT ceramic powders are used as a sputtering target for both processes. The influences of sputtering and annealing conditions on structure and crystallinity of the films were investigated. The electro-optic (E-O) properties of PLT(28) thin films prepared by the two processes were determined by a technique according to Faraday effect. The researches showed the E-O properties were strongly affected by the sputtering process. The film with larger grains exhibits stronger E-O effect. The quadratic E-O coefficient of PLT(28) thin film varies in the range of 0.1 × 10−16 to 1.0 × 10−16 (m/v)2.

PROPERTIES OF ALL-SOLID-STATE LITHIUM-ION RECHARGEABLE BATTERIES DEPOSITED BY RF MAGNETRON SPUTTERING

2013 ◽  
Vol 27 (22) ◽  
pp. 1350156 ◽  
Author(s):  
R. J. ZHU ◽  
Y. REN ◽  
L. Q. GENG ◽  
T. CHEN ◽  
L. X. LI ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Solid State ◽  
Magnetron Sputtering ◽  
Coulombic Efficiency ◽  
Electronic Conductivity ◽  
Lithium Ion ◽  
Rf Magnetron Sputtering ◽  
Rechargeable Batteries ◽  
Voltage Range

Amorphous V 2 O 5, LiPON and Li 2 Mn 2 O 4 thin films were fabricated by RF magnetron sputtering methods and the morphology of thin films were characterized by scanning electron microscopy. Then with these three materials deposited as the anode, solid electrolyte, cathode, and vanadium as current collector, a rocking-chair type of all-solid-state thin-film-type Lithium-ion rechargeable battery was prepared by using the same sputtering parameters on stainless steel substrates. Electrochemical studies show that the thin film battery has a good charge–discharge characteristic in the voltage range of 0.3–3.5 V, and after 30 cycles the cell performance turned to become stabilized with the charge capacity of 9 μAh/cm2, and capacity loss of single-cycle of about 0.2%. At the same time, due to electronic conductivity of the electrolyte film, self-discharge may exist, resulting in approximately 96.6% Coulombic efficiency.

scholarly journals Fabrication and Testing of All-solid-state Nanoscale Lithium Batteries Using LiPON for Electrolytes

2018 ◽  
Vol 53 ◽  
pp. 01008
Author(s):  
Feihu Tan ◽  
XiaoPing Liang ◽  
Feng Wei ◽  
Jun Du
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Solid State ◽  
Magnetron Sputtering ◽  
Specific Capacity ◽  
Rf Magnetron Sputtering ◽  
Open Circuit ◽  
Working Pressure ◽  
Thin Film Battery ◽  
A Current

The amorphous LiPON thin film was obtained by using the crystalline Li3PO4 target and the RF magnetron sputtering method at a N2 working pressure of 1 Pa. and then the morphology and composition of LiPON thin films are analysed by SEM and EDS. SEM shows that the film was compact and smooth, while EDS shows that the content of N in LiPON thin film was about 17.47%. The electrochemical properties of Pt/LiPON/Pt were analysed by EIS, and the ionic conductivity of LiPON thin films was 3.8×10-7 S/cm. By using the hard mask in the magnetron sputtering process, the all-solid-state thin film battery with Si/Ti/Pt/LiCoO2/LiPON/Li4Ti5O12/Pt structure was prepared, and its electrical properties were studied. As for this thin film battery, the open circuit voltage was 1.9 V and the first discharge specific capacity was 34.7 μAh/cm2·μm at a current density of 5 μA/cm-2, indicating that is promising in all-solidstate thin film batteries.

scholarly journals Microfluidic electrochemical cell for in situ structural characterization of amorphous thin-film catalysts using high-energy X-ray scattering

2019 ◽  
Vol 26 (5) ◽  
pp. 1600-1611 ◽  
Author(s):  
Gihan Kwon ◽  
Yeong-Ho Cho ◽  
Ki-Bum Kim ◽  
Jonathan D. Emery ◽  
In Soo Kim ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Electrochemical Cell ◽  
Porous Electrode ◽  
High Energy ◽  
Porous Electrodes ◽  
X Ray ◽  
Pdf Analysis ◽  
Thin Film Catalysts

Porous, high-surface-area electrode architectures are described that allow structural characterization of interfacial amorphous thin films with high spatial resolution under device-relevant functional electrochemical conditions using high-energy X-ray (>50 keV) scattering and pair distribution function (PDF) analysis. Porous electrodes were fabricated from glass-capillary array membranes coated with conformal transparent conductive oxide layers, consisting of either a 40 nm–50 nm crystalline indium tin oxide or a 100 nm–150 nm-thick amorphous indium zinc oxide deposited by atomic layer deposition. These porous electrodes solve the problem of insufficient interaction volumes for catalyst thin films in two-dimensional working electrode designs and provide sufficiently low scattering backgrounds to enable high-resolution signal collection from interfacial thin-film catalysts. For example, PDF measurements were readily obtained with 0.2 Å spatial resolution for amorphous cobalt oxide films with thicknesses down to 60 nm when deposited on a porous electrode with 40 µm-diameter pores. This level of resolution resolves the cobaltate domain size and structure, the presence of defect sites assigned to the domain edges, and the changes in fine structure upon redox state change that are relevant to quantitative structure–function modeling. The results suggest the opportunity to leverage the porous, electrode architectures for PDF analysis of nanometre-scale surface-supported molecular catalysts. In addition, a compact 3D-printed electrochemical cell in a three-electrode configuration is described which is designed to allow for simultaneous X-ray transmission and electrolyte flow through the porous working electrode.

Enhanced UV Photon-response of Tin Nano Cluster Loaded- laser Irradiated ZnO Thin film detector

2011 ◽  
Vol 1288 ◽  
Author(s):  
Rashmi Menon ◽  
K. Sreenivas ◽  
Vinay Gupta
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Magnetron Sputtering ◽  
Surface States ◽  
Response Speed ◽  
Rf Magnetron Sputtering ◽  
Fast Response ◽  
Zno Thin Films ◽  
Zno Thin Film ◽  
Photo Response

ABSTRACTZinc Oxide (ZnO), II-VI compound semiconductor, is a promising material for ultraviolet (UV) photon sensor applications due to its attractive properties such as good photoconductivity, ease processing at low temperatures and excellent radiation hardness. The rf magnetron sputtering is a suitable deposition technique due to better control over stoichiometry and deposition of uniform film. Studies have shown that the presence of surface defects in ZnO and subsequently their passivation are crucial for enhanced photo-response characteristics, and to obtain the fast response speed. Worldwide efforts are continuing to develop good quality ZnO thin films with novel design structures for realization of an efficient UV photon sensor. In the present work, UV photon sensor is fabricated using a ZnO thin films deposited by rf magnetron sputtering on the corning glass substrate. Photo-response, (Ion/Ioff) of as-grown ZnO film of thickness 100 nm is found to be 3×103 with response time of 90 ms for UV intensity of 140 μW/cm2 (λ = 365 nm). With irradiation on ZnO thin film by pulsed Nd:YAG laser (forth harmonics 266 nm), the sensitivity of the UV sensor is found to enhance. The photo-response increases after laser irradiation to 4x104 with a fast response speed of 35 ms and attributed to the change in surface states and the native defects in the ZnO thin film. Further, enhancement in the ultraviolet (UV) photo-response (8×104) of detector was observed after integrating the nano-scale islands of Sn metal on the surface of laser irradiated ZnO thin film.

Structural, Morphological and Adhesion Properties of Cofeb Thin Films Deposited by DC Magnetron Sputtering

2013 ◽  
Vol 802 ◽  
pp. 47-52
Author(s):  
Chuleerat Ibuki ◽  
Rachasak Sakdanuphab
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Grain Size ◽  
Magnetron Sputtering ◽  
Crystalline Structure ◽  
Glass Substrate ◽  
Intrinsic Stress ◽  
Dc Magnetron Sputtering ◽  
Adhesion Properties ◽  
Sputtering Power

In this work the effects of amorphous (glass) and crystalline (Si) substrates on the structural, morphological and adhesion properties of CoFeB thin film deposited by DC Magnetron sputtering were investigated. It was found that the structure of a substrate affects to crystal formation, surface morphology and adhesion of CoFeB thin films. The X-Ray diffraction patterns reveal that as-deposited CoFeB thin film at low sputtering power was amorphous and would become crystal when the power increased. The increase in crystalline structure of CoFeB thin film is attributed to the crystalline substrate and the increase of kinetic energy of sputtering atoms. Atomic Force Microscopy images of CoFeB thin film clearly show that the roughness, grain size, and uniformity correlate to the sputtering power and the structure of substrate. The CoFeB thin film on glass substrate shows a smooth surface and a small grain size whereas the CoFeB thin film on Si substrate shows a rough surface and a slightly increases of grain size. Sticky Tape Test on CoFeB thin film deposited on glass substrate indicates the adhesion failure with a high sputtering power. The results suggest that the crystalline structure of substrate affects to the atomic bonding and the sputtering power affects to intrinsic stress of CoFeB thin film.

ELECTRICAL AND OPTICAL PROPERTIES OF ZnO THIN FILMS PREPARED BY R.F. MAGNETRON SPUTTERING

2011 ◽  
Vol 25 (20) ◽  
pp. 2741-2749 ◽  
Author(s):  
J. C. ZHOU ◽  
L. LI ◽  
L. Y. RONG ◽  
B. X. ZHAO ◽  
Y. M. CHEN ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Optical Properties ◽  
Magnetron Sputtering ◽  
Oxide Thin Film ◽  
Zno Thin Films ◽  
Zno Thin Film ◽  
Electrical And Optical Properties ◽  
Axis Orientation ◽  
Sputtering Power

High transparency and conductivity of transparent conducting oxide thin film are very important for improving the efficiency of solar cells. ZnO thin film is a better candidate for transparent conductive layer of solar cell. N-type ZnO thin films were prepared by radio-frequency magnetron sputtering on glass substrates. ZnO thin films underwent annealing treatment after deposition. The influence of the sputtering power on the surface morphology, the electrical and optical properties were studied by AFM, XRD, UV2450 and HMS-3000. The experimental results indicate that the crystal quality of ZnO thin film is improved and all films show higher c-axis orientation with increasing sputtering power from 50 to 125 W. The average transparency of ZnO thin films is higher than 90% in the range of 400–900 nm between the sputtering power of 50–100 W. After the rapid thermal annealing at 550°C for 300 s under N2 ambient, the minimum resistivity reach to 10-2Ω⋅ cm .

Sign in / Sign up

Export Citation Format

Share Document