Ti2P monolayer as a high performance 2-D electrode material for ion batteries

2020 ◽  
Vol 22 (33) ◽  
pp. 18480-18487
Author(s):  
Zishuang Cheng ◽  
Xiaoming Zhang ◽  
Hui Zhang ◽  
Heyan Liu ◽  
Xiao Yu ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Storage Capacity ◽  
Ion Diffusion ◽  
Battery Electrode

Electrical conductivity, storage capacity and ion diffusion ability are three crucial parameters for battery electrode materials.

3D hierarchical porous N-doped carbon quantum dots/vanadium nitride hybrid microflowers as a superior electrode material toward high-performance asymmetric capacitive deionization

2021 ◽  
Author(s):  
Jingxuan Zhao ◽  
Zhibo Zhao ◽  
Yang Sun ◽  
Xiangdong Ma ◽  
Meidan Ye ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Electrode Material ◽  
High Performance ◽  
Carbon Nanomaterials ◽  
Electrode Materials ◽  
Carbon Quantum Dots ◽  
Vanadium Nitride ◽  
Capacitive Deionization ◽  
Hierarchical Porous

Taking into account of time-confusing preparation processing and unsatisfied desalination capacity of carbon nanomaterials, exploring efficient electrode materials remains a great challenge for practical capacitive deionization (CDI) application. In this...

scholarly journals Easy approach to synthesize N/P/K co-doped porous carbon microfibers from cane molasses as a high performance supercapacitor electrode material

RSC Advances ◽  
2014 ◽  
Vol 4 (66) ◽  
pp. 34739-34750 ◽  
Author(s):  
Alfin Kurniawan ◽  
L. K. Ong ◽  
Fredi Kurniawan ◽  
C. X. Lin ◽  
Felycia E. Soetaredjo ◽  
...  
Keyword(s):  
Electrode Material ◽  
Porous Carbon ◽  
High Performance ◽  
Electrode Materials ◽  
Supercapacitor Electrode ◽  
Cane Molasses ◽  
Electrochemical Application ◽  
Carbon Microfibers ◽  
First Time ◽  
Co Doped

For the first time, porous carbon microfibers co-doped with N/P/K were synthesized from cane molasses by combination of electrospinning and carbonization techniques and its electrochemical application to electrode materials for supercapacitors was investigated.

scholarly journals Ce-Doped PANI/Fe3O4 Nanocomposites: Electrode Materials for Supercapattery

2021 ◽  
Vol 3 ◽  
Author(s):  
Subash Pandey ◽  
Shova Neupane ◽  
Dipak Kumar Gupta ◽  
Anju Kumari Das ◽  
Nabin Karki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Specific Capacity ◽  
Maximum Energy ◽  
Potential Range ◽  
X Ray Diffraction ◽  
Active Electrode ◽  
Transmission Electron

In this study, we report on a combined approach to preparing an active electrode material for supercapattery application by making nanocomposites of Polyaniline/Cerium (PANI/Ce) with different weight percentages of magnetite (Fe3O4). Fourier-transform infrared spectroscopy (FTIR) and x-ray diffraction (XRD) analyses supported the interaction of PANI with Ce and the formation of the successful nanocomposite with magnetite nanoparticles. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses showed the uniform and porous morphology of the composites. Cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) were used to test the supercapattery behavior of the nanocomposite electrodes in 1.0 M H2SO4. It was found that the supercapattery electrode of PANI/Ce+7 wt.% Fe3O4 exhibited a specific capacity of 171 mAhg−1 in the potential range of −0.2 to 1.0 V at the current density of 2.5 Ag−1. Moreover, PANI/Ce+7 wt.% Fe3O4 revealed a power density of 376.6 Wkg−1 along with a maximum energy density of 25.4 Whkg−1 at 2.5 Ag−1. Further, the cyclic stability of PANI/Ce+7 wt.% Fe3O4 was found to be 96.0% after 5,000 cycles. The obtained results suggested that the PANI/Ce+Fe3O4 nanocomposite could be a promising electrode material candidate for high-performance supercapattery applications.

Nitrogen-Enriched Reduced Graphene Oxide for High Performance Supercapacitor Electrode

2020 ◽  
Vol 20 (8) ◽  
pp. 4854-4859 ◽  
Author(s):  
Lei Chen ◽  
Xu Chen ◽  
Yaqiong Wen ◽  
Bixia Wang ◽  
Yangchen Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Specific Capacitance ◽  
Reduced Graphene Oxide ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Electrochemical Impedance ◽  
Oxide Electrode ◽  
Reduced Graphene

Nitrogen-enriched reduced graphene oxide electrode material can be successfully prepared through a simple hydrothermal method. The morphology and microstructure of ready to use electrode material is measured by field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). Physical characterizations revealed that nitrogen-enriched reduced graphene oxide electrode material possessed high specific surface area of 429.6 m2 · g−1, resulting in high utilization of electrode materials with electrolyte. Electrochemical performance of nitrogen-enriched reduced graphene oxide electrode was also investigated by cyclic voltammetry (CV), galvanostatic charge/discharge measurements and electrochemical impedance spectroscopy (EIS) in aqueous in 6 M KOH with a three-electrode system, which displayed a high specific capacitance about 223.5 F · g−1 at 1 mV · s−1. More importantly, nitrogenenriched reduced graphene oxide electrode exhibited outstanding stability with 100% coulombic efficiency and with no specific capacitance loss under 2 A · g−1 after 10000 cycles. The supercapacitive behaviors indicated that nitrogen-enriched reduced graphene oxide can be a used as a promising electrode for high-performance super-capacitors.

Mixed-metallic MOF based electrode materials for high performance hybrid supercapacitors

2017 ◽  
Vol 5 (3) ◽  
pp. 1094-1102 ◽  
Author(s):  
Yang Jiao ◽  
Jian Pei ◽  
Dahong Chen ◽  
Chunshuang Yan ◽  
Yongyuan Hu ◽  
...  
Keyword(s):  
Energy Storage ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Metal Organic Frameworks ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Hybrid Supercapacitors ◽  
Metal Organic

Metal–organic frameworks (MOFs) have obtained increasing attention as a kind of novel electrode material for energy storage devices.

scholarly journals Discharged Na5V12O32 Nanowire Arrays Coated with Cu-Cu2O for High Performance Lithium-Ion Batteries

2021 ◽  
Author(s):  
Guangjie Yang ◽  
Mengmeng Cui ◽  
Tao Han ◽  
dong fang ◽  
Xingjie Lu ◽  
...  
Keyword(s):  
Lithium Ion Battery ◽  
High Performance ◽  
Composite Electrode ◽  
Electrode Materials ◽  
Coating Layer ◽  
Lithium Ion ◽  
Nanowire Arrays ◽  
Battery Electrode ◽  
Cu2o Nanoparticles ◽  
Enhanced Electrochemical Performance

Abstract Sodium vanadate have been widely used as a lithium-ion battery anode. However, its further application is restricted by the capacity attenuation during cycles because of its easy solubility in electrolyte, huge structural change, and low conductivity. Here, a lithium-ion battery electrode based on Cu-Cu2O coated Na5V12O32 nanowire arrays using a predischarge-electrodeposition method is freported. Remarkably, in the Cu-Cu2O@Na5V12O32 electrode, the Na5V12O32 nanowires function as the skeleton, and Cu-Cu2O nanoparticles function as the coating layer. At a specific current of 50 mA g-1, the composite electrode exhibits discharge and charge capacity of 837 and 821 mAh g-1 after 80 cycles, respectively, which is much higher than that of the Na5V12O32 nanowires electrode. This research provides a new pathway to explore electrode materials with enhanced electrochemical performance.

scholarly journals A Cryogenic Milling Method to Fabricate Nanostructured Anodes

2020 ◽  
Author(s):  
Qizhang Yan ◽  
Shu-Ting Ko ◽  
Yumin Zhao ◽  
Grace Whang ◽  
Andrew Dawson ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Performance ◽  
Electrode Materials ◽  
Coulombic Efficiency ◽  
Graphite Powder ◽  
Cryogenic Milling ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Battery Electrode ◽  
Milling Method

Cryogenic milling was demonstrated as a new and facile method to fabricate nanostructured battery electrode materials. SnSb anode material with 1.2 wt% graphite was selected as a model system to demonstrate the feasibility and benefits of this method. Ball milling at a cryogenic temperature can suppress cold welding, exfoliate bulk graphite powder into nanoplatelets, and evenly disperse them between the grains. Aberration-corrected scanning transmission electron microscopy and post-cycling scanning electron microscopy showed refined grain sizes and well-dispersed carbon nanoplatelets, which can stabilize the nanostructure and alleviate volume expansion and cracking upon cycling. The cryomilled SnSb-C composite anode showed a reversible volumetric capacity of 1842 Ah/L, average coulombic efficiency of 99.6 ± 0.3%, and capacity retention of 90% over 100 cycles. The cryomilled sample showed improved electrochemical performance compared to the conventional ball milled specimen. This new method of cryogenic milling can produce various other high-performance nanostructured electrode materials.

scholarly journals A Cryogenic Milling Method to Fabricate Nanostructured Anodes

2020 ◽  
Author(s):  
Qizhang Yan ◽  
Shu-Ting Ko ◽  
Yumin Zhao ◽  
Grace Whang ◽  
Andrew Dawson ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Performance ◽  
Electrode Materials ◽  
Coulombic Efficiency ◽  
Graphite Powder ◽  
Cryogenic Milling ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Battery Electrode ◽  
Milling Method

Cryogenic milling was demonstrated as a new and facile method to fabricate nanostructured battery electrode materials. SnSb anode material with 1.2 wt% graphite was selected as a model system to demonstrate the feasibility and benefits of this method. Ball milling at a cryogenic temperature can suppress cold welding, exfoliate bulk graphite powder into nanoplatelets, and evenly disperse them between the grains. Aberration-corrected scanning transmission electron microscopy and post-cycling scanning electron microscopy showed refined grain sizes and well-dispersed carbon nanoplatelets, which can stabilize the nanostructure and alleviate volume expansion and cracking upon cycling. The cryomilled SnSb-C composite anode showed a reversible volumetric capacity of 1842 Ah/L, average coulombic efficiency of 99.6 ± 0.3%, and capacity retention of 90% over 100 cycles. The cryomilled sample showed improved electrochemical performance compared to the conventional ball milled specimen. This new method of cryogenic milling can produce various other high-performance nanostructured electrode materials.

Highly conductive Ni(OH)2 nano-sheets wrapped CuCo2S4 nano-tube electrode with a core-shell structure toward high performance supercapacitor

2021 ◽  
Author(s):  
Yinan Yuan ◽  
Henan Jia ◽  
Zhaoyuan Liu ◽  
Lidong Wang ◽  
J. Sheng ◽  
...  
Keyword(s):  
Electrode Material ◽  
Shell Structure ◽  
High Performance ◽  
Electrode Materials ◽  
Core Shell ◽  
Electrochemical Performances ◽  
Tube Electrode ◽  
Optimum Selection ◽  
Core Shell Structure ◽  
Selection Of

The design of microstructures and the optimum selection of electrode materials have substantial effects on the electrochemical performances for supercapacitors. A core-shell structured CuCo2S4@Ni(OH)2 electrode material was designed, in which...

Sign in / Sign up

Export Citation Format

Share Document