Chlorine management of carbon counter electrode for high performance printable perovskite solar cells

2021 ◽  
Author(s):  
Xinmiao Chen ◽  
Lei Lu ◽  
Dawei Gu ◽  
Xiaoyan Zhang ◽  
Yu He ◽  
...  
Keyword(s):  
Solar Cell ◽  
Production Process ◽  
Mesoporous Carbon ◽  
High Performance ◽  
Counter Electrode ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Simple Production ◽  
Excellent Stability

The printable HTM-free (HTM=hole transport materials) mesoporous carbon-based perovskite solar cell (C-PSC) is one of the most promising technologies, because of its simple production process, lost-cost and excellent stability. In...

scholarly journals High-performance hole conductor-free perovskite solar cell using a carbon nanotube counter electrode

RSC Advances ◽  
2020 ◽  
Vol 10 (59) ◽  
pp. 35831-35839 ◽  
Author(s):  
Mustafa K. A. Mohammed
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Carbon Nanotube ◽  
High Performance ◽  
Counter Electrode ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Manufacturing Cost ◽  
Long Term Stability

Carbon-based perovskite solar cells (C-PSCs) are the most promising photovoltaic (PV) due to their low material and manufacturing cost and superior long-term stability.

scholarly journals Crystal Engineering Approach for Fabrication of Inverted Perovskite Solar Cell in Ambient Conditions

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1751
Author(s):  
Inga Ermanova ◽  
Narges Yaghoobi Nia ◽  
Enrico Lamanna ◽  
Elisabetta Di Bartolomeo ◽  
Evgeny Kolesnikov ◽  
...  
Keyword(s):  
Solar Cell ◽  
Crystal Engineering ◽  
High Performance ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Layer By Layer ◽  
Ambient Conditions ◽  
Sequential Method ◽  
Engineering Approach ◽  
Hole Transporting

In this paper, we demonstrate the high potentialities of pristine single-cation and mixed cation/anion perovskite solar cells (PSC) fabricated by sequential method deposition in p-i-n planar architecture (ITO/NiOX/Perovskite/PCBM/BCP/Ag) in ambient conditions. We applied the crystal engineering approach for perovskite deposition to control the quality and crystallinity of the light-harvesting film. The formation of a full converted and uniform perovskite absorber layer from poriferous pre-film on a planar hole transporting layer (HTL) is one of the crucial factors for the fabrication of high-performance PSCs. We show that the in-air sequential deposited MAPbI3-based PSCs on planar nickel oxide (NiOX) permitted to obtain a Power Conversion Efficiency (PCE) exceeding 14% while the (FA,MA,Cs)Pb(I,Br)3-based PSC achieved 15.6%. In this paper we also compared the influence of transporting layers on the cell performance by testing material depositions quantity and thickness (for hole transporting layer), and conditions of deposition processes (for electron transporting layer). Moreover, we optimized second step of perovskite deposition by varying the dipping time of substrates into the MA(I,Br) solution. We have shown that the layer by layer deposition of the NiOx is the key point to improve the efficiency for inverted perovskite solar cell out of glove-box using sequential deposition method, increasing the relative efficiency of +26% with respect to reference cells.

scholarly journals Comparative study of modeling of Perovskite solar cell with different HTM layers

2020 ◽  
Vol 7 ◽  
Keyword(s):  
Solar Cell ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Active Layer Thickness ◽  
As Doping ◽  
Working Temperature ◽  
Optimum Parameters

The efficiency of MASnI3 based solar cell with various hole transport material (HTM) layers including Spiro-OMeTAD, PEDOT:Pss, and Cu2O is studied. Zinc oxide (ZnO) layer is proposed as electron transport layer for lead-free CH3NH3SnI3 based Perovskite solar cells. The influence of device parameters such as doping level of the active layer, thickness of the CH3NH3SnI3 layer and working temperature is discussed. For optimum parameters of all three structures, efficiency of 24.17%, 24.50%, and 25.36% for PEDOT:Pss, Spiro-OMeTAD, and Cu2O, respectively is achieved. To study the optimized performance of this Perovskite solar cell, SCAPS-1D software is considered.

scholarly journals Alternative electrodes for HTMs and noble-metal-free perovskite solar cells: 2D MXenes electrodes

RSC Advances ◽  
2019 ◽  
Vol 9 (59) ◽  
pp. 34152-34157 ◽  
Author(s):  
Junmei Cao ◽  
Fanning Meng ◽  
Liguo Gao ◽  
Shuzhang Yang ◽  
Yeling Yan ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Noble Metal ◽  
Counter Electrode ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Metal Free ◽  
Conversion Efficiencies

The 2D Mxene material was successfully used as the counter electrode of the perovskite solar cell and achieved power conversion efficiencies of 13.84%.

scholarly journals Analysis of the role of hole transport layer materials to the performance of perovskite solar cell

2018 ◽  
Vol 67 ◽  
pp. 01021 ◽  
Author(s):  
Istighfari Dzikri ◽  
Michael Hariadi ◽  
Retno Wigajatri Purnamaningsih ◽  
Nji Raden Poespawati
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Short Circuit ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Open Circuit ◽  
Hole Transport ◽  
Transport Layer ◽  
Hole Transport Layer

Research in solar cells is needed to maximize Indonesia’s vast solar potential that can reach up to 207.898 MW with an average radiation of 4.8 kWh/m2/day. Organometallic perovskite solar cells (PSCs) have gained immense attention due to their rapid increase in efficiency and compatibility with low-cost fabrication methods. Understanding the role of hole transport layer is very important to obtain highly efficient PSCs. In this work, we studied the effect of Hole Transport Layer (HTL) to the performance of perovskite solar cell. The devices with HTL exhibit substantial increase in power conversion efficiency, open circuit voltage and short circuit current compared to the device without HTL. The best performing device is PSC with CuSCN as HTL layer, namely Voc of 0.24, Isc of 1.79 mA, 0.27 FF and efficiency of 0.09%.

Cost-effective thiophene-assisted novel dopant-free hole transport materials for efficient perovskite solar cell performance

2020 ◽  
Vol 4 (9) ◽  
pp. 4754-4767 ◽  
Author(s):  
M. SasiKumar ◽  
Gurulakshmi Maddala ◽  
Meenakshamma Ambapuram ◽  
Mahesh Subburu ◽  
Jayathirtha Rao Vaidya ◽  
...  
Keyword(s):  
Solar Cell ◽  
Short Circuit ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Cost Effective ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Solar Cell Performance ◽  
Free Hole ◽  
Circuit Density

Cost-effective, novel dopant-free hole transport material-assisted perovskite solar cells exhibit a champion short-circuit density 25.73 mA cm−2 and power conversion efficiency of 17.60%.

scholarly journals Numerical simulation of perovskite solar cell with different material as electron transport layer using SCAPS-1D Software

2021 ◽  
Vol 24 (3) ◽  
pp. 341-347
Author(s):  
K. Bhavsar ◽  
◽  
P.B. Lapsiwala ◽  
Keyword(s):  
Numerical Simulation ◽  
Solar Cells ◽  
Solar Cell ◽  
Electron Transport ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Transport Layer ◽  
Electron Transport Layer

Perovskite solar cells have become a hot topic in the solar energy device area due to high efficiency and low cost photovoltaic technology. However, their function is limited by expensive hole transport material (HTM) and high temperature process electron transport material (ETM) layer is common device structure. Numerical simulation is a crucial technique in deeply understanding the operational mechanisms of solar cells and structure optimization for different devices. In this paper, device modelling for different perovskite solar cell has been performed for different ETM layer, namely: TiO2, ZnO, SnO2, PCBM (phenyl-C61-butyric acid methyl ester), CdZnS, C60, IGZO (indium gallium zinc oxide), WS2 and CdS and effect of band gap upon the power conversion efficiency of device as well as effect of absorber thickness have been examined. The SCAPS 1D (Solar Cell Capacitance Simulator) has been a tool used for numerical simulation of these devices.

scholarly journals Optimization of a compact layer of TiO2via atomic-layer deposition for high-performance perovskite solar cells

2017 ◽  
Vol 1 (7) ◽  
pp. 1533-1540 ◽  
Author(s):  
Ahmed Esmail Shalan ◽  
Sudhakar Narra ◽  
Tomoya Oshikiri ◽  
Kosei Ueno ◽  
Xu Shi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Atomic Layer Deposition ◽  
High Performance ◽  
Perovskite Solar Cells ◽  
Atomic Layer ◽  
Perovskite Solar Cell ◽  
Compact Layer ◽  
Layer Deposition

Configuration of the perovskite solar cell and diagram of the mechanism of preparation of TiO2 using atomic-layer deposition.

Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells

2016 ◽  
Vol 9 (7) ◽  
pp. 2326-2333 ◽  
Author(s):  
Guan-Woo Kim ◽  
Gyeongho Kang ◽  
Jinseck Kim ◽  
Gang-Young Lee ◽  
Hong Il Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Hole Transport ◽  
Highly Efficient

A dopant–free polymeric hole transport material (HTM), RCP, based on benzo[1,2-b:4,5:b′]dithiophene and 2,1,3-benzothiadiazole exhibited a high efficiency of 17.3% in a perovskite solar cell and maintained its initial efficiency for over 1400 hours.

Carbon-Quantum-Dot-Hybridized NiOx Hole-Transport Layer Enables Efficient and Stable Planar p-i-n Perovskite Solar Cells with High Open-Circuit Voltage

2021 ◽  
Author(s):  
Xuefeng Xia ◽  
Dan Zhang ◽  
Xiaofeng Wang ◽  
Zonghu Xiao ◽  
Fan Li
Keyword(s):  
Solar Cell ◽  
Open Circuit Voltage ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Open Circuit ◽  
Hole Transport ◽  
Band Alignment ◽  
Transport Layer ◽  
Hole Transport Layer ◽  
Carbon Quantum Dot

In recent years, the nickel oxide (NiOx)-based planar p-i-n perovskite solar cell (PSC) has progressed rapidly. Nevertheless, poor electrical properties of NiOx, unoptimized band alignment between NiOx and perovskites, as...

Sign in / Sign up

Export Citation Format

Share Document