High performance 0.25 [micro sign]m p-type Ge/SiGe MODFETs

1998 ◽  
Vol 34 (19) ◽  
pp. 1888 ◽  
Author(s):  
G. Höck ◽  
T. Hackbarth ◽  
U. Erben ◽  
E. Kohn ◽  
U. König
Keyword(s):  
2019 ◽  
Vol 288 ◽  
pp. 104-112 ◽  
Author(s):  
Yanghai Gui ◽  
Lele Yang ◽  
Kuan Tian ◽  
Hongzhong Zhang ◽  
Shaoming Fang

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.


2021 ◽  
Author(s):  
Suman Yadav ◽  
Shivani Sharma ◽  
Satinder K Sharma ◽  
Chullikkattil P. Pradeep

Solution-processable organic semiconductors capable of functioning at low operating voltages (~5 V) are in demand for organic field-effect transistor (OFET) applications. Exploration of new classes of compounds as organic thin-film...


Micromachines ◽  
2018 ◽  
Vol 9 (8) ◽  
pp. 412 ◽  
Author(s):  
Evans Bernardin ◽  
Christopher Frewin ◽  
Richard Everly ◽  
Jawad Ul Hassan ◽  
Stephen Saddow

Intracortical neural interfaces (INI) have made impressive progress in recent years but still display questionable long-term reliability. Here, we report on the development and characterization of highly resilient monolithic silicon carbide (SiC) neural devices. SiC is a physically robust, biocompatible, and chemically inert semiconductor. The device support was micromachined from p-type SiC with conductors created from n-type SiC, simultaneously providing electrical isolation through the resulting p-n junction. Electrodes possessed geometric surface area (GSA) varying from 496 to 500 K μm2. Electrical characterization showed high-performance p-n diode behavior, with typical turn-on voltages of ~2.3 V and reverse bias leakage below 1 nArms. Current leakage between adjacent electrodes was ~7.5 nArms over a voltage range of −50 V to 50 V. The devices interacted electrochemically with a purely capacitive relationship at frequencies less than 10 kHz. Electrode impedance ranged from 675 ± 130 kΩ (GSA = 496 µm2) to 46.5 ± 4.80 kΩ (GSA = 500 K µm2). Since the all-SiC devices rely on the integration of only robust and highly compatible SiC material, they offer a promising solution to probe delamination and biological rejection associated with the use of multiple materials used in many current INI devices.


2019 ◽  
Vol 163 ◽  
pp. 761-774 ◽  
Author(s):  
Hulugirgesh Degefu Weldekirstos ◽  
Ming-Chung Kuo ◽  
Sie-Rong Li ◽  
Wei-Lin Su ◽  
Mekonnen Abebayehu Desta ◽  
...  

2021 ◽  
Author(s):  
Qi Zhang ◽  
Hengda Sun ◽  
Meifang Zhu

Abstract Organic thermoelectric (OTE) materials have been regarded as a potential candidate to harvest waste heat from complex, low temperature surfaces of objects and convert it into electricity. Recently, n-type conjugated polymers as organic thermoelectric materials have aroused intensive research in order to improve their performance to match up with their p-type counterpart. In this review, we discuss aspects that affect the performance of n-type OTEs, and further focus on the effect of planarity of backbone on doping efficiency and eventually the TE performance. We then summarize strategies such as implementing rigid n-type polymer backbone or modifying conventional polymer building blocks for more planar conformation. In the outlook part, we conclude forementioned devotions and point out new possibility that may promote the future development of this field.


ACS Nano ◽  
2021 ◽  
Author(s):  
Yepin Zhao ◽  
Pei Cheng ◽  
Hangbo Yang ◽  
Minhuan Wang ◽  
Dong Meng ◽  
...  

2021 ◽  
Author(s):  
Jing Wang ◽  
Yizhuo Wang ◽  
Qing Li ◽  
Zhanchao Li ◽  
Liqing Xu ◽  
...  

Abstract The transport mechanism of organic materials is still far away from being well understood and controlled although conducting polymers have been discovered since 1977. It is rare to see conducting polyers possessing high bipolar (p- and n-type) electrical conductivities within a single bulk doped organic polymer without the assistant of gate voltage. Here, we report a novel approach to provide high performance n-type materials by p-type doping. More importantly, the bipolar electrical conductivities of the donor-acceptor conducting polymer are high, resulting high bipolar power factors among the solution-processable ambipolar D-A copolymers. A fully organic p-n junction is created in a planar film, exhibiting a high rectification ratio of 2 x 102 at +5 V with a high current density of 3 A/cm2. Structural and spectroscopic tests have been performed to provide a fundamental understanding of the polarity switching mechanism. The results open the opportunity of making p- and n-type modules with a single conducting polymer for future modern organic electronics.


Sign in / Sign up

Export Citation Format

Share Document