scholarly journals Energy Efficiency Evaluation of Different Glazing and Shading Systems in a School Building

2019 ◽  
Vol 111 ◽  
pp. 03052 ◽  
Author(s):  
Mohammed Khalaf ◽  
Touraj Ashrafian ◽  
Cem Demirci
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Performance ◽  
Building Envelope ◽  
School Building ◽  
Total Energy Consumption ◽  
Heating And Cooling ◽  
Lighting Energy ◽  
Energy Efficiency Evaluation

The energy conversations methods and techniques take a significant role in the energy performance of the buildings. Façade and shading systems are in continuous development, and recent studies are showing the importance of implementation of such systems to reduce energy consumption and enhance the effectiveness of the building performance. School buildings are mostly being used during daytime, hence, require active use of sunlight. A measure that is taken on a school building envelope can prevent overheating and overcooling and reduce the heating and cooling energy consumption but at the same time can increase the lighting energy consumption vice versa. Thus, it is necessary to optimise the energy required for climatisation of a building with lighting energy demand. The main aim of the paper is to provide analysis for façade and shading systems applied to a school building and study the effectiveness of it on energy consumption and conservation. The case study for this paper is a typical building project designed to be located in Istanbul, Turkey and has a traditional façade system which is clear double layer windows without any shading devices. The analyses of the energy efficiency of these systems will be presented. The different glazing types and shading systems alternatives will show the most efficient one to be used as some optimised alternatives for the systems. Findings indicate that proper glazing and shading systems can reduce the needed energy for heating and lightening and thus total energy consumption of a school building significantly.

scholarly journals Energy Use Efficiency Past-to-Future Evaluation: An International Comparison

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3804 ◽  
Author(s):  
Chia-Nan Wang ◽  
Thi-Duong Nguyen ◽  
Min-Chun Yu
Keyword(s):  
United States ◽  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Use ◽  
The United States ◽  
Total Energy Consumption ◽  
The Future ◽  
The Status ◽  
Energy Efficiency Evaluation

Despite the many benefits that energy consumption brings to the economy, consuming energy also leads nations to expend more resources on environmental pollution. Therefore, energy efficiency has been proposed as a solution to improve national economic competitiveness and sustainability. However, the growth in energy demand is accelerating while policy efforts to boost energy efficiency are slowing. To solve this problem, the efficiency gains in countries where energy consumption efficiency is of the greatest concern such as China, India, the United States, and Europe, especially, emerging economies, is central. Additionally, governments must take greater policy actions. Therefore, this paper studied 25 countries from Asia, the Americas, and Europe to develop a method combining the grey method (GM) and data envelopment analysis (DEA) slack-based measure model (SMB) to measure and forecast the energy efficiency, so that detailed energy efficiency evaluation can be made from the past to the future; moreover, this method can be extended to more countries around the world. The results of this study reveal that European countries have a higher energy efficiency than countries in Americas (except the United States) and Asian countries. Our findings also show that an excess of total energy consumption is the main reason causing the energy inefficiency in most countries. This study contributes to policymaking and strategy makers by sharing the understanding of the status of energy efficiency and providing insights for the future.

scholarly journals Energy Monitoring in a Heating and Cooling System in a Building Based on the Example of the Turówka Hotel

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1968 ◽  
Author(s):  
Marek Borowski ◽  
Piotr Mazur ◽  
Sławosz Kleszcz ◽  
Klaudia Zwolińska
Keyword(s):  
Energy Consumption ◽  
Energy Management ◽  
Energy Demand ◽  
Cooling System ◽  
Energy Performance ◽  
High Energy ◽  
Building Envelope ◽  
Large Variability ◽  
Heating And Cooling ◽  
And Control

The energy consumption of buildings is very important for both economic and environmental reasons. Newly built buildings are characterized by higher insulation and airtightness of the building envelope, and are additionally equipped with technologies that minimize energy consumption in order to meet legal requirements. In existing buildings, the modernization process should be properly planned, taking into account available technologies and implementation possibilities. Hotel buildings are characterized by a large variability of energy demand, both on a daily and a yearly basis. Monitoring systems, therefore, provide the necessary information needed for proper energy management in the building. This article presents an energy analysis of the Turówka hotel located in Wieliczka (southern Poland). The historical hotel facility is being modernized as part of the project to adapt the building to the requirements of a sustainable building. The modernization proposal includes a trigeneration system with a multifunctional reverse regenerator and control module using neural algorithms. The main purpose is to improve the energy efficiency of the building and adapt it to the requirements of low-energy buildings. The implementation of a monitoring system enables energy consumption to be reduced and improves the energy performance of the building, especially through using energy management systems and control modules. The proposed retrofit solution considers the high energy consumption, structure of the energy demand, and limits of retrofit intervention on façades.

Assessment of the Life Cycle Energy Efficiency of a Primary School Building in Turkey

2019 ◽  
Vol 887 ◽  
pp. 335-343
Author(s):  
Nazanin Moazzen ◽  
Mustafa Erkan Karaguler ◽  
Touraj Ashrafian
Keyword(s):  
Energy Efficiency ◽  
Life Cycle ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Use ◽  
Human Life ◽  
Energy Performance ◽  
Building Envelope ◽  
Embodied Energy

Energy efficiency has become a crucial part of human life, which has an adverse impact on the social and economic development of any country. In Turkey, it is a critical issue especially in the construction sector due to increase in the dependency on the fuel demands. The energy consumption, which is used during the life cycle of a building, is a huge amount affected by the energy demand for material and building construction, HVAC and lighting systems, maintenance, equipment, and demolition. In general, the Life Cycle Energy (LCE) needs of the building can be summarised as the operational and embodied energy together with the energy use for demolition and recycling processes.Besides, schools alone are responsible for about 15% of the total energy consumption of the commercial building sector. To reduce the energy use and CO2 emission, the operational and embodied energy of the buildings must be minimised. Overall, it seems that choosing proper architectural measures for the envelope and using low emitting material can be a logical step for reducing operational and embodied energy consumptions.This paper is concentrated on the operating and embodied energy consumptions resulting from the application of different architectural measures through the building envelope. It proposes an educational building with low CO2 emission and proper energy performance in Turkey. To illustrate the method of the approach, this contribution illustrates a case study, which was performed on a representative schoold building in Istanbul, Turkey. Energy used for HVAC and lighting in the operating phase and the energy used for the manufacture of the materials are the most significant parts of embodied energy in the LCE analyses. This case study building’s primary energy consumption was calculated with the help of dynamic simulation tools, EnergyPlus and DesignBuilder. Then, different architectural energy efficiency measures were applied to the envelope of the case study building. Then, the influence of proposed actions on LCE consumption and Life Cycle CO2 (LCCO2) emissions were assessed according to the Life Cycle Assessment (LCA) method.

scholarly journals Application of Rough Set Theory (RST) to Forecast Energy Consumption in Buildings Undergoing Thermal Modernization

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1309 ◽  
Author(s):  
Tomasz Szul ◽  
Stanisław Kokoszka
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Set Theory ◽  
Rough Set ◽  
Energy Demand ◽  
Rough Set Theory ◽  
Residential Buildings ◽  
Simple Procedure ◽  
Energy Performance ◽  
Improve Energy Efficiency

In many regions, the heat used for space heating is a basic item in the energy balance of a building and significantly affects its operating costs. The accuracy of the assessment of heat consumption in an existing building and the determination of the main components of heat loss depends to a large extent on whether the energy efficiency improvement targets set in the thermal upgrading project are achieved. A frequent problem in the case of energy calculations is the lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for a quick technical analysis of measures taken to improve energy efficiency in existing buildings. These methods should have satisfactory results in predicting energy consumption where the input is limited, inaccurate, or uncertain. Therefore, the aim of this work was to test the usefulness of a model based on Rough Set Theory (RST) for estimating the thermal energy consumption of buildings undergoing an energy renovation. The research was carried out on a group of 109 thermally improved residential buildings, for which energy performance was based on actual energy consumption before and after thermal modernization. Specific sets of important variables characterizing the examined buildings were distinguished. The groups of variables were used to estimate energy consumption in such a way as to obtain a compromise between the effort of obtaining them and the quality of the forecast. This has allowed the construction of a prediction model that allows the use of a fast, relatively simple procedure to estimate the final energy demand rate for heating buildings.

scholarly journals Building energy modelling for the energy performance analysis of a hospital building in various locations

2019 ◽  
Vol 111 ◽  
pp. 06073 ◽  
Author(s):  
Ioan Silviu Dobosi ◽  
Cristina Tanasa ◽  
Nicoleta-Elena Kaba ◽  
Adrian Retezan ◽  
Dragos Mihaila
Keyword(s):  
European Union ◽  
Building Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
The European Union ◽  
Total Energy Consumption ◽  
Building Stock ◽  
Heating And Cooling ◽  
Key Factor ◽  
Hospital Building

The building sector has been identified as having the greatest energy reduction potential and therefore represents a key factor for the European Union climate change combat objectives of achieving an 80-95% greenhouse gas emissions reduction by 2050. Hospitals buildings represent 7% of the nonresidential building stock in the European Union and are responsible for approximately 10% of the total energy consumption in this sector. The design and construction of hospital buildings is a complex and challenging activity for all the involved specialists, especially when energy performance is one of the objectives. This paper discusses the energy performance simulation on an hourly basis of a new hospital building that was constructed in the city of Mioveni, Romania. At this stage of the study, the building energy model solely investigates the performance of the building envelope, without modelling the HVAC system. The complexity of the building model derives from the multitude of thermal zones depending on interior temperature and ventilation air changes conditions. Several simulations are performed investigating the heating and cooling energy need depending on the building location.

Heating and Cooling Performance of Building Integrated Solar Roof Panels

2010 ◽  
Vol 168-170 ◽  
pp. 1735-1741
Author(s):  
Mao Yan ◽  
Li Zhu ◽  
Yi Ping Wang ◽  
Ming Ze Zhu
Keyword(s):  
Energy Consumption ◽  
Cooling Capacity ◽  
Building Envelope ◽  
Total Energy Consumption ◽  
Climate Conditions ◽  
Average Heat ◽  
Operation Conditions ◽  
Heating And Cooling ◽  
Roof Panel ◽  
Collecting Efficiency

With the high proportion of building energy consumption in the total energy consumption, it is of great importance to relieve the shortage of conventional energy resources and improve the building environment by incorporating solar energy into buildings. A new type solar roof panels were designed and tested in the present paper, which perfectly achieves the integration of solar equipment with building envelope. This panel can act as the construction component for building envelope and completely removes the double-skin mode for conventional solar equipment, as well as the functional equipment for heating and cooling collecting. Corrugated colored steel roof panel was tested under various climate conditions and operation conditions. The results show that in a typical sunny day the average heat collecting efficiency is 49% and the average cooling capacity is 100W/m2. In a cloudy day, the average heat collecting efficiency is 41% and the average cooling capacity is 84W/m2.

Optimization of Energy Consumption Using BIM-Based Building Energy Performance Analysis

2013 ◽  
Vol 281 ◽  
pp. 649-652 ◽  
Author(s):  
Dae Kyo Jung ◽  
Dong Hwan Lee ◽  
Joo Ho Shin ◽  
Byung Hun Song ◽  
Seung Hee Park
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Performance Analysis ◽  
Cooling System ◽  
Optimization Technique ◽  
Building Energy ◽  
Energy Performance ◽  
Information Modeling ◽  
Building Energy Performance ◽  
Heating And Cooling

Recently, the interest in increasing energy efficiency of building energy management system (BEMS) has become a high-priority and thus the related studies also increased. In particular, since the energy consumption in terms of heating and cooling system takes a large portion of the energy consumed in buildings, it is strongly required to enhance the energy efficiency through intelligent operation and/or management of HVAC (Heating, Ventilation and Air Conditioning) system. To tackle this issue, this study deals with the BIM (Building Information Modeling)-based energy performance analysis implemented in Energyplus. The BIM model constructed at Revit is updated at Design Builder, adding HVAC models and converted compatibly with the Energyplus environment. And then, the HVAC models are modified throughout the comparison between the energy consumption patterns and the real-time monitoring in-field data. In order to maximize the building energy performance, a genetic algorithm (GA)-based optimization technique is applied to the modified HVAC models. Throughout the proposed building energy simulation, finally, the best optimized HVAC control schedule for the target building can be obtained in the form of “supply air temperature schedule”.

scholarly journals Finding Alternative Methods for Controlling the Power Shortage in Kurdistan through Improving Buildings’ Energy Performance

2018 ◽  
Vol 7 (4) ◽  
pp. 124
Author(s):  
Kawar T. Salih
Keyword(s):  
Energy Efficiency ◽  
Developing Countries ◽  
Energy Consumption ◽  
Energy Demand ◽  
Building Design ◽  
Energy Performance ◽  
Alternative Methods ◽  
Research Approach ◽  
Building Sector

The power shortage is one of the major problems in developing countries. Kurdistan Region of Iraq suffers from this issue, like other developing countries. Especially, after the economy crises that has started in 2014. However, all its efforts for tackling this challenge has been in providing more energy supply stations and more fuel provision. Few studies have been found in the region that seek the relation between the quality of buildings and energy consumption. It is questioned if the building sector in Kurdistan is well managed and environmentally sufficient to consume minimum amount of energy since it is the largest energy consuming sector. This research will seek an alternative to decrease the energy demand in buildings instead of expanding the energy sector. This could be achieved by evaluating the quality of building sector environmentally and improving it. Providing guidelines for building’s thermal regulations, passive building design and increasing the energy efficiency of buildings by renewal means could be alternative strategies for lowering the energy consumption. Theoretical and numerical research approach have been taken in to account for finding the answer through a case study and comparative analysis. A variation of 21-29% of power consumption can be observed between buildings that have not considered energy efficiency criteria in their design and those who reflected them more in the design.

scholarly journals Impact of orientation and building envelope characteristics on energy consumption case study of office building in city of Nis

2018 ◽  
Vol 22 (Suppl. 5) ◽  
pp. 1499-1509
Author(s):  
Miomir Vasov ◽  
Jelena Stevanovic ◽  
Veliborka Bogdanovic ◽  
Marko Ignjatovic ◽  
Dusan Randjelovic
Keyword(s):  
Energy Consumption ◽  
Early Stage ◽  
Building Energy ◽  
Energy Performance ◽  
Building Envelope ◽  
Office Building ◽  
Climatic Data ◽  
Building Energy Efficiency ◽  
Maximum Difference ◽  
Heating And Cooling

Buildings are one of the biggest energy consumers in urban environments, so its efficient use represents a constant challenge. In public objects and households, a large part of the energy is used for heating and cooling. The orientation of the object, as well as the overall heat transfer coefficient (U-value) of transparent and non-transparent parts of the envelope, can have a significant impact on building energy needs. In this paper, analysis of the influence of different orientations, U-values of envelope elements, and size of windows on annual heating and cooling energy for an office building in city of Nis, Serbia, is presented. Model of the building was made in the Google SketchUp software, while the results of energy performance were obtained using EnergyPlus and jEplus, taking into ac-count the parameters of thermal comfort and climatic data for the area of city of Nis. Obtained results showed that, for varied parameters, the maximum difference in annual heating energy is 15129.4 kWh, i. e per m2 27.75 kWh/m2, while the maximum difference in annual cooling energy is 14356.1 kWh, i. e per m2 26.33 kWh/m2. Considering that differences in energy consumption are significant, analysis of these parameters in the early stage of design process can affect on increase of building energy efficiency.

scholarly journals Energy Efficiency Measures Applied to Heritage Retrofit Buildings: A Simulated Student Housing Case Study in Vienna

Heritage ◽  
2021 ◽  
Vol 4 (4) ◽  
pp. 3919-3937
Author(s):  
Essam Elnagar ◽  
Simran Munde ◽  
Vincent Lemort
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy Performance ◽  
Building Envelope ◽  
Positive Energy ◽  
Energy Status ◽  
Pv System ◽  
Energy Efficiency Measures ◽  
Efficiency Measures

One pavilion was selected for deep retrofitting from the Otto Wagner area situated in the west of Vienna. The retrofitting process involves sustainable and energy-efficient construction to improve the energy performance and energy production potential of the building while preserving the cultural heritage and significance. This four-story pavilion was re-designed according to the proposed regulations of a net positive energy university building to become a student residence. Architectural, building envelope, and engineering interventions along with various changes were simulated through the Sefaira tool in the SketchUp model. These included: optimization of the U-values of the roof, walls, and floor; the addition of different layers of sustainable energy-efficient insulation materials to decrease the overall energy demand. The specific energy demands for heating, cooling, and lighting were decreased in the proposed model to reduce the total energy use intensity from 248.9 kWh/(m2 year) to 54.3 kWh/(m2 year) resulting in a 78.2% reduction. The main goal of this study is to try and achieve a net positive energy status building as part of the Otto Wagner area by improving the building envelope and integrating renewable energies. A total of 22.5% of the annual energy consumption was generated by the designed PV system. The selected building achieved the passive house standards in Austria by optimizing the energy performance with the proposed energy efficiency measures.

Sign in / Sign up

Export Citation Format

Share Document