scholarly journals Construction technology and quality control of expansion joints with rubber compensators

2021 ◽  
Vol 264 ◽  
pp. 02066
Author(s):  
Rustem Mukhametrakhimov ◽  
Indira Aliullova
Keyword(s):  
Quality Control ◽  
Control System ◽  
Road Safety ◽  
Visual Inspection ◽  
The Other ◽  
Construction Technology ◽  
Structural Elements ◽  
Bridge Construction ◽  
Expansion Joints

Expansion joints play an important role in the operation of bridge construction. The reliability and durability of most of the other structural elements of the bridge depend on its quality and have a significant impact on road safety. One of the most effective types of expansion joints is rubber compensators, the service life of which directly depends on the quality of its installation. In this work, the types and classifications of expansion joints of bridge construction are studied, their defects and causes of their appearance are analyzed, a visual inspection of the state of expansion joints of the bridge is performed. The technology and quality control system of technological processes for constructing s single-profile expansion joints with rubber compensators during the repair of bridge construction is proposed.

scholarly journals Quality Control Measures in Highway Bridge Construction

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Bing Fu
Keyword(s):  
Quality Control ◽  
Control Strategies ◽  
Modern Society ◽  
Control Measures ◽  
Bridge Engineering ◽  
Highway Bridge ◽  
Construction Technology ◽  
Bridge Construction ◽  
China Development

Highway bridge engineering is an important part of modern transportation system. It has a great effect on the devel-opment of modern society. Therefore, it is very important to ensure the construction quality of highway bridge engi-neering. At present, there are more and more construction technology quality control issues in the construction of high-way bridges should be given enough attention. The problems should be actively found out and effectively solved to improve the quality of life, while promoting China development of infrastructure construction. This paper analyzes the quality control strategies in the highway bridge construction.

Analysis of Technology and Quality Control Measures of Road Bridge Construction

2014 ◽  
Vol 1055 ◽  
pp. 139-142
Author(s):  
Ming Yang ◽  
Hui Wang ◽  
Feng He ◽  
Qing Min Liu
Keyword(s):  
Quality Control ◽  
Social Development ◽  
Control Measures ◽  
Bridge Engineering ◽  
Construction Technology ◽  
Bridge Construction ◽  
Construction Quality ◽  
The Poor

This paper describes the importance of increasing control of technology and quality of road bridge construction and puts forwards effective measures to control the proposed road bridge construction technology and quality. Road bridge engineering is a basic livelihood projects while also ensuring economic and social development, but in recent years the reports about the quality of bridge construction repeatedly appeared in press which highlighting the poor construction quality control.

scholarly journals External Quality Assessment in the Evaluation of Laboratory Performance of Faecal Culture

2017 ◽  
Vol 10 ◽  
pp. 117863611769125
Author(s):  
Salla J Kiiskinen ◽  
Tarja Ojanen ◽  
Yvonne Björkman ◽  
Harri Laitinen ◽  
Anja Siitonen
Keyword(s):  
Public Health ◽  
Quality Control ◽  
External Quality Assessment ◽  
False Negative ◽  
The Other ◽  
Epidemiological Surveillance ◽  
External Quality Control ◽  
External Quality ◽  
Faecal Culture

In Finland, all laboratories carrying out diagnostics of infectious diseases in humans are approved by the Regional State Administrative Agencies and are obligated to participate in External Quality Assurance rounds. Performance in these rounds is thought to reflect the quality of laboratory work. In the 6-year study period, 17 Finnish laboratories received 48 simulated faecal specimens for the culturing of diarrhoeal pathogens, yielding altogether 586 faecal culture External Quality Control specimens and 581 reports. The results were correct in 92% of all reports and in 67% of all specimens. False-negative Salmonella results were given for 2 of the 18 specimens, one with biochemically atypical Salmonella strain and the other with a low count of Salmonella cells. False-negative Shigella report was given for 6 of the 7 specimens in some participating laboratory. Detection of all common faecal pathogens is especially relevant to patient safety, public health, and epidemiological surveillance.

scholarly journals PEMBERIAN STIMULAN PADA BIDANG SADAP DALAM MEMPENGARUHI PRODUKSI DAN KUALITAS LATEKS TANAMAN KARET (Hevea brasiliensis (Muell. Arg.)

2019 ◽  
Vol 4 (1) ◽  
pp. 38
Author(s):  
Hayata Hayata ◽  
Yulistiati Nengsih ◽  
Rahmanto Wibowo
Keyword(s):  
Quality Control ◽  
Ash Content ◽  
The Other ◽  
Rubber Content ◽  
Randomized Design ◽  
Treatment Factor ◽  
Completely Randomized Design ◽  
Four Levels ◽  
Latex Production

Production increasing of latex on rubber plants can be increased by using a stimulants. One of it  is Vicar 10 SL. The purpose of this study was to find out the effect of Vicar 10 SL on the production and quality of latex. This research was carried out in the Kasang Parit Village, Sekernan District, Muaro Jambi Regency, and the Goods Quality Control and Certification Center on Industry and trade department   in Jambi Province. The study was conducted in July to August 2017. The design used was a completely randomized design with one treatment factor as the Vicar 10 SL application with four levels of treatment, namely; Without treatment (V0/control), 1 ml/Tree (V1), 2 ml/tree (V2), 3 ml/tree (V3). There were 4 times  repeatation on each treatment. Using  fingers, a Vicar 10 SL solution was applied to the tapping groove which was adjusted to the treatment, and allowed to keep it 24 hours. Tapping is done in the next morning, by following the grooves and be stored in a cup and left until the latex stoped dripping. Vicar was given once a week during 30 days. Tapping was done 3 times a week. The variables observed were latex production (gram/tree/day), dry rubber content (%), latex ash content (%), and latex dirt content (%). Vicar giving 10 SL in the tapping site with a dose of 2 ml / tree gave the highest yield of latex production (93.38 grams / tree / day) and dry rubber content (75.50%) and was significantly different compared to the other treatments. Vicar giving 10 SL in tapping site had no significant effect on latex dirt content and latex ash contentKeywords: Latex, stimulant, product and quality Abstrak Peningkatan produksi lateks pada tanaman karet dapat ditingkatkan dengan menggunakan stimulan. Salah satu pemakaian yang digunakan adalah Vikar 10 SL. Tujuan penelitian ini adalah untuk megetahui penggunaan stimulan pada bidang sadap dalam mempengaruhi produksi dan kualitas lateks. Penelitian ini dilakukan di Desa kasang Parit Kecamatan Sekernan Kabupaten Muaro Jambi, dan Balai Pengujian dan Sertifikasi Mutu Barang (BPSMB) Disperindag Propinsi Jambi. Penelitian dilakukan pada bulan Juli sampai dengan Agustus 2017. Rancangan yang digunakan adalah Rancangan Acak Lengkap dengan satu faktor perlakuan pemberian stimulan (Vikar 10 SL) dengan empat taraf perlakuan  yaitu; Tanpa perlakuan (V0/kontrol),  1 ml/ Pohon (V1),  2 ml/pohon (V2), 3 ml/pohon  (V3). Setiap perlakuan diulang sebanyak 4 kali. Dengan menggunakan jari dioleskan larutan Vikar 10 SL pada alur sadap  yang disesuaikan dengan perlakuan, dan didiamkan selama 24 jam. Penyadapan dilakukan pada pagi hari esoknya, dengan mengikuti alur torehan dan ditampung dalam cawan dan dibiarkan sampai lateks berhenti menetes. Pemberian Vikar dilakukan sekali 7 hari selama 30 hari. Penyadapan dilakukan  3 kali dalam seminggu. Peubah yang diamati adalah produksi lateks (gram/pohon/hari)), kadar karet kering (%), kadar abu lateks (%), kadar kotoran lateks (%). Pemberian stimulan (Vikar 10 SL) pada bidang sadap dengan dosis 2 ml/pohon memberikan hasil yang tertinggi terhadap produksi lateks 93,38 gram/pohon/hari dan kadar karet kering 75,50 % dan berbeda nyata bila dibandingkan dengan perlakuan lainnya. Pemberian stimulan (Vikar 10 SL) pada bidang sadap berpengaruh tidak nyata terhadap kotoran lateks dan kadar abu lateksKata kunci :Lateks, stimulan, produksi dan kualitas

scholarly journals POSSIBLE DEFECTS IN WOOD, WOOD PARAMETERS VARIABILITY AND SOME OF ITS INFLUENCE ON QUALITY OF BUILDING STRUCTURE

2015 ◽  
Vol 7 (2) ◽  
pp. 67-80
Author(s):  
Jaroslaw Malesza
Keyword(s):  
Three Dimensional ◽  
Residential Building ◽  
Theoretical Description ◽  
Construction Technology ◽  
Structural Elements ◽  
Require Time ◽  
Factory Production ◽  
3D Elements ◽  
Load Increase

Paper specifies the wood-framed with sheathing construction including phases of realization and exploitation. Methods of investigation based on practice and theory has been employed where practical identification of processes and their phases were presented with theoretical description of structure deformation within the exploitation period. Obtained results of investigations are presented in the form of technologic and mechanic of structure diagrams for buildings with adequate algorithms of analysis. Paper presents practical systematic of construction stages, technological problems and hazards in respect of loading and construction technology with method of computation of vertical deformations of building. Paper presents evaluation of contribution of wood defects in response to loading in the wood-framed residential building in exploitation process. Location of knots, allocation of pith in the elements cross section, defects of slope of grain and influence of moisture decreasing is examined in the paper. The wood-framed with sheathing in the form of large panel or modular three dimensional 3D elements are the most often used technology. This kind of buildings are actually constructed up to four story as a multifamily or varying universal buildings like school, kid-garden or offices. Low dead load from 0.30 to 1.00 kN/m2 and its favorable proportion to the live load increase energy saving factor in realization and within the exploitation time. Low own weight of structure enables complete prefabrication of wall, floor and roof panels, improving quality of construction and shortening time of construction. Process of prefabrication, wide assortment and variety of factory production does not require time consuming processes and complicated moulds or shuttering indispensable in precast RC structural elements.

Quality Control System for Die Castings Based on Statistic Analysis

2012 ◽  
Vol 246-247 ◽  
pp. 918-923
Author(s):  
Xiao Fang Ruan
Keyword(s):  
Quality Control ◽  
Control System ◽  
Statistical Analysis ◽  
Die Casting ◽  
Ferrous Metal ◽  
Casting Machine ◽  
Casting Process ◽  
Quality Control System ◽  
Die Castings

Die casting technology is applied widely for mass production of non-ferrous metal parts. How to guarantee the quality of die castings is always a concerned topic. A quality control system for die casting machine was developed based on statistical analysis of technology parameters. Firstly the original data is acquired from die casting machine and the technology curves are displayed. Secondly, the technology parameters are identified automatically and a database of technology parameters is established. Thirdly, a statistical analysis based on the database is performed. The statistics parameters of expecta -tion and deviation are figured out and the probability distribution diagrams for technology parameters are displayed. Finally, Tolerances for technology parameters are figured out and then the system will monitor the die casting process according to the tolerances. A practical system realization in a die casting machine is demonstrated by its monitoring interfaces. Statistical information and on-line monitoring provided by this system are helpful to guarantee the quality of die castings.

scholarly journals ANALISIS SISTEM PENGAWASAN KUALITAS PRODUK PADA PT INDUSTRI SANDANG NUSANTARA UNIT PATAL SECANG DI MAGELANG JAWA TENGAH

2014 ◽  
Vol 5 (2) ◽  
Author(s):  
Listiani Listiani
Keyword(s):  
Quality Control ◽  
Control System ◽  
Production Process ◽  
Raw Materials ◽  
Employee Performance ◽  
Fish Bone ◽  
Quality Control System ◽  
Observation Data ◽  
And Control

This research is aimed to determine the quality control system of production process in PT Industri Sandang Nusantara unit Patal Secang, measure the efectivity of quality control system by using control P-Chart and determine factors that cause defect product. This research is explorative descriptive by case study method. Data used in this research is the procedure of production process and the number of defect product. Product used in this company is  thread R30/1 UW and R 40/1 UW PT Industri Sandang Nusantara Unit Patal Secang in 24 periods of production between April – Mei 2006. Data is collected by interview, documentation, and observation. Data is analyzed by control p-chart and fish bone diagram. The conclusion of this research are: (1) The quality control system which is consists of controlling raw materials, production process and final product is appropriate with the company’s standard; (2) the number of defect product R 30/1 UW is 26.956 bale with the average 0.0167; Control P Chart shows that there are three periods which are out of control. They are in April 30, Mei 5 and 21, 2006. (3) The number of final product R 40/1 UW is 2159 bale with the average 0.0214; control p-chart shows that there are tw periods which are out of control. They are ini Mei 6 and Mei 12, 2006. (4) Factors that cause defect product are obsolete machines, employee performance, control system, and raw materials. Based on that condition, management should impove the controlling of machines, improve motivation and commitment of the employee, improve the method of inspection and control the quality of raw materials.

scholarly journals Delayed-Mode Quality Control of Oxygen, Nitrate, and pH Data on SOCCOM Biogeochemical Profiling Floats

2021 ◽  
Vol 8 ◽  
Author(s):  
Tanya L. Maurer ◽  
Joshua N. Plant ◽  
Kenneth S. Johnson
Keyword(s):  
Quality Control ◽  
Southern Ocean ◽  
Chemical Sensors ◽  
Visual Inspection ◽  
Stages Of Development ◽  
Crucial Step ◽  
Ocean Carbon ◽  
Automated Processes

The Southern Ocean Carbon and Climate Observations and Modeling (SOCCOM) project has deployed 194 profiling floats equipped with biogeochemical (BGC) sensors, making it one of the largest contributors to global BGC-Argo. Post-deployment quality control (QC) of float-based oxygen, nitrate, and pH data is a crucial step in the processing and dissemination of such data, as in situ chemical sensors remain in early stages of development. In situ calibration of chemical sensors on profiling floats using atmospheric reanalysis and empirical algorithms can bring accuracy to within 3 μmol O2 kg–1, 0.5 μmol NO3– kg–1, and 0.007 pH units. Routine QC efforts utilizing these methods can be conducted manually through visual inspection of data to assess sensor drifts and offsets, but more automated processes are preferred to support the growing number of BGC floats and reduce subjectivity among delayed-mode operators. Here we present a methodology and accompanying software designed to easily visualize float data against select reference datasets and assess QC adjustments within a quantitative framework. The software is intended for global use and has been used successfully in the post-deployment calibration and QC of over 250 BGC floats, including all floats within the SOCCOM array. Results from validation of the proposed methodology are also presented which help to verify the quality of the data adjustments through time.

Evolution and the meaning of metaphase

1992 ◽  
Vol 102 (4) ◽  
pp. 681-690
Author(s):  
R.B. Nicklas ◽  
P. Arana
Keyword(s):  
Cell Cycle ◽  
Quality Control ◽  
Control System ◽  
Natural Selection ◽  
Sex Chromosome ◽  
Spindle Pole ◽  
The Other ◽  
Quality Control System ◽  
Normal Sperm ◽  
Unpaired Chromosome

We used an evolutionary test to ask whether the congression of chromosomes to the spindle equator is important in itself or just a mitotic happenstance. If congression matters, then it might evolve if absent initially. Previous workers established that newly made trivalents, meiotic units of three chromosomes, generally do not congress to the spindle equator. Instead, these young trivalents lie close to the pole to which two of the three chromosomes are oriented. We studied ancient sex-chromosome trivalents that arose hundreds of thousands to several million years ago in several species of praying mantids and one grasshopper. All these old trivalents lie near the spindle equator at metaphase; some of them congress as precisely to the equator as the ordinary chromosomes in the same cells. We conclude that congression evolved independently two or three times in the materials studied. Therefore, the metaphase position of chromosomes midway between the poles appears to matter, but why? In the praying mantids, the evident answer is that metaphase is a quality-control checkpoint. Sometimes the three chromosomes are not associated in a trivalent but rather are present as a bivalent plus an unpaired chromosome, which lies near one pole. Earlier workers showed that such cells are blocked in metaphase and eventually degenerate; this prevents the formation of sperm with abnormal combinations of sex chromosomes. We suggest that the quality-control system would have trouble distinguishing an unpaired chromosome from an uncongressed, newly arisen trivalent, both of which would lie near a spindle pole. If so, the confused quality-control system would block anaphase imprudently, causing a loss of cells that would have produced normal sperm. Hence, we conclude that the congression of the trivalent to the equator probably evolved along with the metaphase quality-control checkpoint. The mechanism of congression in old trivalents is uncertain, but probably involves an interesting force-sensitive regulation of the motors associated with particular chromosomes. We also examined the congression of two newly made quadrivalents when they orient with three kinetochores to one pole and one to the other. As others have described, one of these quadrivalents does not congress, while the other quadrivalent comes closer than expected to the spindle equator. Such variation in the extent of congression may provide materials on which natural selection can act, leading to the evolution of congression. The trivalents of praying mantids are attractive materials for further studies of the mechanism of congression and of the idea that metaphase is a checkpoint for progression through the cell cycle.

Sign in / Sign up

Export Citation Format

Share Document