scholarly journals PEMBERIAN STIMULAN PADA BIDANG SADAP DALAM MEMPENGARUHI PRODUKSI DAN KUALITAS LATEKS TANAMAN KARET (Hevea brasiliensis (Muell. Arg.)

2019 ◽  
Vol 4 (1) ◽  
pp. 38
Author(s):  
Hayata Hayata ◽  
Yulistiati Nengsih ◽  
Rahmanto Wibowo
Keyword(s):  
Quality Control ◽  
Ash Content ◽  
The Other ◽  
Rubber Content ◽  
Randomized Design ◽  
Treatment Factor ◽  
Completely Randomized Design ◽  
Four Levels ◽  
Latex Production

Production increasing of latex on rubber plants can be increased by using a stimulants. One of it  is Vicar 10 SL. The purpose of this study was to find out the effect of Vicar 10 SL on the production and quality of latex. This research was carried out in the Kasang Parit Village, Sekernan District, Muaro Jambi Regency, and the Goods Quality Control and Certification Center on Industry and trade department   in Jambi Province. The study was conducted in July to August 2017. The design used was a completely randomized design with one treatment factor as the Vicar 10 SL application with four levels of treatment, namely; Without treatment (V0/control), 1 ml/Tree (V1), 2 ml/tree (V2), 3 ml/tree (V3). There were 4 times  repeatation on each treatment. Using  fingers, a Vicar 10 SL solution was applied to the tapping groove which was adjusted to the treatment, and allowed to keep it 24 hours. Tapping is done in the next morning, by following the grooves and be stored in a cup and left until the latex stoped dripping. Vicar was given once a week during 30 days. Tapping was done 3 times a week. The variables observed were latex production (gram/tree/day), dry rubber content (%), latex ash content (%), and latex dirt content (%). Vicar giving 10 SL in the tapping site with a dose of 2 ml / tree gave the highest yield of latex production (93.38 grams / tree / day) and dry rubber content (75.50%) and was significantly different compared to the other treatments. Vicar giving 10 SL in tapping site had no significant effect on latex dirt content and latex ash contentKeywords: Latex, stimulant, product and quality Abstrak Peningkatan produksi lateks pada tanaman karet dapat ditingkatkan dengan menggunakan stimulan. Salah satu pemakaian yang digunakan adalah Vikar 10 SL. Tujuan penelitian ini adalah untuk megetahui penggunaan stimulan pada bidang sadap dalam mempengaruhi produksi dan kualitas lateks. Penelitian ini dilakukan di Desa kasang Parit Kecamatan Sekernan Kabupaten Muaro Jambi, dan Balai Pengujian dan Sertifikasi Mutu Barang (BPSMB) Disperindag Propinsi Jambi. Penelitian dilakukan pada bulan Juli sampai dengan Agustus 2017. Rancangan yang digunakan adalah Rancangan Acak Lengkap dengan satu faktor perlakuan pemberian stimulan (Vikar 10 SL) dengan empat taraf perlakuan  yaitu; Tanpa perlakuan (V0/kontrol),  1 ml/ Pohon (V1),  2 ml/pohon (V2), 3 ml/pohon  (V3). Setiap perlakuan diulang sebanyak 4 kali. Dengan menggunakan jari dioleskan larutan Vikar 10 SL pada alur sadap  yang disesuaikan dengan perlakuan, dan didiamkan selama 24 jam. Penyadapan dilakukan pada pagi hari esoknya, dengan mengikuti alur torehan dan ditampung dalam cawan dan dibiarkan sampai lateks berhenti menetes. Pemberian Vikar dilakukan sekali 7 hari selama 30 hari. Penyadapan dilakukan  3 kali dalam seminggu. Peubah yang diamati adalah produksi lateks (gram/pohon/hari)), kadar karet kering (%), kadar abu lateks (%), kadar kotoran lateks (%). Pemberian stimulan (Vikar 10 SL) pada bidang sadap dengan dosis 2 ml/pohon memberikan hasil yang tertinggi terhadap produksi lateks 93,38 gram/pohon/hari dan kadar karet kering 75,50 % dan berbeda nyata bila dibandingkan dengan perlakuan lainnya. Pemberian stimulan (Vikar 10 SL) pada bidang sadap berpengaruh tidak nyata terhadap kotoran lateks dan kadar abu lateksKata kunci :Lateks, stimulan, produksi dan kualitas

scholarly journals PENGARUH LAMA PENGUKUSAN TERHADAP KUALITAS KERUPUK SINGKONG DENGAN BAHAN DASAR TEPUNG CASAVA

AGRICA ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 38-43
Author(s):  
Yuyun Wahyuni
Keyword(s):  
Ash Content ◽  
Consumer Acceptance ◽  
Physical Factors ◽  
Food Ingredients ◽  
Randomized Design ◽  
Treatment Factor ◽  
Completely Randomized Design ◽  
Processed Products ◽  
Organoleptic Parameters

Cassava is also known as cassava, an annual tropical and sub-tropical tree from the Euphorbiaceae family. Tubers widely recognized as staple foods. Cassava has advantages compared to other food ingredients. Aside from being a staple food, many kinds of cassava processed products have utilized by our community, including cassava crackers. This study used a Completely Randomized Design (CRD) with 5 (five) treatments and 4 (four) replications or 5 x 4 to obtain 20 experimental units. The treatment factor is steaming length, which consists of 5 levels of steaming time as follows: A: 30 minutes, B: 60 minutes, C: 90 minutes, D: 120 minutes, E: 150 minutes. The quality of cassava crackers to be tested or measured based on their physical appearance is related to consumer acceptance. In conducting organoleptic testing, panelists influenced by several factors. Factors that influence panelists include physical factors and psychological factors. The organoleptic parameters observed included color, taste, and degree of crispness. Laboratory tests include carbohydrate tests, water content, ash content, protein, and fat content. The conclusion was that the effect of steaming time had no significant effect on moisture content, ash content, protein, and crispness, while the effect of steaming duration had a significant impact on the levels of fat, carbohydrate, taste, and color in cassava crackers. The best quality of the five treatments was treatment 5 (p5), ie, steaming time with 150 minutes

scholarly journals Kualitas Sosis Daging Ayam Dengan Penambahan Tepung Tapioka

2020 ◽  
Vol 5 (2) ◽  
pp. 64
Author(s):  
Bulkaini Bulkaini ◽  
Djoko Kisworo ◽  
Sukirno Sukirno ◽  
Rani Wulandani ◽  
Maskur Maskur
Keyword(s):  
Protein Content ◽  
Nutritional Value ◽  
Ash Content ◽  
The Other ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Tapioca Flour ◽  
Addition Level ◽  
Range Test

The study was aimed to determine the effect of tapioca flour addition atvarious levels on the quality of chicken sausage. The research was design based on a Completely Randomized Design (CRD) with 4 treatments and 3 replications. The treatment of tapioca flour addition level were: 0%, 10%, 20% and 30%. Data ofsausage quality were analyzed using Analysis of Variance and continued with Duncan's Multiple Range Test. The results showed that the addition of tapioca flour in the process of chicken sausage making were significantly affect (P <0.05) moisture and protein content, while the fat and ash content were not significantly effected (P> 0.05) by the treatment. The addition of 10% tapioca flour obtained the highest nutritional value of protein (17.67 ± 0.93) % as compared to the other levels.

PENGARUH LAMA PENGUKUSAN TERHADAP KUALITAS KERUPUK SINGKONG DENGAN BAHAN DASAR TEPUNG CASAVA

AGRICA ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 38-43
Author(s):  
Yuyun Wahyuni
Keyword(s):  
Ash Content ◽  
Consumer Acceptance ◽  
Physical Factors ◽  
Food Ingredients ◽  
Randomized Design ◽  
Treatment Factor ◽  
Completely Randomized Design ◽  
Processed Products ◽  
Organoleptic Parameters

Cassava is also known as cassava, an annual tropical and sub-tropical tree from the Euphorbiaceae family. Tubers widely recognized as staple foods. Cassava has advantages compared to other food ingredients. Aside from being a staple food, many kinds of cassava processed products have utilized by our community, including cassava crackers. This study used a Completely Randomized Design (CRD) with 5 (five) treatments and 4 (four) replications or 5 x 4 to obtain 20 experimental units. The treatment factor is steaming length, which consists of 5 levels of steaming time as follows: A: 30 minutes, B: 60 minutes, C: 90 minutes, D: 120 minutes, E: 150 minutes. The quality of cassava crackers to be tested or measured based on their physical appearance is related to consumer acceptance. In conducting organoleptic testing, panelists influenced by several factors. Factors that influence panelists include physical factors and psychological factors. The organoleptic parameters observed included color, taste, and degree of crispness. Laboratory tests include carbohydrate tests, water content, ash content, protein, and fat content. The conclusion was that the effect of steaming time had no significant effect on moisture content, ash content, protein, and crispness, while the effect of steaming duration had a significant impact on the levels of fat, carbohydrate, taste, and color in cassava crackers. The best quality of the five treatments was treatment 5 (p5), ie, steaming time with 150 minutes

scholarly journals PENGARUH LAMA PENGUKUSAN TERHADAP KUALITAS KERUPUK SINGKONG DENGAN BAHAN DASAR TEPUNG CASAVA

AGRICA ◽  
2019 ◽  
Vol 1 (2) ◽  
pp. 38-43
Author(s):  
Yuyun Wahyuni
Keyword(s):  
Ash Content ◽  
Consumer Acceptance ◽  
Physical Factors ◽  
Food Ingredients ◽  
Randomized Design ◽  
Treatment Factor ◽  
Completely Randomized Design ◽  
Processed Products ◽  
Organoleptic Parameters

Cassava is also known as cassava, an annual tropical and sub-tropical tree from the Euphorbiaceae family. Tubers widely recognized as staple foods. Cassava has advantages compared to other food ingredients. Aside from being a staple food, many kinds of cassava processed products have utilized by our community, including cassava crackers. This study used a Completely Randomized Design (CRD) with 5 (five) treatments and 4 (four) replications or 5 x 4 to obtain 20 experimental units. The treatment factor is steaming length, which consists of 5 levels of steaming time as follows: A: 30 minutes, B: 60 minutes, C: 90 minutes, D: 120 minutes, E: 150 minutes. The quality of cassava crackers to be tested or measured based on their physical appearance is related to consumer acceptance. In conducting organoleptic testing, panelists influenced by several factors. Factors that influence panelists include physical factors and psychological factors. The organoleptic parameters observed included color, taste, and degree of crispness. Laboratory tests include carbohydrate tests, water content, ash content, protein, and fat content. The conclusion was that the effect of steaming time had no significant effect on moisture content, ash content, protein, and crispness, while the effect of steaming duration had a significant impact on the levels of fat, carbohydrate, taste, and color in cassava crackers. The best quality of the five treatments was treatment 5 (p5), ie, steaming time with 150 minutes

KARAKTERISTIK FISIK BUBUR INSTAN TERSUBTITUSI TEPUNG PISANG TONGKA LANGIT

2015 ◽  
Vol 4 (2) ◽  
pp. 41-44
Author(s):  
Priscillia Picauly ◽  
Gilian Tetelepta
Keyword(s):  
Water Solubility ◽  
Physical Property ◽  
Rice Flour ◽  
Absorption Index ◽  
Randomized Design ◽  
Nutrition Value ◽  
Banana Flour ◽  
Completely Randomized Design ◽  
Four Levels

Instant porridge is sereal-based food that can be combined with fruits so it will contain better nutrition. To improve the nutrition value of instant porridge then substitute of one kind of banana originally from Maluku is Tongka langit banana. A good quality of instant porridge has a high nutrition and a best physical property. This research aims to characterize of the physical properties instant porridge that are substituted by Tongka langit banana flour and the rice flour. The design that is applied is completely randomized design with four levels of treatment in comparing the substitution between Tongka langit banana flour and the rice flour as follow 20%, 40%, 60% and 80%. According to the result of this research, the physical characteristic of instant porridge that are substituted by Tongka langit banana flour are bulk density (0.84-0.89 g/mL), water absorption index (3.49-4.05%), and water solubility index (0.02-0.04%).

scholarly journals EKSTRAK KARAGINAN RUMPUT LAUT (Eucheuma cottonii) YANG DIPEROLEH DARI PANTAI TABLOLONG

2021 ◽  
Vol 3 (3) ◽  
pp. 119-127
Author(s):  
Runa Matias Ruku ◽  
Alfred G.O Kase ◽  
Hartini R.L Solle
Keyword(s):  
Fat Content ◽  
Ash Content ◽  
Test Results ◽  
A Value ◽  
Randomized Design ◽  
Yield Test ◽  
Completely Randomized Design ◽  
Quantitative Descriptive ◽  
Treatment Concentration

ABSTRACTEucheuma cottonii (E. cottonii) seaweed is a low level plant that has a high nutritional value. One of the ingredients that play a role in the formation of texture is carrageenan.Carrageenan is a type of hydrocolloid extracted from the seaweed of the red algae group (Rhodophyceae). The purpose of this study was to determine the quality of yields of Seaweed Carrageenan Extract (E. cottonii) obtained from Tablolong beach in the form of yield, ash content and fat content. The method used in this study is an experimental method with a completely randomized design (CRD) and for fat testing using quantitative descriptive methods. This study uses various concentrations of 0.1 N KOH, 0.2 N KOH, 0.3 N KOH and 0.4 N KOH. The results of the carrageenan yield test show that the addition of 0.1 N KOH concentration has a value of 56.10, KOH 0 , 2 N 62.16, KOH 0.3 N 72.73 and the best treatment was at P4 KOH 0.4 N 80.90. Carrageenan ash content test results showed that the addition of KOH concentration value obtained P1 KOH 0.1 N was 60.50, P2 KOH 0.2 N was 70.70, P3 KOH 0.3 N was 80.50, and P4 KOH 0.4 with a value of 90.50. The results of the carrageenan fat content of 0.1 KOH treatment has a fat content of 0, 2 while the treatment of KOH 0,2, KOH 0,3, KOH 0,4 have no fat content by showing the value (0). The results showed that the highest yield in the treatment of KOH concentration of 0.4 N with a value 80.95% and carrageenan ash content has the highest value in the treatment concentration of 0.4 N with a value of 90.50% while the fat content has a value of 0.2 in the treatment of KOH concentration of 0.1 N Keywords: Carrageenan, extract of E. cottonii seaweed.

Skrining Fitokimia Enam Genotipe Teh

2014 ◽  
Vol 1 (2) ◽  
pp. 63
Author(s):  
Budi Martono ◽  
Rudi T. Setiyono
Keyword(s):  
Camellia Sinensis ◽  
Chemical Constituents ◽  
The Other ◽  
Preliminary Evaluation ◽  
Phytochemical Screening ◽  
Tea Leaves ◽  
Randomized Design ◽  
Medicinal Crops ◽  
Completely Randomized Design

<p>Skrining fitokimia dimaksudkan untuk melakukan evaluasi pendahuluan tentang kandungan kimia pada teh (Camellia sinensis). Selain itu, teh mengandung katekin yang dapat digunakan sebagai petunjuk kualitas dari daun teh. Penelitian bertujuan mengetahui kandungan senyawa aktif dan kadar katekin pada teh. Penelitian dilaksanakan mulai bulan April sampai dengan Juni 2012 di laboratorium Pengujian Balai Penelitian Tanaman Rempah dan Obat, Bogor. Skrining fitokimia pucuk peko dengan dua daun (p+2) dilakukan berdasarkan prosedur dari Materia Medika Indonesia (MMI), sedangkan analisis katekin dengan menggunakan metode SNI gambir. Penelitian disusun berdasarkan rancangan acak lengkap (RAL), enam perlakuan dengan empat ulangan. Perlakuan yang digunakan adalah enam genotipe teh (Tbs 1, Tbs 2, Hibrid, Cin 143, Rb 3, dan Kiara 8). Hasil penelitian menunjukkan keenam genotipe yang diuji mengandung senyawa alkaloid, saponin, tanin, fenolik, flavanoid, steroid, dan glikosida. Genotipe Tbs 1, Hibrid, dan Kiara 8 positif mengandung senyawa triterpenoid, sedangkan Tbs 2, Rb 3, dan Cin 143 negatif. Genotipe Tbs 1 dan Tbs 2 memiliki kandungan katekin paling tinggi (kecuali bagian ruas+tangkai daun) dibandingkan dengan empat genotipe lainnya. Pucuk peko, daun pertama, dan daun kedua pada genotipe Tbs 1 memiliki kadar katekin masing-masing 17,92%, 11,73%, dan 14,67%, sedangkan pada genotipe Tbs 2 masing-masing 18,22%, 13,48%, dan 15,81%. Kadar katekin terendah dihasilkan oleh bagian ruas+tangkai daun pada genotipe Rb 3 (1,78%). Pucuk peko menghasilkan kandungan katekin bervariasi antara 8,36%-18,22%, lebih tinggi dibandingkan dengan daun pertama, daun kedua, dan bagian ruas + tangkai daun.</p><p>Kata kunci: Camellia sinensis, fitokimia, genotipe, katekin, pucuk peko</p><p>Phytochemical screening was intended for a preliminary evaluation of the chemical constituents of the tea (Camellia sinensis). In addition, tea also contains catechin that can be used as an indication of the quality of tea leaves. The objectives of this study were to determine the content of the active compounds and catechin in tea. The research was conducted from April to June 2012 in the Laboratory of the Research Institute for Spices and Medicinal Crops, Bogor. The phytochemical screening was performed based on the procedure of Materia Medika Indonesia (MMI), while the catechin analysis used the method of SNI gambir. The study was carried out in completely randomized design with six treatments and four replications. The treatments used are six tea genotypes namely Tbs 1, Tbs 2, Hibrid, Cin 143, Rb 3, and Kiara 8. The results showed that the six tea genotypes tested contained the compounds of alkaloid, saponin, tannin, phenolic, flavanoid, steroid, and glycoside. Positively triterpenoid compounds present in the genotype of Tbs1, Hybrids, and Kiara 8, and negative in Tbs 2, Rb 3, and Cin 143. The genotypes of Tbs 1 and Tbs 2 produced the highest catechin content compared to the other genotypes. Catechin content was lowest in the part of internodes+leaf stalk of Rb 3 (1.78%). Pecco shoots produce catechin content of about 8.36%-18.22%, higher than the first leaf, second leaf, and the parts of internodes+leaf stalk.</p>

scholarly journals Effect of Ratio of Moringa Leaves Juice with Pineapple Juice and Arabic Gum on the Quality of Jelly Candy

2018 ◽  
Vol 1 (2) ◽  
pp. 162-171 ◽  
Author(s):  
Carly Purba ◽  
Hotnida Sinaga ◽  
Mimi Nurminah
Keyword(s):  
Vitamin C ◽  
Ash Content ◽  
Total Acid ◽  
Arabic Gum ◽  
Pineapple Juice ◽  
Randomized Design ◽  
Two Factors ◽  
Soluble Solid ◽  
Completely Randomized Design

The purpose of this research was to determine the effect of ratio of moringa leaves juice with pineapple juice and the best percentage of arabic gum on the quality of jelly candy. This research was using completely randomized design with two factors, i.e. : ratio of moringa leaves juice with pineapple juice (K): (100%:0% ; 75%:25% ; 50%:50% ; 25%:75% ; 0%:100%) and arabic gum percentage (G): (1,0% ; 1,5% ; 2,0%). Parameters analyzed were moisture content, ash content, vitamin C content, total soluble solid, total acid, lightness value (L*), hedonic organoleptic values of colour, flavour, taste, texture and score organoleptic values of colour and texture. The results showed that the ratio of of moringa leaves juice with pineapple juice had highly significant effect on ash content, vitamin C content, total acid, lightness value, hedonic organoleptic test of colour, flavour, taste and score organoleptic value of colour. The ratio of  moringa leaves juice with pineapple juice (25%:75%) and 2,0% arabic gum percentage produces the best quality of jelly candy based on hedonic organoleptic values of colour, flavour, taste, texture and score organoleptic values of colour and texture.

scholarly journals Pengaruh Perbandingan Jenis Buah (Terong Belanda Dan Bit) dan Konsentrasi Carboxy Methyl Cellulose (CMC) Terhadap Mutu Organoleptik Sorbet

2016 ◽  
Vol 1 (1) ◽  
pp. 941-946
Author(s):  
Nanda Supriana ◽  
Dian Hasni ◽  
Syarifah Rohaya
Keyword(s):  
Concentration Factor ◽  
Methyl Cellulose ◽  
The Other ◽  
Carboxy Methyl Cellulose ◽  
Sour Taste ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Betalain Pigment ◽  
Carboxy Methyl

Abstrak.  Terong belanda merupakan buah berasa asam yang khas, namun memiliki warna yang kurang menarik. Disisi lain buah  bit mempunyai warna yang menarik, karena pada buah bit terkandung pigmen betalain yang dapat menghasilkan warna merah dan ungu. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh konsentrasi CMC dan penambahan buah terong belanda dan bit terhadap mutu organoleptik sorbet. Penelitian ini menggunakan Rancangan Acak Lengkap (RAL) dengan faktor perbandingan buah terong belanda dan bit (P1 = 1:1, P2 = 2:1 dan P3 = 3:1) dan konsentrasi CMC ( C1 = 0%, C2 = 0,25%,  C3 = 0,50 % dan C4 = 75 %) dengan total  24 satuan percobaan. Hasil analisis menunjukkan penambahan proporsi terong belanda cenderung meningkatkan nilai organoleptik aroma dan rasa, sedangkan peningkatan konsentrasi CMC cenderung meningkatkan nilai organoleptik warna, rasa dan tekstur. Sorbet dengan perlakuan terbaik berdasarkan analisis keseluruhan diperoleh dengan menggunakan buah terong belanda:bit(2:1) dengan respon uji hedonik untuk warna 4,53 (agak suka), aroma 4,23 (netral), rasa 4,40 (agak suka) dan tekstur 4,63 (agak suka). Abstract. Terong belanda is a sour-taste typical fruit, but it has a less attractive color. On the other hand, beetroot has an interesting color because it contains betalain pigment producing red and purple colors. The purpose of this study was to determine the effect of CMC concentration and the addition of terong belanda and beetroot on the organoleptic quality of sorbet. This study used a Completely Randomized Design (CRD) with the ratio of terong belanda and beetroot factor (P1 = 1:1, P2 = 2:1 and P3 = 3:1) and CMC concentration factor (C1 = 0%, C2 = 0.25 %, C3 = 0.50% and C4 = 75%) with two replicates creating a total of 24 experimental units. The results showed that the addition of terong belanda tended to increase the proportion of aroma and taste organoleptic values, while the increase in the concentration of CMC tended to improve the color, taste and texture organoleptic values. The best Sorbet was obtained using the ratio of terong belanda and beetroot (2:1) having the following hedonic characteristics: 4.53 (a bit like) color, 4.23 (neutral) aroma, 4.40 (rather like) flavor and 4.63 (a bit like) texture.

scholarly journals THE EFFECT OF CHICKEN FEET GELATIN TO CHARACTERISTIC OF JELLY CANDY

2021 ◽  
Vol 18 (2) ◽  
pp. 87
Author(s):  
Miskiyah Miskiyah ◽  
Juniawati Juniawati ◽  
Nur Afni Oktafia ◽  
Siti Chairiyah Batubara
Keyword(s):  
Water Content ◽  
Sugar Content ◽  
Ash Content ◽  
Reducing Sugar ◽  
Sucrose Content ◽  
Test Results ◽  
Treatment Combination ◽  
Randomized Design ◽  
Completely Randomized Design

Jelly candy is a soft textured candy processed with hydrocolloid components such as gum, pectin, agar, starch, carrageenan, gelatin. These are used to modify the chewy texture. This study aimed was to determine the effect of the combination of chicken feet gelatin and agar on the quality of jelly candy. Processing of chicken feet gelatin jelly candy based on Caeccar et.al (2018) method by modification. The study used a completely randomized design (CRD) with one factor, five levels and three replications. The factors studied were the ratio of chicken feet gelatin and agar 80:20; 60:40; 40:60; 20:80; 0:100. Product quality characteristics observed in this study were water content, ash content, reducing sugar content, sucrose content, and organoleptic quality. The results showed that the combination of chicken feet gelatine and agar were significantly affected water, ash, reducing sucrose content. Jelly candy with a treatment combination of 80% chicken feet gelatine and 20% agar was the best treatment. The results of the analysis of the candy were water content of 11.02± 0.04%, ash content of 0.89± 0.00%, reducing sugar content of 10.83± 0.01%, sucrose content of 50.68± 0.28%. The organoleptic test results showed that chicken feet gelatine improved the texture and taste of jelly candy.

Sign in / Sign up

Export Citation Format

Share Document