scholarly journals Outlier Detection for IoT devices in Indoor Situating Framework using Machine Learning Techniques and Comparison

2021 ◽  
Vol 309 ◽  
pp. 01024
Author(s):  
M. Sri Vidya ◽  
G. R. Sakthidharan
Keyword(s):  
Machine Learning ◽  
Outlier Detection ◽  
Indoor Environment ◽  
Indoor Localization ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Detection Techniques ◽  
Learning Techniques ◽  
Global Positioning ◽  
Iot Devices

Internet of Things connects various physical objects and form a network to do the services for sensing the physical things without any human intervention. They compute the data, retrieve the data by the network connections made through IoT device components such as Sensors, Protocols, Address, etc., The Global Positioning System (GPS) is used for localization in outer areas such as roads, and ground but cannot be used for Indoor environment. So, while using Indoor Environment, finding or locating an object is not possible by GPS. Therefore by using IoT devices such as Wi-Fi routers in Indoor Environment can localize the objects. It can be done by using Received Signal Strengths (RSSs) from a Wi-Fi router. But by using RSSs in Wi-Fi, there are disturbances, reflections, interferences are caused. By using Outlier detection techniques for localization can identify the objects clearly without any interruptions, noises, and irregular signal strengths. This paper produces research about Indoor Situating Environment and various techniques already used for localization and form the effective solution. The several methods used are compared and form a result to make the further computation in the Indoor Environment. The Comparison is done in order to find the effective and more accurate Machine Learning algorithms used for Indoor Localization.

Machine Learning Techniques for IoT-Based Indoor Tracking and Localization

2022 ◽  
pp. 123-145
Author(s):  
Pelin Yildirim Taser ◽  
Vahid Khalilpour Akram
Keyword(s):  
Machine Learning ◽  
Indoor Localization ◽  
Learning Algorithms ◽  
Distance Estimation ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
The Internet ◽  
Traditional Methods ◽  
Learning Techniques ◽  
Localization Systems

The GPS signals are not available inside the buildings; hence, indoor localization systems rely on indoor technologies such as Bluetooth, WiFi, and RFID. These signals are used for estimating the distance between a target and available reference points. By combining the estimated distances, the location of the target nodes is determined. The wide spreading of the internet and the exponential increase in small hardware diversity allow the creation of the internet of things (IoT)-based indoor localization systems. This chapter reviews the traditional and machine learning-based methods for IoT-based positioning systems. The traditional methods include various distance estimation and localization approaches; however, these approaches have some limitations. Because of the high prediction performance, machine learning algorithms are used for indoor localization problems in recent years. The chapter focuses on presenting an overview of the application of machine learning algorithms in indoor localization problems where the traditional methods remain incapable.

scholarly journals A Study of Machine Learning Algorithms on Email Spam Classification

10.29007/qshd ◽  
2020 ◽  
Author(s):  
N Sutta ◽  
Z Liu ◽  
X Zhang
Keyword(s):  
Machine Learning ◽  
High Accuracy ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Spam Detection ◽  
Classification Models ◽  
Detection Techniques ◽  
Learning Techniques ◽  
Comprehensive Comparison ◽  
Email Spam

Despite the fact that different techniques have been developed to filter spam, due to the spammer’s rapid adoption of new spam detection techniques, we are still overwhelmed with spam emails. Currently, machine learning techniques are the most effective ways to classify and filter spam emails. In this paper, a comprehensive comparison and analysis of the performance of various classification models on the 2007 TREC Public Spam Corpus are exhibited in various cases of without or with N- Grams as well as using separate or combined datasets. It is shown that the inclusion of the N-Grams in the pre-processing phase provides high accuracy results for classification models in most of the cases, and the models using the split approach with combined datasets give better results than models using the separate dataset.

scholarly journals Machine Learning Based Indoor Localisation Using Wi-Fi And Smartphone

10.31645/06 ◽  
2020 ◽  
Author(s):  
Zulqarnain Khokhar ◽  
◽  
Murtaza Ahmed Siddiqi ◽  
Keyword(s):  
Machine Learning ◽  
Random Forest ◽  
Decision Tree ◽  
Indoor Localization ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Smart Devices ◽  
Gradient Boosting ◽  
Learning Techniques ◽  
Indoor Localisation

Wi-Fi based indoor positioning with the help of access points and smart devices have become an integral part in finding a device or a person’s location. Wi-Fi based indoor localization technology has been among the most attractive field for researchers for a number of years. In this paper, we have presented Wi-Fi based in-door localization using three different machine-learning techniques. The three machine learning algorithms implemented and compared are Decision Tree, Random Forest and Gradient Boosting classifier. After making a fingerprint of the floor based on Wi-Fi signals, mentioned algorithms were used to identify device location at thirty different positions on the floor. Random Forest and Gradient Boosting classifier were able to identify the location of the device with accuracy higher than 90%. While Decision Tree was able to identify the location with accuracy a bit higher than 80%.

scholarly journals Efficient Cognitive Fog Computing for Classification of Network Cyberattacks Using Machine Learning

2020 ◽  
pp. 176-184
Author(s):  
A. V. Deorankar ◽  
Shiwani S. Thakare
Keyword(s):  
Machine Learning ◽  
Large Scale ◽  
Binary Classification ◽  
Fog Computing ◽  
Machine Learning Techniques ◽  
Machine Learning Classification ◽  
Detection Techniques ◽  
Learning Techniques ◽  
Iot Devices ◽  
Cloud Servers

IoT is the network which connects and communicates with billions of devices through the internet and due to the massive use of IoT devices, the shared data between the devices or over the network is not confidential because of increasing growth of cyberattacks. The network traffic via loT systems is growing widely and introducing new cybersecurity challenges since these loT devices are connected to sensors that are directly connected to large-scale cloud servers. In order to reduce these cyberattacks, the developers need to raise new techniques for detecting infected loT devices. In this work, to control over this cyberattacks, the fog layer is introduced, to maintain the security of data on a cloud. Also the working of fog layer and different anomaly detection techniques to prevent the cyberattacks has been studied. The proposed AD-IoT can significantly detect malicious behavior using anomalies based on machine learning classification before distributing on a cloud layer. This work discusses the role of machine learning techniques for identifying the type of Cyberattacks. There are two ML techniques i.e. RF and MLP evaluated on the USNW-NB15 dataset. The accuracy and false alarm rate of the techniques are assessed, and the results revealed the superiority of the RF compared with MLP. The Accuracy measures by classifiers are 98 and 53 of RF and MLP respectively, which shows a huge difference and prove the RF as most efficient algorithm with binary classification as well as multi- classification.

Using Machine Learning Algorithms on Prediction of Stock Price

2020 ◽  
Vol 12 (2) ◽  
pp. 84-99
Author(s):  
Li-Pang Chen
Keyword(s):  
Machine Learning ◽  
Stock Price ◽  
Short Term Memory ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Short Term ◽  
Learning Techniques ◽  
Historical Database ◽  
Long Short Term Memory

In this paper, we investigate analysis and prediction of the time-dependent data. We focus our attention on four different stocks are selected from Yahoo Finance historical database. To build up models and predict the future stock price, we consider three different machine learning techniques including Long Short-Term Memory (LSTM), Convolutional Neural Networks (CNN) and Support Vector Regression (SVR). By treating close price, open price, daily low, daily high, adjusted close price, and volume of trades as predictors in machine learning methods, it can be shown that the prediction accuracy is improved.

A Comparative Study of Different Machine Learning Algorithms for Disease Prediction

2017 ◽  
Vol 7 (7) ◽  
pp. 172
Author(s):  
Anantvir Singh Romana
Keyword(s):  
Machine Learning ◽  
Subsequent Treatment ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Disease Prediction ◽  
Classification Problems ◽  
Learning Techniques ◽  
Neural Network Classifiers ◽  
Diagnostic Detection

Accurate diagnostic detection of the disease in a patient is critical and may alter the subsequent treatment and increase the chances of survival rate. Machine learning techniques have been instrumental in disease detection and are currently being used in various classification problems due to their accurate prediction performance. Various techniques may provide different desired accuracies and it is therefore imperative to use the most suitable method which provides the best desired results. This research seeks to provide comparative analysis of Support Vector Machine, Naïve bayes, J48 Decision Tree and neural network classifiers breast cancer and diabetes datsets.

scholarly journals Feasibility of Machine Learning Algorithms for Predicting the Deformation of Anodic Titanium Films by Modulating Anodization Processes

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1089
Author(s):  
Sung-Hee Kim ◽  
Chanyoung Jeong
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Multiclass Classification ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Smart Manufacturing ◽  
Gradient Boosting ◽  
Experimental Conditions ◽  
Learning Techniques ◽  
Tio2 Nanostructures

This study aims to demonstrate the feasibility of applying eight machine learning algorithms to predict the classification of the surface characteristics of titanium oxide (TiO2) nanostructures with different anodization processes. We produced a total of 100 samples, and we assessed changes in TiO2 nanostructures’ thicknesses by performing anodization. We successfully grew TiO2 films with different thicknesses by one-step anodization in ethylene glycol containing NH4F and H2O at applied voltage differences ranging from 10 V to 100 V at various anodization durations. We found that the thicknesses of TiO2 nanostructures are dependent on anodization voltages under time differences. Therefore, we tested the feasibility of applying machine learning algorithms to predict the deformation of TiO2. As the characteristics of TiO2 changed based on the different experimental conditions, we classified its surface pore structure into two categories and four groups. For the classification based on granularity, we assessed layer creation, roughness, pore creation, and pore height. We applied eight machine learning techniques to predict classification for binary and multiclass classification. For binary classification, random forest and gradient boosting algorithm had relatively high performance. However, all eight algorithms had scores higher than 0.93, which signifies high prediction on estimating the presence of pore. In contrast, decision tree and three ensemble methods had a relatively higher performance for multiclass classification, with an accuracy rate greater than 0.79. The weakest algorithm used was k-nearest neighbors for both binary and multiclass classifications. We believe that these results show that we can apply machine learning techniques to predict surface quality improvement, leading to smart manufacturing technology to better control color appearance, super-hydrophobicity, super-hydrophilicity or batter efficiency.

scholarly journals Heart disease prediction using machine learning techniques : a survey

2018 ◽  
Vol 7 (2.8) ◽  
pp. 684 ◽  
Author(s):  
V V. Ramalingam ◽  
Ayantan Dandapath ◽  
M Karthik Raja
Keyword(s):  
Machine Learning ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Complex Data ◽  
Learning Techniques ◽  
Vector Machines ◽  
Supervised Learning Algorithms ◽  
Life Threatening

Heart related diseases or Cardiovascular Diseases (CVDs) are the main reason for a huge number of death in the world over the last few decades and has emerged as the most life-threatening disease, not only in India but in the whole world. So, there is a need of reliable, accurate and feasible system to diagnose such diseases in time for proper treatment. Machine Learning algorithms and techniques have been applied to various medical datasets to automate the analysis of large and complex data. Many researchers, in recent times, have been using several machine learning techniques to help the health care industry and the professionals in the diagnosis of heart related diseases. This paper presents a survey of various models based on such algorithms and techniques andanalyze their performance. Models based on supervised learning algorithms such as Support Vector Machines (SVM), K-Nearest Neighbour (KNN), NaïveBayes, Decision Trees (DT), Random Forest (RF) and ensemble models are found very popular among the researchers.

scholarly journals Toward Palmprint Recognition Methodology Based Machine Learning Techniques

2020 ◽  
Vol 4 (4) ◽  
Author(s):  
M. M. Ata ◽  
K. M. Elgamily ◽  
M. A. Mohamed
Keyword(s):  
Machine Learning ◽  
Hough Transform ◽  
Recognition Accuracy ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Supervised Machine Learning ◽  
Machine Learning Techniques ◽  
Palmprint Recognition ◽  
Feature Vectors ◽  
Learning Techniques

The presented paper proposes an algorithm for palmprint recognition using seven different machine learning algorithms. First of all, we have proposed a region of interest (ROI) extraction methodology which is a two key points technique. Secondly, we have performed some image enhancement techniques such as edge detection and morphological operations in order to make the ROI image more suitable for the Hough transform. In addition, we have applied the Hough transform in order to extract all the possible principle lines on the ROI images. We have extracted the most salient morphological features of those lines; slope and length. Furthermore, we have applied the invariant moments algorithm in order to produce 7 appropriate hues of interest. Finally, after performing a complete hybrid feature vectors, we have applied different machine learning algorithms in order to recognize palmprints effectively. Recognition accuracy have been tested by calculating precision, sensitivity, specificity, accuracy, dice, Jaccard coefficients, correlation coefficients, and training time. Seven different supervised machine learning algorithms have been implemented and utilized. The effect of forming the proposed hybrid feature vectors between Hough transform and Invariant moment have been utilized and tested. Experimental results show that the feed forward neural network with back propagation has achieved about 99.99% recognition accuracy among all tested machine learning techniques.

Sign in / Sign up

Export Citation Format

Share Document