scholarly journals Effect of Sugarcane Bagasse Fiber on Geopolymer Concrete when it is Subjected to Alternative Drying and Wetting

2021 ◽  
Vol 309 ◽  
pp. 01105
Author(s):  
T. Srinivas ◽  
Pogula Anudeep ◽  
N. V. Ramana Rao
Keyword(s):  
Compressive Strength ◽  
Sugarcane Bagasse ◽  
Strength Loss ◽  
Geopolymer Concrete ◽  
Drying Process ◽  
Coconut Fiber ◽  
Conventional Concrete ◽  
Wetting And Drying ◽  
Final Residue ◽  
Bagasse Fiber

Various types of fibers like glass, steel, coconut fiber, sugarcane bagasse fiber, etc are used to increase the mechanical properties of the concrete. SCBF is the final residue of the sugar industries which is used in this study. The objective of the paper is to study the effect of SCBF in geopolymer concrete (GPC) and conventional concrete (CC) of equivalent grade of M40 when it is subjected to alternative drying and wetting. The specimens are treated with water by alternative wetting and drying process. This test consists of periodic cycles, each cycle consists of one wetting day and drying day. The specimens are tested for the compressive strengths after 7, 14 and 28 cycles. The compressive strength of the CCF and GPCF are higher than the CC and GPC respectively and the optimum compressive strengths are obtained at 0.5% of fiber dosage. The % loss of compressive strength and % loss of weights of CCF and GPCF are calculated and compared with the CC and GPC. From the results obtained, the strength loss and the weight loss in the CCF and GPCF are less when compared to the CC and GPC when treated in alternative wetting and drying process.

scholarly journals Studies on the Permeation Properties of Geopolymer Concrete made with Sugarcane Bagasse Fiber

2021 ◽  
Vol 309 ◽  
pp. 01130
Author(s):  
Pogula Anudeep ◽  
T. Srinivas ◽  
N. V. Ramana Rao
Keyword(s):  
Sugarcane Bagasse ◽  
Geopolymer Concrete ◽  
Conventional Concrete ◽  
Time Period ◽  
Water Absorption Test ◽  
Paper Work ◽  
Bagasse Fiber ◽  
Permeation Properties ◽  
Ambient Curing ◽  
Permeation Test

Different fibers like steel, glass, basalt, coconut, sugarcane fibers are used to improve the tensile strength in the concrete. The sugarcane bagasse fiber (SCBF) is utilized in this paper work. This SCBF is the final extract of the sugar industries which contains the large fibers. The main objective of this paper is to study the effect of SCBF on the permeation properties of the geopolymer concrete (GPC) of G40 and compared to its equivalent M40 grade. The specimens of conventional concrete (CC) and conventional concrete with SBF (CCF) are casted and cured in the curing tanks for a period of 28 day, and the GPC and GPCF specimens are casted and oven cured at a temperature of 60OC for a time period of 24 hours and the test are performed after 28 days of ambient curing of the specimens. The permeation test like (Water absorption test, Sorptivity and Water Permeability test) are carried in the paper. Based on the results it is observed that the permeation properties of CCF and GPCF are more resistant when compared to the CC and GPC respectively.

scholarly journals Study of Proportional Variation of Geopolymer Concrete which Self Compacting Concrete

2019 ◽  
Vol 2 (2) ◽  
pp. 65
Author(s):  
Purwanto P. ◽  
Himawan Indarto
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Power Plant ◽  
Portland Cement ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Conventional Concrete ◽  
Basic Characteristics ◽  
Carbon Dioxide Co2 ◽  
Proportional Variation

Portland cement production process which is the conventional concrete constituent materials always has an impact on producing carbon dioxide (CO2) which will damage the environment. To maintain the continuity of development, while maintaining the environment, Portland cement substitution can be made with more environmentally friendly materials, namely fly ash. The substitution of fly ash material in concrete is known as geopolymer concrete. Fly ash is one of the industrial waste materials that can be used as geopolymer material. Fly ash is mineral residue in fine grains produced from coal combustion which is mashed at power plant power plant [15]. Many cement factories have used fly ash as mixture in cement, namely Portland Pozzolan Cement. Because fly ash contains SiO2, Al2O3, P2O3, and Fe2O3 which are quite high, so fly ash is considered capable of replacing cement completely.This study aims to obtain geopolymer concrete which has the best workability so that it is easy to work on (Workable Geopolymer Concrete / Self Compacting Geopolymer Concrete) and obtain the basic characteristics of geopolymer concrete material in the form of good workability and compressive strength. In this study, geopolymer concrete is composed of coarse aggregate, fine aggregate, fly ash type F, and activators in the form of NaOH and Na2SiO3 Be52. In making geopolymer concrete, additional ingredients such as superplastizer are added to increase the workability of geopolymer concrete. From this research, the results of concrete compressive strength above fc' 25 MPa and horizontal slump values reached 60 to 80 centimeters.

scholarly journals Deterioration and Microstructural Evolution of the Fly Ash Geopolymer Concrete against MgSO4Solution

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Tao Long ◽  
Qingyuan Wang ◽  
Zhongwei Guan ◽  
Yu Chen ◽  
Xiaoshuang Shi
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Magnesium Sulfate ◽  
Strength Loss ◽  
Sulfate Attack ◽  
Aluminum Silicate ◽  
Geopolymer Concrete ◽  
Portland Cement Concrete ◽  
Sodium Aluminum Silicate ◽  
Magnesium Aluminum Silicate

Fly ash geopolymer concrete (FAGC) and ordinary Portland cement concrete (OPCC) specimens were immersed in 5% MgSO4solution undergoing 32 wetting-drying and heating-cooling cycles. Their compressive behavior was investigated after every 8 cycles. Several microstructure analysis techniques were applied on the samples to identify the materials formed due to magnesium sulfate attack, including XRD, FTIR, SEM, and EDS. Experimental results elucidated that the compressive strength loss ratio in the heating group of FAGC was 12.7%, while that of OPCC was 17.8%, which means that FAGC had better magnesium sulfate resistance than OPCC. The compressive strength loss of OPCC was due to the formation of gypsum under the magnesium sulfate attack exposed to wetting-drying and heating-cooling cycles. The deterioration mechanisms of FAGC against MgSO4solution were discovered to be that sodium aluminum silicate hydrate (N-A-S-H) gels reacted with MgSO4, leading to the creation of low strength magnesium aluminum silicate hydrate (M-A-S-H) gels.

scholarly journals Feasibility study of compost as a partial substitute for fine aggregate in concrete

2021 ◽  
Keyword(s):  
Weight Loss ◽  
Compressive Strength ◽  
Elevated Temperature ◽  
Fine Particles ◽  
Strength Loss ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Control Specimen ◽  
Sem Image ◽  
Significant Difference

Abstract In this study, vermicompost is replaced for fine aggregate in geopolymer concrete (GPC). Initially mix design is made for GPC and mix proportion is proposed. The vermicompost is replaced at 5%, 10%, 15% and 20% with M sand in GPC. Result indicates the 5% replacement with vermicompost based geopolymer concrete (GPVC) has the compressive strength of 32 N mm−2 (M30 grade) whereas the compressive strength of control specimen made with GPC is 37 N mm−2. Other replacement shows 21 N mm−2, 14 N mm−2 and 11 N mm−2 respectively. The 5% replaced concrete cubes and control specimen are tested at an elevated temperature of 200°C, 400°C, 600°C and 800°C and compared with the control specimen. There is no significant difference observed in weight lost at control (GPC) and GPVC specimen. An elevated temperature, the weight loss is almost 4% at 200°C because of expulsion of water from the concrete. Afterwards only 2% weight loss is observed in remaining elevated temperature. The compressive strength loss is observed at an elevated temperature in GPC and GPVC specimen because of thermal incompatibility between aggregate and the binder. EDX results show M sand and compost contains Si, Al, C, Fe, Ca, Mg, Na and K and it is similar in the elemental composition and SEM image confirms vermicompost contains fine particles.

scholarly journals Kelayakan Abu Terbang PLTU Buntoi Sebagai Campuran Beton Geopolimer

2021 ◽  
Vol 9 (2) ◽  
pp. 102-108
Author(s):  
Dadang Suriyana ◽  
Liliana Sahay ◽  
Okta Meilawaty
Keyword(s):  
Compressive Strength ◽  
Strength Test ◽  
Geopolymer Concrete ◽  
Conventional Concrete ◽  
Second Stage ◽  
Compressive Strength Test ◽  
Compressive Strength Of Concrete ◽  
Maximum Compressive Strength ◽  
Geopolymer Material ◽  
Geopolymer Paste

The main basic ingredients needed for the manufacture of this geopolymer material are materials that contain a lot of silica and aluminia elements. The 1st stage test was carried out to determine the geopolymer paste with the maximum compressive strength at the ratio of NaOH to Na2SiO3 of 1; 1.5; 2; 2.5. The second stage of testing was carried out using a geopolymer paste with the highest compressive strength, namely the ratio of NaOH to Na2SiO3 of 2.5 with a compressive strength of 22.56 MPa. Based on the results of the compressive strength test, the maximum compressive strength at the age of 28 days is 7.64 MPa. The results of the compressive strength of concrete are much lower than the compressive strength of the paste, it shows that the paste does not bind too much with the aggregate. This is evidenced by the results of the compressive strength of conventional concrete which is much higher than that of geopolymer concrete using the same aggregate. With the results of the maximum compressive strength at the age of 28 days is 29.51 MPa.

scholarly journals Behavior of the self-compacting mortar with sugarcane bagasse ash in the fresh and hardened state

2019 ◽  
Vol 12 (1) ◽  
pp. 179-198
Author(s):  
V. C. SANTOS ◽  
R. D. VANDERLEI ◽  
K. K. MORAES ◽  
E. T. D. F. ROSINA ◽  
G. M. BALBINO
Keyword(s):  
Compressive Strength ◽  
Sugarcane Bagasse ◽  
Natural Sand ◽  
Conventional Concrete ◽  
Limestone Filler ◽  
Small Aggregate ◽  
Slump Flow ◽  
Fresh State ◽  
Hardened State ◽  
Sugarcane Bagasse Ash

Abstract Self-compacting concrete (SCC) is a material with high workability and moderate viscosity when compared to conventional concrete. Due to its advantages, the SCC has been investigated in the last decades and the research studies the use of new components in its structure and the search for the improvement of its performance, both in the fluid and in the hardened state. The goal of this study was to evaluate the behavior of self-compacting mortars with limestone filler and with the addition of sugarcane bagasse ash (SBA) partially replacing the small aggregate. To reach this goal, initially, a rate of replacement of natural sand by SBA was set. Afterwards, slump-flow and funnel-V tests were carried out in order to check the behavior of the mortars in the fresh state. After checking the behavior of the mortars in their fresh state, the different mix proportions that achieved the best aspects of fluidity and viscosity was selected, and, for self-compacting mortars, specimens were molded to determine tensile strength at 28 days, and compressive strength at 7 and 28 days. The experimental analyses demonstrated an increase in viscosity and reduction in fluidity with increasing content of limestone filler, facilitating the obtaining of self-compacting mortars. Regarding the performance of the material in the hardened state, the mortars showed a slight increase in tensile and compressive strength due to the filler effect of fines. It was possible to replace 40% of the small aggregate with SBA.

scholarly journals Studies on Mechanical properties of High Calcium Fly ash based sustainable Geopolymer concrete

2021 ◽  
Vol 2070 (1) ◽  
pp. 012184
Author(s):  
B Vijaya Prasad ◽  
N Anand ◽  
P D Arumairaj ◽  
M Sanath Kumar ◽  
T Dhilip ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Construction Material ◽  
Sustainable Construction ◽  
Geopolymer Concrete ◽  
Conventional Concrete ◽  
High Calcium ◽  
Major Interest ◽  
High Calcium Fly Ash

Abstract Geopolymer concrete (GPC) is a Sustainable construction material, in which cement is completely replaced by Fly ash as binder. To control emission of CO2 during the production of cement, it is advisable to use alternate sustainable Cementitious material. The development of GPC become a major interest to use for in-situ and precast applications. The present study aims to develop High calcium fly ash based GPC with aid of alkaline liquids such as sodium Hydroxide (NaOH) and Sodium silicate (Na2SiO3). Different molarities i.e 4M, 6M, 8M and 10M are used to develop the GPC under ambient and oven curing process. In the present investigation the Fresh properties of GPC and Mechanical properties such as compressive strength, Tensile strength, Flexural strength and Elastic modulus of GPC are investigated. An increase of alkaline activator in in the mix decreased the workability of GPC. The developed GPC mix of 8M is found to be the optimum for gain in compressive strength. A polynomial relationship is obtained for the mechanical properties of GPC developed under ambient and oven curing. The development cost of GPC can be reduced up to 11.25 to 16.5% as compared with conventional concrete grade of M25.

scholarly journals Study on Setting & Strength Characteristic of GGBS based Geopolymer Concrete by Blending of Fly Ash and Metakaoline

2020 ◽  
Vol 13 (1) ◽  
pp. 117-122
Author(s):  
Addepalli Mallinadh Kashyap ◽  
Tanimki Chandra Sekhar Rao ◽  
N.V. Ramana Rao
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Portland Cement ◽  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Setting Time ◽  
Engineering Properties ◽  
Geopolymer Concrete ◽  
Conventional Concrete ◽  
New Material

Carbon dioxide is liberated in huge amounts by the manufacturing of Portland Pozzolana Cement. Normally, conventional concrete is manufactured with Portland cement, which acts as a binder. The production of cement emits CO2 into the atmosphere, which is a green house gas and causes the environmental pollution. Considering this as a serious environmental problem, there is a need to develop sustainable alternatives to Portland cement utilizing the industrial byproducts such as fly ash, ground granulated blast furnace slag and Metakaoline which are pozzolonic in nature. It has been established that fly ash can replace cement partially. In this context, a new material was developed known as ‖Geopolymer‖. In this study, the various parameters on the short term engineering properties of fresh and hardened properties of Geopolymer Mortar were studied. In the present investigation, cement is replaced by geopolymer source material and water is replaced by alkaline activator consisting of Sodium Silicate and Sodium Hydroxide of molarity (12M). The ratio of sodium silicate to sodium hydroxide adopted was 2.5. The test results showed that final setting time decreases as the GGBS content in the mix increases and also increase in compressive strength. Where as in the case of metakaoline, as the content increases, there is a decrease in compressive strength and setting times of the geopolymer concrete.

scholarly journals Effect of Partial Replacement of Ground Granulated Blast Furnace Slag with Sugarcane Bagasse Ash as Source Material in the Production of Geopolymer Concrete

2020 ◽  
Vol 26 (4) ◽  
pp. 477-481
Author(s):  
Parthiban KATHIRVEL ◽  
Murali GUNASEKARAN ◽  
Sreenath SREEKUMARAN ◽  
Arathi KRISHNA
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Sugarcane Bagasse ◽  
Blast Furnace Slag ◽  
Source Material ◽  
Geopolymer Concrete ◽  
Replacement Level ◽  
Granulated Blast Furnace Slag ◽  
Sugarcane Bagasse Ash ◽  
Furnace Slag

The study on the characteristics of geopolymer concrete (GPC) is of ultimate significance to instill assurance in builders and engineers. Abundant available literatures point towards the utilization of fly ash and ground granulated blast furnace slag (GGBFS) as source material in the production of GPC with little on other materials. India produces nearly 350 MMT of sugarcane for the production of sugar, which lies second only to Brazil in the annual production, the disposal of the bagasse creates an environmental issue needs to be effectively utilized. Hence, this work was intended to investigate the effect of utilizing sugarcane bagasse ash (SCBA) as a source material in the production of geopolymer mixes. The fresh (consistency, setting time, soundness and flow), hardened (density, compressive strength, expansion and pH) and microstructural properties (X-ray diffraction) of the tested mixes were asessed. The results infer that 20 % replacement level of GGBFS with SCBA produces superior compressive strength and all other results were within the permissible limits even at 40 % replacement level.

Sign in / Sign up

Export Citation Format

Share Document