scholarly journals A New Explanation for the Color Variety of Photons

2018 ◽  
Vol 186 ◽  
pp. 01003 ◽  
Author(s):  
Gh. Saleh ◽  
M. J. Faraji ◽  
R. Alizadeh ◽  
A. Dalili
Keyword(s):  
Three Dimensional ◽  
Photoelectric Effect ◽  
True Motion ◽  
Wave Particle Duality ◽  
Order Of Magnitude ◽  
Energy Formula ◽  
New Type ◽  
Unique Definition ◽  
Definition Of ◽  
New Formula

This new explanation is based on Wave-Particle Duality and Newtonian Laws and represents a unique definition of a three-dimensional motion for the photon, whose dual behavior is partly explained by the double-slit experiment of Thomas Young, who represents the photon's motion as a wave, and by the Photoelectric effect, in which the photon is considered as a particle. However, for scientists, the photon's true motion is unclear. In this article, we define a new type of motion for photons to solve both this ambiguity and the difficulty of presenting a three-dimensional trajectory for the photon's motion, and present a new formula to calculate its energy. In addition, because we believe in the helical motion of photons, where r is the gyroradius, we believe that their color is an effect of the order of magnitude of r. We present real examples that prove our energy formula.

A Study on Motions and Connector Loads for a New Type of Two-Module Semi-Submersible

2019 ◽  
Author(s):  
Jun Ding ◽  
Chao Tian ◽  
Yuji Miao ◽  
Zhengwei Zhang ◽  
Zhanhua Zhao ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Element Model ◽  
Short Term ◽  
Term Forecast ◽  
Dimensional Finite Element ◽  
Order Of Magnitude ◽  
New Type ◽  
The Subject ◽  
Three Dimensional Finite Element ◽  
Marine Platform

Abstract The hydrodynamic model and three-dimensional finite element model of a new type of two-module marine platform were built for the subject of research. The motions and connector loads were predicted based on the COMPASS THAFTS software and the results were in agreement with the model tests. It shows that the new type platform has a good sea keeping performance. On the other hand, the short-term forecast results indicate that the connector loads, Fz, is larger than other two directions, approaching 200t. The connector loads, Fx and Fy, are usually in the order of magnitude of tens tons. Some useful conclusions obtained in this paper can provide an important reference for the optimal design and construction of the new type platform and its connector system.

New Type of PPP-S[T]-PPP Hybrid Cubic Manipulator

2011 ◽  
Vol 181-182 ◽  
pp. 516-521
Author(s):  
Jian Guo Luo ◽  
Jian You Han
Keyword(s):  
Three Dimensional ◽  
Influential Factors ◽  
Degree Of Freedom ◽  
Output Shaft ◽  
Topological Graph ◽  
Rotational Angle ◽  
Working Space ◽  
Hybrid Mechanism ◽  
New Type ◽  
Definition Of

A new type of hybrid cubic manipulator with six degree of freedom(DOF) suggested based on traditional serial manipulator and parallel manipulator, three dimensional translation and rotation of output shaft obtained through lineal driving. Define the description of spacial moving capability of common couples and translation base and rotation base of mechanism, based on the fact of mechanism consists of components, a new description method by topological graph theory of components relationship suggested, new description of serial mechanism and parallel mechanism and hybrid mechanism obtained with this method, description elements include component pane and constrained component pane and component relationship line and constrained component relationship line and spacial relative moving capability between adjacent components. DOF(degree of freedom) of hybrid mechanism analysised with example based on the definition of dimensionity of branch spacial moving capability and mechanism spacial moving capability, necessary and sufficient condition of nonsingularity of mechanism presented. Method of analytic geometry used to find the regular cuboid of the reachable working space shape of mechanism, the volume of the reachable working space rest with the limit of translation of couplers, its influential factors obtained, still the rotational angle limits of output shaft at given configuration analysised through the method of drawing, and limit length of guideway etc. are the primary influential factors.

scholarly journals New Type Direction Curves in 3-Dimensional Compact Lie Group

Symmetry ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 387 ◽  
Author(s):  
Ali Çakmak
Keyword(s):  
Lie Group ◽  
Three Dimensional ◽  
Normal Direction ◽  
General Definition ◽  
Compact Lie Group ◽  
3 Dimensional ◽  
New Type ◽  
Definition Of

In this paper, new types of associated curves, which are defined as rectifying-direction, osculating-direction, and normal-direction, in a three-dimensional Lie group G are achieved by using the general definition of the associated curve, and some characterizations for these curves are obtained. Additionally, connections between the new types of associated curves and the curves, such as helices, general helices, Bertrand, and Mannheim, are given.

scholarly journals Autonomiczni Nacjonaliści . Próba zewnątrz- i wewnątrzsystemowej charakterystyki subkultury politycznej reprezentującej nowy typ nacjonalizmu

2021 ◽  
Vol 64 (4 (248)) ◽  
pp. 25-54
Author(s):  
Marcin Pielużek
Keyword(s):  
Corpus Linguistics ◽  
The Political ◽  
Left Wing ◽  
Far Right ◽  
Information Platform ◽  
Organisational Form ◽  
New Type ◽  
Definition Of ◽  
Tools And Techniques ◽  
New Formula

Autonomous Nationalists. An Attempt of the Extra- and Intra-Systemic Characteristic of the Political Subculture Representing a New Type of Nationalism The main aim of the article is to portray a new far-right phenomenon of Autonomous Nationalists political subculture. The groups established in early 2000s are characterised on one hand by a subcultural organisational form modelled on the Antifa anarchist movement. On the other hand, they exemplify typical postmodernist „liquid ideologies”, in which the extreme right postulates are combined with a new formula of a internationalist, “non-chau­vinist” nationalism and left-wing optics. The article consists of two parts. The first presents the extra-systemic optics – an attempt to describe this milieu and locate it in the nationalist ideological spectrum was made based on the available scientific sources. The second part attempts to capture the self-definition of Autonomous Nationalists in their media and iden­tify the key values for this milieu. This part employs quantitative and qualitative analyses carried out with the use of corpus linguistics tools and techniques. The research material consisted of ideological texts published on the Autonom.pl website, the leading information platform of these circles. The article is intended to promote media research of subcultural groups and groups operating on the periphery of the political system. STRESZCZENIE Głównym celem artykułu jest próba charakterystyki nowego zjawiska obecnego na skrajnie prawicowej scenie politycznej, jakim jest subkultura polityczna Autonomicznych Nacjonalistów. Powstałe w pierwszej dekadzie XXI w. grupy cechuje z jednej strony subkulturowa forma organizacyjna, wzorowana na anarchistycznych bojówkach Antifa, z drugiej stanowią one egzemplifikację typowej dla postmodernizmu „płynnej ideologii”, w ramach której łączone są typowe dla skrajnej prawicy postulaty z nową formułą internacjonalistycznego, „nieszowinistycznego” nacjonalizmu i lewicową optyką. Artykuł składa się z dwóch części. W pierwszej zaprezentowano optykę zewnątrzsystemową, w której podjęto próbę opisania tego środowiska i ulokowania go w nacjonalistycznym spektrum ideologicznym w oparciu o dostępne źródła naukowe. Druga część stanowi próbę uchwycenia autodefiniowania się polskich Autonomicznych Nacjonalistów w swoich mediach oraz identyfikacji kluczowych dla tego środowiska wartości. W tej części wykorzystano ilościowo-jakościowe analizy reali­zowane z wykorzystaniem narzędzi i technik lingwistyki korpusowej. Jako materiał badawczy zostały wybrane teksty ideologiczne opublikowane na stronie Autonom.pl pełniącej funkcję głównej tuby propagandowej tych środowisk. Artykuł stanowi wkład w badania mediów grup subkulturowych i funkcjonujących na peryferiach systemu politycznego.

Application of high-resolution field-emission LVSEM, backscatter imaging, immunogold staining to definition of the spatial distributions of two human neutrophil adherence receptors

1993 ◽  
Vol 51 ◽  
pp. 36-37
Author(s):  
Robert D. Nelson ◽  
Sharon R. Hasslen ◽  
Stanley L. Erlandsen
Keyword(s):  
Cell Surface ◽  
Surface Membrane ◽  
Three Dimensional ◽  
Human Neutrophils ◽  
Spatial Distributions ◽  
Immunogold Staining ◽  
Functional Control ◽  
Neutrophil Adherence ◽  
Definition Of ◽  
Mode Of Attachment

Receptors are commonly defined in terms of number per cell, affinity for ligand, chemical structure, mode of attachment to the cell surface, and mechanism of signal transduction. We propose to show that knowledge of spatial distribution of receptors on the cell surface can provide additional clues to their function and components of functional control.L-selectin and Mac-1 denote two receptor populations on the neutrophil surface that mediate neutrophil-endothelial cell adherence interactions and provide for targeting of neutrophil recruitment to sites of inflammation. We have studied the spatial distributions of these receptors using LVSEM and backscatter imaging of isolated human neutrophils stained with mouse anti-receptor (primary) antibody and goat anti-mouse (secondary) antibody conjugated to 12 nm colloidal gold. This combination of techniques provides for three-dimensional analysis of the expression of these receptors on different surface membrane domains of the neutrophil: the ruffles and microvilli that project from the cell surface, and the cell body between these projecting structures.

Detection, Averaging, and 3D Reconstruction of Biological Specimens on Hypercubes (Transputer-based) Computers

1990 ◽  
Vol 48 (1) ◽  
pp. 454-455
Author(s):  
Jose-Maria Carazo ◽  
I. Benavides ◽  
S. Marco ◽  
J.L. Carrascosa ◽  
E.L. Zapata
Keyword(s):  
3D Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Software Tools ◽  
Mapping Method ◽  
Computer Architectures ◽  
Parallel Computer ◽  
Reconstruction Process ◽  
Computing Power ◽  
Order Of Magnitude

Obtaining the three-dimensional (3D) structure of negatively stained biological specimens at a resolution of, typically, 2 - 4 nm is becoming a relatively common practice in an increasing number of laboratories. A combination of new conceptual approaches, new software tools, and faster computers have made this situation possible. However, all these 3D reconstruction processes are quite computer intensive, and the middle term future is full of suggestions entailing an even greater need of computing power. Up to now all published 3D reconstructions in this field have been performed on conventional (sequential) computers, but it is a fact that new parallel computer architectures represent the potential of order-of-magnitude increases in computing power and should, therefore, be considered for their possible application in the most computing intensive tasks.We have studied both shared-memory-based computer architectures, like the BBN Butterfly, and local-memory-based architectures, mainly hypercubes implemented on transputers, where we have used the algorithmic mapping method proposed by Zapata el at. In this work we have developed the basic software tools needed to obtain a 3D reconstruction from non-crystalline specimens (“single particles”) using the so-called Random Conical Tilt Series Method. We start from a pair of images presenting the same field, first tilted (by ≃55°) and then untilted. It is then assumed that we can supply the system with the image of the particle we are looking for (ideally, a 2D average from a previous study) and with a matrix describing the geometrical relationships between the tilted and untilted fields (this step is now accomplished by interactively marking a few pairs of corresponding features in the two fields). From here on the 3D reconstruction process may be run automatically.

Scanning-tunneling spectroscopy on conjugated polymer films

2003 ◽  
Vol 771 ◽  
Author(s):  
M. Kemerink ◽  
S.F. Alvarado ◽  
P.M. Koenraad ◽  
R.A.J. Janssen ◽  
H.W.M. Salemink ◽  
...  
Keyword(s):  
Polymer Films ◽  
Conjugated Polymer ◽  
Three Dimensional ◽  
Field Enhancement ◽  
Direct Consequence ◽  
Scanning Tunneling Spectroscopy ◽  
Tunneling Spectroscopy ◽  
Band Alignment ◽  
Scanning Tunneling ◽  
Order Of Magnitude

AbstractScanning-tunneling spectroscopy experiments have been performed on conjugated polymer films and have been compared to a three-dimensional numerical model for charge injection and transport. It is found that field enhancement near the tip apex leads to significant changes in the injected current, which can amount to more than an order of magnitude, and can even change the polarity of the dominant charge carrier. As a direct consequence, the single-particle band gap and band alignment of the organic material can be directly obtained from tip height-voltage (z-V) curves, provided that the tip has a sufficiently sharp apex.

scholarly journals Proposing 3D Thermal Technology for Heritage Building Energy Monitoring

2021 ◽  
Vol 13 (8) ◽  
pp. 1537
Author(s):  
Antonio Adán ◽  
Víctor Pérez ◽  
José-Luis Vivancos ◽  
Carolina Aparicio-Fernández ◽  
Samuel A. Prieto
Keyword(s):  
Computer Vision ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Building Energy ◽  
Energy Monitoring ◽  
3D Computer Vision ◽  
Building Monitoring ◽  
Heritage Buildings ◽  
Heritage Building ◽  
Definition Of

The energy monitoring of heritage buildings has, to date, been governed by methodologies and standards that have been defined in terms of sensors that record scalar magnitudes and that are placed in specific positions in the scene, thus recording only some of the values sampled in that space. In this paper, however, we present an alternative to the aforementioned technologies in the form of new sensors based on 3D computer vision that are able to record dense thermal information in a three-dimensional space. These thermal computer vision-based technologies (3D-TCV) entail a revision and updating of the current building energy monitoring methodologies. This paper provides a detailed definition of the most significant aspects of this new extended methodology and presents a case study showing the potential of 3D-TCV techniques and how they may complement current techniques. The results obtained lead us to believe that 3D computer vision can provide the field of building monitoring with a decisive boost, particularly in the case of heritage buildings.

scholarly journals Effect of the Reynolds Number and Clearance Flow on the Aerodynamic Characteristics of a New Variable Inlet Guide Vane

Aerospace ◽  
2021 ◽  
Vol 8 (7) ◽  
pp. 172
Author(s):  
Hengtao Shi
Keyword(s):  
Reynolds Number ◽  
Guide Vane ◽  
Three Dimensional ◽  
High Growth ◽  
Aerodynamic Characteristics ◽  
Inlet Guide Vane ◽  
Separation Region ◽  
Clearance Flow ◽  
New Type ◽  
Variable Inlet Guide Vane

Recently, a new type of low-loss variable inlet guide vane (VIGV) was proposed for improving a compressor’s performance under off-design conditions. To provide more information for applications, this work investigated the effect of the Reynolds number and clearance flow on the aerodynamic characteristics of this new type of VIGV. The performance and flow field of two representative airfoils with different chord Reynolds numbers were studied with the widely used commercial software ANSYS CFX after validation was completed. Calculations indicate that, with the decrease in the Reynolds number Rec, the airfoil loss coefficient ω and deviation δ first increase slightly and then entered a high growth rate in a low range of Rec. Afterwards, a detailed boundary-layer analysis was conducted to reveal the flow mechanism for the airfoil performance degradation with a low Reynolds number. For the design point, it is the appearance and extension of the separation region on the rear portion; for the maximum incidence point, it is the increase in the length and height of the separation region on the former portion. The three-dimensional VIGV research confirms the Reynolds number effect on airfoils. Furthermore, the clearance leakage flow forms a strong stream-wise vortex by injection into the mainflow, resulting in a high total-pressure loss and under-turning in the endwall region, which shows the potential benefits of seal treatment.

Sign in / Sign up

Export Citation Format

Share Document