scholarly journals Mathematical simulation of thermal state of digital current and voltage transformer in unfavourable weather conditions

2018 ◽  
Vol 194 ◽  
pp. 01021 ◽  
Author(s):  
Elena E. Gotovkina ◽  
Grigory I. Parfenov ◽  
Nikolay N. Smirnov ◽  
Vladimir D. Lebedev ◽  
Vladimir V. Tyutikov

This study examines issues relating to heat exchange between an innovative 6(10) kV current and voltage transformer (and its components) and its environment in unfavourable weather conditions. Existing designs of digital current and voltage transformers are featured in systems of commercial and technical electric power accounting, and also relay protection and automation. We have presented the results of mathematical simulation of the thermal state of both a single resistor included in our measuring device, and the digital transformer as a whole. Simulation was performed using the finite element method. We have taken into account the impact of such factors as direct and diffused solar radiation, high ambient temperatures and various voltage levels on the thermal state of the functioning equipment. To verify the developed mathematical model we have presented the results of a series of experiments conducted in a high-voltage environmental chamber. Our study conclusively shows that voltage, insolation and ambient temperature significantly affect the thermal state of a functioning current and voltage transformer.

2013 ◽  
Vol 368-370 ◽  
pp. 756-759
Author(s):  
Jing Ma ◽  
Wen Sheng Chen ◽  
Xue Feng Hu

Based on the Finite Element Method ,a model has been built to study the impact of rigid pile composite foundation with lateral unloading,then obtained a conclusion about the horizontal displacement during excavating.


2018 ◽  
Vol 178 ◽  
pp. 09006 ◽  
Author(s):  
Sergey Litvinov ◽  
Vladimir Lebedev ◽  
Nikolay Smirnov ◽  
Vladimir Tyutikov ◽  
Sergey Shuvalov

This study examines the results of thermal and aerodynamic tests of a digital combined current and voltage transformer conducted in an environmental chamber. This measuring instruments consist of current and voltage transformers, featuring a resistive divider, and are used for commercial and technical electric power accounting. Different ambient temperatures, airflow rates and levels of insolation were set for the environmental chamber, with simulation of transformer functioning in emergency modes. It was established that heat release at transformer outer surface with natural convection depends to a larger extent on the difference between the temperature at the transformer surface and ambient temperature, while with forced convection this heat release depends more on air mass speed, with greater heat release on the surface of an upward facing rib than on the surface of a downward facing rib. The results of our study have been used in developing algorithms for diagnostics of the thermal state of digital combined transformers.


2018 ◽  
Vol 194 ◽  
pp. 01035 ◽  
Author(s):  
Sergey N. Litvinov ◽  
Vladimir D. Lebedev ◽  
Nikolay N. Smirnov ◽  
Vladimir V. Tyutikov ◽  
Ilkhom B. Makhsumov

This study examines the results of thermal tests on a 6(10) kV digital combined current and voltage transformer conducted in an environmental chamber. This measuring instrument consists of current and voltage transformers, featuring a resistive divider, and is used for commercial and technical electric power accounting. Ambient temperatures and levels of insolation on the transformer surface were set for the environmental chamber, with simulation of voltage transformer functioning in normal and emergency modes. We determined the time needed for the thermodynamic system to move to steady heat exchange mode, and also the final temperatures in the lower resistors and on the surface of the voltage transformer insulation cover. The results of our study have been used in developing algorithms for self-diagnostics of the thermal state of a digital combined transformer.


2011 ◽  
Vol 490 ◽  
pp. 106-118 ◽  
Author(s):  
Ryszard Jasiński

In many machines and devices there are hydraulic drives. They should operate well in various weather conditions, also in low ambient temperatures. Some malfunctions may occur during operation of hydraulic system in a so called “thermal shock condition”, which happens when frozen hydraulic component (e.g. hydraulic pump, motor or directional spool valve) is suddenly supplied with hot oil. Transient thermal state emerges in these conditions. Particular elements of component warm up differently. This results in different thermal expansion of components during warm up, which is changing the size of clearance between cooperating elements. Experimental tests of hydraulic components in low ambient temperatures were conducted in the hydraulic laboratory of the Faculty of Mechanical Engineering of Gdansk University of Technology. They concerned: orbital motors, satellite motors, gear pumps, spool valves (also proportional), piston pumps, and hydraulic cylinders. It was proved, that in thermal shock conditions some malfunctions may occur, especially with large temperature differences between oil and component. Based on results of the tests of hydraulic components and systems start-up in low ambient temperatures, one can perform a change in components design, change the type of material of components elements, and even prepare a proper procedure to be followed during start-up of cold hydraulic components and systems. In the article discusses some designs of hydraulic components resistant to thermal shock, and how to prepare components to work in low temperatures, e.g. by providing system with an additional heater to ensure uniform heating of elements in components. Change in design of hydraulic components resistant to thermal shock conditions can be obtained through computer simulation method. Analytic and computer simulation methods can be used by engineers who design machines and devices that work in low ambient temperatures.


2020 ◽  
pp. 28-33
Author(s):  
Valery Genadievich Popov ◽  
Andrey Vladimirovich Panfilov ◽  
Yuriy Vyacheslavovich Bondarenko ◽  
Konstantin Mikhailovich Doronin ◽  
Evgeny Nikolaevih Martynov ◽  
...  

The article analyzes the experience of the impact of the system of forest belts and mineral fertilizers on the yield of spring wheat, including on irrigated lands. Vegetation irrigation is designed to maintain the humidity of the active soil layer from germination to maturation at the lower level of the optimum-70-75%, and in the phases of tubulation-earing - flowering - 75-80% NV. However, due to the large differences in zones and microzones of soil and climate conditions and due to the weather conditions of individual years, wheat irrigation regimes require a clear differentiation. In the Volga region in the dry autumn rainfalls give the norm of 800-1000 m3/ha, and in saline soils – 1000-1300 and 3-4 vegetation irrigation at tillering, phases of booting, earing and grain formation the norm 600-650 m3/ha. the impact of the system of forest belts, mineral fertilizers on the yield of spring wheat is closely tied to the formation of microclimate at different distances from forest edges.


Author(s):  
Lily N Edwards-Callaway ◽  
M Caitlin Cramer ◽  
Caitlin N Cadaret ◽  
Elizabeth J Bigler ◽  
Terry E Engle ◽  
...  

ABSTRACT Shade is a mechanism to reduce heat load providing cattle with an environment supportive of their welfare needs. Although heat stress has been extensively reviewed, researched, and addressed in dairy production systems, it has not been investigated in the same manner in the beef cattle supply chain. Like all animals, beef cattle are susceptible to heat stress if they are unable to dissipate heat during times of elevated ambient temperatures. There are many factors that impact heat stress susceptibility in beef cattle throughout the different supply chain sectors, many of which relate to the production system, i.e. availability of shade, microclimate of environment, and nutrition management. The results from studies evaluating the effects of shade on production and welfare are difficult to compare due to variation in structural design, construction materials used, height, shape, and area of shade provided. Additionally, depending on operation location, shade may or may not be beneficial during all times of the year, which can influence the decision to make shade a permanent part of management systems. Shade has been shown to lessen the physiologic response of cattle to heat stress. Shaded cattle exhibit lower respiration rates, body temperatures, and panting scores compared to un-shaded cattle in weather that increases the risk of heat stress. Results from studies investigating the provision of shade indicate that cattle seek shade in hot weather. The impact of shade on behavioral patterns is inconsistent in the current body of research, some studies indicating shade provision impacts behavior and other studies reporting no difference between shaded and un-shaded groups. Analysis of performance and carcass characteristics across feedlot studies demonstrated that shaded cattle had increased ADG, improved feed efficiency, HCW, and dressing percentage when compared to cattle without shade. Despite the documented benefits of shade, current industry statistics, although severely limited in scope, indicate low shade implementation rates in feedlots and data in other supply chain sectors do not exist. Industry guidelines and third party on-farm certification programs articulate the critical need for protection from extreme weather but are not consistent in providing specific recommendations and requirements. Future efforts should include: updated economic analyses of cost versus benefit of shade implementation, exploration of producer perspectives and needs relative to shade, consideration of shade impacts in the cow-calf and slaughter plant segments of the supply chain, and integration of indicators of affective (mental) state and preference in research studies to enhance the holistic assessment of cattle welfare.


Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 863 ◽  
Author(s):  
Weiqing Huang ◽  
Mengxin Sun

A piezoelectric actuator using a lever mechanism is designed, fabricated, and tested with the aim of accomplishing long-travel precision linear driving based on the stick-slip principle. The proposed actuator mainly consists of a stator, an adjustment mechanism, a preload mechanism, a base, and a linear guide. The stator design, comprising a piezoelectric stack and a lever mechanism with a long hinge used to increase the displacement of the driving foot, is described. A simplified model of the stator is created. Its design parameters are determined by an analytical model and confirmed using the finite element method. In a series of experiments, a laser displacement sensor is employed to measure the displacement responses of the actuator under the application of different driving signals. The experiment results demonstrate that the velocity of the actuator rises from 0.05 mm/s to 1.8 mm/s with the frequency increasing from 30 Hz to 150 Hz and the voltage increasing from 30 V to 150 V. It is shown that the minimum step distance of the actuator is 0.875 μm. The proposed actuator features large stroke, a simple structure, fast response, and high resolution.


Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1226
Author(s):  
Beatriz Fraga-De Cal ◽  
Antonio Garrido-Marijuan ◽  
Olaia Eguiarte ◽  
Beñat Arregi ◽  
Ander Romero-Amorrortu ◽  
...  

Prefabricated solutions incorporating thermal insulation are increasingly adopted as an energy conservation measure for building renovation. The InnoWEE European project developed three technologies from Construction and Demolition Waste (CDW) materials through a manufacturing process that supports the circular economy strategy of the European Union. Two of them consisted of geopolymer panels incorporated into an External Thermal Insulation Composite System (ETICS) and a ventilated façade. This study evaluates their thermal performance by means of monitoring data from three pilot case studies in Greece, Italy, and Romania, and calibrated building simulation models enabling the reliable prediction of energy savings in different climates and use scenarios. Results showed a reduction in energy demand for all demo buildings, with annual energy savings up to 25% after placing the novel insulation solutions. However, savings are highly dependent on weather conditions since the panels affect cooling and heating loads differently. Finally, a parametric assessment is performed to assess the impact of insulation thickness through an energy performance prediction and a cash flow analysis.


Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1241
Author(s):  
Stanko Vršič ◽  
Marko Breznik ◽  
Borut Pulko ◽  
Jesús Rodrigo-Comino

Earthworms are key indicators of soil quality and health in vineyards, but research that considers different soil management systems, especially in Slovenian viticultural areas is scarce. In this investigation, the impact of different soil management practices such as permanent green cover, the use of herbicides in row and inter-row areas, use of straw mulch, and shallow soil tillage compared to meadow control for earthworm abundance, were assessed. The biomass and abundance of earthworms (m2) and distribution in various soil layers were quantified for three years. Monitoring and a survey covering 22 May 2014 to 5 October 2016 in seven different sampling dates, along with a soil profile at the depth from 0 to 60 cm, were carried out. Our results showed that the lowest mean abundance and biomass of earthworms in all sampling periods were registered along the herbicide strip (within the rows). The highest abundance was found in the straw mulch and permanent green cover treatments (higher than in the control). On the plots where the herbicide was applied to the complete inter-row area, the abundance of the earthworm community decreased from the beginning to the end of the monitoring period. In contrast, shallow tillage showed a similar trend of declining earthworm abundance, which could indicate a deterioration of soil biodiversity conditions. We concluded that different soil management practices greatly affect the soil’s environmental conditions (temperature and humidity), especially in the upper soil layer (up to 15 cm deep), which affects the abundance of the earthworm community. Our results demonstrated that these practices need to be adapted to the climate and weather conditions, and also to human impacts.


Sign in / Sign up

Export Citation Format

Share Document