scholarly journals Structure and magnetic properties of Co-Zn substituted hexagonal ferrites

2018 ◽  
Vol 197 ◽  
pp. 02007
Author(s):  
Erfan Handoko ◽  
Anggoro B S ◽  
Iwan Sugihartono ◽  
Mangasi AM ◽  
Dini Siti Nurwulan ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Hexagonal Ferrites ◽  
X Ray Diffraction ◽  
Small Particles ◽  
Scanning Electron Microscopy Micrographs ◽  
Ceramic Method ◽  
X Ray ◽  
Structural And Magnetic Properties ◽  
Substitutional Effect

In In this study to understand the substitutional effect of Co-Zn on structural and magnetic properties of the BaFe12-2xCoxZnxO19 M-type hexagonal ferrites with concentration (x= 0.0, 0.2, 0.4, 0.6, 0.8, 1.0) were synthesized by the ceramic method. The results of x-ray diffraction show polycrystalline with single phase. Scanning electron microscopy micrographs shows the hexagonal ferrites that are composed of small particles with large porosity, roughly of spherical shapes. The substitution of Fe3+ ion by Co2+ and Zn2+ has changed magnetic properties of hexagonal ferrites.

Magnetic and Magnetostrictive Properties of Tb-Dy-Ho-Fe-Co Alloys

2009 ◽  
Vol 152-153 ◽  
pp. 7-10 ◽  
Author(s):  
Irina S. Tereshina ◽  
S.A. Nikitin ◽  
G.A. Politova ◽  
A.S. Ilyushin ◽  
A.A. Opolenko ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Magnetic Properties ◽  
Rare Earth ◽  
Applied Magnetic Field ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Standard Strain ◽  
X Ray ◽  
Structural And Magnetic Properties ◽  
Co Alloys

In this work, the structural and magnetic properties of single-phase TbxDyyHoz(Fe,Co)2 (x + y + z = 1) alloys have been investigated by means of X-ray diffraction, 57Fe Mossbauer spectroscopy, magnetization measurements and a standard strain gage technique. The magnetostriction of TbxDyyHoz(Fe,Co)2 was examined against an applied magnetic field up to 10 kOe in 80 - 400 K temperature range. The Co-containing compounds are found to have high values of magnetostrictive susceptibility due to compensation of magnetic anisotropy in both the rare-earth and 3d transition metals sublattices.

Structural and Magnetic Hysteresis Properties of Co-Zr Substituted Hexagonal Barium Ferrites

2015 ◽  
Vol 7 (1) ◽  
pp. 1346-1351
Author(s):  
Ch.Gopal Reddy ◽  
Ch. Venkateshwarlu ◽  
P. Vijaya Bhasker Reddy
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Magnetic Hysteresis ◽  
Grain Morphology ◽  
Hexagonal Structure ◽  
Ion Composition ◽  
X Ray Diffraction ◽  
Ceramic Method ◽  
Barium Ferrites ◽  
Xrd Patterns

Co-Zr substituted M-type hexagonal barium ferrites, with chemical formula BaCoxZrxFe12-2xO19 (where x = 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0), have been synthesized by double sintering ceramic method. The crystallographic properties, grain morphology and magnetic properties of these ferrites have been investigated by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM). The XRD patterns confirm the single phase with hexagonal structure of prepared ferrites. The magnetic properties have been investigated as a function of Co and Zr ion composition at an applied field in the range of 20 KOe. These studies indicate that the saturation magnetization (Ms) in the samples increases initially up to the Co-Zr composition of x=0.6 and decreases thereafter. On the other hand, the coercivity (Hc) and Remanent magnetization (Mr) are found to decrease continuously with increasing Co-Zr content. This property is most useful in permanent magnetic recording. The observed results are explained on the basis of site occupation of Co and Zr ions in the samples.

scholarly journals Influence of Li2CO3 addition on electrical and magnetic properties of Ni0.6Mg0.4Fe2O4

2020 ◽  
Vol 10 (03) ◽  
pp. 2050003
Author(s):  
M. R. Hassan ◽  
M. T. Islam ◽  
M. N. I. Khan
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Low Frequency ◽  
Solid State Reaction Method ◽  
Charge Carriers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrical And Magnetic Properties ◽  
Frequency Regime ◽  
Xrd Patterns

In this research, influence of adding Li2CO3 (at 0%, 2%, 4%, 6%) on electrical and magnetic properties of [Formula: see text][Formula: see text]Fe2O4 (with 60% Ni and 40% Mg) ferrite has been studied. The samples are prepared by solid state reaction method and sintered at 1300∘C for 6[Formula: see text]h. X-ray diffraction (XRD) patterns show the samples belong to single-phase cubic structure without any impurity phase. The magnetic properties (saturation magnetization and coercivity) of the samples have been investigated by VSM and found that the higher concentration of Li2CO3 reduces the hysteresis loss. DC resistivity increases with Li2CO3 contents whereas it decreases initially and then becomes constant at lower value with temperature which indicates that the studied samples are semiconductor. The dielectric dispersion occurs at a low-frequency regime and the loss peaks are formed in a higher frequency regime, which are due to the presence of resonance between applied frequency and hopping frequency of charge carriers. Notably, the loss peaks are shifted to the lower frequency with Li2CO3 additions.

INVESTIGATIONS ON Sm- AND Nb-SUBSTITUTED PZT CERAMICS

2006 ◽  
Vol 20 (29) ◽  
pp. 1879-1882 ◽  
Author(s):  
CHANDRA PRAKASH ◽  
J. K. JUNEJA
Keyword(s):  
Dielectric Constant ◽  
Single Phase ◽  
Xrd Analysis ◽  
Chemical Formula ◽  
X Ray Diffraction ◽  
Pzt Ceramics ◽  
Ceramic Method ◽  
X Ray ◽  
Niobium Doping ◽  
Constant Versus

In the present paper, we report the effect of Samarium substitution and Niobium doping on the properties of a PZT(52:48). The properties studied are: structural, dielectric and ferroelectric. The samples with chemical formula Pb 0.99 Sm 0.01 Zr 0.52 Ti 0.48 O 3 were prepared by solid-state dry ceramic method. Small amount (0.5 wt%) of Nb 2 O 5 was also added. X-ray diffraction (XRD) analysis showed formation of a single phase with tetragonal structure. Dielectric properties were studied as a function of temperature and frequency. Transition temperature, Tc, was determined from dielectric constant versus temperature plot. The material shows well-defined ferroelectric (PE) hysteresis loop.

scholarly journals Ferromagnetic Order in the Intermetallic Alloys laNi5-xMgx

2012 ◽  
Vol 29 (1) ◽  
pp. 50
Author(s):  
D.N Ba ◽  
L.T Tai ◽  
N.T Trung ◽  
N.T Huy
Keyword(s):  
Magnetic Properties ◽  
Curie Temperature ◽  
Room Temperature ◽  
Single Phase ◽  
Chemical Doping ◽  
Intermetallic Alloys ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ferromagnetic Order ◽  
Diffraction Patterns

The influences of the substitution of Ni with Mg on crystallographic and magnetic properties of the intermetallic alloys LaNi5-xMgx (x ≤ 0.4) were investigated. The X-ray diffraction patterns showed that all samples were of single phase, and the lattice parameters, a and c, decreased slightly upon chemical doping. LaNi5 is well known as an exchange-enhanced Pauli paramagnet. Interestingly, in LaNi5-xMgx, the ferromagnetic order existed even with a small amount of dopants; the Curie temperature reached the value of room temperature for x = 0.2, and enhanced with increasing x.

Fabrication and Magnetic Properties of Fe3O4 Nanobranches via a Simple Solvothermal Method

2011 ◽  
Vol 335-336 ◽  
pp. 934-939
Author(s):  
Z. F. Zi ◽  
Y. N. Liu ◽  
Q.C. Liu ◽  
Jian Ming Dai ◽  
Yu Ping Sun
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Solvothermal Method ◽  
X Ray Diffraction ◽  
Scanning Electronic Microscopy ◽  
Electronic Microscopy ◽  
X Ray ◽  
Water Solvent ◽  
Phase Spinel ◽  
Antisite Defects

Magnetite (Fe3O4) nanobranches were synthesized using an improved solvothermal technique in mixed ethanol and water solvent. Structural and magnetic properties were systematically investigated. X-ray diffraction results showed that the sample was single-phase spinel structure. The results of scanning electronic microscopy exhibited that the grains were regular like-branch with sizes from 3 to 6 μm in length and in diameter between 50 and 200 nm. The composition determined by energy dispersive spectroscopy was very close to the stoichiometry of Fe3O4. The saturation magnetizations (Ms) at 10 and 300 K of the synthesized Fe3O4nanobranches were much lower than the theoretical values. On one hand, it could be explained by obstructive magnetizing along their non-easy magnetic axes by the shape anisotropy of Fe3O4nanobranches, on the other hand, lesserMscan also be understood by the existence of antisite defects.

Structural and magnetic properties of DyCo4−xFexGa compounds

2010 ◽  
Vol 25 (S1) ◽  
pp. S31-S35
Author(s):  
W. H. Zhang ◽  
J. Q. Li ◽  
Y. J. Yu ◽  
F. S. Liu ◽  
W. Q. Ao ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Magnetic Measurements ◽  
Uniaxial Anisotropy ◽  
Solubility Limit ◽  
Spin Reorientation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Spin Reorientation Transition ◽  
Structural And Magnetic Properties

The structural and magnetic properties of the DyCo4−xFexGa compounds with x=0, 0.5, 1, and 1.5 have been investigated by X-ray diffraction and magnetic measurements. Powder X-ray diffraction analysis reveals that each of the DyCo4−xFexGa compounds has a hexagonal CaCu5-type structure (space group P6/mmm). The Fe solubility limit in DyCo4−xFexGa is x<1.5. The higher the value of x, the larger the unit-cell parameters a, c, V, and the 3d-sublattice moment but the smaller the 3d uniaxial anisotropy. Magnetic measurements show that the Curie temperature of DyCo4−xFexGa increases from 498 K for x=0 to 530 K for x=1.5, the compensation temperature Tcomp decreases from 286 K for x=0 to 238 K for x=1.5, and the spin-reorientation transition temperature increases from 403 K for x=0 to 530 K for x=0.5. No spin-reorientation transition was found in the samples with x=1.0 and 1.5. The saturation magnetization of DyCo4−xFexGa measured at 173 K increases but the magnetization measured at 300 K decreases with increasing Fe content x.

Sign in / Sign up

Export Citation Format

Share Document