scholarly journals Effect of climate change on the annual energy consumption of a single family house in British Columbia

2018 ◽  
Vol 251 ◽  
pp. 03018
Author(s):  
Fuad Mutasim Baba ◽  
Hua Ge

The Earth is already experiencing some of the effects of climate change, such as rising temperature, more frequent storms, increased precipitation, etc. This paper investigates the effect of climate change on the energy consumption of a single-family house with different energy efficiency levels, i.e. bylaw to meet current National Energy Code of Canada for Buildings (NECB), and passive house (PH) to meet the PH requirements under four climate zones in British Columbia, Canada. SRES A2, RCP 4.5 and RCP 8.5 emission scenarios are used to generate future climate for 2020, 2050, and 2080. The simulation results show that for both bylaw and PH cases, heating energy consumption will be reduced while cooling energy consumption will be increased, as a result for bylaw case, the energy consumption will be decreased for four climate zones, while for PH case, the energy consumption will be increased for zone 4 & 5 and decreased for zone 6 & 7. In climate zone 5, the building fails to meet the PH requirements during 2050. Therefore, buildings designed based on historical weather data will perform differently under the changing future climates, thus the efforts should be made to design buildings that are adaptable to climate change.

2017 ◽  
Vol 133 (1-2) ◽  
pp. 521-530 ◽  
Author(s):  
Fanchao Meng ◽  
Mingcai Li ◽  
Jingfu Cao ◽  
Ji Li ◽  
Mingming Xiong ◽  
...  

2019 ◽  
Vol 282 ◽  
pp. 02066
Author(s):  
Fuad Mutasim Baba ◽  
Hua Ge

Buildings now produce more than a third of global greenhouse gases, making them more than any other sector contributing to climate change. This paper investigates the effect of climate change on the energy performance and thermal comfort of a high-rise residential building with different energy characteristic levels, i.e. bylaw to meet current National Energy Code of Canada for Buildings (NECB), and passive house (PH) under two climate zones in British Columbia, Canada. SRES A2, RCP-4.5 and RCP-8.5 emission scenarios are used to generate future horizon weather data for 2020, 2050, and 2080. The simulation results show that for both bylaw and PH cases, the heating energy consumption would be reduced while cooling energy consumption would be increased. As a result, for the bylaw case, the total energy consumption would be decreased for two climate zones, while for PH case, the total energy consumption would be increased for zone 4 and decreased for zone 7. In addition, the number of hours with overheating risks would be increased under future climates, e.g. doubled in 2080, compared to the historical weather data. Therefore, efforts should be made in building design to take into account the impact of climate change to ensure buildings built today would perform as intended under changing climate.


Author(s):  
Marcin Koniorczyk ◽  
Witold Grymin ◽  
Marcin Zygmunt ◽  
Dalia Bednarska ◽  
Alicja Wieczorek ◽  
...  

AbstractIn the analyses of the uncertainty propagation of buildings’ energy-demand, the Monte Carlo method is commonly used. In this study we present two alternative approaches: the stochastic perturbation method and the transformed random variable method. The energy-demand analysis is performed for the representative single-family house in Poland. The investigation is focused on two independent variables, considered as uncertain, the expanded polystyrene thermal conductivity and external temperature; however the generalization on any countable number of parameters is possible. Afterwards, the propagation of the uncertainty in the calculations of the energy consumption has been investigated using two aforementioned approaches. The stochastic perturbation method is used to determine the expected value and central moments of the energy consumption, while the transformed random variable method allows to obtain the explicit form of energy consumption probability density function and further characteristic parameters like quantiles of energy consumption. The calculated data evinces a high accordance with the results obtained by means of the Monte Carlo method. The most important conclusions are related to the computational cost reduction, simplicity of the application and the appropriateness of the proposed approaches for the buildings’ energy-demand calculations.


Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4805
Author(s):  
Shu Chen ◽  
Zhengen Ren ◽  
Zhi Tang ◽  
Xianrong Zhuo

Globally, buildings account for nearly 40% of the total primary energy consumption and are responsible for 20% of the total greenhouse gas emissions. Energy consumption in buildings is increasing with the increasing world population and improving standards of living. Current global warming conditions will inevitably impact building energy consumption. To address this issue, this report conducted a comprehensive study of the impact of climate change on residential building energy consumption. Using the methodology of morphing, the weather files were constructed based on the typical meteorological year (TMY) data and predicted data generated from eight typical global climate models (GCMs) for three representative concentration pathways (RCP2.6, RCP4.5, and RCP8.5) from 2020 to 2100. It was found that the most severe situation would occur in scenario RCP8.5, where the increase in temperature will reach 4.5 °C in eastern Australia from 2080–2099, which is 1 °C higher than that in other climate zones. With the construction of predicted weather files in 83 climate zones all across Australia, ten climate zones (cities)—ranging from heating-dominated to cooling-dominated regions—were selected as representative climate zones to illustrate the impact of climate change on heating and cooling energy consumption. The quantitative change in the energy requirements for space heating and cooling, along with the star rating, was simulated for two representative detached houses using the AccuRate software. It could be concluded that the RCP scenarios significantly affect the energy loads, which is consistent with changes in the ambient temperature. The heating load decreases for all climate zones, while the cooling load increases. Most regions in Australia will increase their energy consumption due to rising temperatures; however, the energy requirements of Adelaide and Perth would not change significantly, where the space heating and cooling loads are balanced due to decreasing heating and increasing cooling costs in most scenarios. The energy load in bigger houses will change more than that in smaller houses. Furthermore, Brisbane is the most sensitive region in terms of relative space energy changes, and Townsville appears to be the most sensitive area in terms of star rating change in this study. The impact of climate change on space building energy consumption in different climate zones should be considered in future design strategies due to the decades-long lifespans of Australian residential houses.


2020 ◽  
pp. 1420326X2096115
Author(s):  
Jaime Resende ◽  
Marta Monzón-Chavarrías ◽  
Helena Corvacho

Buildings account for 34% of world energy consumption and about half of electricity consumption. The nearly/Net Zero Energy Building (nZEB/NZEB) concepts are regarded as solutions for minimizing this problem. The countries of Southern Europe, which included the nZEB concept recently in their regulatory requirements, have both heating and cooling needs, which adds complexity to the problem. Brazil may benefit from their experience since most of the Brazilian climate zones present significant similarities to the Southern European climate. Brazil recently presented a household energy consumption increase, and a growing trend in the use of air conditioning is predicted for the coming decades. Simulations with various wall and roof solutions following the Brazilian Performance Standard were carried out in a low standard single-family house in three different climate zones in order to evaluate thermal comfort conditions and energy needs. Results show that in milder climate zones, achieving thermal comfort with a low energy consumption is possible, and there is a great potential to achieve a net zero-energy balance. In the extreme hot climate zone, a high cooling energy consumption is needed to provide thermal comfort, and the implementation of a nearly zero-energy balance may be more feasible.


Buildings ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 364
Author(s):  
Johannes Koke ◽  
André Schippmann ◽  
Jingchun Shen ◽  
Xingxing Zhang ◽  
Peter Kaufmann ◽  
...  

Container-based lightweight buildings offer a high ecologic and economic potential when they are designed as nearly zero-energy container buildings (NZECBs). Thus, they are relevant to energy transition in achieving an almost climate-neutral building stock. This paper describes and applies design strategies for suitable building concepts and energy systems to be used in NZECBs for different climates. Therefore, different applications in representative climatic zones were selected. Initially, the global climate zones were characterized and analyzed with regard to their potential for self-sufficiency and renewable energies in buildings. The design strategies were further developed and demonstrated for three cases: a single-family house in Sweden, a multi-family house in Germany, and a small school building in rural Ethiopia. For each case, design guidelines were derived and building concepts were developed. On the basis of these input data, various energy concepts were developed in which solar and wind energy, as well as biomass, were integrated as renewable energy sources. All the concepts were simulated and analyzed with the Polysun® software. The various approaches were compared and evaluated, particularly with regard to energy self-sufficiency. Self-sufficiency rates up to 80% were achieved. Finally, the influence of different climate zones on the energy efficiency of the single-family house was studied as well as the influence of the size of battery storage and insulation.


2016 ◽  
Vol 20 (suppl. 1) ◽  
pp. 309-320 ◽  
Author(s):  
Valentina Turanjanin ◽  
Biljana Vucicevic ◽  
Marina Jovanovic

The existing building stock energy consumption accounts for about 38% of final energy consumption in Republic of Serbia. 70% of that energy is consumed by residential sector, mostly for space heating. This research is addressed to the single family house building placed in the Belgrade city. The house has ground and first floor with total heating area of 130 m2 and pellet as space heating source. The aim of this paper is to evaluate energy and economic analysis for different heating systems. Several homeheating were compared: Option 1 (biomass combustion boiler using pellet as a fuel), Option 2 (gas combustion boiler) and Option 3 (heat pump). The building performance was evaluated by TRNSYS 17 simulation code. Results show estimated savings using renewable energy sources.


Sign in / Sign up

Export Citation Format

Share Document