scholarly journals Aspects about the implementation of the occupational safety and health strategy in Romania

2019 ◽  
Vol 290 ◽  
pp. 12020
Author(s):  
Nicoleta Paula Neag ◽  
Alin Gaureanu

European directives related the occupational health and safety set out minimum requirements and fundamental principles, for managing the specific problems related to occupational risks, principle of prevention and risk assessment, as well as the responsibilities of employers and employees. A series of European guidelines aims to facilitate the implementation of European directives, including standards of related fields. The European Union Strategic Framework on Health and Safety at Work 2014 – 2020 has pushed the Member States to review their national strategies in close consultation with relevant stakeholders including the social partners. Thus, national strategies must transfer and customize the European vision to the national culture and specifics, considering the European framework that acts as a common guide and reference. Romania has adopted several versions of the National Strategy for Health and Safety at Work and the last one is related to the 2018 - 2020 period. Based on this document and the implementation plan associated the article will present a quantitative approach of the SWOT analysis. This research approach is meant to identify and characterize the new strategic direction that should be followed, together with a set of important aspect for the implementation plan up-date. The conclusions of this study will provide a scientific base for policy makers in the field of occupational health and safety.

2019 ◽  
Vol 2 (2) ◽  
pp. 126-138
Author(s):  
Teresa Lis ◽  
Krzysztof Nowacki

Abstract Problems related to work safety have been accompanying humanity since the dawn of time. In times before the Industrial Revolution, human and animal muscle strength was used to work, and “safe work” solutions were developed and introduced individually by the user or supervising the work. Only a change in the way work was done due to the industrial revolution, the introduction of new energy sources, the transformation of manufactories into factories and the birth of the working class brought about greater, concrete changes. It was at that time that various machines and devices began to be introduced into the workplace, which on the one hand improved work and on the other hand created more and more potentially dangerous situations. Security was started holistically and institutionally. With the transformation and return of capitalism, the subject of real work safety returned. Health and safety was to be not only a fashionable slogan, but a value that was supposed to guarantee profit – in accordance with the principle that accidents reduce productivity. It was also connected with the process of adapting Polish law in the field of health and safety to the law of the European Union (EU), which resulted from Poland’s pursuit of EU membership. Moreover, an important factor initiating these changes was the interest of enterprises in quality management systems compliant with the ISO 9000 series and environmental management systems compliant with the ISO 14000 series, and related attempts to adapt the system management concept to the area of occupational health and safety, resulting in PN-N standards 18000 series. This publication analyzes the new standard PN-ISO 45001:2018 – “Occupational health and safety management systems – Requirements with guidance for use” comparing it with the standard PN-N 18001:2004 – “Occupational health and safety management. Requirements”.


2020 ◽  
Vol 8 (1) ◽  
pp. 375-391
Author(s):  
Domagoj Šantek ◽  
Sandra Debeljak ◽  
Rui Isidoro

The domain of occupational safety and health at work is put for regulation through directives by founding agreements. This means that the institutions of the European Union prescribe minimum standards of safety and health at work through directives and Member States need to accomplish goals that a particular directive pursues. At the same time, this means that each Member State can also set stricter standards than the ones prescribed through directives and for this reason some differences in regulations of individual Member States can be noticed. In this paper, authors focus on the role of occupational safety specialist and the manner in which the Republic of Croatia and the Portuguese Republic, in their legislation, prescribe obligations of the employer in terms of contracting the performance of occupational health and safety tasks with an occupational safety specialist or an external service. Authors furthermore examine required conditions which occupational safety specialist must meet to perform those tasks. Apart from outlining the Croatian and Portuguese legislation, authors also present and define fundamental similarities and differences in the regulations within this domain of security legislation.


2014 ◽  
Vol 4 (4) ◽  
pp. 21 ◽  
Author(s):  
Priscilla Wanjiku Ndegwa ◽  
Wario Guyo ◽  
George Orwa ◽  
Robert Ng’ang’a ◽  
Elishba Muthoni Murigi

Recent trends in the organization of work have increased the risk of occupational safety and health (OSH) in Kenyan industries through exposure to hazardous substances, work related accidents and increased stress-related illnesses. According to International lab our organization (ILO) everyone is entitled to the right to safe and healthy working conditions and therefore the corpus of law in Kenya dealing with occupational safety and health should be embedded in the international OSH legal instruments. Specifically the occupational health and safety Act (2007) is expected to provide for safety, health and welfare of workers and all persons lawfully present at workplaces. The purpose of this study therefore was to investigate legal framework as a determinant of implementation of occupational health and safety programmes in the manufacturing sector in Kenya. It focused on six legal areas predicted as affecting implementation of OSH. These factors were national OSH policy, OSHA (occupational safety and health Act) familiarity with OSHA, government OSH inspections and audits, ease of implementation of OSHA, Government support in the implementation of OSH and OSHA implement ability. The study adopted descriptive cross-sectional survey design but however intended to gather both qualitative and quantitative data. A self administered questionnaire was used to collect data from 257 OSH officers drawn randomly from 735 manufacturing industries registered by Kenya manufacturers association. 252 questionnaires were received back and analyzed with the help of SSPS window version 21. Both correlation and regression analysis were conducted and the results showed that there was a positive significant relationship between legal framework and implementation of OSH programmes. 


Author(s):  
Dhimas Herdhianta ◽  
◽  
Hanifa Maher Denny ◽  
◽  

ABSTRACT Background: Hospital occupational health and safety is all activities to ensure and protect the safety and health of hospital human resources, patients, patient companions, visitors, and the hospital environment through efforts to prevent occupational accident and occupational disease in the hospital. It is necessary to support resources, organization, and policies in the implementation of occupational safety and health in hospitals in order to create a safe, secure and comfortable hospital condition. This study aimed to analyze the implementation of occupational safety and health at Hospital X Semarang, Central Java. Subjects and Method: This was a qualitative study conducted at Hospital X Semarang, Central Java. A total of 6 informants consisting of the main informants (members of the hospital occupational health and safety team) and triangulation informants (head of the hospital occupational health and safety team) were enrolled in this study. The data were obtained from in-depth interview method. The data were analyzed descriptively. Results: The hospital already had and provided the special budget needed in the field of hospital occupational health and safety, such as 1) Activity and provision of hospital occupational health and safety infrastructure; 2) Human Resources (HR) and assigns personnel who have clear responsibilities, authorities, and obligations in handling hospital occupational health and safety; 3) Hospital occupational health and safety official team but with double work burden; and 4) Policies were owned and compiled in written form, dated, and endorsed by the main director as well as commitment from the top leadership. Conclusion: The implementation of occupational safety and health in hospital X is quite good. Meanwhile, there is still a double work burden and have no independent hospital occupational health and safety team. Keyword: resources, organization, policy, work safety, occupational health, hospital Correspondence: Dhimas Herdhianta, Masters Program of Health Promotion, Faculty of Public Health, Universitas Diponegoro. Email: [email protected]. Mobile: 085749312412 DOI: https://doi.org/10.26911/the7thicph.04.09


1997 ◽  
Vol 27 (2) ◽  
pp. 247-271 ◽  
Author(s):  
David R. Walters

This article outlines the legislative requirements for preventive services in health and safety in 13 European countries and considers the implementation and coverage of such services. The author identifies the predominant models of preventive services operating in the European Union, then assesses the influence of the E.U. Framework Directive 89/391 on the development and integration of preventive services and the role of workers in their organization and accountability. Significant differences exist in the extent and functions of preventive services in European countries, including differences in coverage between southern and northern European countries, different degrees to which employees in small enterprises and large enterprises are covered by preventive services, and overall differences in legislative approach.


1997 ◽  
Vol 48 (4) ◽  
pp. 385 ◽  
Author(s):  
J. L. Barnett ◽  
E. A. Newman

The scientific literature and research in progress since 1992 on poultry welfare were reviewed under the major headings of housing, management, health, and occupational health and safety. Throughout the review there are a number of recommendations for research and implications for the Australian egg industry arising from the current worldwide research. The main recommendations can be summarised as follows. Further economic analyses of perches in cages under Australian conditions are required if the welfare advantages of incorporating perches into cages are to be maximised by the Australian industry. To reduce bone breakage, depopulation should involve removing birds by both legs, and current research on dietary manipulation could lead to a reduction in the incidence of osteoporosis. Injuries and entrapment can be reduced by the application of an abrasive strip to limit claw length, and a simple way of reducing mortalities may be by using coloured plastic enrichment devices. If enriched modified cages are to be adopted, a survey of public attitudes on their acceptability and trialing them under Australian conditions are required. It is important that welfare recommendations from overseas research and development are validated under Australian conditions to prevent compromising bird welfare. Replicated experiments on the welfare implications of non-cage systems are urgently required. Beak trimming remains controversial, and determining the extent of single and double beak trimming and the reasons for their practice may lead to a reduced frequency of use. If beak trimming were to be disallowed in the future, the overseas knowledge on low light levels to reduce cannibalism and intermittent light schedules to maintain production would have to be reviewed, perhaps developed, and adopted. Also, a current common housing option of open-fronted sheds and exposure of hens to ambient light would have to be reassessed. While moulting via dietary restriction is not currently considered a significant welfare issue in Australia, a more sophisticated research approach to manipulate ovarian function that does not rely on food restriction should be researched. Cooling birds by providing cool water or cool radiators may be beneficial to welfare in hot weather. The slaughter process involves a number of potential welfare issues, such as heat-related problems during transport, stunning currents, and gas stunning, that require either a survey to identify problems or assessment. The human–animal relationship probably has an important role in poultry welfare. However, the current understanding of the human factors that regulate human–animal interactions in poultry is poor. Some basic research and considerable applied research are required in this area before it would be possible to benefit bird welfare. Flock health monitoring must be considered as an ongoing priority because of its impact on bird welfare. In the area of health and welfare, the interactions between diet and skeletal condition, disease resistance and transmission, and housing and handling and immunosuppression require further research. Any relevant improvements in technology that arise from overseas research in non-cage environments to improve working conditions should be assessed and, if appropriate, adopted by the Australian industry because of its potential impact on occupational health and safety, work ethic, and the implications this has for bird welfare.


Author(s):  
Andrew Watterson

This commentary examines the occupational health and safety issues faced by the UK workers in the COVID-19 pandemic, against the background of government cuts in health care and in occupational health and safety budgets, and a deregulatory climate. The UK government has been obsessed, blinkered, and distracted by the desire to leave the European Union (Brexit). The state of knowledge about the virus, especially from international agencies that identified pandemic threats and strategies to combat it, is outlined. UK politicians, government bodies, medical and scientific advisors, and employers periodically ignored or abused that knowledge. Regulatory and ministerial inaction and errors on the workplace virus risks emerged. In contrast, several trade unions, health professional bodies, and nongovernmental organizations identified COVID-19 threats from poor personal protection equipment, working practices, and knowledge gaps and offered solutions for health care workers, social care workers, production workers, and service workers in “essential” occupations.


2014 ◽  
Vol 48 (3) ◽  
pp. 605-611 ◽  
Author(s):  
Clayton Sinyai ◽  
Pete Stafford ◽  
Chris Trahan

Many labour organizations that sponsor occupational health and safety training champion “peer training,” preferring instructors drawn from the shopfloor over academically credentialed experts. But peer training is hardly new: in the skilled trades, master craftsmen have instructed apprentices since the Middle Ages. Building on the apprenticeship model of education, the U.S.-based construction unions have created a network of more than 4,000 peer trainers who provide occupational health and safety training to up to 100,000 men and women in the building trades each year.


Author(s):  
Sergio Iavicoli ◽  
Carlo Grandi ◽  
Massimo Nesti ◽  
Alessandro Marinaccio ◽  
Benedetta Persechino ◽  
...  

2021 ◽  
Vol 8 (12) ◽  
pp. 404-410
Author(s):  
Hotbona Novandi Tambunan ◽  
Nazaruddin . ◽  
Isfenti Sadalia

Occupational Health and Safety (K3) is aimed as an effort to create a workplace that is safe, healthy, free from environmental pollution, so that it can reduce and or be free from work accidents and occupational diseases and can have an impact on increasing work efficiency and productivity. The need for implementation and Monitoring of the Occupational Health and Safety Management System at PT. Mujur Lestari must have a good corporate culture and be able to contribute to SMK3. For that PT. Mujur Lestari makes implementation and Monitoring to minimize the risk of work accidents for employees. The sample used in this study were employees of PT. Mujur Lestari, totaling 81 people. The data collection method used a questionnaire while the analytical method used was multivariate analysis. The results showed that there was an influence between knowledge on the Occupational Health and Safety Management System (SMK3) at PT. Mujur Lestari with a tcount greater than ttable, the effect of applying the Occupational Health and Safety Management System (SMK3) with a tcount greater than ttable, the effect of Monitoring on the Occupational Health and Safety Management System (SMK3) with a greater tcount from ttable and there is no relationship between the implementation and Monitoring of the Occupational Safety and Health Management System (SMK3). The conclusion shows that the knowledge variable has a positive and significant effect on the Occupational Safety and Health Management System (SMK3), the application variable has a positive and significant impact on the Occupational Safety and Health Management System (SMK3) and the Monitoring variable has a positive and significant effect on the Occupational Safety and Health Management System. (SMK3). Keywords: Occupational Health and Safety (K3), Occupational Health and Safety Management System (SMK3).


Sign in / Sign up

Export Citation Format

Share Document