Deformation mechanisms and effect of oxygen addition on mechanical properties of Ti-7.5Mo alloy with α” martensite

Effect of oxygen content as an important interstitial solute on the microstructure and mechanical properties of Ti-7.5Mo alloy was investigated. With increasing the oxygen content, the yielding strength, ultimate tensile strength and Young’s modulus of Ti-7.5Mo-xO (x=0, 0.2, 0.3, 0.4, 0.5) alloys increased, while the elongation showing a decreasing tendency. Solid-solution strengthening by the oxygen atoms has been addressed as the main strengthening mechanism. Ti-7.5Mo-xO (x ≤ 0.3) alloys have been regarded with an excellent combination of high yield strength (~640 MPa) and elongation (~28%), as well as low Young’s modulus (~60 GPa). The deformation microstructure of orthorhombic-α” martensite in Ti-7.5Mo alloy was also investigated by tracking a change in the microstructure of a selected area upon tensile deformation. Deformation twins induced by 5% tensile straining was identified as {112}α”-type I twins, which had not been reported before in α”martensite in β-Ti alloys.

Download Full-text

An Experimental Study of Carbon Nanotube Reinforcements

Volume 11: Nano and Micro Materials, Devices and Systems; Microsystems Integration ◽

10.1115/imece2011-64021 ◽

2011 ◽

Author(s):

Lauren Patrin ◽

Frank Chow ◽

Gabriela Philippart ◽

Feridun Delale ◽

Benjamin Liaw ◽

...

Keyword(s):

Mechanical Properties ◽

Young’S Modulus ◽

Room Temperature ◽

Elevated Temperatures ◽

Young's Modulus ◽

Testing Machine ◽

Type I ◽

Electrical Measurements ◽

Standard Type ◽

Reinforcement Percentage

Due to their high strength and stiffness carbon nanotubes (CNTs) have been considered as candidates for reinforcement of polymeric resins. It is also known that the addition of CNTs to polymeric matrix results in highly conductive nanocomposites, making the material multifunctional. Most of the CNT reinforced polymeric nanocomposite systems reported in the literature have been studied at room temperature. However, in many applications, materials may be subjected from low to elevated temperatures. Thus, the aim of this research is to study CNT reinforced polypropylene (PP) specimens at room, elevated and low temperatures. ASTM standard Type I specimens manufactured via injection molding and reinforced with 0.2%, 1%, 3%, and 6% CNTs were first subjected to tensile loads in a universal testing machine at room temperature. Neat PP resin specimens were also tested to provide baseline data. The tests were repeated at −54°C (−65°F), −20°C (−4°F), 49°C (120°F) and 71°C (160°F). The results were plotted as stress-strain curves and analyzed to delineate the effect of CNT reinforcement percentage and temperature on the mechanical properties. It was noted that as the percentage of CNT reinforcement increases, the resulting nanocomposite becomes stiffer (higher Young’s modulus), has higher strength and becomes more brittle. Temperature has a drastic effect on the behavior of the nanocomposite. As the temperature increases, at a given reinforcement percentage the material becomes more ductile with significantly lower Young’s modulus and strength compared to room temperature. At lower temperatures, the nanocomposite becomes more brittle with higher stiffness and strength, but significantly reduced failure strain. Also electrical measurements were conducted on the specimens to measure their resistance. For specimens reinforced with up to 3% of CNTs no electrical conductivity was detected. As expected at 6% CNT reinforcement (which is above the approximately 4% percolation limit reported in the literature), the specimens became electrically conductive. To predict the mechanical properties obtained experimentally, a micromechanics based model is presented and compared with the experimental results.

Download Full-text

Recycled HDPE-tetrapack composites. Isothermal crystallization, light scattering and mechanical properties

MRS Proceedings ◽

10.1557/opl.2013.252 ◽

2012 ◽

Vol 1485 ◽

pp. 77-82 ◽

Cited By ~ 2

Author(s):

A Parada-Soria ◽

HF Yao ◽

B Alvarado-Tenorio ◽

L Sanchez-Cadena ◽

A Romo-Uribe

Keyword(s):

Mechanical Properties ◽

Light Scattering ◽

Young’S Modulus ◽

Tensile Deformation ◽

Young's Modulus ◽

Ultimate Tensile Stress ◽

Uniaxial Tensile ◽

Scanning Calorimetry ◽

Slow Cooling ◽

The Matrix

ABSTRACTIn this research the thermal and mechanical properties of composites based on recycled high-density polyethylene (HDPE) and recycled Tetrapak have been investigated. The matrix and filler are recovered from landfills. Multicolor HDPE mixtures, with varying concentration of tetrapack flakes, are hot pressed, as well as single color HDPE flakes. Previous studies determine that the nature of the pigment (organics vs. inorganics) strongly influence the mechanical behavior of multicolor HDPE-tetrapack composites. Thus, this research focuses on single color HDPE hot pressed plaques. The kinetics of crystallization under isothermal conditions is determined by differential scanning calorimetry (DSC). The results show that the crystallization kinetics obeys the Avrami theory, and that the Avrami exponent is 1, irrespective of the pigment in use. Small-angle light scattering is applied to investigate the internal structure of the pigmented HDPE. SALS patterns show that the samples exhibited oriented morphologies. However, after melting and slow cooling under pressure the samples exhibit an isotropic morphology. This is confirmed by polarized optical microscopy. Mechanical properties such as Young’s modulus, yield stress and ultimate tensile stress are obtained under uniaxial tensile deformation at room temperature. For the single color HDPE plaques the Young’s modulus is reduced (after melting), suggesting that the anisotropic molecular chains contribute to the higher value of Young’s modulus.

Download Full-text

Influence of 90-day simulated microgravity on human tendon mechanical properties and the effect of resistive countermeasures

Journal of Applied Physiology ◽

10.1152/japplphysiol.01266.2004 ◽

2005 ◽

Vol 98 (6) ◽

pp. 2278-2286 ◽

Cited By ~ 138

Author(s):

N. D. Reeves ◽

C. N. Maganaris ◽

G. Ferretti ◽

M. V. Narici

Keyword(s):

Mechanical Properties ◽

Young’S Modulus ◽

Simulated Microgravity ◽

Tensile Deformation ◽

Young's Modulus ◽

Plantar Flexion ◽

Bed Rest ◽

Muscle Performance ◽

Tendon Stiffness ◽

Human Tendon

While microgravity exposure is known to cause deterioration of skeletal muscle performance, little is known regarding its effect on tendon structure and function. Hence, the aims of this study were to investigate the effects of simulated microgravity on the mechanical properties of human tendon and to assess the effectiveness of resistive countermeasures in preventing any detrimental effects. Eighteen men (aged 25–45 yr) underwent 90 days of bed rest: nine performed resistive exercise during this period (BREx group), and nine underwent bed rest only (BR group). Calf-raise and leg-press exercises were performed every third day using a gravity-independent flywheel device. Isometric plantar flexion contractions were performed by using a custom-built dynamometer, and ultrasound imaging was used to determine the tensile deformation of the gastrocnemius tendon during contraction. In the BR group, tendon stiffness estimated from the gradient of the tendon force-deformation relation decreased by 58% (preintervention: 124 ± 67 N/mm; postintervention: 52 ± 28 N/mm; P < 0.01), and the tendon Young's modulus decreased by 57% postintervention ( P < 0.01). In the BREx group, tendon stiffness decreased by 37% (preintervention: 136 ± 66 N/mm; postintervention: 86 ± 47 N/mm; P < 0.01), and the tendon Young's modulus decreased by 38% postintervention ( P < 0.01). The relative decline in tendon stiffness and Young's modulus was significantly ( P < 0.01) greater in the BR group compared with the BREx group. Unloading decreased gastrocnemius tendon stiffness due to a change in tendon material properties, and, although the exercise countermeasures did attenuate these effects, they did not completely prevent them. It is suggested that the total loading volume was not sufficient to completely prevent alterations in tendon mechanical properties.

Download Full-text

Numerical modeling of the effects hydration and number of hydrogen bonds on the mechanical properties of the tropocollagen molecule

Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine ◽

10.1177/0954411919898935 ◽

2020 ◽

Vol 234 (3) ◽

pp. 299-306 ◽

Cited By ~ 1

Author(s):

Marouane El Mouss ◽

Amna Rekik ◽

Said Zellagui ◽

Tarek Merzouki ◽

Ridha Hambli

Keyword(s):

Mechanical Properties ◽

Finite Element ◽

Hydrogen Bonds ◽

Young’S Modulus ◽

Young's Modulus ◽

Strain Curve ◽

Collagen Molecule ◽

Uniaxial Tensile ◽

Type I ◽

Two Parameters

Bone aging involves structural and molecular modifications, especially at the level of type I tropocollagen. This macromolecule shows two main age-related alterations, which are the decrease of both molecular diameter (due to the loss of hydration) and number of hydrogen bonds. In this work, it is proposed to investigate the influence of these two parameters (molecular diameter and number of hydrogen bonds) on the mechanical behavior of tropocollagen using finite element method. To this end, a novel three-dimensional finite element model of collagen molecule accounting for hydrogen bonds was developed. Then, a numerical design of experiments for the diameter of tropocollagen and variations in the number of hydrogen bonds has been established. The mechanical properties (“load–strain” curve and apparent Young’s modulus) of the collagen molecule were obtained by employing the proposed model to uniaxial tensile tests. The parametric study demonstrates that the mechanical properties of tropocollagen are slightly affected by the rate of hydration but considerably affected by variation of the number of hydrogen bonds. Finally, a fitted analytical function was deduced from the above results showing effects of the two parameters (hydration rate and hydrogen bonds) on the apparent Young’s modulus of tropocollagen. This study could be useful to understand the influence of structural age modifications of tropocollagen on the macroscopic mechanical properties of bone.

Download Full-text

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

Matériaux & Techniques ◽

10.1051/mattech/2018063 ◽

2019 ◽

Vol 107 (2) ◽

pp. 207 ◽

Cited By ~ 2

Author(s):

Jaroslav Čech ◽

Petr Haušild ◽

Miroslav Karlík ◽

Veronika Kadlecová ◽

Jiří Čapek ◽

...

Keyword(s):

Mechanical Properties ◽

Mechanical Alloying ◽

Young’S Modulus ◽

Milling Time ◽

Young's Modulus ◽

Element Model ◽

X Ray Diffraction ◽

X Ray ◽

Powder Particles ◽

Complete Homogenization

FeAl20Si20 (wt.%) powders prepared by mechanical alloying from different initial feedstock materials (Fe, Al, Si, FeAl27) were investigated in this study. Scanning electron microscopy, X-ray diffraction and nanoindentation techniques were used to analyze microstructure, phase composition and mechanical properties (hardness and Young’s modulus). Finite element model was developed to account for the decrease in measured values of mechanical properties of powder particles with increasing penetration depth caused by surrounding soft resin used for embedding powder particles. Progressive homogenization of the powders’ microstructure and an increase of hardness and Young’s modulus with milling time were observed and the time for complete homogenization was estimated.

Download Full-text

First principles computation of composition dependent elastic constants of omega in titanium alloys: implications on mechanical behavior

Scientific Reports ◽

10.1038/s41598-021-91594-5 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

R. Salloom ◽

S. A. Mantri ◽

R. Banerjee ◽

S. G. Srinivasan

Keyword(s):

Mechanical Properties ◽

Young’S Modulus ◽

First Principles ◽

Young's Modulus ◽

Group Vi ◽

Group V ◽

Β Phase ◽

Ti Alloys ◽

Ω Phase ◽

Stabilizer Concentration

AbstractFor decades the poor mechanical properties of Ti alloys were attributed to the intrinsic brittleness of the hexagonal ω-phase that has fewer than 5-independent slip systems. We contradict this conventional wisdom by coupling first-principles and cluster expansion calculations with experiments. We show that the elastic properties of the ω-phase can be systematically varied as a function of its composition to enhance both the ductility and strength of the Ti-alloy. Studies with five prototypical β-stabilizer solutes (Nb, Ta, V, Mo, and W) show that increasing β-stabilizer concentration destabilizes the ω-phase, in agreement with experiments. The Young’s modulus of ω-phase also decreased at larger concentration of β-stabilizers. Within the region of ω-phase stability, addition of Nb, Ta, and V (Group-V elements) decreased Young’s modulus more steeply compared to Mo and W (Group-VI elements) additions. The higher values of Young’s modulus of Ti–W and Ti–Mo binaries is related to the stronger stabilization of ω-phase due to the higher number of valence electrons. Density of states (DOS) calculations also revealed a stronger covalent bonding in the ω-phase compared to a metallic bonding in β-phase, and indicate that alloying is a promising route to enhance the ω-phase’s ductility. Overall, the mechanical properties of ω-phase predicted by our calculations agree well with the available experiments. Importantly, our study reveals that ω precipitates are not intrinsically embrittling and detrimental, and that we can create Ti-alloys with both good ductility and strength by tailoring ω precipitates' composition instead of completely eliminating them.

Download Full-text

Tailoring a Low Young Modulus for a Beta Titanium Alloy by Combining Severe Plastic Deformation with Solution Treatment

Materials ◽

10.3390/ma14133467 ◽

2021 ◽

Vol 14 (13) ◽

pp. 3467

Author(s):

Anna Nocivin ◽

Doina Raducanu ◽

Bogdan Vasile ◽

Corneliu Trisca-Rusu ◽

Elisabeta Mirela Cojocaru ◽

...

Keyword(s):

Electron Microscopy ◽

Mechanical Properties ◽

Plastic Deformation ◽

Severe Plastic Deformation ◽

Young’S Modulus ◽

Young's Modulus ◽

Solution Treatment ◽

Young Modulus ◽

Orthopedic Implants ◽

Beta Titanium Alloy

The present paper analyzed the microstructural characteristics and the mechanical properties of a Ti–Nb–Zr–Fe–O alloy of β-Ti type obtained by combining severe plastic deformation (SPD), for which the total reduction was of etot = 90%, with two variants of super-transus solution treatment (ST). The objective was to obtain a low Young’s modulus with sufficient high strength in purpose to use the alloy as a biomaterial for orthopedic implants. The microstructure analysis was conducted through X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) investigations. The analyzed mechanical properties reveal promising values for yield strength (YS) and ultimate tensile strength (UTS) of about 770 and 1100 MPa, respectively, with a low value of Young’s modulus of about 48–49 GPa. The conclusion is that satisfactory mechanical properties for this type of alloy can be obtained if considering a proper combination of SPD + ST parameters and a suitable content of β-stabilizing alloying elements, especially the Zr/Nb ratio.

Download Full-text

Phase Formation, Microstructure and Mechanical Properties of Mg67Ag33 as Potential Biomaterial

Metals ◽

10.3390/met11030461 ◽

2021 ◽

Vol 11 (3) ◽

pp. 461

Author(s):

Konrad Kosiba ◽

Konda Gokuldoss Prashanth ◽

Sergio Scudino

Keyword(s):

Mechanical Properties ◽

Young’S Modulus ◽

Young's Modulus ◽

Equilibrium Phase ◽

Antibacterial Properties ◽

Equilibrium Phase Diagram ◽

Compressive Yield Strength ◽

X Ray ◽

Fine Grained ◽

Equilibrium Phases

The phase and microstructure formation as well as mechanical properties of the rapidly solidified Mg67Ag33 (at. %) alloy were investigated. Owing to kinetic constraints effective during rapid cooling, the formation of equilibrium phases is suppressed. Instead, the microstructure is mainly composed of oversaturated hexagonal closest packed Mg-based dendrites surrounded by a mixture of phases, as probed by X-ray diffraction, electron microscopy and energy dispersive X-ray spectroscopy. A possible non-equilibrium phase diagram is suggested. Mainly because of the fine-grained dendritic and interdendritic microstructure, the material shows appreciable mechanical properties, such as a compressive yield strength and Young’s modulus of 245 ± 5 MPa and 63 ± 2 GPa, respectively. Due to this low Young’s modulus, the Mg67Ag33 alloy has potential for usage as biomaterial and challenges ahead, such as biomechanical compatibility, biodegradability and antibacterial properties are outlined.

Download Full-text

Effect of Nanopores on Mechanical Properties of the Shape Memory Alloy

Micromachines ◽

10.3390/mi12050529 ◽

2021 ◽

Vol 12 (5) ◽

pp. 529

Author(s):

Chunzhi Du ◽

Zhifan Li ◽

Bingfei Liu

Keyword(s):

Mechanical Properties ◽

Constitutive Model ◽

Shape Memory ◽

Young’S Modulus ◽

Residual Strain ◽

Surface Effect ◽

Young's Modulus ◽

Strain Curve ◽

Stress Strain ◽

Strength Limit

Nanoporous Shape Memory Alloys (SMA) are widely used in aerospace, military industry, medical and health and other fields. More and more attention has been paid to its mechanical properties. In particular, when the size of the pores is reduced to the nanometer level, the effect of the surface effect of the nanoporous material on the mechanical properties of the SMA will increase sharply, and the residual strain of the SMA material will change with the nanoporosity. In this work, the expression of Young’s modulus of nanopore SMA considering surface effects is first derived, which is a function of nanoporosity and nanopore size. Based on the obtained Young’s modulus, a constitutive model of nanoporous SMA considering residual strain is established. Then, the stress–strain curve of dense SMA based on the new constitutive model is drawn by numerical method. The results are in good agreement with the simulation results in the published literature. Finally, the stress-strain curves of SMA with different nanoporosities are drawn, and it is concluded that the Young’s modulus and strength limit decrease with the increase of nanoporosity.

Download Full-text

Effect of Castor Oil Impregnation on the Physical and Mechanical Properties of Bacterial Cellulose

Polymers from Renewable Resources ◽

10.1177/204124791200300102 ◽

2012 ◽

Vol 3 (1) ◽

pp. 13-26

Author(s):

Myrtha Karina ◽

Lucia Indrarti ◽

Rike Yudianti ◽

Indriyati

Keyword(s):

Mechanical Properties ◽

Tensile Strength ◽

Bacterial Cellulose ◽

Young’S Modulus ◽

Castor Oil ◽

Young's Modulus ◽

Physical And Mechanical Properties ◽

Scanning Electron Micrographs ◽

Elongation At Break ◽

Acetone Water

The effect of castor oil on the physical and mechanical properties of bacterial cellulose is described. Bacterial cellulose (BC) was impregnated with 0.5–2% (w/v) castor oil (CO) in acetone–water, providing BCCO films. Scanning electron micrographs revealed that the castor oil penetrated the pores of the bacterial cellulose, resulting in a smoother morphology and enhanced hydrophilicity. Castor oil caused a slight change in crystallinity indices and resulted in reduced tensile strength and Young's modulus but increased elongation at break. A significant reduction in tensile strength and Young's modulus was achieved in BCCO films with 2% castor oil, and there was an improvement in elongation at break and hydrophilicity. Impregnation with castor oil, a biodegradable and safe plasticiser, resulted in less rigid and more ductile composites.

Download Full-text