On the Preparation of Bovine α-Thrombin

1978 ◽  
Vol 39 (01) ◽  
pp. 193-200 ◽  
Author(s):  
Erwin F Workman ◽  
Roger L Lundblad
Keyword(s):  
Immobilized Enzyme ◽  
Catalytic Properties ◽  
Specific Activity ◽  
Guanidine Hydrochloride ◽  
Low Molecular Weight ◽  
Reversible Process ◽  
Gel Beads ◽  
Tissue Thromboplastin ◽  
C 50 ◽  
Hydrolysis Of

SummaryAn improved method for the preparation of bovine α-thrombin is described. The procedure involves the activation of partially purified prothrombin with tissue thromboplastin followed by chromatography on Sulfopropyl-Sephadex C-50. The purified enzyme is homogeneous on polyacrylamide discontinuous gel electrophoresis and has a specific activity toward fibrinogen of 2,200–2,700 N.I.H. U/mg. Its stability on storage in liquid media is dependent on both ionic strenght and temperature. Increasing ionic strength and decreasing temperature result in optimal stability. The denaturation of α-thrombin by guanidine hydrochloride was found to be a partially reversible process with the renatured species possessing properties similar to “aged” thrombin. In addition, the catalytic properties of a-thrombin covalently attached to agarose gel beads were also examined. The activity of the immobilized enzyme toward fibrinogen was affected to a much greater extent than was the hydrolysis of low molecular weight, synthetic substrates.

scholarly journals Purification and Characterization of a Novel Thermostable α-l-Arabinofuranosidase from a Color-Variant Strain of Aureobasidium pullulans

1998 ◽  
Vol 64 (1) ◽  
pp. 216-220 ◽  
Author(s):  
Badal C. Saha ◽  
Rodney J. Bothast
Keyword(s):  
Column Chromatography ◽  
Metal Ion ◽  
Aureobasidium Pullulans ◽  
Specific Activity ◽  
Gel Filtration ◽  
Variant Strain ◽  
Color Variant ◽  
C 50 ◽  
Hydrolysis Of

ABSTRACT A color-variant strain of Aureobasidium pullulans (NRRL Y-12974) produced α-l-arabinofuranosidase (α-l-AFase) when grown in liquid culture on oat spelt xylan. An extracellular α-l-AFase was purified 215-fold to homogeneity from the culture supernatant by ammonium sulfate treatment, DEAE Bio-Gel A agarose column chromatography, gel filtration on a Bio-Gel A-0.5m column, arabinan-Sepharose 6B affinity chromatography, and SP-Sephadex C-50 column chromatography. The purified enzyme had a native molecular weight of 210,000 and was composed of two equal subunits. It had a half-life of 8 h at 75°C, displayed optimal activity at 75°C and pH 4.0 to 4.5, and had a specific activity of 21.48 μmol · min−1· mg−1 of protein againstp-nitrophenyl-α-l-arabinofuranoside (pNPαAF). The purified α-l-AFase readily hydrolyzed arabinan and debranched arabinan and released arabinose from arabinoxylans but was inactive against arabinogalactan. TheKm values of the enzyme for the hydrolysis of pNPαAF, arabinan, and debranched arabinan at 75°C and pH 4.5 were 0.26 mM, 2.14 mg/ml, and 3.25 mg/ml, respectively. The α-l-AFase activity was not inhibited at all byl-arabinose (1.2 M). The enzyme did not require a metal ion for activity, and its activity was not affected byp-chloromercuribenzoate (0.2 mM), EDTA (10 mM), or dithiothreitol (10 mM).

scholarly journals Non-Specific GH30_7 Endo-β-1,4-xylanase from Talaromyces leycettanus

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4614
Author(s):  
Katarína Šuchová ◽  
Nikolaj Spodsberg ◽  
Kristian B. R. Mørkeberg Krogh ◽  
Peter Biely ◽  
Vladimír Puchart
Keyword(s):  
General Formula ◽  
Main Chain ◽  
Catalytic Properties ◽  
Specific Activity ◽  
Side Chain ◽  
Biotechnological Applications ◽  
Xylose Residue ◽  
Great Tolerance ◽  
Chain Cleavage ◽  
Hydrolysis Of

This study describes the catalytic properties of a GH30_7 xylanase produced by the fungus Talaromyces leycettanus. The enzyme is an ando-β-1,4-xylanase, showing similar specific activity towards glucuronoxylan, arabinoxylan, and rhodymenan (linear β-1,3-β-1,4-xylan). The heteroxylans are hydrolyzed to a mixture of linear as well as branched β-1,4-xylooligosaccharides that are shorter than the products generated by GH10 and GH11 xylanases. In the rhodymenan hydrolyzate, the linear β-1,4-xylooligosaccharides are accompanied with a series of mixed linkage homologues. Initial hydrolysis of glucuronoxylan resembles the action of other GH30_7 and GH30_8 glucuronoxylanases, resulting in a series of aldouronic acids of a general formula MeGlcA2Xyln. Due to the significant non-specific endoxylanase activity of the enzyme, these acidic products are further attacked in the unbranched regions, finally yielding MeGlcA2Xyl2-3. The accommodation of a substituted xylosyl residue in the −2 subsite also applies in arabinoxylan depolymerization. Moreover, the xylose residue may be arabinosylated at both positions 2 and 3, without negatively affecting the main chain cleavage. The catalytic properties of the enzyme, particularly the great tolerance of the side-chain substituents, make the enzyme attractive for biotechnological applications. The enzyme is also another example of extraordinarily great catalytic diversity among eukaryotic GH30_7 xylanases.

Immobilized Nanoparticles-Mediated Enzymatic Hydrolysis of Cellulose for Clean Sugar Production: A Novel Approach

2019 ◽  
Vol 15 (3) ◽  
pp. 296-303 ◽  
Author(s):  
Swapnil Gaikwad ◽  
Avinash P. Ingle ◽  
Silvio Silverio da Silva ◽  
Mahendra Rai
Keyword(s):  
Catalytic Activity ◽  
Enzymatic Hydrolysis ◽  
Immobilized Enzyme ◽  
Free Enzyme ◽  
Magnetic Nanomaterials ◽  
Sugar Production ◽  
Cellulase Enzyme ◽  
Enzymatic Hydrolysis Of Cellulose ◽  
Hydrolysis Of Cellulose ◽  
Hydrolysis Of

Background: Enzymatic hydrolysis of cellulose is an expensive approach due to the high cost of an enzyme involved in the process. The goal of the current study was to apply magnetic nanomaterials as a support for immobilization of enzyme, which helps in the repeated use of immobilized enzyme for hydrolysis to make the process cost-effective. In addition, it will also provide stability to enzyme and increase its catalytic activity. Objective: The main aim of the present study is to immobilize cellulase enzyme on Magnetic Nanoparticles (MNPs) in order to enable the enzyme to be re-used for clean sugar production from cellulose. Methods: MNPs were synthesized using chemical precipitation methods and characterized by different techniques. Further, cellulase enzyme was immobilized on MNPs and efficacy of free and immobilized cellulase for hydrolysis of cellulose was evaluated. Results: Enzymatic hydrolysis of cellulose by immobilized enzyme showed enhanced catalytic activity after 48 hours compared to free enzyme. In first cycle of hydrolysis, immobilized enzyme hydrolyzed the cellulose and produced 19.5 ± 0.15 gm/L of glucose after 48 hours. On the contrary, free enzyme produced only 13.7 ± 0.25 gm/L of glucose in 48 hours. Immobilized enzyme maintained its stability and produced 6.15 ± 0.15 and 3.03 ± 0.25 gm/L of glucose in second and third cycle, respectively after 48 hours. Conclusion: This study will be very useful for sugar production because of enzyme binding efficiency and admirable reusability of immobilized enzyme, which leads to the significant increase in production of sugar from cellulosic materials.

The effect of polymeric and model imidazolium halides on the rate of hydrolysis of 4-acetoxy-3-nitrobenzoic acid

1985 ◽  
Vol 50 (4) ◽  
pp. 845-853 ◽  
Author(s):  
Miloslav Šorm ◽  
Miloslav Procházka ◽  
Jaroslav Kálal
Keyword(s):  
Catalyst Concentration ◽  
Low Molecular Weight ◽  
Imidazolium Chloride ◽  
First Order ◽  
Nitrobenzoic Acid ◽  
Rate Of Hydrolysis ◽  
Acid Catalyzed ◽  
Hydrolysis Of ◽  
Ethanol In Water ◽  
Direct Attack

The course of hydrolysis of an ester, 4-acetoxy-3-nitrobenzoic acid catalyzed with poly(1-methyl-3-allylimidazolium bromide) (IIa), poly[l-methyl-3-(2-propinyl)imidazolium chloride] (IIb) and poly[l-methyl-3-(2-methacryloyloxyethyl)imidazolium bromide] (IIc) in a 28.5% aqueous ethanol was investigated as a function of pH and compared with low-molecular weight models, viz., l-methyl-3-alkylimidazolium bromides (the alkyl group being methyl, propyl, and hexyl, resp). Polymers IIb, IIc possessed a higher activity at pH above 9, while the models were more active at a lower pH with a maximum at pH 7.67. The catalytic activity at the higher pH is attributed to an attack by the OH- group, while at the lower pH it is assigned to a direct attack of water on the substrate. The rate of hydrolysis of 4-acetoxy-3-nitrobenzoic acid is proportional to the catalyst concentration [IIc] and proceeds as a first-order reaction. The hydrolysis depends on the composition of the solvent and was highest at 28.5% (vol.) of ethanol in water. The hydrolysis of a neutral ester, 4-nitrophenyl acetate, was not accelerated by IIc.

Decomposition of hydrogen peroxide on cerium dioxide-nickel oxide two-component catalysts and the effect of ionizing radiation on them

1984 ◽  
Vol 49 (1) ◽  
pp. 14-24 ◽  
Author(s):  
Viliam Múčka
Keyword(s):  
Heat Treatment ◽  
Hydrogen Peroxide ◽  
Ionizing Radiation ◽  
Nickel Oxide ◽  
Cerium Dioxide ◽  
Catalytic Properties ◽  
Specific Activity ◽  
Ion Pairs ◽  
Composition Region ◽  
Two Component

Some physical and catalytic properties of cerium dioxide-nickel oxide two-component catalysts have been studied over the entire composition region, employing the decomposition of hydrogen peroxide in aqueous solution as a model catalytic process. The two oxides have been found to affect each other, particularly for NiO contents of 9.1 and 96.7 mol%; the mutual influencing, the nature of which in the conditions applied remains unaffected by heat treatment of the sample or by its exposition to ionizing radiation, is manifested by the nonmonotonic dependences of the oxidation power and of the specific activity of the catalysts on their composition. This can be interpreted in terms of the concept of bivalent catalytic centres, assuming that for nickel oxide the centres consist of Ni2+-Ni3+ ion pairs, for cerium dioxide they consist of Ce3+-Ce4+ ion pairs, and that in the region of the mutual influencing , Ni2+-Ce4+ ion pairs play a major role. Within the scope of this concept, the increase in the oxidation power of all the catalysts in question and a simultaneously decrease in the specific activity of the pure nickeloxide exposed to ionizing radiation can be explained in terms of the ionization effect.

scholarly journals Catalytic Diversity of GH30 Xylanases

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4528
Author(s):  
Katarína Šuchová ◽  
Vladimír Puchart ◽  
Nikolaj Spodsberg ◽  
Kristian B. R. Mørkeberg Krogh ◽  
Peter Biely
Keyword(s):  
Methyl Ester ◽  
Catalytic Properties ◽  
Specific Activity ◽  
Current Knowledge ◽  
Carboxyl Group ◽  
Weak Effect ◽  
Bacterial Enzymes ◽  
Catalytic Activities ◽  
Almost All ◽  
Free Carboxyl

Catalytic properties of GH30 xylanases belonging to subfamilies 7 and 8 were compared on glucuronoxylan, modified glucuronoxylans, arabinoxylan, rhodymenan, and xylotetraose. Most of the tested bacterial GH30-8 enzymes are specific glucuronoxylanases (EC 3.2.1.136) requiring for action the presence of free carboxyl group of MeGlcA side residues. These enzymes were not active on arabinoxylan, rhodymenan and xylotetraose, and conversion of MeGlcA to its methyl ester or its reduction to MeGlc led to a remarkable drop in their specific activity. However, some GH30-8 members are nonspecific xylanases effectively hydrolyzing all tested substrates. In terms of catalytic activities, the GH30-7 subfamily is much more diverse. In addition to specific glucuronoxylanases, the GH30-7 subfamily contains nonspecific endoxylanases and predominantly exo-acting enzymes. The activity of GH30-7 specific glucuronoxylanases also depend on the presence of the MeGlcA carboxyl, but not so strictly as in bacterial enzymes. The modification of the carboxyl group of glucuronoxylan had only weak effect on the action of predominantly exo-acting enzymes, as well as nonspecific xylanases. Rhodymenan and xylotetraose were the best substrates for exo-acting enzymes, while arabinoxylan represented hardly degradable substrate for almost all tested GH30-7 enzymes. The results expand current knowledge on the catalytic properties of this relatively novel group of xylanases.

Characterization of a factor that stimulates hydrolysis of GTP bound to ras gene product p21 (GTPase-activating protein) and correlation of its activity to cell density

1988 ◽  
Vol 8 (10) ◽  
pp. 4169-4173
Author(s):  
M Hoshino ◽  
M Kawakita ◽  
S Hattori
Keyword(s):  
Gene Product ◽  
Cell Density ◽  
Cultured Cells ◽  
Specific Activity ◽  
Gtpase Activating Protein ◽  
Ras Gene ◽  
Cell Extracts ◽  
Mouse Tissues ◽  
Almost All ◽  
Hydrolysis Of

The postmicrosomal fraction of the extract from NIH 3T3 and BALB/c 3T3 cells stimulated the hydrolysis of GTP bound to H-ras gene product p21 by severalfold. The stimulation was observed with normal p21 but not with p21 with valine as the 12th residue. This specificity is similar to that of GTPase-activating protein (GAP) for N-ras p21 described by M. Trahey and F. McCormick (Science 238:542-545, 1987). Consistent with this specificity, analysis of p21-bound nucleotides in living cells revealed that almost all normal p21 bound GDP, whereas oncogenic mutant p21s bound both GTP and GDP. Similar activity was also found in various mouse tissues, with brain tissue showing the highest specific activity. When cell extracts were prepared from cultured cells, there was a linear relationship between GAP activity and cell density. These results suggest the factor is involved in the regulation of cell proliferation.

Sign in / Sign up

Export Citation Format

Share Document