k dependence of the impact ionization transition rate in bulk InAs, GaAs, and Ge

1992 ◽  
Vol 71 (6) ◽  
pp. 2736-2740 ◽  
Author(s):  
Yang Wang ◽  
Kevin F. Brennan
1995 ◽  
Vol 395 ◽  
Author(s):  
J. Kolnik ◽  
I.H. Oguzman ◽  
K.F. Brennan ◽  
R. Wang ◽  
P.P. Ruden

ABSTRACTIn this paper, we present ensemble Monte Carlo based calculations of electron initiated impact ionization in bulk zincblende GaN using a wavevector dependent formulation of the interband impact ionization transition rate. These are the first reported estimates, either theoretical or experimental, of the impact ionization rates in GaN. The transition rate is determined from Fermi’s golden rule for a two-body screened Coulomb interaction using a numerically determined dielectric function as well as by numerically integrating over all of the possible final states. The Monte Carlo simulator includes the full details of the first four conduction bands derived from an empirical pseudopotential calculation as well as all of the relevant phonon scattering mechanisms. It is found that the ionization rate has a relatively "soft" threshold.


2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Jun Yin ◽  
Lian Liu ◽  
Yashu Zang ◽  
Anni Ying ◽  
Wenjie Hui ◽  
...  

AbstractHere, an engineered tunneling layer enhanced photocurrent multiplication through the impact ionization effect was proposed and experimentally demonstrated on the graphene/silicon heterojunction photodetectors. With considering the suitable band structure of the insulation material and their special defect states, an atomic layer deposition (ALD) prepared wide-bandgap insulating (WBI) layer of AlN was introduced into the interface of graphene/silicon heterojunction. The promoted tunneling process from this designed structure demonstrated that can effectively help the impact ionization with photogain not only for the regular minority carriers from silicon, but also for the novel hot carries from graphene. As a result, significantly enhanced photocurrent as well as simultaneously decreased dark current about one order were accomplished in this graphene/insulation/silicon (GIS) heterojunction devices with the optimized AlN thickness of ~15 nm compared to the conventional graphene/silicon (GS) devices. Specifically, at the reverse bias of −10 V, a 3.96-A W−1 responsivity with the photogain of ~5.8 for the peak response under 850-nm light illumination, and a 1.03-A W−1 responsivity with ∼3.5 photogain under the 365 nm ultraviolet (UV) illumination were realized, which are even remarkably higher than those in GIS devices with either Al2O3 or the commonly employed SiO2 insulation layers. This work demonstrates a universal strategy to fabricate broadband, low-cost and high-performance photo-detecting devices towards the graphene-silicon optoelectronic integration.


2009 ◽  
Vol 615-617 ◽  
pp. 311-314 ◽  
Author(s):  
W.S. Loh ◽  
J.P.R. David ◽  
B.K. Ng ◽  
Stanislav I. Soloviev ◽  
Peter M. Sandvik ◽  
...  

Hole initiated multiplication characteristics of 4H-SiC Separate Absorption and Multiplication Avalanche Photodiodes (SAM-APDs) with a n- multiplication layer of 2.7 µm were obtained using 325nm excitation at temperatures ranging from 300 to 450K. The breakdown voltages increased by 200mV/K over the investigated temperature range, which indicates a positive temperature coefficient. Local ionization coefficients, including the extracted temperature dependencies, were derived in the form of the Chynoweth expression and were used to predict the hole multiplication characteristics at different temperatures. Good agreement was obtained between the measured and the modeled multiplication using these ionization coefficients. The impact ionization coefficients decreased with increasing temperature, corresponding to an increase in breakdown voltage. This result agrees well with the multiplication characteristics and can be attributed to phonon scattering enhanced carrier cooling which has suppressed the ionization process at high temperatures. Hence, a much higher electric field is required to achieve the same ionization rates.


1990 ◽  
Vol 57 (3) ◽  
pp. 249-251 ◽  
Author(s):  
H. Kuwatsuka ◽  
T. Mikawa ◽  
S. Miura ◽  
N. Yasuoka ◽  
Y. Kito ◽  
...  

2001 ◽  
Vol 89 (1) ◽  
pp. 327-331
Author(s):  
Eugenio F. Prokhorov ◽  
Jesus González-Hernández ◽  
Nikolai B. Gorev ◽  
Inna F. Kodzhespirova ◽  
Yury A. Kovalenko

1971 ◽  
Vol 13 ◽  
pp. 299-310
Author(s):  
J. F. Friichtenicht ◽  
N. L. Roy ◽  
D. G. Becker

Determination of the elemental composition of cosmic dust particles by means of an impact ionization time-of-flight mass spectrometer has been investigated at several institutions. In most configurations, the instrument supplies the identity of ion groups of both target and particle materials extracted from the impact plasma and the number of ions contained in each group. Experiments have shown that the fractional ionization of a given species is not constant with impact velocity nor is the fractional ionization the same for different kinds of atoms. A model of the impact ionization effect developed at TRW involves an equilibrium plasma condition with the consequence that the fractional ionization for an arbitrary atomic species can be specified by the Saha equation if the plasma volume (V) and temperature (T) are known. It follows that T can be determined by taking the ratio of the Saha equations for two elements present in the target in known concentration. (Taking the ratio negates the requirement of knowing V.) Given T, the procedure can be reversed to yield the relative abundance of elements contained in the impacting particle. To test the model, a PbZrO3-PbTiO3 target was bombarded with high velocity Fe, MoB, and NiAl particles and the number of Pb, Ti, and Zr ions was determined in a time-of-flight mass spectrometer. For each event, the relative abundance of Ti to Pb was taken as known (from electron microprobe analysis) and T was determined from the Ti-Pb measurement. The Zr to Pb ratio was found to be in good agreement with the microprobe analysis (0.38 calculated mean value compared to 0.34 actual). The result was valid for all particle materials and for a velocity range 17<v<47 km/s. T ranged from 3300 to 11 500° K and was only mildly velocity dependent.


2007 ◽  
Vol 556-557 ◽  
pp. 339-342 ◽  
Author(s):  
W.S. Loh ◽  
C. Mark Johnson ◽  
J.S. Ng ◽  
Peter M. Sandvik ◽  
Steve Arthur ◽  
...  

Hole initiated avalanche multiplication characteristics of 4H-SiC avalanche photodiodes have been studied. The diodes had n+-n-p SiC epitaxial layers grown on a p-type substrate. These 1 mm2 devices had very low dark currents and exhibited sharp breakdown at voltages of approximately 500V. The diodes multiplication characteristics appeared to be identical when the wavelength of the illuminating light from the top varied from 288 to 325nm, implying that almost pure hole initiated multiplication was occurring. The multiplication factor data were modelled using a local multiplication model with impact ionization coefficients of 4H-SiC reported by various authors. The impact ionization coefficients extracted from submicron devices by Ng et al. were found to give accurate predictions for multiplication factors within the uncertainties of the doping levels. This result suggests that their ionization coefficients can be applied to thicker bulk 4H-SiC structures.


Sign in / Sign up

Export Citation Format

Share Document