Effect of Ambient Illuminant on Surface Colour Constancy

Perception ◽  
1997 ◽  
Vol 26 (1_suppl) ◽  
pp. 221-221
Author(s):  
I Kuriki ◽  
K Uchikawa

Generally, we are completely enclosed in a real environment, which may act as an entire view-field or adapting field. But in most studies on colour constancy experiments have been made with spatially restricted stimuli. We built a room with gray (N5) walls inside to measure the effect of ambient illuminant on colour constancy. The room illuminant could change its colour from white (D65) to either blue, orange, green, or purple. The observer sat in this main room and adapted to the illuminant for 5 min before the start of the experiment. The observer was shown a smaller room, which had the same variable-colour illuminant, through an aperture (11 deg × 8 deg) in the left side wall. We set the illuminant for each room independently, but in asymmetric illuminant-colour conditions either was set to white. The observer viewed the central part of a colour CRT monitor, placed behind a small aperture (5 deg × 5 deg) in the front wall, and matched its colour appearance to four OSA colour chips in the smaller room. Under symmetric illuminant conditions, eg blue vs blue, the observers' settings showed a complete match with the physical chromaticities of the colour chips. In asymmetric illuminant conditions, eg white vs blue, matched colours showed systematic deviations from both physical chromaticities and colour constancy. This implies that taking the ambient illuminant as adapting field did not yield perfect colour constancy. We introduce a simple model based on incomplete adaptation to the ambient illuminant and a spatial-interaction mechanism, which accounts for our results.


Author(s):  
Volodymyr Ivanov ◽  
Andrii Onyshchenko ◽  
Liudmyla Ivanova ◽  
Liudmyla Zasukha ◽  
Valerii Hryhorenko

The mobile house for two-phase litter rearing piglets was developed in the conditions of pasture their housing, the feature of which is that its side walls and roof are made in the form of two similar in shape and length of arched panels. In the back wall of the inner shield is a litter box, a self-feeder for piglets, a feed unit for a sow and a wicket, and in the front wall of the outer shield are doors with a wicket. Along with this, all walls and the roof of the litter box are made of transparent plastic, and the wall located near the self-feeding trough is also made perforated. In addition, the lower edge of the side wall of the inner arch-shaped shield has slides in which the lower edge of the side wall of the outer arc-shaped shield is inserted. A house with transformable fences has been developed to rear the young pigs. The structural feature of the house is the presence on the outside of the walls of the bobbins with a metal mesh edged at the bottom with a flexible sleeve. In order to ensure the conditions of gentle etching of the vegetation cover and to prevent damage to the turf of the pasture, the house can be completed with another type of hedge consisting of two hinged sections with doors on each side of the fence. In addition, the horizontal wings are rigidly attached to the hedge and connected by a metal mesh around the perimeter, the size of the cells of which ensures that the grass is eaten but prevents the turf of the pasture from being undermined. The developed devices for camp-pasture and feeding of maternal stock, suckling pigs, weaning pigs, repair and fattening pigs are well suited for year-round closed non-waste organic pork production using cultural and natural agricultural land. Key words: housing, feeding, devices, sows, piglets, young animals, pasture, organic pork.



2011 ◽  
Vol 243-249 ◽  
pp. 2266-2270
Author(s):  
Guang Zhu Zhou ◽  
Xu Wei ◽  
Chen Yu

As a new type of building envelope, Gcrw is mainly used for excavation of foundation pit. It can stand by itself without the help of bracing, especially in soft soil area. Its stressed characteristic hasn’t been known yet. By using advanced big finite element software Abaqus/Cae, a simulation was made on model of Gcrw under soil pressure when a foundation pit is dug, while the whole excavation is divided into three continuous independent excavation stages. The result shows that Gcrw is a rather good building envelope, Gcrw and soil in the gridding form an integral earth-retaining structure and keep balance under soil pressure before or behind the structure, and have little displacement in horizontal direction. It is like a gravity-type retaining wall in its entirety, but takes on an elastic characteristic. The soil pressure presents a linear change, but its value is less than the theoretical value of calculation. The front wall of Gcrw, like a sheet, is the main flexural construction element, which is subjected to the pressure from side wall of foundation pit and produce curve deformation. The back wall of Gcrw has little displacement and almost is built in the clay. The partition wall endures the effect of the tensile force, its horizontal deformation increases with the build-in depth’s increasing. The back wall and the partition wall play a very important role in dragging back the front wall, the role of them is similar to a pair of anchor tie. The soil in the gridding not only provides soil pressure, but also can fix the back wall, so it is seen as a part of Gcrw and in favor of the Gcrw’s anti-overturn.



Perception ◽  
1996 ◽  
Vol 25 (2) ◽  
pp. 229-241 ◽  
Author(s):  
David I Bramwell ◽  
Anya C Hurlbert

Colour constancy is typically measured with techniques involving asymmetric matching by adjustment, in which the observer views two scenes under different illuminants and adjusts the colour of a reference patch in one to match a test patch in the other. This technique involves an unnatural task, requiring the observer to predict and adjust colour appearance under an illumination shift. Natural colour constancy is more a simple matter of determining whether a colour is the same as or different from that seen under different illumination conditions. There are also technical disadvantages to the method of matching by adjustment, particularly when used to measure colour constancy in complex scenes. Therefore, we have developed and tested a two-dimensional method of constant-stimuli, forced-choice matching paradigm for measuring colour constancy. Observers view test and reference scenes haploscopically and simultaneously, each eye maintaining separate adaptation throughout a session. On each trial, a pair of test and reference patches against multicoloured backgrounds are presented, the reference patch colours being selected from a two-dimensional grid of displayable colours around the point of perfect colour constancy. The observer's task is to respond “same” or “different”. Fitting a two-dimensional Gaussian to the percentage of “different” responses yields (1) the subjective colour-constancy point, (2) the discrimination ellipse centred on this point, and (3) a map of changes in sensitivity to chromatic differences induced by the illuminant shift. The subjective colour-constancy point measured in this way shows smaller deviations from perfect colour constancy—under conditions of monocular adaptation—than previously reported; discrimination ellipses are several times larger than standard MacAdam ellipses; and chromatic sensitivity is independent of the direction of the illuminant shift, for broad distributions of background colours.



2013 ◽  
Vol 734-737 ◽  
pp. 1752-1756
Author(s):  
Kai Yong She ◽  
Wen Jun Chen

Exploratory Spatial Data Analysis was used to analyze the evolvement of spatia1 pattern on coal consumption in China since 2002. General spatial autocorrelation of coal consumption in 31 provinces of China was analyzed by Morans I and Getis-Ord General G. Getis-0rd Gi* was used to test the local spatial dependence, identifying the spatial distribution of hot spots and cold spots. The results show that coal consumption per capita of 31 provinces in China exhibits an enhanced trend of spatial autocorrelation. The areas with similar level of coal consumption are clustered in space. The coal consumption activity can be affected by the neighborhoods and their own regions. Hotspot areas are mainly concentrated in North and Northeast China and continuously increase with time, coldspot areas are mainly concentrated in South China and constantly decrease by time. So government needs to consider the spatial interaction mechanism of coal consumption when establishing the energy management policy.



2012 ◽  
Vol 538-541 ◽  
pp. 3165-3169
Author(s):  
Yuan Zhou Zheng ◽  
Yan Ling Huang ◽  
Kai Zhou Peng

The design of Superstructure constructed with aluminum alloy do not have to follow the traditional standard design method. It can be designed by applying strength theory and ANSYS program or MSC Patran / Nastran program, which can ensure the strength requirements with the selected aluminum alloy components and make the weight of the ship lightest. In this paper, the 42.4m catamaran sightseeing boat is used as an example. The structural strength of the superstructure constructed with aluminum alloy is calculated by MSC Patran / Nastran program. The distribution of the superstructure stress is obtained, which proved the size of the selected components of the superstructure can meet the requirements of the local strength and can be the reference of selecting the structure size. As the other conditions are unchanged, the the local thickness of the junction of the front wall and the side wall of the compass deck is changed. the relationship between plate thickness and stress is obtained. It is found that as The plate thickness is thicker, the stress there decreases; and as the thickness is smaller, it is obvious to reduce stress as the plate thickness Increase. when the thickness increases to a certain extent, the effect of the plate stress decreases is not obvious.



Psichologija ◽  
2007 ◽  
Vol 35 ◽  
pp. 96-110
Author(s):  
Aušra Daugirdienė ◽  
Rytis Stanikūnas ◽  
Henrikas Vaitkevičius ◽  
Ian J. Murray ◽  
Janus J. Kulikowski

Straipsnyje keliame hipotezę, kad spalvos suvokimo konstantiškumas, kaip procesas, turi dvi sudedamąsias dalis: lokalų ir globalų procesą. Lokalus procesas – tai skirtumas tarp fono ir spalvoto objekto (mūsų tyrimuose – Manselio pavyzdėlio). Šis procesas nuo adaptacijos nepriklauso ir vyksta tik nedideliame regėjimo lauke. Kitas procesas vyksta bėgant laikui, kai kinta suvokiama spalva. Tai fono spalva. Stebėtojas ją įvertina kaip viso regėjimo lauko spalvinį parametrą, todėl pastarasis procesas – globalus. Spalvų suvokimo konstantiškumo eksperimente abu procesus tyrėme asimetriniu stimulų lyginimo metodu. Bandymams naudojome 7 skirtingus plataus spektro apšvietimo šaltinius. Dviejose skirtingose bandymų serijose testiniai stimulai – Manselio 7/4 pavyzdėliai, buvo generuojami monitoriaus ekrane. Bandymuose dalyvavo penki tiriamieji. Spalvų suvokimo konstantiškumas buvo įvertinamas Brunsviko santykiu (BR). Gauti rezultatai rodo, kad adaptaciniai pokyčiai nevyksta, kai tiriamųjų regos lauke yra „tuščioji aplinka“. Pašalinus „tuščiąją aplinką“, spalvų suvokimo konstantiškumas pagerėja, BR tampa artimas 1. Remdamies bandymų rezultatais galime teigti, kad yra du skirtingi spalvos suvokimo procesai. Vienas yra greitas, beveik šuoliškas, nulemtas kontrasto, o kitas lėtesnis, adaptacinio pobūdžio, aiškiai pastebimas po 30 s. Spalvos pokytis (adaptacija) dar įvertinamas oponentinių signalų atsakų apskaičiavimu. Pagrindiniai žodžiai: spalvų suvokimo konstantiškumas, kontrastas, adaptacija, Manselio pavyzdėliai.Factors of Colour Perception Constancy: Contrast and Background AdaptationAušra Daugirdienė, Rytis Stanikūnas, Henrikas Vaitkevičius, Ian J. Murray, Janus J. Kulikowski SummaryColour constancy is the ability of the human visual system to comprehend the constant colour of an object with no regard to changes in the illumination spectrum. Each year witnesses the appearance of new scientific works in various countries. The works touch upon different aspects of the phenomenon. Although scientific research has been conducted for many years, there is no recognised theory explaining the mechanisms that are decisive for colour constancy. The aim of the present work was to establish the influence of contrast, adaptation and background structure upon colour constancy.All experiments were performed with the application of asymmetric matching. Five subjects took part in the experiments. Colour constancy was examined by performing experiments in three cycles. The test illuminants were two Planckian illuminants, standard illuminant A (u’= 0.2559, v’ = 0.5243), illuminant S (u’= 0.1744, v’= 0.3923) and illuminants r (u’/v’ = 0.2618/0.4533), g (u’/v’ = 0.1517/0.4667), v (u’/v’ = 0.2116/0.3766), y (u’/v’ = 0.1939/0.5180. The first set of 7/4 (value – 7/, chroma – /4) of 10 Munsell samples served as test stimuli in the experiments of the second cycle. Being 2° in size, they were generated in the centre of the monitor. The samples were surrounded by a neutral background, sized N7 20° (N meaning the colour being neutral, with the value of 7). Around the neutral background, subject of the experiment saw the non-radiating part of the screen, which we called the „black surround“ (Fig. 1). In the second set of the experiment, the subjects observed the stimuli througha cardboard tube (Fig. 2). Neutral N7 Munsell samples and a set of 7/4 (value – 7/, chroma – /4) of 10 Munsell samples served as test stimuli in the experiments of the third cycle.Colour constancy is quantitively evaluated on the basis of the Brunswik Ratio (BR) (Troost and de Weert, 1991). Higher values of BR were associated with longer adaptation periods, but only when a larger background was used (second cycle of experiments (Fig. 7)). Supplementary experiments showed that the changes in colour appearance were related to a slight shift in the perceived colour of the background. The timing of the colour shifts was modelled in terms of coneopponentresponses.Our conclusions are:1. When stimuli are exposed for a short period of time (1 s), partial colour constancy takes place. It does not change (or changes insignificantly) when the stimulus is observed for a longer time (5 and 30 s). Such colour constancy is determined by fast processes which confirm the influence of simultaneous contrast on colour constancy.2. When the background is small, the influence of adaptation on colour constancy is little, even it the observation time is long (5 or 30 s).3. When the background fills the entire field of vision, adaptation results in a high colour constancy perception.Key words: colour constancy, contrast, adaptation, Munsell samples.



2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Raquel Gil Rodríguez ◽  
Florian Bayer ◽  
Matteo Toscani ◽  
Dar’ya Guarnera ◽  
Giuseppe Claudio Guarnera ◽  
...  

AbstractVirtual reality (VR) technology offers vision researchers the opportunity to conduct immersive studies in simulated real-world scenes. However, an accurate colour calibration of the VR head mounted display (HMD), both in terms of luminance and chromaticity, is required to precisely control the presented stimuli. Such a calibration presents significant new challenges, for example, due to the large field of view of the HMD, or the software implementation used for scene rendering, which might alter the colour appearance of objects. Here, we propose a framework for calibrating an HMD using an imaging colorimeter, the I29 (Radiant Vision Systems, Redmond, WA, USA). We examine two scenarios, both with and without using a rendering software for visualisation. In addition, we present a colour constancy experiment design for VR through a gaming engine software, Unreal Engine 4. The colours of the objects of study are chosen according to the previously defined calibration. Results show a high-colour constancy performance among participants, in agreement with recent studies performed on real-world scenarios. Our studies show that our methodology allows us to control and measure the colours presented in the HMD, effectively enabling the use of VR technology for colour vision research.



Author(s):  
B.Ch. Meskhi ◽  
◽  
Yu.I. Bulygin ◽  
V.V. Maslensky ◽  
I.N. Loskutnikova ◽  
...  

The tendency of increasing of radiation sources power in metallurgy leads to an increase in the level of thermal radiation at the crane operator workplaces. The state of their health is characterized by a decrease in physical performance, the occurrence of colds, and occupational diseases of the cardiovascular and respiratory systems. Therefore, it is necessary to evaluate the thermal radiation regime of the crane operator workplace for further justification of the choice of the method and means of thermal protection. To assess the thermal irradiation of the metallurgical crane cabin, along with the method of building the thermal irradiation plot, the finite element method was used which was integrated into the automated software package ANSYS, into its plug-in Fluid Flow (Fluent) designed to build models of convective energy transfer by a liquid or gas flow. Flow turbulence is described by the Shear Stress Transport (SST) model. The article examines the thermal radiation situation in the steelmaking shop, which determines the choice of means to ensure an optimal microclimate at the crane operator workplace. It was revealed that the thermal radiation and the temperature of the railings of the metallurgical crane cabin significantly exceed the maximum permissible level, as a result of which it became impossible to choose a climate system that provides for a comfortable air temperature inside the cabin. To reduce the thermal load on the designed climate system, thermal protection elements are introduced into the design of the metallurgical crane cabin, such as a heat-reflecting screen of the floor and side wall and double glazing of the front wall. Then a high-temperature industrial air conditioner was selected, the efficiency of which was confirmed by the results of computer simulation. Thus, for a reasonable choice of the climate system of a metallurgical crane cabin, it is required to have rational combination of the methods and means of thermal protection used at the equipment design stage.



2017 ◽  
Vol 18 (2) ◽  
pp. 103
Author(s):  
Hery Hamdi Azwir

PT. United Tractors Pandu Engineering (UTE) merupakan perusahaan yang bergerak dalam bidang pembuatan dan penyedia jasa attachment alat berat. Pada beberapa bulan terakhir ini perusahaan yang sedang mengalami peningkatan produksi, juga mengalami masalah terkait pemenuhan kebutuhan komponen produksi. Salah satu produk andalannya, yakni Tipper Vessel (TV) 24m3, mengalami kendala dalam hal pemenuhan kebutuhan komponen oleh supplier. Perusahaan perlu menambah supplier baru untuk memenuhi kebutuhan tersebut, dan melakukan pemesanan dengan membagi beberapa komponen ke beberapa supplier dengan menggunakan sistem yang baru. Saat ini perusahaan memiliki dua supplier, yakni PT. United Engineers Indonesia dan PT. Jaya Perkasa Auto Indonesia, serta satu kandidiat supplier baru, yakni PT. Mario Mikron. Dalam melakukan pembagian supplier ini perusahaan mempunyai empat kriteria yaitu tingkat reject, transaksi pembayaran, pengiriman dan harga. Pengolahan data pada proses pembagian supplier ini menggunakan kuesioner dengan perbandingan berpasangan serta data historis mengenai performansi ketiga supplier yang akan digunakan oleh perusahaan. Pada proses pemilihan supplier ini digunakan metode Analytic Network Process (ANP), yang merupakan pengembangan dari metode Analytic Hierarchy Process (AHP). Pada metode ANP ini mampu memperbaiki kelemahan dari metode AHP. Metode ANP ini mampu mengakomodasi keterkaitan antar kriteria atau alternatif. Keterkaitan pada metode ANP ada dua (2) jenis yaitu keterkaitan dalam satu set elemen (inner dependence) dan keterkaitan antar elemen yang berbeda (outer dependence). Hasil dari perhitungan menggunakan metode ANP dihasilkan Part terpilih untuk PT. Jaya Perkasa Auto Indonesia adalah : Front Wall dan Hinge Bracket. Part terpilih untuk PT. United Engineers Indonesia adalah Side Wall RH/LH, Bottom, Tail Gate dan part terpilih untuk PT. Mario Mikron  adalah : Subframe. Perancangan sistem pemilihan supplier memberikan langkah pemilihan supplier berdasarkan dua belas (12) langkah yang dapat dilakukan oleh perusahaan, dan dapat dilakukan pembagian pemesanan berdasarkan supplier pada langkah pengaturan pembelian.



2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Jong-In Lee ◽  
Young-Taek Kim ◽  
Sungwon Shin

This study presents wave height distribution in terms of stem wave evolution phenomena on partially perforated wall structures through three-dimensional laboratory experiments. The plain and partially perforated walls were tested to understand their effects on the stem wave evolution under the monochromatic and random wave cases with the various wave conditions, incident angle (from 10 to 40 degrees), and configurations of front and side walls. The partially perforated wall reduced the relative wave heights more effectively compared to the plain wall structure. Partially perforated walls with side walls showed a better performance in terms of wave height reduction compared to the structure without the side wall. Moreover, the relative wave heights along the wall were relatively small when the relative chamber width is large, within the range of the chamber width in this study. The wave spectra showed a frequency dependency of the wave energy dissipation. In most cases, the existence of side wall is a more important factor than the porosity of the front wall in terms of the wave height reduction even if the partially perforated wall was still effective compared to the plain wall.



Sign in / Sign up

Export Citation Format

Share Document