Repositioning gas in the power generation mix

2018 ◽  
Vol 58 (2) ◽  
pp. 647
Author(s):  
Martin Wilkes

Since the turn of the century, gas has been highlighted as the transition fuel to a lower emissions world, and, in 2011, the International Energy Agency published a special report entitled ‘Are we entering the golden age of gas’, which indicated that gas use could rise by over 50% to provide more than 25% of world energy demand by 2035. Even though gas use has risen in tandem with the increase in renewable energy, over the past decade, coal has been the fastest growing fuel because developing countries choose cheap power to provide their growing energy needs. Gas has been, and continues to be, subject to a green, cheap squeeze; squeezed by cleaner renewables on the one hand, and cheaper coal on the other. This paper will look at the impact that increasing amounts of renewable energy has on existing power generation and supply systems, and provide insights into the potential range of outcomes in emission levels, and the need to not only discuss renewable energy target, but to also understand the total energy mix, and the need to reposition gas from a transition fuel to the natural long-term companion of renewables.

Author(s):  
Piotr Gradziuk ◽  
Błażej Jendrzejewski

The aim of this study was to assessment of the impact of EU climate and energy policy changes on the biofuels sector. The research was carried out on the basis of the reports of the Ministry of Energy, the Ministry of Agriculture and Rural Development, the Energy Regulatory Office, the Central Statistical Office of Poland, the EU Commission, the International Renewable Energy Agency and the International Energy Agency. Tabular and descriptive methods were used. Analyzes covered the years 2007-2015 with perspective until 2030. The analyzes show that realization of assumed obligations in relation to the minimum share of renewable energy used by transportation according to the directive 2009/28/WE of 23 February 2017 may be difficult to be achieve within the proposed deadlines. Currently existing advanced biofuel installations are mainly small prototype devices. Commercialization of those installations would pose a number of threats which could make impossible to reach the assumed production capacity.


Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2906 ◽  
Author(s):  
George E. Halkos ◽  
Eleni-Christina Gkampoura

The world’s ever-increasing population, combined with economic and technological growth and a new, modern way of life, has led to high energy demand and consumption. Fossil fuels have been the main energy source for many years, but their use has many negative impacts on the environment. This has made the transition to renewable energy sources necessary in order to address climate change and meet the 1.5 °C goal. This paper is a review of the different types of renewables, their potentials and limitations, and their connection to climate change, economic growth, and human health. It also examines consumers’ willingness to pay for renewables in different countries, based on the existing literature. IEA (International Energy Agency) data are analyzed, concerning renewables’ current use, the evolution of their usage, and forecasts about their future usage. Finally, policies and strategies are recommended in order to address climate change and fully integrate renewables as a sustainable energy source.


2019 ◽  
Vol 1 (1) ◽  
pp. 33-40
Author(s):  
Ömer Faruk Ulusoy ◽  
Erkan Pektaş

Energy efficiency is a set of measures to prevent the loss of energy in gas, steam, air and electricity, to reduce energy demand by recycling and evaluating various wastes, or to reduce production by advanced technology, more efficient energy resources, advanced industrial processes, and energy recovery.  The International Energy Agency announced that world energy consumption increased by 45% since 1980 and would be 70% higher by 2030 [1]. The energy policy of the future will be on saving, energy efficiency and renewable energy trilogy. Today, with the industrial revolution, the environmental problems and the damages caused by the world we live in today have reached the dimensions that threaten human health and ecological balance. Considering that the energy consumed in the world is in buildings, every measure that reduces energy consumption is very important in terms of improving life conditions. For this purpose, the importance of renewable energy sources in the design of energy architecture principles in energy efficiency and sustainable environments is stated.


Author(s):  
Rabindra Pokhrel ◽  
Jorge Gonzalez

Abstract The International Energy Agency (IEA) predicts the cooling requirement for buildings globally increases by three-fold by 2050 without additional policy interventions. The impacts of these increases for energy demand for human comfort are more pronounced in the Caribbean, where building energy demands often exceed 50% of the total electricity. This study presents mid-of century and end of century cooling demand projections along with demand alleviation measures for San Juan Metropolitan Area of the Caribbean Island of Puerto Rico using a high-resolution configuration of the Weather Research and Forecasting (WRF) model coupled with Building Energy Model (BEM) forced by bias-corrected Community Earth Systems Model (CESM1) global simulations. The World Urban Database Access Portal Tool (WUDAPT) Land Class Zones (LCZ) is used for urban classes and the MODIS land covers land use is depicted for all-natural classes. Energy mitigation options explored include the integration of solar power in buildings, the use of white roofs, and high-efficiency HVAC systems. The impact of climate change is simulated to increase minimum temperatures at the same rate as maximum temperatures. However, the maximum temperatures are projected to rise by 1-1.5C and 2C for mid and end-of-century, respectively, increasing peak AC demand by 12.5% and 25%, correspondingly. However, the explored mitigation options surpass both increases in temperature and AC demand. The AC demand reduction potential with energy mitigation options for 2050 and 2100 decreases the need by 13% and 1.5% with the historical periods.


2021 ◽  
Vol 7 (3) ◽  
Author(s):  
Shakib Hassan Eon ◽  
Shakib Hassan Eon ◽  
Shakib Hassan Eon

Renewable energy generation is no more an alternative rather it becomes a choice for the power generation to meet the upcoming energy demand. Considering the non- renewable energy unavailability, as well as, the environmental impact, renewable energy should be the first choice. Most of the power generation in Bangladesh comes from nonrenewable energy and a noticeable amount of energy is imported from abroad. As a developing country, it is not cost-efficient and never ensures energy security. To ensure long-term energy security, it is time to shift power generation from nonrenewable to renewable energy generation. This paper presents an approximate calculation for the renewable power generating plant cost and returning year. The cost calculation is done in the context of Bangladesh.


2016 ◽  
Vol 2 (3) ◽  
pp. 37-53
Author(s):  
Yves Rocha De Salles Lima ◽  
Tatiane Stellet Machado ◽  
Joao Jose de Assis Rangel

The objetive of this work is to analyze the variation of CO2 emissions and GDP per capita throughout the years and identify the possible interaction between them. For this purpose, data from the International Energy Agency was collected on two countries, Brazil and the one with the highest GDP worldwide, the United States. Thus, the results showed that CO2 emissions have been following the country’s economic growth for many years. However, these two indicators have started to decouple in the US in 2007 while in Brazil the same happened in 2011. Furthermore, projections for CO2 emissions are made until 2040, considering 6 probable scenarios. These projections showed that even if the oil price decreases, the emissions will not be significantly affected as long as the economic growth does not decelerate.


2020 ◽  
Vol 197 ◽  
pp. 02008
Author(s):  
Giacomo Cillari ◽  
Fabio Fantozzi ◽  
Alessandro Franco

Data from the International Energy Agency confirm that in a zero-energy perspective the integration of solar systems in buildings is essential. The development of passive solar strategies has suffered the lack of standard performance indicators and design guidelines. The aim of this paper is to provide a critical analysis of the main passive solar design strategies based on their classification, performance evaluation and selection methods, with a focus on integrability. Climate and latitude affect the amount of incident solar radiation and the heat losses, while integrability mainly depends on the building structure. For existing buildings, shading and direct systems represent the easiest and most effective passive strategies, while building orientation and shape are limited to new constructions: proper design can reduce building energy demand around 40%. Commercial buildings prefer direct use systems while massive ones with integrated heat storage are more suitable for family houses. A proper selection must consider the energy and economic balance of different building services involved: a multi-objective evaluation method represents the most valid tool to determine the overall performance of passive solar strategies.


2021 ◽  
Vol 44 (1) ◽  
pp. 11-17
Author(s):  
Sheldon Marshall ◽  
Randy Koon Koon

The integration of renewable energy (RE) into the overall energy mix of Caribbean nations has been increasing in recent times. The volatile nature of the carbon-based industry through fluctuations in prices of fossil fuel based-products renders it necessary to promote an aggressive energy profile transition to renewable energy, as this is crucial to energy security in these vulnerable Small Island Developing States (SIDS). The nation of Barbados has notably understood this reality and, as such, its government has endorsed the approach of 100% RE implementation by 2030. This paper explores three distinctive annual growth rate (AGR) scenarios to assess the impact on the expected power generation, economic and environmental parameters through the period of 2019-2030. Notable findings at a high case scenario for 2030 (at an AGR of 3%) projects a power generation of 1.343 Tera-watts-hour (TWh), which will displace 790,500 barrels of oil equivalent (boe), resulting in an abatement of approximately 0.95 million tons of carbon dioxide into the atmosphere.


Author(s):  
Praveen Cheekatamarla ◽  
Vishaldeep Sharma ◽  
Bo Shen

Abstract Economic and population growth is leading to increased energy demand across all sectors – buildings, transportation, and industry. Adoption of new energy consumers such as electric vehicles could further increase this growth. Sensible utilization of clean renewable energy resources is necessary to sustain this growth. Thermal needs in a building pose a significant challenge to the energy infrastructure. Supporting the current and future building thermal energy needs to offset the total electric demand while lowering the carbon footprint and enhancing the grid flexibility is presented in this study. Performance assessment of heat pumps, renewable energy, non-fossil fuel-based cogeneration systems, and their hybrid configurations was conducted. The impact of design configuration, coefficient of performance (COP), electric grid's primary energy efficiency on the key attributes of total carbon footprint, life cycle costs, operational energy savings, and site-specific primary energy efficiency are analyzed and discussed in detail.


Author(s):  
Altan Kolbay

In this chapter, the correlation of growth in population, economic welfare, and increase in the energy demand is evaluated with examples. The biggest concern of mankind is which sources cover the immense energy demand. It is obvious that fossil fuels are the base energy source, and in order to supply developing energy needs, serious investments are needed in the energy sector. That is why the results of monetary aspects in energy prices and the conditions in leading supplier countries are also evaluated.


Sign in / Sign up

Export Citation Format

Share Document