Structure of the Stigma and Style of the Avocado

1978 ◽  
Vol 26 (5) ◽  
pp. 663 ◽  
Author(s):  
M Sedgley ◽  
MS Buttrose
Keyword(s):  
Electron Microscopy ◽  
Smooth Endoplasmic Reticulum ◽  
Freeze Fracture ◽  
Persea Americana ◽  
Transmitting Tissue ◽  
Intercellular Substance ◽  
Thin Sections ◽  
Transmission Electron ◽  
Tissue Cells ◽  
Stigma Secretion

The structure of the stigma and style of the avocado (Persea americana Mill.) was investigated by light microscopy, scanning electron microscopy and transmission electron microscopy of thin sections and freeze-fracture replicas. The stigmalstyle was asymmetrical and a groove, lined with transmitting tissue, extended the whole length of the structure. Stigma papillae fringed this groove for about a third of its length. There was no clear distinction between stigma papillae and stylar transmitting tissue cells but there was a gradation of structure down the axis. The papilla cells were long with large and small vacuoles; the transmitting tissue cells had small vacuoles only. The stigma secretion and intercellular substance of the transmitting tissue contained carbohydrate and lipid. Clusters of plastids with little internal structure and electron-dense stroma were abundant in the cells of the stigma and transmitting tissue along with extensive smooth endoplasmic reticulum. Both single vesicles and multivesicular bodies were observed fusing with the plasmalemma which was abnormally rough in freeze-fracture profiles. It is suggested that the cells of the stigma and transmitting tissue have a largely secretory function and may be approaching or have reached senescence when the flower opens.

Structural changes in the pollinated and unpollinated avocado stigma and style

1979 ◽  
Vol 38 (1) ◽  
pp. 49-60
Author(s):  
M. Sedgley
Keyword(s):  
Structural Changes ◽  
Tube Wall ◽  
Light And Electron Microscopy ◽  
Pollen Tubes ◽  
Persea Americana ◽  
Initial Contact ◽  
Transmitting Tissue ◽  
Intercellular Substance ◽  
Pollen Tube Wall ◽  
Stigma Secretion

Structural changes in the pollinated and unpollinated avocado (Persea americana Mill) stigma and style up to 42 h after first opening of the flower were investigated using light and electron microscopy. The pollen tubes grew in the stigma secretion and intercellular substance and initial contact occurred between the plasma membrane of the male and the cuticle and stigma secretion of the female. The pollen tube wall started to develop 15 min after pollination and increased in thickness up to 24 h after pollination. By 18 h after first opening of the flower, starch had disappeared and cell wall thickenings were present in both the pollinated and unpollinated stigma and style. The wall thickenings developed more slowly in the unpollinated than in the pollinated tissue. They contained lipid and were bounded by callose. Degeneration of the cytoplasm of some of the papilla and transmitting tissue cells occurred only following the passage of the pollen tubes and may be of importance in tube nutrition. There was no degeneration in the unpollinated stigma and style and the cytoplasm did not start to lose clarity until 42 h after first opening of the flower.

Ultrastructure of the dormant and germinating sporangiospore of Phascolomyces articulosus (Mucorales)

1978 ◽  
Vol 56 (7) ◽  
pp. 747-753 ◽  
Author(s):  
P. Jeffries ◽  
T. W. K. Young
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Freeze Fracture ◽  
Spore Wall ◽  
Wall Layer ◽  
Thin Sections ◽  
Transmission Electron ◽  
Sporangial Wall ◽  
Scanning Electron

Using results obtained with light and scanning electron microscopy of critical-point-dried material and transmission electron microscopy of carbon replicas and freeze-fracture and ultra-thin sections, the structure and germination of the sporangiospore of Phascolomyces articulosus Boedijn is described. The sporangial wall is trilaminate and the ornamented spore wall is two layered. During germination, a new wall layer develops between the plasmalemma and the original spore wall. Sporangial structure is related to that of other members of the Thamnidiaceae and the use of germinating spores of P. articulosus for infection studies of the mycoparasite Piptocephalis unispora is indicated.

Intercellular junctions in the larval epidermis of the colonial ascidian Distaplia occidentalis: a thin-section and freeze-fracture examination

1986 ◽  
Vol 64 (1) ◽  
pp. 112-117 ◽  
Author(s):  
Michael J. Cavey ◽  
Richard L. Wood
Keyword(s):  
Electron Microscopy ◽  
Freeze Fracture ◽  
Intercellular Junctions ◽  
Epidermal Cells ◽  
Cellular Membranes ◽  
Colonial Ascidian ◽  
Thin Sections ◽  
Intramembranous Particles ◽  
Transmission Electron ◽  
Columnar Cells

The larval epidermis of the colonial ascidian Distaplia occidentalis is a unilayered epithelium consisting of squamous and cuboidal or low columnar cells. The epidermal cells are laterally folded and interdigitated or overlapped. The occluding (tight) junctions and the close (gap) junctions that join the epidermal cells have been examined by transmission electron microscopy. In thin sections, the occluding junction is represented by focal fusions of the apposed plasmalemmata. Freeze-fracture replicas of the occluding junction show linear, anastomosing arrays of intramembranous particles on the protoplasmic faces of the cellular membranes. In thin sections of the close junction, the apposed plasmalemmata are mutually parallel and separated by a narrow intercellular cleft. Freeze-fracture replicas of the close junction reveal macular aggregations of intramembranous particles on the protoplasmic faces of the cellular membranes.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Dislocations in alumina deformed by prismatic slip

1978 ◽  
Vol 36 (1) ◽  
pp. 606-607
Author(s):  
J. Cadoz ◽  
J. Castaing ◽  
J. Philibert
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Basal Slip ◽  
Prismatic Slip ◽  
Compression Tests ◽  
Thin Sections ◽  
Burgers Vector ◽  
Maximum Deformation ◽  
Transmission Electron ◽  
Mechanical Thinning

Plastic deformation of alumina has been much studied; basal slip occurs and dislocation structures have been investigated by transmission electron microscopy (T.E.M.) (1). Non basal slip has been observed (2); the prismatic glide system <1010> {1210} has been obtained by compression tests between 1400°C and 1800°C (3). Dislocations with <0110> burgers vector were identified using a 100 kV microscope(4).We describe the dislocation structures after prismatic slip, using high voltage T.E.M. which gives much information.Compression tests were performed at constant strainrate (∿10-4s-1); the maximum deformation reached was 0.03. Thin sections were cut from specimens deformed at 1450°C, either parallel to the glide plane or perpendicular to the glide direction. After mechanical thinning, foils were produced by ion bombardment. Details on experimental techniques can be obtained through reference (3).

Cryomicroscopy of multiphase latices

1991 ◽  
Vol 49 ◽  
pp. 1060-1061
Author(s):  
O. L. Shaffer ◽  
M.S. El-Aasser ◽  
C. L. Zhao ◽  
M. A. Winnik ◽  
R. R. Shivers
Keyword(s):  
Electron Microscopy ◽  
Radiation Damage ◽  
Freeze Fracture ◽  
Particle Morphology ◽  
Second Stage ◽  
Transmission Electron ◽  
Important Approach ◽  
Carbon Coated ◽  
Preparation Techniques

Transmission electron microscopy is an important approach to the characterization of the morphology of multiphase latices. Various sample preparation techniques have been applied to multiphase latices such as OsO4, RuO4 and CsOH stains to distinguish the polymer phases or domains. Radiation damage by an electron beam of latices imbedded in ice has also been used as a technique to study particle morphology. Further studies have been developed in the use of freeze-fracture and the effect of differential radiation damage at liquid nitrogen temperatures of the latex particles embedded in ice and not embedded.Two different series of two-stage latices were prepared with (1) a poly(methyl methacrylate) (PMMA) seed and poly(styrene) (PS) second stage; (2) a PS seed and PMMA second stage. Both series have varying amounts of second-stage monomer which was added to the seed latex semicontinuously. A drop of diluted latex was placed on a 200-mesh Formvar-carbon coated copper grid.

Some early history of replica techniques for electron microscopy

1992 ◽  
Vol 50 (2) ◽  
pp. 1076-1077
Author(s):  
Robert M. Fisher
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Optical Microscope ◽  
Early History ◽  
Bulk Materials ◽  
Thin Sections ◽  
Transmission Electron ◽  
Reflected Light ◽  
History Of ◽  
Electron Microscopes

By 1940, a half dozen or so commercial or home-built transmission electron microscopes were in use for studies of the ultrastructure of matter. These operated at 30-60 kV and most pioneering microscopists were preoccupied with their search for electron transparent substrates to support dispersions of particulates or bacteria for TEM examination and did not contemplate studies of bulk materials. Metallurgist H. Mahl and other physical scientists, accustomed to examining etched, deformed or machined specimens by reflected light in the optical microscope, were also highly motivated to capitalize on the superior resolution of the electron microscope. Mahl originated several methods of preparing thin oxide or lacquer impressions of surfaces that were transparent in his 50 kV TEM. The utility of replication was recognized immediately and many variations on the theme, including two-step negative-positive replicas, soon appeared. Intense development of replica techniques slowed after 1955 but important advances still occur. The availability of 100 kV instruments, advent of thin film methods for metals and ceramics and microtoming of thin sections for biological specimens largely eliminated any need to resort to replicas.

The morphogenesis of avian tendon

1956 ◽  
Vol 144 (917) ◽  
pp. 556-572 ◽  
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Relative Volume ◽  
Morphological Features ◽  
Collagen Fibrils ◽  
Intercellular Spaces ◽  
Intercellular Substance ◽  
Thin Sections ◽  
Cellular Components ◽  
Development Proceeds

Observations by electron microscopy on thin sections of the metatarsal tendon of embryonic fowls show that in the 8-day embryo the earliest definable collagen fibrils of 80 Å in diameter are intimately associated with the cytoplasm of the compact, apparently syncytial, cells of which the tendon rudiment is composed. As development proceeds, some intracytoplasmic groups of fibrils are distinguishable, but intercellular spaces also develop and these gradually become filled with fibrils; finally, bundles are formed and lie packed between the adjacent cells. Soon the extracellular organization predominates until at 20days the average diameter of the fibrils is 400 Å and the normal 640 Å periodicity of collagen has been achieved. The morphological features demonstrated have been correlated with histochemical data, and the possible function of the various cellular components in the formation of the intercellular substance has been discussed. By the use of sections in which fibrils have been cut exactly transverse to the bundle axis it has been shown that each fibril is invested by interfibrillar material. As the diameter of the fibrils increases with age the relative volume of interfibrillar material within a bundle diminishes; it is therefore concluded that this material must contain either collagen or the necessary precursors in order to account for the enlargement of the fibrils. Thus the interfibrillar material is of fundamental importance to the formation and growth of the collagen fibrils.

Anatomy of the Unpollinated and Pollinated Watermelon Stigma

1982 ◽  
Vol 54 (1) ◽  
pp. 341-355
Author(s):  
M. SEDGLEY
Keyword(s):  
Electron Microscopy ◽  
Endoplasmic Reticulum ◽  
Light And Electron Microscopy ◽  
Freeze Fracture ◽  
Pollen Grain ◽  
Acidic Polysaccharides ◽  
Before And After ◽  
Em Autoradiography ◽  
Pollen Grain Wall ◽  
Stigma Secretion

The structure of the watermelon stigma before and after pollination was studied using light and electron microscopy, freeze-fracture and autoradiography. The wall thickenings of the papilla transfer cells contained callose and their presence prior to pollination was confirmed using EM-autoradiography, freeze-fracture and fixation. No further callose thickenings were produced following pollination. Pollination resulted in a rapid increase in aqueous stigma secretion and localized disruption of the cuticle, which appeared to remain on the surface of the secretion. Autolysis of the papilla cells, which had commenced prior to pollination, was accelerated and appeared to take place via cup-shaped vacuoles developed from distended endoplasmic reticulum. The reaction was localized to the papilla cells adjacent to the pollen tube only. Both pollen-grain wall and stigma secretion contained proteins, carbohydrates, acidic polysaccharides, lipids and phenolics.

Dislocations and stacking faults in stainless steel

1957 ◽  
Vol 240 (1223) ◽  
pp. 524-538 ◽  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Stainless Steel ◽  
Grain Boundaries ◽  
Stacking Faults ◽  
Stacking Fault ◽  
Stacking Fault Energy ◽  
Thin Sections ◽  
Partial Dislocations ◽  
Transmission Electron

Further experiments by transmission electron microscopy on thin sections of stainless steel deformed by small amounts have enabled extended dislocations to be observed directly. The arrangement and motion of whole and partial dislocations have been followed in detail. Many of the dislocations are found to have piled up against grain boundaries. Other observations include the formation of wide stacking faults, the interaction of dislocations with twin boundaries, and the formation of dislocations at thin edges of the foils. An estimate is made of the stacking-fault energy from a consideration of the stresses present, and the properties of the dislocations are found to be in agreement with those expected from a metal of low stacking-fault energy.

Sign in / Sign up

Export Citation Format

Share Document