Quantitative measurements of ammonia and methane loss from livestock.

2013 ◽  
pp. 238-253 ◽  
Author(s):  
S. M. McGinn
Keyword(s):  
Quantitative Measurements

Quantitative Measurements on the Ion Etching of TMV

1973 ◽  
Vol 31 ◽  
pp. 336-337
Author(s):  
Irwin Bendet ◽  
Nabil Rizk
Keyword(s):  
Electron Microscope ◽  
Tobacco Mosaic Virus ◽  
Mosaic Virus ◽  
Ion Current ◽  
Beam Diameter ◽  
Ion Etching ◽  
Preliminary Results ◽  
Quantitative Measurements ◽  
Monitoring Devices

Preliminary results reported last year on the ion etching of tobacco mosaic virus indicated that the diameter of the virus decreased more rapidly at 10KV than at 5KV, perhaps reaching a constant value before disappearing completely.In order to follow the effects of ion etching on TMV more quantitatively we have designed and built a second apparatus (Fig. 1), which incorporates monitoring devices for measuring ion current and vacuum as well as accelerating voltage. In addition, the beam diameter has been increased to approximately 1 cm., so that ten electron microscope grids can be exposed to the beam simultaneously.

Some quantitative applications of vascular corrosion casting

1992 ◽  
Vol 50 (1) ◽  
pp. 738-739
Author(s):  
Fred E. Hossler
Keyword(s):  
Blood Vessels ◽  
Nuclear Orientation ◽  
Three Dimensional ◽  
Surrounding Tissue ◽  
Confocal Laser ◽  
Corrosion Casting ◽  
Venous Valve ◽  
Casting Technique ◽  
Low Viscosity ◽  
Quantitative Measurements

Preparation of replicas of the complex arrangement of blood vessels in various organs and tissues has been accomplished by infusing low viscosity resins into the vasculature. Subsequent removal of the surrounding tissue by maceration leaves a model of the intricate three-dimensional anatomy of the blood vessels of the tissue not obtainable by any other procedure. When applied with care, the vascular corrosion casting technique can reveal fine details of the microvasculature including endothelial nuclear orientation and distribution (Fig. 1), locations of arteriolar sphincters (Fig. 2), venous valve anatomy (Fig. 3), and vessel size, density, and branching patterns. Because casts faithfully replicate tissue vasculature, they can be used for quantitative measurements of that vasculature. The purpose of this report is to summarize and highlight some quantitative applications of vascular corrosion casting. In each example, casts were prepared by infusing Mercox, a methyl-methacrylate resin, and macerating the tissue with 20% KOH. Casts were either mounted for conventional scanning electron microscopy, or sliced for viewing with a confocal laser microscope.

Imaging of ferroelectric domain walls by electron holography

1992 ◽  
Vol 50 (1) ◽  
pp. 246-247
Author(s):  
Xiao Zhang
Keyword(s):  
Magnetic Field ◽  
High Resolution ◽  
Domain Walls ◽  
Ferroelectric Domain ◽  
Object Wave ◽  
Electron Holography ◽  
High Resolution Imaging ◽  
Quantitative Measurements ◽  
Resolution Imaging ◽  
Electron Microscopes

Electron holography has recently been available to modern electron microscopy labs with the development of field emission electron microscopes. The unique advantage of recording both amplitude and phase of the object wave makes electron holography a effective tool to study electron optical phase objects. The visibility of the phase shifts of the object wave makes it possible to directly image the distributions of an electric or a magnetic field at high resolution. This work presents preliminary results of first high resolution imaging of ferroelectric domain walls by electron holography in BaTiO3 and quantitative measurements of electrostatic field distribution across domain walls.

Label-free, mass-sensitive single-molecule imaging using interferometric scattering microscopy

2020 ◽  
Author(s):  
Nikolas Hundt
Keyword(s):  
Single Molecule ◽  
Cellular Systems ◽  
Single Molecule Imaging ◽  
Label Free ◽  
Measurement Sensitivity ◽  
Mass Distributions ◽  
Quantitative Measurements ◽  
Contrast Mechanism ◽  
Cellular Components ◽  
Scattering Signal

Abstract Single-molecule imaging has mostly been restricted to the use of fluorescence labelling as a contrast mechanism due to its superior ability to visualise molecules of interest on top of an overwhelming background of other molecules. Recently, interferometric scattering (iSCAT) microscopy has demonstrated the detection and imaging of single biomolecules based on light scattering without the need for fluorescent labels. Significant improvements in measurement sensitivity combined with a dependence of scattering signal on object size have led to the development of mass photometry, a technique that measures the mass of individual molecules and thereby determines mass distributions of biomolecule samples in solution. The experimental simplicity of mass photometry makes it a powerful tool to analyse biomolecular equilibria quantitatively with low sample consumption within minutes. When used for label-free imaging of reconstituted or cellular systems, the strict size-dependence of the iSCAT signal enables quantitative measurements of processes at size scales reaching from single-molecule observations during complex assembly up to mesoscopic dynamics of cellular components and extracellular protrusions. In this review, I would like to introduce the principles of this emerging imaging technology and discuss examples that show how mass-sensitive iSCAT can be used as a strong complement to other routine techniques in biochemistry.

133Xe-DSPECT: Normalwerte von zerebraler Ruhedurchblutung und Reservekapazität

1987 ◽  
Vol 26 (05) ◽  
pp. 192-197 ◽  
Author(s):  
T. Kreisig ◽  
P. Schmiedek ◽  
G. Leinsinger ◽  
K. Einhäupl ◽  
E. Moser
Keyword(s):  
Blood Flow ◽  
Cerebral Blood Flow ◽  
Cerebrovascular Disease ◽  
Correlation Coefficient ◽  
Regional Cerebral Blood Flow ◽  
Regression Line ◽  
Reserve Capacity ◽  
Regional Cerebral Blood ◽  
Quantitative Measurements ◽  
Before And After

Using the 133Xe-DSPECT technique, quantitative measurements of regional cerebral blood flow (rCBF) were performed before and after provocation with acetazolamide (Diamox) i. v. in 32 patients without evidence of brain disease (normals). In 6 cases, additional studies were carried out to establish the time of maximal rCBF increase which was found to be approximately 15 min p. i. 1 g of Diamox increases the rCBF from 58 ±8 at rest to 73±5 ml/100 g/min. A Diamox dose of 2 g (9 cases) causes no further rCBF increase. After plotting the rCBF before provocation (rCBFR) and the Diamox-induced rCBF increase (reserve capacity, Δ rCBF) the regression line was Δ rCBF = −0,6 x rCBFR +50 (correlation coefficient: r = −0,77). In normals with relatively low rCBF values at rest, Diamox increases the reserve capacity much more than in normals with high rCBF values before provocation. It can be expected that this concept of measuring rCBF at rest and the reserve capacity will increase the sensitivity of distinguishing patients with reversible cerebrovascular disease (even bilateral) from normals.

GESTOGENS IN CORPUS LUTEUM OF CATTLE

1960 ◽  
Vol XXXIII (III) ◽  
pp. 417-427 ◽  
Author(s):  
John Kristoffersen
Keyword(s):  
Corpus Luteum ◽  
Average Value ◽  
Spectrophotometric Methods ◽  
The Third ◽  
Quantitative Measurements ◽  
Before And After ◽  
Luteal Tissue ◽  
In Pregnancy

ABSTRACT By means of chromatographic and spectrophotometric methods progesterone and a substance closely similar to 20β-hydroxy-pregn-4-ene-3-one has been detected in luteal tissue from non-pregnant and pregnant cows. In 21 animals quantitative measurements based on a method giving an average net recovery of 56 per cent showed that in pregnancy the average progesterone content in the corpus luteum reached a maximum in the third to fifth month, with low values before and after this period. For 6 nonpregnant cows, the average value was 20.2 μg/g tissue, which is considerably higher than previous values reported in the literature. The relation between these findings and the bovine dependence on a functional corpus luteum in pregnancy is discussed, and it is pointed out that more information about the metabolism of progesterone in cattle is highly desirable.

Modification of Low ĸ Materials for ULSI Multilevel Interconnects by Ion Implantation

2002 ◽  
Vol 716 ◽  
Author(s):  
Alok Nandini ◽  
U. Roy ◽  
A. Mallikarjunan ◽  
A. Kumar ◽  
J. Fortin ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Ion Implantation ◽  
Dielectric Materials ◽  
Dramatic Improvement ◽  
Force Microscopy ◽  
Low Dielectric ◽  
Quantitative Measurements ◽  
Hardness Increase ◽  
Xerogel Films ◽  
Ion Species

AbstractThin films of low dielectric constant (κ) materials such as Xerogel (ĸ=1.76) and SilkTM (ĸ=2.65) were implanted with argon, neon, nitrogen, carbon and helium with 2 x 1015 cm -2 and 1 x 1016 cm -2 dose at energies varying from 50 to 150 keV at room temperature. In this work we discuss the improvement of hardness as well as elasticity of low ĸ dielectric materials by ion implantation. Ultrasonic Force Microscopy (UFM) [6] and Nano indentation technique [5] have been used for qualitative and quantitative measurements respectively. The hardness increased with increasing ion energy and dose of implantation. For a given energy and dose, the hardness improvement varied with ion species. Dramatic improvement of hardness is seen for multi-dose implantation. Among all the implanted ion species (Helium, Carbon, Nitrogen, Neon and Argon), Argon implantation resulted in 5x hardness increase in Xerogel films, sacrificing only a slight increase (∼ 15%) in dielectric constant.

Nanorobots Sense Local Physiochemical Heterogeneities of Tumor Matrisome

2020 ◽  
Author(s):  
Debayan Dasgupta ◽  
Dharma Pally ◽  
Deepak K. Saini ◽  
Ramray Bhat ◽  
Ambarish Ghosh
Keyword(s):  
Cell Lines ◽  
Cancer Cell ◽  
Cancer Cell Lines ◽  
Adhesive Force ◽  
Surrounding Tissue ◽  
Quantitative Measurements ◽  
Malignant Breast Tumor ◽  
Malignant Breast ◽  
Cancer Dissemination

The dissemination of cancer is brought about by continuous interaction of malignant cells with their surrounding tissue microenvironment. Understanding and quantifying the remodeling of local extracellular matrix (ECM) by invading cells can therefore provide fundamental insights into the dynamics of cancer dissemination. In this paper, we use an active and untethered nanomechanical tool, realized as magnetically driven nanorobots, to locally probe a 3D tissue culture microenvironment consisting of cancerous and non-cancerous epithelia, embedded within reconstituted basement membrane (rBM) matrix. Our assay is designed to mimic the in vivo histopathological milieu of a malignant breast tumor. We find that nanorobots preferentially adhere to the ECM near cancer cells: this is due to the distinct charge conditions of the cancer-remodeled ECM. Surprisingly, quantitative measurements estimate that the adhesive force increases with the metastatic ability of cancer cell lines, while the spatial extent of the remodeled ECM was measured to be approximately 40 μm for all cancer cell lines studied here. We hypothesized and experimentally confirmed that specific sialic acid linkages specific to cancer-secreted ECM may be a major contributing factor in determining this adhesive behavior. The findings reported here can lead to promising applications in cancer diagnosis, quantification of cancer aggression, in vivo drug delivery applications, and establishes the tremendous potential of magnetic nanorobots for fundamental studies of cancer biomechanics.

EXPERIMENTAL STUDY OF REACTION OF ETHANOL WITH OXYGEN BEHIND SHOCK WAVES USING ATOMIC RESONANCE ABSORPTION SPECTROSCOPY METHOD

2020 ◽  
Author(s):  
N. S. Bystrov ◽  
◽  
A. V. Emelianov ◽  
A. V. Eremin ◽  
P. I. Yatsenko ◽  
...  
Keyword(s):  
Experimental Study ◽  
Shock Waves ◽  
Absorption Spectroscopy ◽  
Vacuum Ultraviolet ◽  
Resonance Absorption ◽  
Atomic Resonance ◽  
Quantitative Measurements ◽  
Series Of Experiments ◽  
Kinetics Of Reaction ◽  
Oxygen Atoms

The kinetics of reaction of C2H5OH with N2O behind shock waves is studied. The quantitative measurements of the time profiles of concentration of O atoms were carried out by the method of atomic resonance absorption spectroscopy (ARAS) using resonance vacuum-ultraviolet line of O-atom at 130.5 nm. For the calibration of absorption intensity of oxygen atoms depending on its concentration, the special series of experiments in the mixture containing different amounts of N2O in Ar was carried out at T = 2100 ± 50 K when molecule of N2O is completely dissociated. An experimental study of the appearance and consumption of oxygen atoms during the reaction of ethanol with oxygen in mixture 10 ppm N2O + (10 ... 0.1) ppm C2H5OH + Ar at temperatures of 16002300 K and pressures of 200-300 kPa have been carried out. A kinetic analysis of obtained data was performed using the Chemkin package.

Sign in / Sign up

Export Citation Format

Share Document