Study of energy consumption and greenhouse gas (GHG) emissions in corn production systems: influence of different tillage systems and use of fertilizer

2020 ◽  
Vol 51 (6) ◽  
pp. 769-778
Author(s):  
Amin Fathi ◽  
Davood Barari Tari ◽  
Hormoz Fallah Amoli ◽  
Yousef Niknejad
2017 ◽  
Vol 6 (2) ◽  
pp. 66 ◽  
Author(s):  
Maria Storrle ◽  
Hans-Jorg Brauckmann ◽  
Gabriele Broll

This study investigates the amounts of greenhouse gas (GHG) emissions due to manure handling within different livestock production systems in Tyumen oblast of Western Siberia. Tyumen oblast occupies approx. 160 000 km² of Asian taiga and forest steppe. The amount of GHGs from manure was calculated as a function of the handling according to current IPCC guidelines for ecozones and livestock production systems. The entire Tyumen oblast has annual 7 400 t methane emissions and 440 t nitrous oxide emissions from manure. Three livestock production systems are prevalent in Tyumen oblast: Mega farms, small farms and peasant farms. The share of mega farms is 81 % (171 kt CO2 eq). Additionally, the slurry system in mega farms causes environmental pollution. GHG emissions and environmental pollution could be reduced by implementing solid manure systems or pasturing, by installing storage facilities for slurry outside the stables and through application of the manure as fertiliser at mega farms. In small farms solid manure systems and a small stocking density of livestock lead to smallest GHG emissions (1 %, 3 kt CO2 eq) from manure. In peasant farming 18 % (38 kt CO2 eq) of GHGs are emitted due to pasturing. 


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5664
Author(s):  
Wenjing Wei ◽  
Peter B. Samuelsson ◽  
Anders Tilliander ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson

The primary energy consumption and greenhouse gas emissions from nickel smelting products have been assessed through case studies using a process model based on mass and energy balance. The required primary energy for producing nickel metal, nickel oxide, ferronickel, and nickel pig iron is 174 GJ/t alloy (174 GJ/t contained Ni), 369 GJ/t alloy (485 GJ/t contained Ni), 110 GJ/t alloy (309 GJ/t contained Ni), and 60 GJ/t alloy (598 GJ/t contained Ni), respectively. Furthermore, the associated GHG emissions are 14 tCO2-eq/t alloy (14 tCO2-eq/t contained Ni), 30 t CO2-eq/t alloy (40 t CO2-eq/t contained Ni), 6 t CO2-eq/t alloy (18 t CO2-eq/t contained Ni), and 7 t CO2-eq/t alloy (69 t CO2-eq/t contained Ni). A possible carbon emission reduction can be observed by comparing ore type, ore grade, and electricity source, as well as allocation strategy. The suggested process model overcomes the limitation of a conventional life cycle assessment study which considers the process as a ‘black box’ and allows for an identification of further possibilities to implement sustainable nickel production.


2021 ◽  
Author(s):  
Elsbe von der Lancken ◽  
Victoria Nasser ◽  
Katharina Hey ◽  
Stefan Siebert ◽  
Ana Meijide

<p>The need to sustain global food demand while mitigating greenhouse gases (GHG) emissions is a challenge for agricultural production systems. Since the reduction of GHGs has never been a breeding target, it is still unclear to which extend different crop varieties will affect GHG emissions. The objective of this study was to evaluate the impact of N-fertilization and of the use of growth regulators applied to three historical and three modern varieties of winter wheat on the emissions of the three most important anthropogenic GHGs, i.e. carbon dioxide (CO<sub>2</sub>), methane (CH<sub>4</sub>) and nitrous oxide (N<sub>2</sub>O). Furthermore, we aimed at identifying which combination of cultivars and management practises could mitigate GHG emissions in agricultural systems without compromising the yield. GHG measurements were performed using the closed chamber method in a field experiment located in Göttingen (Germany) evaluating three historical and three modern winter wheat varieties, with or without growth regulators under two fertilization levels (120 and 240 kg nitrogen ha<sup>-1</sup>). GHG measurements were carried out for 2 weeks following the third nitrogen fertilizer application (where one third of the total nitrogen was applied), together with studies on the evolution of mineral nitrogen and dissolved organic carbon in the soil. Modern varieties showed significantly higher CO<sub>2</sub> emissions (i.e. soil and plant respiration; +23 %) than historical varieties. The soils were found to be a sink for CH<sub>4,</sub> but CH<sub>4</sub> fluxes were not affected by the different treatments. N<sub>2</sub>O emissions were not significantly influenced by the variety age or by the growth regulators, and emissions increased with increasing fertilization level. The global warming potential (GWP) for the modern varieties was 7284.0 ± 266.9 kg CO<sub>2-eq</sub> ha<sup>-1</sup>. Even though the GWP was lower for the historic varieties (5939.5 ± 238.2 kg CO<sub>2</sub>-<sub>eq</sub> ha<sup>-1</sup>), their greenhouse gas intensity (GHGI), which relates GHG and crop yield, was larger (1.5 ± 0.3 g CO<sub>2</sub>-<sub>eq</sub> g<sup>-1</sup> grain), compared to the GHGI of modern varieties (0.9 ± 0.0 g CO<sub>2</sub>-<sub>eq</sub> g<sup>-1</sup> grain), due to the much lower grain yield in the historic varieties. Our results suggest that in order to mitigate GHG emissions without compromising the grain yield, the best management practise is to use modern high yielding varieties with growth regulators and a fertilization scheme according to the demand of the crop.</p>


Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 965 ◽  
Author(s):  
Jacek Brożyna ◽  
Wadim Strielkowski ◽  
Alena Fomina ◽  
Natalya Nikitina

Our paper focuses on the renewable energy and EU 2020 target for energy efficiency in the Czech Republic and Slovakia. We study the reduction of greenhouse gas (GHG) emissions in these two EU Member States through the prism of the Europe 2020 strategy and the 3 × 20 climate and energy package and economic growth (represented by the Gross Domestic Product (GDP) that allows to measure the national dynamics and provide cross-country comparisons) without attributing specific attention to issues such as the electrification of transport or heating, and thence leaving them outside the scope of this paper. Both Czech Republic and Slovakia are two post-Communist countries that still face the consequences of economic transformation and struggle with the optimal management of natural resources. Both countries encountered profound system transformation after 1989 that are apparent in all three measures of sustainable development used in our study. We show that it is unlikely that the planned increase in renewable energy in the Czech Republic and Slovakia will reach its targets, but they might succeed in reducing their energy consumption and greenhouse gas emissions. Our findings show that the energy intensity of Czech and Slovak economies increased in the early 2000s and then stabilized at a level about twice of the EU average. It appears that this value is likely to remain the same in the forthcoming years. However, implementation of GHG emissions in the Czech Republic and Slovakia may be at risk in case the proper energy policy is not maintained. Moreover, our results show how the increase in the share of renewable energy and improvement in energy efficiency go hand-in-hand with mining and exploiting the energy sources that is notorious for the transition economies. We also demonstrate that a proper energy policy is required for effectively reducing energy consumption and greenhouse gas emissions. There is a need for commitments made by relevant stakeholders and policymakers targeted at achieving sustainable economic growth and energy efficiency. In addition, we demonstrate that there is a need for maintaining a proper balance between economic development and environmental protection, which is a must for the EU sustainable energy development agenda and all its accompanying targets for all its Member States.


Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5514
Author(s):  
Seo-Hoon Kim ◽  
SungJin Lee ◽  
Seol-Yee Han ◽  
Jong-Hun Kim

A new government report on climate change shows that global emissions of greenhouse gases have increased to very high levels despite various policies to reduce climate change. Building energy accounts for 40% of the world’s energy consumption and accounts for 33% of the world’s greenhouse gas emissions. This study applied the LEAP (Long-range energy alternatives planning) model and Bass diffusion method for predicting the total energy consumption and GHG (Greenhouse Gas) emissions from the residential and commercial building sector of Sejong City in South Korea. Then, using the Bass diffusion model, three scenarios were analyzed (REST: Renewable energy supply target, BES: Building energy saving, BEP: Building energy policy) for GHG reduction. The GHG emissions for Sejong City for 2015–2030 were analyzed, and the past and future GHG emissions of the city were predicted in a Business-as-Usual (BAU) scenario. In the REST scenario, the GHG emissions would attain a 24.5% reduction and, in the BES scenario, the GHG emissions would attain 12.81% reduction by 2030. Finally, the BEP scenario shows the potential for a 19.81% GHG reduction. These results could be used to guide the planning and development of the new city.


2012 ◽  
Vol 616-618 ◽  
pp. 1148-1153
Author(s):  
Dong Sun ◽  
Chu Xia Tong

This paper attempts to discuss the embodied energy consumption and embodied greenhouse gas emissions in manufacturing industry. Based the on input-output theory, this paper establishes the calculation model, which gives the calculation of embodied energy consumption and embodied greenhouse gas emissions of 2002 and 2007 respectively. By comparison, it draws the conclusion that the total direct energy consumption of 2007 is much more than the year of 2002, while the total embodied energy consumption is less than the year of 2002. However, Non-metallic mineral products, Metal smelting and pressing and Electric equipment and machinery perform otherwise. The reason accounting for the calculation results is that the embodied energy intensity is greatly decreased.


2018 ◽  
Vol 58 (6) ◽  
pp. 980 ◽  
Author(s):  
Richard Rawnsley ◽  
Robyn A. Dynes ◽  
Karen M. Christie ◽  
Matthew Tom Harrison ◽  
Natalie A. Doran-Browne ◽  
...  

Recognition is increasingly given to the need of improving agricultural production and efficiency to meet growing global food demand, while minimising environmental impacts. Livestock forms an important component of global food production and is a significant contributor to anthropogenic greenhouse-gas (GHG) emissions. As such, livestock production systems (LPS) are coming under increasing pressure to lower their emissions. In developed countries, LPS have been gradually reducing their emissions per unit of product (emissions intensity; EI) over time through improvements in production efficiency. However, the global challenge of reducing net emissions (NE) from livestock requires that the rate of decline in EI surpasses the productivity increases required to satisfy global food demand. Mechanistic and dynamic whole farm-system models can be used to estimate farm-gate GHG emissions and to quantify the likely changes in farm NE, EI, farm productivity and farm profitability as a result of applying various mitigation strategies. Such models are also used to understand the complex interactions at the farm-system level and to account for how component mitigation strategies perform within the complexity of these interactions, which is often overlooked when GHG mitigation research is performed only at the component level. The results of such analyses can be used in extension activities and to encourage adoption, increase awareness and in assisting policy makers. The present paper reviews how whole farm-system modelling has been used to assess GHG mitigation strategies, and the importance of understanding metrics and allocation approaches when assessing GHG emissions from LPS.


2020 ◽  
Vol 52 (1) ◽  
pp. 1
Author(s):  
Prabang Setyono ◽  
Widhi Himawan ◽  
Cynthia Permata Sari ◽  
Totok Gunawan ◽  
Sigit Heru Murti

Considered as a trigger of climate change, greenhouse gas (GHG) is a global environmental issue. The City of Surakarta in Indonesia consists mainly of urban areas with high intensities of anthropogenic fossil energy consumption and, potentially, GHG emission. It is topographically a basin area and most likely prompts a Thermal Inversion, creating a risk of accumulation and entrapment of air pollutants or GHGs at low altitudes. Vegetation has been reported to mitigate the rate of increase in emissions because it acts as a natural carbon sink. This study aimed to mitigate the GHG emissions from energy consumption in Surakarta and formulate recommendations for control. It commenced with calculating the emission factors based on the IPCC formula and determining the key categories using the Level Assessment approach. It also involved computing the vegetation density according to the NDVI values of the interpretation of Sentinel 2A imagery. The estimation results showed that in 2018, the emission loads from the energy consumption in Surakarta reached 1,217,385.05 (tons of CO2e). The key categories of these emissions were electricity consumption, transportation on highways, and the domestic sector, with transportation on highways being the top priority. These loads have exceeded the local carrying capacity because they create an imbalance between emission and natural GHG sequestration by vegetations.


2020 ◽  
Vol 2 ◽  
Author(s):  
Astley Hastings ◽  
Pete Smith

The challenge facing society in the 21st century is to improve the quality of life for all citizens in an egalitarian way, providing sufficient food, shelter, energy, and other resources for a healthy meaningful life, while at the same time decarbonizing anthropogenic activity to provide a safe global climate, limiting temperature rise to well-below 2°C with the aim of limiting the temperature increase to no more than 1.5°C. To do this, the world must achieve net zero greenhouse gas (GHG) emissions by 2050. Currently spreading wealth and health across the globe is dependent on growing the GDP of all countries, driven by the use of energy, which until recently has mostly been derived from fossil fuel. Recently, some countries have decoupled their GDP growth and greenhouse gas emissions through a rapid increase in low carbon energy generation. Considering the current level of energy consumption and projected implementation rates of low carbon energy production, a considerable quantity of fossil fuels is projected to be used to fill the gap, and to avoid emissions of GHG and close the gap between the 1.5°C carbon budget and projected emissions, carbon capture and storage (CCS) on an industrial scale will be required. In addition, the IPCC estimate that large-scale GHG removal from the atmosphere is required to limit warming to below 2°C using technologies such as Bioenergy CCS and direct carbon capture with CCS to achieve climate safety. In this paper, we estimate the amount of carbon dioxide that will have to be captured and stored, the storage volume, technology, and infrastructure required to achieve the energy consumption projections with net zero GHG emissions by 2050. We conclude that the oil and gas production industry alone has the geological and engineering expertise and global reach to find the geological storage structures and build the facilities, pipelines, and wells required. Here, we consider why and how oil and gas companies will need to morph from hydrocarbon production enterprises into net zero emission energy and carbon dioxide storage enterprises, decommission facilities only after CCS, and thus be economically sustainable businesses in the long term, by diversifying in and developing this new industry.


Sign in / Sign up

Export Citation Format

Share Document