Geochronology of the Duguer range metamorphic rocks, Central Tibet: implications for the changing tectonic setting of the South Qiangtang subterrane

2016 ◽  
Vol 59 (1) ◽  
pp. 29-44 ◽  
Author(s):  
Yiming Liu ◽  
Cai Li ◽  
Chaoming Xie ◽  
Ming Wang ◽  
Jianjun Fan
Keyword(s):  
Tectonic Setting ◽  
Metamorphic Rocks ◽  
The South ◽  
Central Tibet

Petrogenesis and tectonic significance of the middle Neoproterozoic highly fractionated A-type granite in the South Qinling block

2021 ◽  
pp. 1-20
Author(s):  
Xiao-Fei Qiu ◽  
Qiong Xu ◽  
Tuo Jiang ◽  
Shan-Song Lu ◽  
Long Zhao
Keyword(s):  
Tectonic Setting ◽  
Eastern China ◽  
Continental Rift ◽  
The South ◽  
Yangtze Craton ◽  
Dabie Orogen ◽  
Northern Margin ◽  
South Qinling ◽  
Type Granite ◽  
High Alkali

Abstract The South Qinling block, a segment of the Yangtze craton involved in the Qinling–Dabie orogen, is critical for understanding the tectonic evolution of eastern China. However, the tectonic setting of the South Qinling block and the northern margin of the Yangtze block during middle Neoproterozoic time has long been the subject of debate, with two distinctly different models (continental rift or volcanic arc) proposed. Here, a comprehensive study of zircon U–Pb geochronology and geochemistry has been carried out on the Chengwan granitic pluton from the Suizao terrane in the South Qinling block. The granites are monzogranite and syenogranite in lithology, and are mainly composed of potash feldspar, quartz, plagioclase and biotite. This suite has long been regarded as a Palaeozoic magmatic pluton, but zircon U–Pb ages of 809 ± 9 Ma and 816 ± 4 Ma are obtained in this study. The granites are metaluminous to strongly peraluminous with high alkali contents, and exhibit highly fractionated features, including high SiO2, low Zr/Hf ratios, rare earth element tetrad effects and enrichment of K and Rb. They show Hf–Nd isotopic decoupling, which may be genetically related to their petrogenetic process. Based on the geochemical features and the positive εHf(t) values of the zircons, it is indicated that the granites may have been derived from partial melting of juvenile tonalitic rocks by biotite breakdown under fluid-absent conditions. The Chengwan granite geochemically belongs to the A2-subtype granites, suggesting that it might have formed in a post-orogenic tectonic setting. The highly fractionated A-type granite in this study may represent extensional collapse shortly after the collisional events in the South Qinling block, and thus indicate a tectonic regime switch, from compression to extension, as early as middle Neoproterozoic time. Integrating our new data with documented magmatic, metamorphic and sedimentary events during middle Neoproterozoic time in the region may support a continental rift model, and argues against arc models.

Mesozoic Tectonic Setting of SE Sundaland After Magmatism and Suture Evidences in JS-1 Ridge Area

2021 ◽  
Keyword(s):  
Early Cretaceous ◽  
Late Cretaceous ◽  
Tectonic Setting ◽  
Plate Boundary ◽  
Early Jurassic ◽  
The South ◽  
Magmatic Arc ◽  
Plate Convergence ◽  
Ridge Area ◽  
Cretaceous Subduction

Mesozoic plate convergence in SE Sundaland has been a source of debate for decades. A determination of plate convergence boundaries and timing have been explained in many publications, but not all boundaries were associated with magmatism. Through integration of both plate configurations and magmatic deposits, the basement can be accurately characterized over time and areal extents. This paper will discuss Cretaceous subductions and magmatic arc trends in SE Sundaland area with additional evidence found in JS-1 Ridge. At least three subduction trends are captured during the Mesozoic in the study area: 1) Early Jurassic – Early Cretaceous trend of Meratus, 2) Early Cretaceous trend of Bantimala and 3) Late Cretaceous trend in the southernmost study area. The Early Jurassic – Early Cretaceous subduction occurred along the South and East boundary of Sundaland (SW Borneo terrane) and passes through the Meratus area. The Early Cretaceous subduction occurred along South and East boundary of Sundaland (SW Borneo and Paternoster terranes) and pass through the Bantimala area. The Late Cretaceous subduction occurred along South and East boundary of Sundaland (SW Borneo, Paternoster and SE Java – South Sulawesi terranes), but is slightly shifted to the South approaching the Oligocene – Recent subduction zone. Magmatic arc trends can also be generally grouped into three periods, with each period corresponds to the subduction processes at the time. The first magmatic arc (Early Jurassic – Early Cretaceous) is present in core of SW Borneo terrane and partly produces the Schwaner Magmatism. The second Cretaceous magmatic arc (Early Cretaceous) trend is present in the SW Borneo terrane but is slightly shifted southeastward It is responsible for magmatism in North Java offshore, northern JS-1 Ridge and Meratus areas. The third magmatic arc trend is formed by Late Cretaceous volcanic rocks in Luk Ulo, the southern JS-1 Ridge and the eastern Makassar Strait areas. These all occur during the same time within the Cretaceous magmatic arc. Though a mélange rock sample has not been found in JS-1 Ridge area, there is evidence of an accretionary prism in the area as evidenced by the geometry observed on a new 3D seismic dataset. Based on the structural trend of Meratus (NNE-SSW) coupled with the regional plate boundary understanding, this suggests that both Meratus & JS-1 Ridge are part of the same suture zone between SW Borneo and Paternoster terranes. The gradual age transition observed in the JS-1 Ridge area suggests a southward shift of the magmatic arc during Early Cretaceous to Late Cretaceous times.

scholarly journals Heavy minerals in the Wajid Sandstone from Abha-Khamis Mushayt area, southwestern Saudi Arabia: implications on provenance and regional tectonic setting

GeoArabia ◽  
2004 ◽  
Vol 9 (4) ◽  
pp. 77-102 ◽  
Author(s):  
Mahbub Hussain ◽  
Lameed O. Babalola ◽  
Mustafa M. Hariri
Keyword(s):  
Saudi Arabia ◽  
Tectonic Setting ◽  
Principal Component ◽  
Heavy Mineral ◽  
Heavy Minerals ◽  
Coarse Grained ◽  
Distribution Data ◽  
The South ◽  
Quartz Content ◽  
The North

ABSTRACT The Wajid Sandstone (Ordovician-Permian) as exposed along the road-cut sections of the Abha and Khamis Mushayt areas in southwestern Saudi Arabia, is a mediun to coarse-grained, mineralogically mature quartz arenite with an average quartz content of over 95%. Monocrystalline quartz is the dominant framework grain followed by polycrystalline quartz, feldspar and micas. The non-opaque heavy mineral assemblage of the sandstone is dominated by zircon, tourmaline and rutile (ZTR). Additional heavy minerals, constituting a very minor fraction of the heavies, include epidote, hornblende, and kyanite. Statistical analysis showed significant correlations between zircon, tourmaline, rutile, epidote and hornblende. Principal component R-mode varimax factor analysis of the heavy mineral distribution data shows two strong associations: (1) tourmaline, zircon, rutile, and (2) epidote and hornblende suggesting several likely provenances including igneous, recycled sedimentary and metamorphic rocks. However, an abundance of the ZTR minerals favors a recycled sedimentary source over other possibilities. Mineralogical maturity coupled with characteristic heavy mineral associations, consistent north-directed paleoflow evidence, and the tectonic evolutionary history of the region indicate a provenance south of the study area. The most likely provenances of the lower part (Dibsiyah and Khusayyan members) of the Wajid Sandstone are the Neoproterozoic Afif, Abas, Al-Bayda, Al-Mahfid, and Al-Mukalla terranes, and older recycled sediments of the infra-Cambrian Ghabar Group in Yemen to the south. Because Neoproterozic (650-542 Ma) rocks are not widespread in Somalia, Eritrea and Ethiopia, a significant source further to the south is not likely. The dominance of the ultrastable minerals zircon, tourmaline and rutile and apparent absence of metastable, labile minerals in the heavy mineral suite preclude the exposed arc-derived oceanic terrains of the Arabian Shield in the west and north as a significant contributor of the sandstone. An abundance of finer-grained siliciclastic sequences of the same age in the north, is consistent with a northerly transport direction and the existence of a deeper basin (Tabuk Basin?) to the north. The tectonic and depositional model presented in this paper differs from the existing model that envisages sediment transportation and gradual basin filling from west to east during the Paleozoic.

scholarly journals Volcanic activity and gas emissions along the South Sandwich Arc

2020 ◽  
Vol 83 (1) ◽  
Author(s):  
Emma J. Liu ◽  
Kieran Wood ◽  
Alessandro Aiuppa ◽  
Gaetano Giudice ◽  
Marcello Bitetto ◽  
...  
Keyword(s):  
Carbon Isotope ◽  
Volcanic Activity ◽  
Emission Rate ◽  
Tectonic Setting ◽  
Hydrothermal Systems ◽  
Molar Ratio ◽  
The South ◽  
Gas Emissions ◽  
Volcanic Arc

AbstractThe South Sandwich Volcanic Arc is one of the most remote and enigmatic arcs on Earth. Sporadic observations from rare cloud-free satellite images—and even rarer in situ reports—provide glimpses into a dynamic arc system characterised by persistent gas emissions and frequent eruptive activity. Our understanding of the state of volcanic activity along this arc is incomplete compared to arcs globally. To fill this gap, we present here detailed geological and volcanological observations made during an expedition to the South Sandwich Islands in January 2020. We report the first in situ measurements of gas chemistry, emission rate and carbon isotope composition from along the arc. We show that Mt. Michael on Saunders Island is a persistent source of gas emissions, releasing 145 ± 59 t day−1 SO2 in a plume characterised by a CO2/SO2 molar ratio of 1.8 ± 0.2. Combining this CO2/SO2 ratio with our independent SO2 emission rate measured near simultaneously, we derive a CO2 flux of 179 ± 76 t day−1. Outgassing from low temperature (90–100 °C) fumaroles is pervasive at the active centres of Candlemas and Bellingshausen, with measured gas compositions indicative of interaction between magmatic fluids and hydrothermal systems. Carbon isotope measurements of dilute plume and fumarole gases from along the arc indicate a magmatic δ13C of − 4.5 ± 2.0‰. Interpreted most simply, this result suggests a carbon source dominated by mantle-derived carbon. However, based on a carbon mass balance from sediment core ODP 701, we show that mixing between depleted upper mantle and a subduction component composed of sediment and altered crust is also permissible. We conclude that, although remote, the South Sandwich Volcanic Arc is an ideal tectonic setting in which to explore geochemical processes in a young, developing arc.

The uplift of high-pressure-low-temperature metamorphic rocks

1987 ◽  
Vol 321 (1557) ◽  
pp. 87-103 ◽  
Keyword(s):  
Tectonic Setting ◽  
Geothermal Gradient ◽  
Dominant Mode ◽  
Metamorphic Rocks ◽  
Return Flow ◽  
Accretionary Wedge ◽  
Moderate Amount ◽  
Low Viscosity ◽  
Buoyancy Forces ◽  
Flowing Material

The uplift of high- P -low- T metamorphic rocks has been attributed to buoyancy, diapirism, or hydrodynamically driven return flow. Buoyancy forces can return material subducted into the mantle only if subduction slows or ceases, reducing the downward traction. The buoyancy forces will be reversed within the crust, because of the increased density of high- P assemblages, and therefore can not cause the subducted material to rise beyond the base of the crust. Diapirism and hydrodynamic flow processes require a low-density, low-viscosity matrix, and can only explain the emplacement of relatively small bodies of high- P rock entrained in the flowing material. The tectonic setting of coherent regional high- P —low- T terrains can be explained in terms of the mechanical behaviour of an accretionary wedge with negligible yield strength, where underplating is the dominant mode of accretion. Underplating thickens the wedge from beneath and increases its surface slope. This causes the upper part of the wedge to extend horizontally, even though convergence is continuing. Continued underplating beneath and extension above can allow the oldest high- P rocks to rise to within reach of a moderate amount of erosion on a time scale of the order of 10 Ma. As long as subduction continues beneath the wedge, the geothermal gradient will not relax to a normal value. This process explains (a) the evidence that high- P -low- T rocks are commonly uplifted while convergence is continuing; (b) the absence in many cases of significant overprinting by higher- T assemblages; (c) the position of the oldest and highest pressure rocks in the upper rear of orogenic wedges; (d) the lack of adequate tectonic thicknesses of overlying rock to explain the metamorphism; and (e) the common occurrence of post-metamorphic faults that excise parts of the metamorphic zonation.

Sign in / Sign up

Export Citation Format

Share Document