Development of technology for welding small diameter pipelines from 08H18N10T steel for atomic energy equipment by using the “AUTO-PRESSING” method

2019 ◽  
Vol 33 (4-6) ◽  
pp. 156-160
Author(s):  
D. A. Praliev ◽  
D. V. Khodakov ◽  
V. D. Khodakov ◽  
D. A. Gutorov ◽  
I. V. Peremyslov
Keyword(s):  
Small Diameter ◽  
Atomic Energy ◽  
Pressing Method ◽  
Energy Equipment

scholarly journals Pilot study on low-density binderless bark particleboards manufacture from gelam wood (Melaleuca sp.) bark

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 7390-7403
Author(s):  
Eva Oktoberyani Christy ◽  
Soemarno ◽  
Sumardi Hadi Sumarlan ◽  
Agoes Soehardjono
Keyword(s):  
Physical Properties ◽  
Small Diameter ◽  
Average Diameter ◽  
Low Density ◽  
Thickness Swelling ◽  
Pressing Method ◽  
X Ray ◽  
Maximum Thickness ◽  
Internal Morphology ◽  
Small Diameter Trees

The production of low-density binderless bark particleboards (LDBBP) from gelam wood bark (GWB) using a hot pressing method at low temperature (128 °C) and pressure (30 kg × cm-2) was explored by examining their physical properties according to SNI 03-2105-2006 (2006). They were also examined via scanning electron microscope (SEM)-energy dispersive X-ray (EDX) observation. The LDBBPs were manufactured using two types of GWB particles: (1) bark waste that was peeled off of small-diameter trees < 10 cm (A) and, (2) bark that was directly peeled off from a standing tree with an average diameter of 10 cm to 15 cm (B). Results showed that the average values of the physical properties of LDBBP(A) and LDBBP(B) met the SNI 03-2105-2006 (2006) requirements in terms of density, moisture content, and thickness swelling after being immersed for 24 h for particleboard type 24-10 and type 17.5-10.5 with maximum thickness swelling requirement 20%. However, they failed to meet the maximum thickness swelling criterion of 12% for other particleboard types. Subsequent internal morphology observation using SEM indicated the presence of cracks on LDBBP (A), so only LDBBP (B) could be manufactured without delamination. Gelam bark could potentially be used to produce non-adhesive particleboards.

A Replica Technique for the Inside Surfaces of Small Diameter Pipes and Tubes

1967 ◽  
Vol 25 ◽  
pp. 352-353
Author(s):  
T. G. Gregory
Keyword(s):  
Polyvinyl Chloride ◽  
Small Diameter ◽  
Replica Technique ◽  
Tube Size ◽  
Inside Diameter ◽  
Complete Inspection ◽  
Operating Limits

A nondestructive replica technique permitting complete inspection of bore surfaces having an inside diameter from 0.050 inch to 0.500 inch is described. Replicas are thermally formed on the outside surface of plastic tubing inflated in the bore of the sample being studied. This technique provides a new medium for inspection of bores that are too small or otherwise beyond the operating limits of conventional inspection methods.Bore replicas may be prepared by sliding a length of plastic tubing completely through the bore to be studied as shown in Figure 1. Polyvinyl chloride tubing suitable for this replica process is commercially available in sizes from 0.037- to 0.500-inch diameter. A tube size slightly smaller than the bore to be replicated should be used to facilitate insertion of the plastic replica blank into the bore.

Structural Organization and Distribution of Fiber Types in Extraocular Muscles of Cats

1972 ◽  
Vol 30 ◽  
pp. 34-35
Author(s):  
Asish C. Nag ◽  
Lee D. Peachey
Keyword(s):  
Fiber Type ◽  
Light And Electron Microscopy ◽  
Small Diameter ◽  
Extraocular Muscles ◽  
Fiber Types ◽  
Distinctive Features ◽  
Superior Rectus ◽  
Adult Cats ◽  
Different Diameters ◽  
Orbital Region

Cat extraocular muscles consist of two regions: orbital, and global. The orbital region contains predominantly small diameter fibers, while the global region contains a variety of fibers of different diameters. The differences in ultrastructural features among these muscle fibers indicate that the extraocular muscles of cats contain at least five structurally distinguishable types of fibers.Superior rectus muscles were studied by light and electron microscopy, mapping the distribution of each fiber type with its distinctive features. A mixture of 4% paraformaldehyde and 4% glutaraldehyde was perfused through the carotid arteries of anesthetized adult cats and applied locally to exposed superior rectus muscles during the perfusion.

Prospects for convergent beam electron diffraction with a 200kV cold field-emission transmission electron microscope

1991 ◽  
Vol 49 ◽  
pp. 466-467
Author(s):  
J W Steeds ◽  
R Vincent
Keyword(s):  
Field Emission ◽  
High Performance ◽  
Small Diameter ◽  
Convergent Beam Electron Diffraction ◽  
Zone Axis ◽  
Medium Voltage ◽  
Transmission Electron ◽  
Good Crystallinity ◽  
Special Modification ◽  
Convergent Beam

We review the analytical powers which will become more widely available as medium voltage (200-300kV) TEMs with facilities for CBED on a nanometre scale come onto the market. Of course, high performance cold field emission STEMs have now been in operation for about twenty years, but it is only in relatively few laboratories that special modification has permitted the performance of CBED experiments. Most notable amongst these pioneering projects is the work in Arizona by Cowley and Spence and, more recently, that in Cambridge by Rodenburg and McMullan.There are a large number of potential advantages of a high intensity, small diameter, focussed probe. We discuss first the advantages for probes larger than the projected unit cell of the crystal under investigation. In this situation we are able to perform CBED on local regions of good crystallinity. Zone axis patterns often contain information which is very sensitive to thickness changes as small as 5nm. In conventional CBED, with a lOnm source, it is very likely that the information will be degraded by thickness averaging within the illuminated area.

Applications of SIMS to electronic materials and devices

1992 ◽  
Vol 50 (2) ◽  
pp. 1682-1683
Author(s):  
S.F. Corcoran
Keyword(s):  
Depth Distribution ◽  
Secondary Ion Mass Spectrometry ◽  
Semiconductor Device ◽  
Electronic Materials ◽  
Profile Analysis ◽  
Semiconductor Industry ◽  
Small Diameter ◽  
Depth Resolution ◽  
Detection Sensitivity

Over the past decade secondary ion mass spectrometry (SIMS) has played an increasingly important role in the characterization of electronic materials and devices. The ability of SIMS to provide part per million detection sensitivity for most elements while maintaining excellent depth resolution has made this technique indispensable in the semiconductor industry. Today SIMS is used extensively in the characterization of dopant profiles, thin film analysis, and trace analysis in bulk materials. The SIMS technique also lends itself to 2-D and 3-D imaging via either the use of stigmatic ion optics or small diameter primary beams.By far the most common application of SIMS is the determination of the depth distribution of dopants (B, As, P) intentionally introduced into semiconductor materials via ion implantation or epitaxial growth. Such measurements are critical since the dopant concentration and depth distribution can seriously affect the performance of a semiconductor device. In a typical depth profile analysis, keV ion sputtering is used to remove successive layers the sample.

Improved immunolabelling of ultrathin cryosections using antibody conjugated with 1nm gold particles

1990 ◽  
Vol 48 (3) ◽  
pp. 928-929
Author(s):  
Morten H. Nielsen ◽  
Lone Bastholm
Keyword(s):  
Pituitary Gland ◽  
Liquid Nitrogen ◽  
Electron Density ◽  
Small Diameter ◽  
Cytochemical Staining ◽  
Gold Particles ◽  
Labelling Density ◽  
Ultrathin Cryosections ◽  
Mouse Pituitary ◽  
Electron Microscopical

During the last 5 years the diameter of the gold probes used for immuno-cytochemical staining at the electron microscopical (EM) level has been decreased. The advantage of small diameter gold probes is an overall increased labelling density. The disadvantage is a lower detectability due to the low electron density of smaller gold particles consequently an inconvenient high primary magnification needed for EM examination. Since 1 nm gold particles are barely visible by conventional EM examination the need for enlargement by silverenhancement of the gold particles has increased.In the present study of ultrathin cryosectioned material the results of immunostaining using 5 nm gold conjugated antibody and 1 nm gold conjugated antibodies are compared after silverenhancement of the 1 nm gold particles.Slices of freshly isolated mouse pituitary gland were immersion fixed for 20 min in 2 % glutaraldehyde /2 % paraformaldehyde. Blocks cryoprotected with 2.3 M sucrose were frozen in liquid nitrogen and ultra-cryosectioned on a RMC cryoultra-microtome.

Radiological safety and assessment of the performance of X-ray systems in veterinary facilities

2020 ◽  
Author(s):  
S. Economides ◽  
C.J. Hourdakis ◽  
C. Pafilis ◽  
G. Simantirakis ◽  
P. Tritakis ◽  
...  
Keyword(s):  
Decision Making ◽  
Radiation Protection ◽  
Atomic Energy Commission ◽  
Atomic Energy ◽  
Regulatory Control ◽  
Continuous Training ◽  
X Ray ◽  
The Public ◽  
Radiological Safety ◽  
High Level

This paper concerns an analysis regarding the performance of X-ray equipment as well as the radiological safety in veterinary facilities. Data were collected from 380 X-ray veterinary facilities countrywide during the on-site regulatory inspections carried out by the Greek Atomic Energy Commission. The analysis of the results shows that the majority of the veterinary radiographic systems perform within the acceptable limits; moreover, the design and shielding of X-ray rooms as well as the applied procedures ensure a high level of radiological safety for the practitioners, operators and the members of the public. An issue that requires specific attention in the optimization process for the proper implementation of veterinary radiology practices in terms of radiological safety is the continuous training of the personnel. The above findings and the regulatory experience gained were valuable decision-making elements regarding the type of the regulatory control of veterinary radiology practices in the new radiation protection framework.

Sign in / Sign up

Export Citation Format

Share Document