Penalized Estimation in Large-Scale Generalized Linear Array Models

Purpose Because of the small size and high integration of capacitive micromachined ultrasonic transducer (CMUT) component, it can be made into large-scale array, but this lead to high hardware complexity, so the purpose of this paper is to use less elements to achieve better imaging results. In this research, an optimized sparse array is studied, which can suppress the side lobe and reduce the imaging artifacts compared with the equispaced sparse array with the same number of elements. Design/methodology/approach Genetic algorithm is used to sparse the CMUT linear array, and Kaiser window apodization is added to reduce imaging artifacts, the beam pattern and peak-to-side lobe ratio are calculated, point targets imaging comparisons are performed. Furthermore, a 256-elements CMUT linear array is used to carry out the imaging experiment of embedded mass and forearm blood vessel, and the imaging results are compared quantitatively. Findings Through the imaging comparison of embedded mass and forearm blood vessel, the feasibility of optimized sparse array of CMUT is verified, and the purpose of reducing the hardware complexity is achieved. Originality/value This research provides a basis for the large-scale CMUT array to reduce the hardware complexity and the amount of calculation. At present, the CMUT array has been used in medical ultrasound imaging and has huge market potential.

Download Full-text

Imputation of incomplete large‐scale monitoring count data via penalized estimation

Methods in Ecology and Evolution ◽

10.1111/2041-210x.13594 ◽

2021 ◽

Author(s):

Mohamed Dakki ◽

Geneviève Robin ◽

Marie Suet ◽

Abdeljebbar Qninba ◽

Mohammed A. El Agbani ◽

...

Keyword(s):

Count Data ◽

Large Scale ◽

Penalized Estimation

Download Full-text

Some comments about observations and image processing of comet 29P/Schwassmann-Wachmann 1

International Astronomical Union Colloquium ◽

10.1017/s0252921100031493 ◽

1999 ◽

Vol 173 ◽

pp. 243-248

Author(s):

D. Kubáček ◽

A. Galád ◽

A. Pravda

Keyword(s):

Image Processing ◽

Large Scale ◽

Harvard College ◽

Oak Ridge ◽

Large Scale Structures ◽

Short Period Comet ◽

Short Period ◽

Scale Structures ◽

Harvard College Observatory ◽

Period Comet

AbstractUnusual short-period comet 29P/Schwassmann-Wachmann 1 inspired many observers to explain its unpredictable outbursts. In this paper large scale structures and features from the inner part of the coma in time periods around outbursts are studied. CCD images were taken at Whipple Observatory, Mt. Hopkins, in 1989 and at Astronomical Observatory, Modra, from 1995 to 1998. Photographic plates of the comet were taken at Harvard College Observatory, Oak Ridge, from 1974 to 1982. The latter were digitized at first to apply the same techniques of image processing for optimizing the visibility of features in the coma during outbursts. Outbursts and coma structures show various shapes.

Download Full-text

Evolution of Large-Scale Coronal Structures

International Astronomical Union Colloquium ◽

10.1017/s0252921100024945 ◽

1994 ◽

Vol 144 ◽

pp. 29-33

Author(s):

P. Ambrož

Keyword(s):

Magnetic Field ◽

Field Line ◽

Large Scale ◽

Coronal Magnetic Field ◽

Source Surface ◽

Solar Cycles ◽

Characteristic Relationship ◽

The Magnetic Field ◽

Coronal Structures

AbstractThe large-scale coronal structures observed during the sporadically visible solar eclipses were compared with the numerically extrapolated field-line structures of coronal magnetic field. A characteristic relationship between the observed structures of coronal plasma and the magnetic field line configurations was determined. The long-term evolution of large scale coronal structures inferred from photospheric magnetic observations in the course of 11- and 22-year solar cycles is described.Some known parameters, such as the source surface radius, or coronal rotation rate are discussed and actually interpreted. A relation between the large-scale photospheric magnetic field evolution and the coronal structure rearrangement is demonstrated.

Download Full-text

Large-scale Motion of Solar Filaments

International Astronomical Union Colloquium ◽

10.1017/s0252921100064502 ◽

2000 ◽

Vol 179 ◽

pp. 205-208

Author(s):

Pavel Ambrož ◽

Alfred Schroll

Keyword(s):

Magnetic Flux ◽

Proper Motion ◽

Time Scale ◽

Large Scale ◽

Accuracy Of Measurements ◽

Solar Filaments ◽

General Movement ◽

Scale Motion ◽

Velocity Scatter

AbstractPrecise measurements of heliographic position of solar filaments were used for determination of the proper motion of solar filaments on the time-scale of days. The filaments have a tendency to make a shaking or waving of the external structure and to make a general movement of whole filament body, coinciding with the transport of the magnetic flux in the photosphere. The velocity scatter of individual measured points is about one order higher than the accuracy of measurements.

Download Full-text

Some applications of electron beam microanalysis techniques in VLSI process evaluation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010007463x ◽

1983 ◽

Vol 41 ◽

pp. 160-161

Author(s):

Simon Thomas

Keyword(s):

Integrated Circuits ◽

Process Evaluation ◽

Large Scale ◽

Technology Development ◽

Analytical Techniques ◽

Successful Implementation ◽

Analysis Of Failures ◽

Characterization Of Materials ◽

Circuits Vlsi

Trends in the technology development of very large scale integrated circuits (VLSI) have been in the direction of higher density of components with smaller dimensions. The scaling down of device dimensions has been not only laterally but also in depth. Such efforts in miniaturization bring with them new developments in materials and processing. Successful implementation of these efforts is, to a large extent, dependent on the proper understanding of the material properties, process technologies and reliability issues, through adequate analytical studies. The analytical instrumentation technology has, fortunately, kept pace with the basic requirements of devices with lateral dimensions in the micron/ submicron range and depths of the order of nonometers. Often, newer analytical techniques have emerged or the more conventional techniques have been adapted to meet the more stringent requirements. As such, a variety of analytical techniques are available today to aid an analyst in the efforts of VLSI process evaluation. Generally such analytical efforts are divided into the characterization of materials, evaluation of processing steps and the analysis of failures.

Download Full-text

Electron microscopy study of reactively sputter-deposited Ti/N films on silicon

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100131449 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1362-1363

Author(s):

V. C. Kannan ◽

A. K. Singh ◽

R. B. Irwin ◽

S. Chittipeddi ◽

F. D. Nkansah ◽

...

Keyword(s):

Integrated Circuits ◽

Large Scale ◽

Hexagonal Phase ◽

Microscopy Study ◽

Electron Microscopy Study ◽

Process Conditions ◽

Tin Films ◽

Wide Range ◽

Fcc Phase ◽

Circuits Vlsi

Titanium nitride (TiN) films have historically been used as diffusion barrier between silicon and aluminum, as an adhesion layer for tungsten deposition and as an interconnect material etc. Recently, the role of TiN films as contact barriers in very large scale silicon integrated circuits (VLSI) has been extensively studied. TiN films have resistivities on the order of 20μ Ω-cm which is much lower than that of titanium (nearly 66μ Ω-cm). Deposited TiN films show resistivities which vary from 20 to 100μ Ω-cm depending upon the type of deposition and process conditions. TiNx is known to have a NaCl type crystal structure for a wide range of compositions. Change in color from metallic luster to gold reflects the stabilization of the TiNx (FCC) phase over the close packed Ti(N) hexagonal phase. It was found that TiN (1:1) ideal composition with the FCC (NaCl-type) structure gives the best electrical property.

Download Full-text

Evolution of the microstructure of Cu(Ti)/SiO2 layers annealed in NH3

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100138634 ◽

1995 ◽

Vol 53 ◽

pp. 452-453

Author(s):

J. Liu ◽

N. D. Theodore ◽

D. Adams ◽

S. Russell ◽

T. L. Alford ◽

...

Keyword(s):

Thermal Stability ◽

Titanium Nitride ◽

Large Scale ◽

Standard Procedure ◽

Alloy Film ◽

Electron Beam Evaporation ◽

Copper Metallization ◽

Nominal Composition ◽

Ti Alloy ◽

Thermally Grown

Copper-based metallization has recently attracted extensive research because of its potential application in ultra-large-scale integration (ULSI) of semiconductor devices. The feasibility of copper metallization is, however, limited due to its thermal stability issues. In order to utilize copper in metallization systems diffusion barriers such as titanium nitride and other refractory materials, have been employed to enhance the thermal stability of copper. Titanium nitride layers can be formed by annealing Cu(Ti) alloy film evaporated on thermally grown SiO2 substrates in an ammonia ambient. We report here the microstructural evolution of Cu(Ti)/SiO2 layers during annealing in NH3 flowing ambient.The Cu(Ti) films used in this experiment were prepared by electron beam evaporation onto thermally grown SiO2 substrates. The nominal composition of the Cu(Ti) alloy was Cu73Ti27. Thermal treatments were conducted in NH3 flowing ambient for 30 minutes at temperatures ranging from 450°C to 650°C. Cross-section TEM specimens were prepared by the standard procedure.

Download Full-text

Immunogold labeling of CMP-KDO synthetase produced by recombinant E. Coli cells

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100128900 ◽

1987 ◽

Vol 45 ◽

pp. 924-925

Author(s):

F. A. Durum ◽

R. G. Goldman ◽

T. J. Bolling ◽

M. F. Miller

Keyword(s):

Inclusion Bodies ◽

Large Scale ◽

Recombinant Dna ◽

Test System ◽

Cell Protein ◽

Gram Negative Bacteria ◽

Cytoplasmic Inclusions ◽

Isolation And Purification ◽

E Coli ◽

Low Concentrations

CMP-KDO synthetase (CKS) is an enzyme which plays a key role in the synthesis of LPS, an outer membrane component unique to gram negative bacteria. CKS activates KDO to CMP-KDO for incorporation into LPS. The enzyme is normally present in low concentrations (0.02% of total cell protein) which makes it difficult to perform large scale isolation and purification. Recently, the gene for CKS from E. coli was cloned and various recombinant DNA constructs overproducing CKS several thousandfold (unpublished data) were derived. Interestingly, no cytoplasmic inclusions of overproduced CKS were observed by EM (Fig. 1) which is in contrast to other reports of large proteinaceous inclusion bodies in various overproducing recombinant strains. The present immunocytochemical study was undertaken to localize CKS in these cells.Immune labeling conditions were first optimized using a previously described cell-free test system. Briefly, this involves soaking small blocks of polymerized bovine serum albumin in purified CKS antigen and subjecting them to various fixation, embedding and immunochemical conditions.

Download Full-text

The Structure and Properties of MoSi2 Thin Film in Mos Process

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s1431927600001379 ◽

1980 ◽

Vol 38 ◽

pp. 326-327

Author(s):

C.K. Wu ◽

P. Chang ◽

N. Godinho

Keyword(s):

Thin Film ◽

Integrated Circuits ◽

High Performance ◽

Large Scale ◽

Process Development ◽

Structure And Properties ◽

Metal Silicides ◽

High Oxidation ◽

Important Approach ◽

High Oxidation Resistance

Recently, the use of refractory metal silicides as low resistivity, high temperature and high oxidation resistance gate materials in large scale integrated circuits (LSI) has become an important approach in advanced MOS process development (1). This research is a systematic study on the structure and properties of molybdenum silicide thin film and its applicability to high performance LSI fabrication.

Download Full-text