Comparative analysis of energy absorption behavior of tapered and grooved thin-walled tubes with the various geometry of the cross section

2018 ◽  
Vol 27 (8) ◽  
pp. 633-644 ◽  
Author(s):  
A. Asanjarani ◽  
A. Mahdian ◽  
S. H. Dibajian
Keyword(s):  
Comparative Analysis ◽  
Energy Absorption ◽  
Cross Section ◽  
Thin Walled ◽  
The Cross

Numerical Investigation of Cross-Section on Aluminum A6063 Thin-Walled Structures under Low-Velocity Impact Loading

2014 ◽  
Vol 1019 ◽  
pp. 96-102
Author(s):  
Ali Taherkhani ◽  
Ali Alavi Nia
Keyword(s):  
Energy Absorption ◽  
Cross Section ◽  
Cross Sections ◽  
Peak Load ◽  
Circular Cross Section ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Crush Strength

In this study, the energy absorption capacity and crush strength of cylindrical thin-walled structures is investigated using nonlinear Finite Elements code LS-DYNA. For the thin-walled structure, Aluminum A6063 is used and its behaviour is modeled using power-law equation. In order to better investigate the performance of tubes, the simulation was also carried out on structures with other types of cross-sections such as triangle, square, rectangle, and hexagonal, and their results, namely, energy absorption, crush strength, peak load, and the displacement at the end of tubes was compared to each other. It was seen that the circular cross-section has the highest energy absorption capacity and crush strength, while they are the lowest for the triangular cross-section. It was concluded that increasing the number of sides increases the energy absorption capacity and the crush strength. On the other hand, by comparing the results between the square and rectangular cross-sections, it can be found out that eliminating the symmetry of the cross-section decreases the energy absorption capacity and the crush strength. The crush behaviour of the structure was also studied by changing the mass and the velocity of the striker, simultaneously while its total kinetic energy is kept constant. It was seen that the energy absorption of the structure is more sensitive to the striker velocity than its mass.

Composite Core Cross Tube Crushing Analysis

2020 ◽  
Author(s):  
Sean Jenson ◽  
Muhammad Ali ◽  
Khairul Alam
Keyword(s):  
Energy Absorption ◽  
Compressive Loading ◽  
Deformation Mode ◽  
High Energy ◽  
Absorption Capacity ◽  
Functionally Graded ◽  
Layer By Layer ◽  
Thin Walled ◽  
The Cross ◽  
Energy Absorbing

Abstract Thin walled axial members are typically used in automobiles’ side and front chassis to improve crashworthiness of vehicles. Extensive work has been done in exploring energy absorbing characteristics of thin walled structural members under axial compressive loading. The present study is a continuation of the work presented earlier on evaluating the effects of inclusion of functionally graded cellular structures in thin walled members under axial compressive loading. A compact functionally graded composite cellular core was introduced inside a cross tube with side length and wall thickness of 25.4 mm and 3.048 mm, respectively. The parameters governing the energy absorbing characteristics such as deformation or collapsing modes, crushing/ reactive force, plateau stress level, and energy curves, were evaluated. The results showed that the inclusion of composite graded cellular structure increased the energy absorption capacity of the cross tube significantly. The composite graded structure underwent progressive stepwise, layer by layer, crushing mode and provided lateral stability to the cross tube thus delaying local tube wall collapse and promoting large localized folds on the tube’s periphery as compared to highly localized and compact deformation modes that were observed in the empty cross tube under axial compressive loading. The variation in deformation mode resulted in enhanced stiffness of the composite structure, and therefore, high energy absorption by the structure. This aspect has a potential to be exploited to improve the crashworthiness of automobile structures.

Design variation of thin-walled composite beam cross-section properties

2016 ◽  
Vol 12 (3) ◽  
pp. 558-576 ◽  
Author(s):  
Aníbal J.J. Valido ◽  
João Barradas Cardoso
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Laminated Composite ◽  
Adjoint System ◽  
Design Sensitivity ◽  
Content Type ◽  
Design Elements ◽  
Thin Walled ◽  
The Cross ◽  
Cross Section Geometry

Purpose The purpose of this paper is to present a design sensitivity analysis continuum formulation for the cross-section properties of thin-walled laminated composite beams. These properties are expressed as integrals based on the cross-section geometry, on the warping functions for torsion, on shear bending and shear warping, and on the individual stiffness of the laminates constituting the cross-section. Design/methodology/approach In order to determine its properties, the cross-section geometry is modeled by quadratic isoparametric finite elements. For design sensitivity calculations, the cross-section is modeled throughout design elements to which the element sensitivity equations correspond. Geometrically, the design elements may coincide with the laminates that constitute the cross-section. Findings The developed formulation is based on the concept of adjoint system, which suffers a specific adjoint warping for each of the properties depending on warping. The lamina orientation and the laminate thickness are selected as design variables. Originality/value The developed formulation can be applied in a unified way to open, closed or hybrid cross-sections.

scholarly journals Computation of Thin-Walled Cross-Section Resistance to Local Buckling with the Use of the Critical Plate Method

2016 ◽  
Vol 62 (2) ◽  
pp. 229-264 ◽  
Author(s):  
A. Szychowski
Keyword(s):  
Cross Section ◽  
Critical Stress ◽  
Analytical Calculation ◽  
Local Buckling ◽  
Stability Loss ◽  
Longitudinal Stress ◽  
Plate Method ◽  
Thin Walled ◽  
The Cross ◽  
Elastically Restrained

Abstract Thin-walled bars currently applied in metal construction engineering belong to a group of members, the cross-section res i stance of which is affected by the phenomena of local or distortional stability loss. This results from the fact that the cross-section of such a bar consists of slender-plate elements. The study presents the method of calculating the resistance of the cross-section susceptible to local buckling which is based on the loss of stability of the weakest plate (wall). The “Critical Plate” (CP) was identified by comparing critical stress in cross-section component plates under a given stress condition. Then, the CP showing the lowest critical stress was modelled, depending on boundary conditions, as an internal or cantilever element elastically restrained in the restraining plate (RP). Longitudinal stress distribution was accounted for by means of a constant, linear or non-linear (acc. the second degree parabola) function. For the critical buckling stress, as calculated above, the local critical resistance of the cross-section was determined, which sets a limit on the validity of the Vlasov theory. In order to determine the design ultimate resistance of the cross-section, the effective width theory was applied, while taking into consideration the assumptions specified in the study. The application of the Critical Plate Method (CPM) was presented in the examples. Analytical calculation results were compared with selected experimental findings. It was demonstrated that taking into consideration the CP elastic restraint and longitudinal stress variation results in a more accurate representation of thin-walled element behaviour in the engineering computational model.

Experimental and Numerical Study of the Energy Absorbed with Various Thickness of Thin Rectangular and Square Sections

2012 ◽  
Vol 229-231 ◽  
pp. 1120-1124
Author(s):  
Sajjad Dehghanpour ◽  
Sobhan Dehghanpour
Keyword(s):  
Numerical Analysis ◽  
Energy Absorption ◽  
Cross Section ◽  
Numerical Study ◽  
Rectangular Cross Section ◽  
Lateral Loading ◽  
Thin Walled

Impact is one of very important subjects which always have been considered in mechanical science. Nature of impact is such that which makes its control a hard task. Therefore it is required to present the transfer of impact to other vulnerable part of a structure, when it is necessary, one of the best method of absorbing energy of impact , is by using Thin-walled tubes these tubes collapses under impact and with absorption of energy, it prevents the damage to other parts. Purpose of recent study is to survey the deformation and energy absorption of tubes with different type of cross section (rectangular or square) and with similar volumes, height, mean cross section, and material under loading. Lateral loading of tubes are quasi-static type and beside as numerical analysis, also experimental experiences has been performed to evaluate the accuracy of the results. Results from the surveys is indicates that in a same conditions which mentioned above, samples with square cross section ,absorb more energy compare to rectangular cross section, and also by increscent in thickness, energy absorption would be more.

Poverty in the Dolnośląskie Voivodship

2016 ◽  
Vol 61 (6) ◽  
pp. 70-85
Author(s):  
Agata Girul
Keyword(s):  
Comparative Analysis ◽  
Cross Section ◽  
Objective Assessment ◽  
Subjective Assessment ◽  
Poverty Level ◽  
The Cross

The article presents selected aspects of economic poverty in the Dolnośląskie Voivodship on the background of the country and other voivodships, as well as in the cross-section of the Dolnośląskie powiats in 2013, as compared to 2010. The comparative analysis of poverty level by powiats was presented by means of taxonomic synthetic measure based on a set of three selected diagnostic indicators. A complement to the objective assessment of poverty in the Dolnośląskie Voivodship was a presentation of results of subjective assessment of material situation of households in the voivodships’ cross-section.

Collapse of Thin-Walled Elliptical Tubes for High Values of Major-to-Minor Axis Ratio

1993 ◽  
Vol 115 (4A) ◽  
pp. 432-440 ◽  
Author(s):  
C. Ribreau ◽  
S. Naili ◽  
M. Bonis ◽  
A. Langlet
Keyword(s):  
Contact Pressure ◽  
Cross Section ◽  
External Pressure ◽  
Straight Line Segment ◽  
Minor Axis ◽  
Cross Sectional ◽  
Axis Ratio ◽  
Straight Line ◽  
Thin Walled ◽  
The Cross

The topic of this study concerns principally representative models of some elliptical thin-walled anatomic vessels and polymeric tubes under uniform negative transmural pressure p (internal pressure minus external pressure). The ellipse’s ellipticity ko, defined as the major-to-minor axis ratio, varies from 1 up to 10. As p decreases from zero, at first the cross-section becomes somewhat oval, then the opposite sides touch in one point at the first-contact pressure pc. If p is lowered beneath pc, the curvature of the cross-section at the point of contact decreases until it becomes zero at the osculation pressure or the first line-contact pressure p1. For p<p1, the contact occurs along a straight-line segment, the length of which increases as p decreases. The pressures pc and p1 are determined numerically for various values of the wall thickness of the tubes. The nature of contact is especially described. The solution of the related nonlinear, two-boundary-values problem is compared with previous experimental results which give the luminal cross-sectional area (from two tubes), and the area of the mid-cross-section (from a third tube).

Structural bionic design for thin-walled cylindrical shell against buckling under axial compression

2011 ◽  
Vol 225 (11) ◽  
pp. 2619-2627 ◽  
Author(s):  
D Xing ◽  
W Chen ◽  
J Ma ◽  
L Zhao
Keyword(s):  
Cylindrical Shell ◽  
Axial Compression ◽  
Cross Section ◽  
Cylindrical Shells ◽  
High Load ◽  
Vascular Bundles ◽  
Bionic Design ◽  
Load Bearing ◽  
Thin Walled ◽  
The Cross

In nature, bamboo develops an excellent structure to bear nature forces, and it is very helpful for designing thin-walled cylindrical shells with high load-bearing efficiency. In this article, the cross-section of bamboo is investigated, and the feature of the gradual distribution of vascular bundles in bamboo cross-section is outlined. Based on that, a structural bionic design for thin-walled cylindrical shells is presented, of which the manufacturability is also taken into consideration. The comparison between the bionic thin-walled cylindrical shell and a simple hollow one with the same weight showed that the load-bearing efficiency was improved by 44.7 per cent.

Effects of Cross-Section Ovalization of Subsea Thin-Walled Bends Under In-Plane Bending

2010 ◽  
Author(s):  
Ranil Banneyake ◽  
Ayman Eltaher ◽  
Paul Jukes
Keyword(s):  
Cross Section ◽  
Computational Cost ◽  
Straight Pipe ◽  
Limit States ◽  
Element Analysis ◽  
High Tendency ◽  
Thin Walled ◽  
Plane Bending ◽  
The Cross ◽  
The Impact

Ovalization of the cross-section of bends under in-plane bending (a.k.a. Brazier effect) is a known phenomenon caused by the longitudinal stress acting on the cross-section as the pipe bends. Besides its tendency to induce stresses in the bend above what is predicted using simple beam theory, excessive cross-section ovalization is particularly critical to subsea pipes, as it can lead to collapse of the pipe under external pressure. Also, being in a plastic regime may cause the bend material to ratchet and undergo excessive strains under cyclic operational loads, especially under high-pressure high-temperature (HPHT) conditions. Ovalization normally results in local increase of stresses and could lead to failure of the bend before the bend globally reaches its limiting capacity. The offshore industry standards and design codes address the impact of initial ovality in straight pipes, but their applicability to bends is not clear. Therefore, this paper presents an investigation into the increased tendency of thin-walled bends to ovalize, and the effect of bend cross-section ovalization on their stiffness and yielding and collapse limit states, with emphasis on offshore applications. Due to the lack of analytical solutions for the bend response taking into account cross-section ovalization, finite element analysis (FEA) is used in this study. Predictions of the bend models are compared with those of straight pipe models and predictions of models of the bend made of beam elements (with pipe section) are compared with those of models made of brick /shell elements. The increased tendency of thin-walled bends to ovalize compared to straight pipes is investigated (e.g. 100 times in the linear range), and the impact and significance of ovalization in bends are assessed (e.g., stress increase of the order of 35% has been observed in some example situations). Also discussed in the paper is the selection of proper element specifications in order to accurately capture the ovalization response while keeping the computational cost manageable. Recommendations as to how to account for ovalization effects are presented. This paper helps to gain a better understanding of the response of subsea thin-walled bends under in-plane bending and their comparatively high tendency to ovalize compared to straight pipe, and emphasizes the significance of local effects such as cross-section ovalization, the overlooking of which may result in a significant underestimation of involved stresses and strains.

Sign in / Sign up

Export Citation Format

Share Document