Design of a novel magneto-rheological squeeze-film damper

2006 ◽  
Vol 15 (1) ◽  
pp. 164-170 ◽  
Author(s):  
C Carmignani ◽  
P Forte ◽  
E Rustighi
Keyword(s):  
Squeeze Film ◽  
Squeeze Film Damper ◽  
Magneto Rheological

Sliding Mode Control of Flexible Rotor Using Magneto Rheological Squeeze Film Damper

2012 ◽  
Author(s):  
Masoud Hemmatian ◽  
Abdolreza Ohadi
Keyword(s):  
Control Method ◽  
Sliding Mode ◽  
Open Loop ◽  
Squeeze Film ◽  
Flexible Rotor ◽  
Mr Fluid ◽  
Bingham Plastic ◽  
Squeeze Film Damper ◽  
Model Base ◽  
Magneto Rheological

This study aims to control the vibration of a flexible rotor system using magneto rheological squeeze film damper (MR-SFD). To evaluate the performance of damper, Bingham plastic model is used for MR fluid and the hydrodynamic equation of MR-SFD is presented. The remarkable point about this equation is the necessity of using numerical methods to solve it. These methods are too costly and impossible especially in the simulation of complex rotors and implementation of model base controllers. To fix this issue, an estimated equation is used in this paper for pressure distribution throughout the damper. By integration of this expression, hydrodynamic forces of MR-SFD are calculated as an algebraic equation. Furthermore, sliding mode controller is chosen as robust control method by considering the structural and parametric uncertainties of the system. Study time and frequency responses of flexible rotor in presence of these controllers show a good performance in reducing vibration of shafts midpoint. The results for the open loop system also indicate that changing the stiffness coefficient of elastic foundation and the temperature of MR fluid (as two uncertainties of system) strongly affects the outputs while using sliding mode controllers well increases the robustness of the system.

scholarly journals Analysis of a Compact Squeeze Film Damper with Magneto Rheological Fluid

2020 ◽  
Vol 70 (2) ◽  
pp. 122-130
Author(s):  
Rahul Kumar Singh ◽  
Mayank Tiwari ◽  
Anpeksh Ambreesh Saksena ◽  
Aman Srivastava
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Squeeze Film ◽  
Vibration Level ◽  
Mr Fluid ◽  
Squeeze Film Damper ◽  
Rotor Systems ◽  
Jeffcott Rotor ◽  
Magneto Rheological ◽  
Control Feedback

Rotor systems play vital role in many modern day machinery such as turbines, pumps, aeroengines, gyroscopes, to name a few. Due to unavoidable unbalance in the rotor systems, there are lateral and torsional vibrations. Ignoring these effects may cause the system serious damages, which sometimes lead to catastrophic failures. Vibration level in rotor systems is acceptable within a range. Focus in this work is to minimize the vibration level to the acceptable range. One of the ways vibration level can be minimised is by means of providing damping. To accomplish this task in this work a new concept squeeze film damper is made by electro discharge machining which is compact in configuration, is filled with magneto-rheological (MR) fluid and tested out on one support of a Jeffcott rotor. This compact squeeze film damper (SFD) produces damping in a compact volume of the device compared to a conventional SFD. MR fluid is a smart fluid, for which apparent viscosity changes with the application of external magnetic field. This compact damper with MR fluid provides the variable damping force, controlled by an external magnetic field. In this work, proportional controller has been used for providing the control feedback. This MR damper is seen to reduce vibrations in steady state and transient input to the Jeffcott rotor. Parametric study for important design parameters has been done with the help of the simulation model. These controlled dampers can be used for reducing vibrations under different operating conditions and also crossing critical speed.

Unbalance Response Control of Rotor by Magneto-Rheological Fluid Based Squeeze Film Damper

2005 ◽  
Author(s):  
Keun-Joo Kim ◽  
Chong-Won Lee
Keyword(s):  
Dynamic Stiffness ◽  
Squeeze Film ◽  
Effective Control ◽  
Control Algorithms ◽  
Value Analysis ◽  
Squeeze Film Damper ◽  
Unbalance Response ◽  
Flexible Rotors ◽  
Magneto Rheological ◽  
And Control

In this work, a magneto-rheological fluid based semi-active squeeze film damper (MR-SFD) is successfully applied to attenuate the excessive vibrations, especially unbalance responses, of a flexible rotor-bearing system. Using the linearized dynamic stiffness model of the MR-SFD, the optimal design and control algorithms that can effectively control excessive unbalance responses of flexible rotors are also proposed; the optimal damper location considering several flexible modes is systematically explored by means of the Structural Dynamics Modification technique. A simple, yet effective, control algorithm is also established in which the optimal input current levels are scheduled by using the singular value analysis. It is shown that the simulation and experimental results with a test rotor are in good agreement and that the proposed design and control algorithms of the MR-SFD are very effective in attenuation of unbalance response of the test rotor up to the second critical speed.

Determination of Damping Coefficient of a Bump Foil Squeeze Film Damper

2017 ◽  
Vol 8 (4) ◽  
Author(s):  
G. Saravanakumar ◽  
L. Ravikumar ◽  
R. Yogaraju ◽  
C. Shravankumar ◽  
V. Arunkumar
Keyword(s):  
Dynamic Characteristics ◽  
High Speed ◽  
Research Work ◽  
Squeeze Film ◽  
Jet Engines ◽  
Squeeze Film Damper ◽  
Squeeze Film Dampers ◽  
Magneto Rheological ◽  
Temperature Dynamic

The present investigation is aiming to get better squeeze film dampers which are normally used in high speed jet engines to minimize small amplitude large force vibrations. The investigation was started with squeeze film dampers employing conventional lubricating oils. Magneto rheological fluids are then used to enhance the viscosity characteristics of the fluid under the influence of magnetic fields in order to improve the damper performances. It is observed that the dynamic characteristics of the damper with magneto rheological fluids are enhanced. Further to improve the damper performance, few modifications in the damper assembly are carried out in this research work. A good amount of reduction in the amplitude of vibrations is observed in these modified squeeze film dampers coupled with magneto rheological fluids. This research work discusses dual and triple clearance squeeze film dampers and bump foil squeeze film damper, also subjected to variation in temperature. Dynamic characteristics are found to be decreasing as the viscosity of the fluid decreases with rise in temperature of the fluid.

Ball bearing turbocharger vibration management: application on high speed balancer

2020 ◽  
Vol 21 (6) ◽  
pp. 619
Author(s):  
Kostandin Gjika ◽  
Antoine Costeux ◽  
Gerry LaRue ◽  
John Wilson
Keyword(s):  
Dynamic Behavior ◽  
High Speed ◽  
Internal Combustion Engines ◽  
Ball Bearing ◽  
Squeeze Film ◽  
Design And Technology ◽  
Squeeze Film Damper ◽  
Damping Coefficients ◽  
Bearing Loads ◽  
Stiffness And Damping

Today's modern internal combustion engines are increasingly focused on downsizing, high fuel efficiency and low emissions, which requires appropriate design and technology of turbocharger bearing systems. Automotive turbochargers operate faster and with strong engine excitation; vibration management is becoming a challenge and manufacturers are increasingly focusing on the design of low vibration and high-performance balancing technology. This paper discusses the synchronous vibration management of the ball bearing cartridge turbocharger on high-speed balancer and it is a continuation of papers [1–3]. In a first step, the synchronous rotordynamics behavior is identified. A prediction code is developed to calculate the static and dynamic performance of “ball bearing cartridge-squeeze film damper”. The dynamic behavior of balls is modeled by a spring with stiffness calculated from Tedric Harris formulas and the damping is considered null. The squeeze film damper model is derived from the Osborne Reynolds equation for incompressible and synchronous fluid loading; the stiffness and damping coefficients are calculated assuming that the bearing is infinitely short, and the oil film pressure is modeled as a cavitated π film model. The stiffness and damping coefficients are integrated on a rotordynamics code and the bearing loads are calculated by converging with the bearing eccentricity ratio. In a second step, a finite element structural dynamics model is built for the system “turbocharger housing-high speed balancer fixture” and validated by experimental frequency response functions. In the last step, the rotating dynamic bearing loads on the squeeze film damper are coupled with transfer functions and the vibration on the housings is predicted. The vibration response under single and multi-plane unbalances correlates very well with test data from turbocharger unbalance masters. The prediction model allows a thorough understanding of ball bearing turbocharger vibration on a high speed balancer, thus optimizing the dynamic behavior of the “turbocharger-high speed balancer” structural system for better rotordynamics performance identification and selection of the appropriate balancing process at the development stage of the turbocharger.

scholarly journals Influence of Eccentricity and Angular Velocity on Force Effects on Rotor of Magnetorheological Damper

2018 ◽  
Vol 180 ◽  
pp. 02091
Author(s):  
Dominik Šedivý ◽  
Petr Ferfecki ◽  
Simona Fialová
Keyword(s):  
Magnetic Induction ◽  
Magnetorheological Damper ◽  
Squeeze Film ◽  
Fluid Viscosity ◽  
Squeeze Film Damper ◽  
Viscous Forces ◽  
Angular Velocities ◽  
Volume Method ◽  
Gap Width ◽  
Made In

This article presents the evaluation of force effects on squeeze film damper rotor. The rotor is placed eccentrically and its motion is translate-circular. The amplitude of rotor motion is smaller than its initial eccentricity. The force effects are calculated from pressure and viscous forces which were measured by using computational modeling. Damper was filled with magnetorheological fluid. Viscosity of this non-Newtonian fluid is given using Bingham rheology model. Yield stress is not constant and it is a function of magnetic induction which is described by many variables. The most important variables of magnetic induction are electric current and gap width between rotor and stator. The simulations were made in finite volume method based solver. The motion of the inner ring of squeeze film damper was carried out by dynamic mesh. Numerical solution was solved for five different initial eccentricities and angular velocities of rotor motion.

Numerical investigation of dynamic and hydrodynamic characteristics of the pad in the fluid pivot journal bearing

2021 ◽  
pp. 135065012110330
Author(s):  
Tuyen Vu Nguyen ◽  
Weiguang Li
Keyword(s):  
Computational Models ◽  
Journal Bearing ◽  
Squeeze Film ◽  
Hydrodynamic Characteristics ◽  
Hydrodynamic Properties ◽  
Squeeze Film Damper ◽  
Lubricant Oil ◽  
Oil Flow ◽  
Flow Through ◽  
Bearing System

The dynamic and hydrodynamic properties of the pad in the fluid pivot journal bearing are investigated in this paper. Preload coefficients, recess area, and size gap, which were selected as input parameters to investigate, are important parameters of fluid pivot journal bearing. The pad’s pendulum angle, lubricant oil flow through the gap, and recess pressure which characterizes the squeeze film damper were investigated with different preload coefficients, recess area, and gap sizes. The computational models were established and numerical methods were used to determine the equilibrium position of the shaft-bearing system. Since then, the pendulum angle of the pad, liquid flow, and recess pressure were determined by different eccentricities.

scholarly journals Dynamic Performance of a Squeeze Film Damper with a Cylindrical Roller Bearing under a Large Static Radial Loading Range

Machines ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 14 ◽  
Author(s):  
Hans Meeus ◽  
Jakob Fiszer ◽  
Gabriël Van De Velde ◽  
Björn Verrelst ◽  
Wim Desmet ◽  
...  
Keyword(s):  
Roller Bearing ◽  
Squeeze Film ◽  
Stable Operation ◽  
Large Power ◽  
Squeeze Film Damper ◽  
Depth Analysis ◽  
Rotor Support ◽  
Cylindrical Roller Bearing ◽  
Radial Loading ◽  
Cylindrical Roller

Turbomachine rotors, supported by little damped rolling element bearings, are generally sensitive to unbalance excitation. Accordingly, most machines incorporate squeeze film damper technology to dissipate mechanical energy caused by rotor vibrations and to ensure stable operation. When developing a novel geared turbomachine able to cover a large power range, a uniform mechanical drivetrain needs to perform well over the large operational loading range. Especially, the rotor support, containing a squeeze film damper and cylindrical roller bearing in series, is of vital importance in this respect. Thus, the direct objective of this research project was to map the performance of the envisioned rotor support by estimating the damping ratio based on the simulated and measured vibration response during run-up. An academic test rig was developed to provide an in-depth analysis on the key components in a more controlled setting. Both the numerical simulation and measurement results exposed severe vibration problems for an insufficiently radial loaded bearing due to a pronounced anisotropic bearing stiffness. As a result, a split first whirl mode arose with its backward component heavily triggered by the synchronous unbalance excitation. Hence, the proposed SFD does not function properly in the lower radial loading range. Increasing the static load on the bearing or providing a modified rotor support for the lower power variants will help mitigating the vibration issues.

Sign in / Sign up

Export Citation Format

Share Document