Study on interaction between plasma and electromagnetic field in ion source of 10cm ECR ion thruster

2022 ◽  
Author(s):  
Hao Mou ◽  
Yi-Zhou Jin ◽  
Juan Yang ◽  
Xu Xia ◽  
Yu-Liang Fu
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
Plasma Density ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Electron Cyclotron Resonance ◽  
Ion Beam ◽  
Power Level ◽  
Boundary Region ◽  
Ion Source

Abstract Through diagnosing plasma density and calculating the intensity of microwave electric field, four 10cm electron cyclotron resonance (ECR) ion sources with different magnetic field structures are studied to reveal the inside interaction between plasma, magnetic field and microwave electric field. From the diagnosing result it can be found that the plasma density distribution is controlled by the plasma generation and electron loss volumes associated with magnetic field and microwave power level. Based on the cold plasma hypothesis and diagnosing result, the microwave electric field intensity distribution in the plasma is calculated. The result shows that the plasma will significantly change the distribution of microwave electric field intensity to form a bow shape. From the boundary region of the shape to the center, the electric field intensity varies from higher to lower and the diagnosed density inversely changes. If the bow and its inside lower electric field intensity region is close to the screen grid, the performance of ion beam extracting will be better. The study can provide useful information for the creating of 10cm ECR ion source and understanding its mechanism.

scholarly journals Expansion of tungsten ions emitted from laser-produced plasma in axial magnetic and electric fields

2002 ◽  
Vol 20 (1) ◽  
pp. 113-118 ◽  
Author(s):  
J. WOŁOWSKI ◽  
L. CELONA ◽  
G. CIAVOLA ◽  
S. GAMMINO ◽  
J. KRÁSA ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Electric Fields ◽  
Electron Cyclotron Resonance ◽  
Ion Beam ◽  
Ion Source ◽  
Particle Accelerators ◽  
Laser Ion Source ◽  
Experimental Conditions ◽  
Laser Produced Plasma ◽  
Beam Parameters

The experimental results of the investigations on the influence of external magnetic and electric fields on the characteristics of a tungsten ion stream emitted from a plasma produced by the Nd:glass laser (1 J, 1 ns) performed at IPPLM, Warsaw are presented. A negatively biased target up to −15 kV and a magnetic field up to 0.45 T were used in the experiment. A set of ion collectors and an electrostatic cylindrical ion energy analyzer located at small angles with respect to the laser beam axis and at large distances from the target were applied for ion measurements. The effect of an external magnetic field is essential to plasma expansion, but the effect of the retarding potential of the target is very weak in our experimental conditions. The aim of the studies was to prove the possibility of the optimization of ion beam parameters from laser-produced plasma for the particular application as a laser ion source coupled with the electron cyclotron resonance ion source for particle accelerators.

scholarly journals Evaluation of mobile microwave radiation severity at al-door residential complex in Iraq

2019 ◽  
Vol 14 (3) ◽  
pp. 1281
Author(s):  
Younes S. Alwan ◽  
Mohammad Sami Zidan ◽  
Mohammed Qasim Taha
Keyword(s):  
Magnetic Field ◽  
Electric Field ◽  
Electromagnetic Radiation ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Magnetic Field Intensity ◽  
Radiation Density ◽  
Microwave Signals ◽  
The Magnetic Field ◽  
Dangerous Level

In this paper, the electromagnetic radiation of the mobile microwave signals, propagated by the mobile towers in Al-Door Residential Complex west of Iraq, is measured and evaluated. This complex contains main nodes and hub repeaters and feeders to transmit the service to the whole Salahuddin and the northern provinces. Therefore, this paper focused on this area to assess the radiation and to assess the radiation whether it is safe for humans or exceeded the dangerous level. The area has been divided on to 19 locations where there are mobile towers and the radiation is measured in these locations. The electric field intensity is unsafe and should be improved since it exceeds the level of 1.7 V/m. However, the magnetic field intensity is acceptable according to the measurements. In general, the electromagnetic radiation density is unsafe since many readings override the level of 1.3 μW/〖cm〗^2. The standards of the radiation severity are based on the recommendations of LATNEX Corp.

Enhancement of Ar8+Ion Beam Intensity from RIKEN 18 GHz Electron Cyclotron Resonance Ion Source by Optimizing the Magnetic Field Configuration

2003 ◽  
Vol 42 (Part 1, No. 6A) ◽  
pp. 3656-3657 ◽  
Author(s):  
Yoshihide Higurashi ◽  
Takahide Nakagawa ◽  
Masanori Kidera ◽  
Toshimitsu Aihara ◽  
Masayuki Kase ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Cyclotron Resonance ◽  
Electron Cyclotron Resonance ◽  
Ion Beam ◽  
Field Configuration ◽  
Ion Source ◽  
Electron Cyclotron ◽  
Beam Intensity ◽  
Magnetic Field Configuration ◽  
The Magnetic Field

High-speed isotachophoresis. Analytical aspects of the steady-state longitudinal temperature profiles

1979 ◽  
Vol 44 (3) ◽  
pp. 841-853 ◽  
Author(s):  
Zbyněk Ryšlavý ◽  
Petr Boček ◽  
Miroslav Deml ◽  
Jaroslav Janák
Keyword(s):  
Steady State ◽  
Temperature Distribution ◽  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Minor Component ◽  
Physical Models ◽  
Temperature Profiles ◽  
Longitudinal Temperature ◽  
Continuous Character

The problem of the longitudinal temperature distribution was solved and the bearing of the temperature profiles on the qualitative characteristics of the zones and on the interpretation of the record of the separation obtained from a universal detector was considered. Two approximative physical models were applied to the solution: in the first model, the temperature dependences of the mobilities are taken into account, the continuous character of the electric field intensity at the boundary being neglected; in the other model, the continuous character of the electric field intensity is allowed for. From a comparison of the two models it follows that in practice, the variations of the mobilities with the temperature are the principal factor affecting the shape of the temperature profiles, the assumption of a discontinuous jump of the electric field intensity at the boundary being a good approximation to the reality. It was deduced theoretically and verified experimentally that the longitudinal profiles can appreciably affect the longitudinal variation of the effective mobilities in the zone, with an infavourable influence upon the qualitative interpretation of the record. Pronounced effects can appear during the analyses of the minor components, where in the corresponding short zone a temperature distribution occurs due to the influence of the temperatures of the neighbouring zones such that the temperature in the zone of interest in fact does not attain a constant value in axial direction. The minor component does not possess the steady-state mobility throughout the zone, which makes the identification of the zone rather difficult.

POLARON IN A QUANTUM DOT UNDER AN ELECTRIC FIELD

2007 ◽  
Vol 21 (24) ◽  
pp. 1635-1642
Author(s):  
MIAN LIU ◽  
WENDONG MA ◽  
ZIJUN LI
Keyword(s):  
Quantum Dot ◽  
Electric Field ◽  
Field Intensity ◽  
Ground State Energy ◽  
Ground State ◽  
Electric Field Intensity ◽  
State Energy ◽  
Theoretical Study ◽  
The Moment ◽  
Transformation Methods

We conducted a theoretical study on the properties of a polaron with electron-LO phonon strong-coupling in a cylindrical quantum dot under an electric field using linear combination operator and unitary transformation methods. The changing relations between the ground state energy of the polaron in the quantum dot and the electric field intensity, restricted intensity, and cylindrical height were derived. The numerical results show that the polar of the quantum dot is enlarged with increasing restricted intensity and decreasing cylindrical height, and with cylindrical height at 0 ~ 5 nm , the polar of the quantum dot is strongest. The ground state energy decreases with increasing electric field intensity, and at the moment of just adding electric field, quantum polarization is strongest.

scholarly journals Effects of Flash Sintering Parameters on Performance of Ceramic Insulator

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1157
Author(s):  
Yong Liu ◽  
Xingwang Huang
Keyword(s):  
Grain Size ◽  
Electric Field ◽  
Field Intensity ◽  
Current Density ◽  
Electric Field Intensity ◽  
Unit Cell ◽  
Uniform Structure ◽  
Ceramic Insulator ◽  
Flash Sintering ◽  
Ceramic Insulators

Ceramic outdoor insulators play an important role in electrical insulation and mechanical support because of good chemical and thermal stability, which have been widely used in power systems. However, the brittleness and surface discharge of ceramic material greatly limit the application of ceramic insulators. From the perspective of sintering technology, flash sintering technology is used to improve the performance of ceramic insulators. In this paper, the simulation model of producing the ceramic insulator by the flash sintering technology was set up. Material Studio was used to study the influence of electric field intensity and temperature on the alumina unit cell. COMSOL was used to study the influence of electric field intensity and current density on sintering speed, density and grain size. Obtained results showed that under high temperature and high voltage, the volume of the unit cell becomes smaller and the atoms are arranged more closely. The increase of current density can result in higher ceramic density and larger grain size. With the electric field intensity increasing, incubation time shows a decreasing tendency and energy consumption is reduced. Ceramic insulators with a higher uniform structure and a smaller grain size can show better dielectric performance and higher flashover voltage.

scholarly journals Frequency-Tunable Terahertz Plasmonic Structure Based on the Solid Immersed Method for Sensing

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1419
Author(s):  
Toshio Sugaya ◽  
Yukio Kawano
Keyword(s):  
Electric Field ◽  
Field Intensity ◽  
Electric Field Intensity ◽  
Wavelength Region ◽  
Diffraction Limit ◽  
Field Analysis ◽  
Plasmonic Structure ◽  
Sensing Applications ◽  
Frequency Tunable ◽  
Bull's Eye

Terahertz waves are located in the frequency band between radio waves and light, and they are being considered for various applications as a light source. Generally, the use of light requires focusing; however, when a terahertz wave is irradiated onto a small detector or a small measurement sample, its wavelength, which is much longer than that of visible light, causes problems. The diffraction limit may make it impossible to focus the terahertz light down to the desired range by using common lenses. The Bull’s Eye structure, which is a plasmonic structure, is a promising tool for focusing the terahertz light beyond the diffraction limit and into the sub-wavelength region. By utilizing the surface plasmon propagation, the electric field intensity and transmission coefficient can be enhanced. In this study, we improved the electric field intensity and light focusing in a small region by adapting the solid immersion method (SIM) from our previous study, which had a frequency-tunable nonconcentric Bull’s Eye structure. Through electromagnetic field analysis, the electric field intensity was confirmed to be approximately 20 times higher than that of the case without the SIM, and the transmission measurements confirmed that the transmission through an aperture had a gap of 1/20 that of the wavelength. This fabricated device can be used in imaging and sensing applications because of the close contact between the transmission aperture and the measurement sample.

Sign in / Sign up

Export Citation Format

Share Document