scholarly journals Effects of Sliding Velocity and Thermal Conduction of the Tool on X20Cr4 Steel Friction Coefficient and Structure in Nanostructuring Burnishing

2018 ◽  
Vol 1045 ◽  
pp. 012002
Author(s):  
V P Kuznetsov ◽  
A S Skorobogatov ◽  
M L Lobanov ◽  
A S Yurovskih ◽  
M S Khadyev ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Thermal Conduction ◽  
Sliding Velocity ◽  
Nanostructuring Burnishing

Viscous Friction Effect During the Process of Tightening and Loosening of Bolted Joints

2021 ◽  
Author(s):  
Qingyuan Lin ◽  
Yong Zhao ◽  
Qingchao Sun ◽  
Kunyong Chen
Keyword(s):  
Friction Coefficient ◽  
Viscous Friction ◽  
Normal Pressure ◽  
Friction Model ◽  
Bolted Joints ◽  
Critical Parameters ◽  
Bolted Joint ◽  
Sliding Velocity ◽  
Friction Effect ◽  
Bearing Friction

Abstract Bolted connection is one of the most widely used mechanical connections because of its easiness of installation and disassembly. Research of bolted joints mainly focuses on two aspects: high precision tightening and improvement of anti-loosening performance. The under-head bearing friction coefficient and the thread friction coefficient are the two most important parameters that affect the tightening result of the bolted joint. They are also the most critical parameters that affect the anti-loosening performance of the bolted joint. Coulomb friction model is a commonly used model to describe under-head bearing friction and thread friction, which considers the friction coefficient as a constant independent of normal pressure and relative sliding velocity. In this paper, the viscous effect of the under-head bearing friction and thread friction is observed by measuring the friction coefficient of bolted joints. The value of the friction coefficient increases with the increase of the relative sliding velocity and the decrease of the normal pressure. It is found that the Coulomb viscous friction model can better describe the friction coefficient of bolted joints. Taking into account the dense friction effect, the loosening prediction model of bolted joints is modified. The experimental results show that the Coulomb viscous friction model can better describe the under-head bearing friction coefficient and thread friction coefficient. The model considering the dense effect can more accurately predict the loosening characteristics of bolted joints.

Desirability of Tribo-Performance of Natural Based Thermoset and Thermoplastic Composites: A Concise Review

2021 ◽  
Author(s):  
Aravind Dhandapani ◽  
Senthilkumar Krishnasamy ◽  
Thitinun Ungtrakul ◽  
Senthil Muthu Kumar Thiagamani ◽  
Rajini Nagarajan ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Relative Motion ◽  
Operating Temperature ◽  
Natural Fibers ◽  
Specific Wear Rate ◽  
Thermoplastic Composites ◽  
Sliding Velocity ◽  
Concise Review ◽  
Sliding Distance

Tribology, which may be defined as an interdisciplinary subject, deals with relative motion between two or more bodies, i.e., surfaces that are interacting relatively. Thus, tribology is a science covering three vital classes, namely, 1) wear, 2) friction, and 3) lubrication. The focus of this article is to bring out the elements that are influencing the wear-resisting behavior of thermosetting and thermoplastic composites with natural-based constituents. It was also identified from the literature sources that 1) the treatments on the natural fibers acting as reinforcement and 2) the addition of fillers in resin acting as matrix could improve the wear-resisting behavior of the composites. Additionally, other conditions such as 1) sliding speed, 2) sliding velocity, 3) sliding distance, and 4) operating temperature could also influence the friction coefficient and specific wear rate of the natural-based composites.

Friction Coefficient and Wear Rate of Different Materials Sliding Against Stainless Steel

2013 ◽  
Vol 1 (1) ◽  
pp. 33-45 ◽  
Author(s):  
Dewan Muhammad Nuruzzaman ◽  
Mohammad Asaduzzaman Chowdhury
Keyword(s):  
Stainless Steel ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Normal Load ◽  
304 Stainless Steel ◽  
Sliding Velocity ◽  
Stainless Steel 304 ◽  
Different Types ◽  
Pin On Disc ◽  
Ss 304

This paper examines the relation between friction/wear and different types of steel materials under different normal loads and sliding velocities and to explore the possibility of adding controlled normal load and sliding velocity to a mechanical process. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 304 (SS 304), stainless steel 316 (SS 316) and mild steel slide against stainless steel 304 (SS 304) pin. Variations of friction coefficient with the duration of rubbing at different normal loads and sliding velocities are investigated. Results show that friction coefficient varies with duration of rubbing, normal load and sliding velocity. In general, friction coefficient increases for a certain duration of rubbing and after that it remains constant for the rest of the experimental time. The obtained results reveal that friction coefficient decreases with the increase in normal load for all the tested materials. It is also found that friction coefficient increases with the increase in sliding velocity for all the materials investigated. Moreover, wear rate increases with the increase in normal load and sliding velocity. At identical operating condition, the magnitudes of friction coefficient and wear rate are different for different materials depending on sliding velocity and normal load.

scholarly journals Ice friction: the effect of thermal conductivity

2010 ◽  
Vol 56 (197) ◽  
pp. 473-479 ◽  
Author(s):  
Anne-Marie Kietzig ◽  
Savvas G. Hatzikiriakos ◽  
Peter Englezos
Keyword(s):  
Thermal Conductivity ◽  
Friction Coefficient ◽  
Boundary Friction ◽  
Sliding Velocity ◽  
Ice Friction ◽  
Mixed Friction ◽  
Friction Regime ◽  
Wide Range

AbstractThe effect of thermal conductivity on ice friction is studied systematically for different metallic slider materials over a wide range of temperatures, and sliding velocities. By thermally insulating the slider with fiberglass, the isolated effect of thermal conductivity on ice friction is investigated. A decrease of the friction coefficient in the boundary friction regime and an earlier onset of the mixed friction regime in terms of sliding velocity are found. Furthermore, the dependence of the ice friction coefficient on sliding velocity is compared for different sliding materials. It is found that the influence and importance of thermal conductivity decreases with increasing sliding velocity.

Comparison of the Friction and Wear Properties of PTFE Coatings under Vacuum Conditions before and after Gamma Irradiation

2011 ◽  
Vol 311-313 ◽  
pp. 1177-1181 ◽  
Author(s):  
Xing Dong Yuan ◽  
Bin Xu ◽  
Xiao Jie Yang ◽  
Hai Long Ma
Keyword(s):  
Friction Coefficient ◽  
Gamma Irradiation ◽  
Friction And Wear ◽  
Sliding Velocity ◽  
Wear Properties ◽  
Sliding Speed ◽  
Wear Process ◽  
Before And After ◽  
Three Stages ◽  
Friction And Wear Properties

The friction and wear properties of Polytetrafluoroethylene (PTFE) coatings before and after gamma irradiation were studied under vacuum conditions. Experimental results indicated that the friction and wear properties of PTFE coatings were improved by gamma irradiation. Results showed that the wear process of PTFE coatings before and after gamma irradiation consists of three stages. The steps for the irradiated PTFE are slightly longer than that for the non-irradiated samples. The friction coefficient of irradiated PTFE coatings reduces slightly compared to that of the non-irradiated samples. The friction coefficients of the PTFE coatings before and after gamma irradiation first increase with the increase of sliding velocity and then decrease with the increase of sliding velocity, and The friction coefficient of PTFE coatings before and after gamma irradiation decreases with the increase of load. The wear of irradiated PTFE coatings is slightly lower than that of non-irradiated PTFE coatings. The wear of PTFE coatings before and after gamma irradiation first decreases with the increase of sliding speed and then increases as the sliding speed increases. The wear of PTFE coatings first decreases with the increase of load and then increases with the increase of load. Scanning electron microscope (SEM) was utilized to investigate the worn surfaces.

Experiment and simulation of friction coefficient of polyoxymethylene

2018 ◽  
Vol 70 (2) ◽  
pp. 273-281 ◽  
Author(s):  
Xiaoshuang Xiong ◽  
Lin Hua ◽  
Xiaojin Wan ◽  
Can Yang ◽  
Chongyang Xie ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Friction Coefficient ◽  
Contact Pressure ◽  
Friction Force ◽  
Normal Load ◽  
Fe Model ◽  
Sliding Velocity ◽  
Experiment Data ◽  
Simulation Data ◽  
Content Type

Purpose The purposes of this paper include studying the friction coefficient of polyoxymethylene (POM) under a broad range of normal load and sliding velocity; developing a mathematical model of friction coefficient of POM under a broad range of normal loads and sliding velocities; and applying the model to dynamic finite element (FE) analysis of mechanical devices containing POM components. Design/methodology/approach Through pin-on-disc experiment, the friction coefficient of POM in different normal loads and sliding velocities is investigated; the average contact pressure is between 5 and 15 Mpa and the sliding velocity is from 0.05 to 0.9 m/s. A friction algorithm is developed and embedded in the FE model to simulate the friction of POM in different normal loads and sliding velocities. Findings The friction coefficient of POM against steel declines with the increase of normal loads when the contact pressure is between 5 and 15 Mpa. The friction coefficient of POM against steel increases markedly when the sliding velocity is between 0.05 and 0.15 m/s, it decreases sharply between 0.15-0.45 m/s and then it stabilizes at high sliding velocity between 0.45 and 0.9 m/s. The friction coefficient of POM in different working operations has a significant effect on contact stress and shear stress. The simulation data and experiment data of POM friction force fit very well; therefore, it can be concluded that the friction algorithm and FE model are accurate. Originality/value The friction coefficient of POM under a broad range of normal loads and sliding velocities is investigated. The friction coefficient model of POM is established as a function of normal loads and sliding velocities in the dry sliding condition. A friction algorithm is developed and embedded in the FE model of the friction of POM. The mathematical model of the friction coefficient accurately agrees with the experiment data, and simulation data and experiment data of the POM friction force fit very well.

scholarly journals NUMERICAL MODEL OF A LOCAL CONTACT OF A POLYMER NANOCOMPOSITE AND ITS EXPERIMENTAL VALIDATION

2021 ◽  
Vol 19 (1) ◽  
pp. 079
Author(s):  
Andrey I. Dmitriev
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Friction Coefficient ◽  
Experimental Validation ◽  
Polymer Nanocomposite ◽  
Characteristic Size ◽  
Dry Sliding ◽  
Sliding Velocity ◽  
Low Friction ◽  
Local Contact

In the paper a model of a local contact of a polymer-based nanocomposite was developed within the method of a movable cellular automaton. The features of mechanical behavior of nanocomposite at the mesoscale level under dry sliding were studied with explicit account for the microprofile of the counterbody surface and the characteristic sizes of nanofiller. Factors that contribute to the conditions for the formation of a stable tribofilm of silica nanoparticles are analyzed. Two other parameters like sample geometry and the value of relative sliding velocity are also examined. It is shown that the thickness of tribofilm depends on stress conditions at the contact, and the friction coefficient decreases with increasing sliding velocity similar to one observed experimentally. To ensure the low friction properties of polymer nanocomposite, particles whose sizes are comparable with the characteristic size of the substrate microprofile are preferred. Results of numerical simulation are in good correlation with available experimental data.

scholarly journals Modeling and Analysis for Wear Performance in Dry Sliding of Epoxy/Glass/PTW Composites Using Full Factorial Techniques

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
M. Sudheer ◽  
Ravikantha Prabhu ◽  
K. Raju ◽  
Thirumaleshwara Bhat
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Hybrid Composites ◽  
Normal Load ◽  
Glass Fibers ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Sliding Velocity ◽  
Wear Performance ◽  
Full Factorial

The dry sliding friction and wear behavior of epoxy hybrid composites reinforced with glass fibers and a varying amount of potassium titanate whiskers (PTWs) fabricated by vacuum hand layup method were studied. The influence of normal load, sliding velocity, and whisker content on both friction coefficient and specific wear rate was investigated on a pin-on-disc machine. The tests were conducted at ambient conditions based on the 3 × 3 (3 factors at 3 levels) full factorial design. Analysis of variance (ANOVA) was performed to obtain the contribution of control parameters on friction coefficient and wear rate. The density and hardness of the composites were found to be enhanced with the PTW loading. The friction coefficient and wear resistance of the hybrid composites were found to be improved with the whisker content and were also greatly influenced by normal load and sliding velocity. A correlation between dry sliding wear behaviors of composites with wear parameters was obtained by multiple regressions. The worn out surface of selected samples was observed under scanning electron microscope (SEM) to identify wear mechanisms. This study revealed that the addition of the ceramic microfillers such as PTW improves the wear performance of the epoxy/glass polymer composites significantly.

scholarly journals Friction and Wear Behavior of Polyimide Composites Reinforced by Surface-Modified Poly-p-Phenylenebenzobisoxazole (PBO) Fibers in High Ambient Temperatures

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1805
Author(s):  
Yu ◽  
Zhang ◽  
Tang ◽  
Gao
Keyword(s):  
Wear Resistance ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Friction And Wear ◽  
Wear Behavior ◽  
Specific Wear Rate ◽  
Interface Properties ◽  
Sliding Velocity ◽  
Friction And Wear Behavior ◽  
Ambient Temperatures

(1) In order to improve the properties of antifriction and wear resistance of polyimide (PI) composite under high temperature conditions, (2) 3-Aminopropyltriethoxysilane (APTES) and Lanthanum (La) salt modifications were employed to manufacture poly-p-phenylenebenzobisoxazole (PBO)/PI composites with different interface properties. The representative ambient temperatures of 130 and 260 °C were chosen to study the friction and wear behavior of composites with different interface properties. (3) Results revealed that while both modification methods can improve the chemical activity of the surface of PBO fibers, the La salt modification is more effective. The friction coefficient of all composites decreases with the increase of sliding velocity and load at two temperatures, and the specific wear rate is increases. Contrary to the situation in the 130 °C environment, the wear resistance of the unmodified composite in the 260 °C environment is greatly affected by the sliding velocity and load, while the modified composites are less affected. Under the same test parameters, the PBO–La/PI composite has the lowest specific wear rate and friction coefficient, and (4) La salt modification is a more effective approach to improve the properties of antifriction and wear resistance of PI composite than APTES modification in high ambient temperatures.

Optimization of tribological behavior of Pongamia oil blends as an engine lubricant additive

2015 ◽  
Vol 4 (5) ◽  
Author(s):  
Yashvir Singh ◽  
Rajnish Garg ◽  
Suresh Kumar
Keyword(s):  
Weight Loss ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Tribological Behavior ◽  
Lubricant Additive ◽  
Sliding Velocity ◽  
Oil Blends ◽  
Control Factors ◽  
Oil Percentage ◽  
Pongamia Oil

AbstractThis investigation reports on the effect of Pongamia oil doped with lube oil on tribological characteristics of Al-7% Si alloy using the Taguchi method. The control factors involved were Pongamia oil percentage (PB 0%, PB 15%, PB 30%), sliding velocity (1.3 m/s, 2.5 m/s, 3.8 m/s) and load (50 N, 100 N, 150 N) which was optimized for weight loss, friction coefficient and wear rate characteristics of Al-7% Si alloy. The conventional lubricant SAE 40 was used for the experiment and for contamination. In this study, L

Sign in / Sign up

Export Citation Format

Share Document