scholarly journals Research and Application of Flutter Suppression Technology for Aeroengine Case Machining

2021 ◽  
Vol 2095 (1) ◽  
pp. 012065
Author(s):  
Yang Xiao ◽  
Bo Liu ◽  
Jie Wei ◽  
Chenfan Xiao ◽  
Tian Li ◽  
...  
Keyword(s):  
Processing System ◽  
Good Effect ◽  
Inertia Force ◽  
Main Role ◽  
Thin Wall ◽  
Processing Quality ◽  
Ansys Analysis ◽  
Large Size ◽  
High Processing

Abstract The magazine is an important part of the aero-engine, its main role is to bear the load and mass inertia force generated by the engine in the work. The design and manufacturing level of the magazine is of great significance to improve the aero-engine’s quality. Engine magazine belongs to a thin-wall cylinder part with large size, complex shape and high processing precision. Due to its thin wall rigidity difference, the processing quality is easy to reduce caused by the vibration of machine tools and other processing system, and cannot meet the requirements. According to the absorption principle of TMD (Tuning Mass Damper), an auxiliary fixture is designed to transfer the magazine processing vibration energy to the auxiliary fixture to reduce the vibration of the processing system and to improve the processing quality. Through ANSYS analysis, the maximum vibration amplitude of the magazine was reduced by 60% by using this fixture. Therefore, the fixture can significantly reduce the vibration in the processing and have good effect on improving the quality of the processing. The auxiliary fixture has the advantages of simple installation, simple disassembly, and strong scalability.

Effect of HMW-GS Deletion on Processing Quality of Soft Wheat Ningmai 9

2016 ◽  
Vol 42 (5) ◽  
pp. 633
Author(s):  
Ping-Ping ZHANG ◽  
Hong-Xiang MA ◽  
Jin-Bao YAO ◽  
Miao-Ping ZHOU ◽  
Peng ZHANG
Keyword(s):  
Soft Wheat ◽  
Processing Quality

Pemanfaatan Sistem Informasi Terhadap Kinerja Pelayanan, Sirkulasi Buku Dan Pengolahan Arsip

2018 ◽  
Vol 4 (1) ◽  
pp. 87-96
Author(s):  
Yanni Suherman
Keyword(s):  
Information System ◽  
Data Processing ◽  
System Development ◽  
Processing System ◽  
Data Processing System ◽  
Data Archiving ◽  
Data Archives ◽  
Development Life Cycle ◽  
Search Data

Research conducted at the Office of Archives and Library of Padang Pariaman Regency aims to find out the data processing system library and data archiving. All data processing is done is still very manual by using the document in writing and there is also a stacking of archives on the service. By utilizing library information systems and archives that will be applied to the Office of Archives and Library of Padang Pariaman Regency can improve the quality of service that has not been optimal. This research was made by using System Development Life Cycle (SDLC) which is better known as waterfall method. The first step taken on this method is to go directly to the field by conducting interviews and discussions. This information system will be able to assist the work of officers in terms of data processing libraries and facilitate in search data archives by presenting reports more accurate, effective and efficient.

Effect of sheeting thickness on the processing quality of wheat-oat blended flour noodles

2021 ◽  
Vol 99 ◽  
pp. 103223
Author(s):  
Zhaojian Shi ◽  
Ling Liu ◽  
Kailong Zhang ◽  
Xiaolong Wang ◽  
Zhen Ma ◽  
...  
Keyword(s):  
Processing Quality

scholarly journals The effects of locations on the build tray on the quality of specimens in powder bed additive manufacturing

2021 ◽  
Author(s):  
Snehashis Pal ◽  
Nenad Gubeljak ◽  
Tonica Bončina ◽  
Radovan Hudák ◽  
Teodor Toth ◽  
...  
Keyword(s):  
Main Role ◽  
Particle Sizes ◽  
Additional Experiment ◽  
Powder Bed ◽  
Melt Pool ◽  
Start Line ◽  
Sample Density ◽  
Powder Layering ◽  
Pool Formation

AbstractIn this study, the effect of powder spreading direction was investigated on selectively laser-melted specimens. The results showed that the metallurgical properties of the specimens varied during fabrication with respect to their position on the build tray. The density, porosity, and tensile properties of the Co–Cr–W–Mo alloy were investigated on cuboid and tensile specimens fabricated at different locations. Two different significant positions on the tray were selected along the powder spreading direction. One set of specimens was located near the start line of powder spreading, and the other set was located near the end of the building tray. The main role in the consequences of powder layering was played by the distribution of powder particle sizes and the packing density of the layers. As a result, laser penetration, melt pool formation, and fusion characteristics varied. To confirm the occurrence of variations in sample density, an additional experiment was performed with a Ti–6Al–4V alloy. Furthermore, the powders were collected at two different fabricating locations and their size distribution for both materials was investigated.

scholarly journals Effect of Laser Beam Focusing Adjustment on the Processing Quality of Aluminum Nitride Ceramic Micro-Holes

2021 ◽  
Vol 1865 (2) ◽  
pp. 022004
Author(s):  
Chunyan Yang ◽  
Yun Hao ◽  
Yangping Li ◽  
Bozhe Wang ◽  
Hai Yuan ◽  
...  
Keyword(s):  
Aluminum Nitride ◽  
Laser Beam ◽  
Processing Quality ◽  
Beam Focusing ◽  
Micro Holes

Allocating nodes to hubs for minimizing the hubs processing resources: A case study

2019 ◽  
Vol 53 (3) ◽  
pp. 807-827
Author(s):  
Ali Balma ◽  
Mehdi Mrad
Keyword(s):  
Telecommunication Network ◽  
Real Life ◽  
Optimal Solutions ◽  
Total Flow ◽  
Nonlinear Formulation ◽  
Large Size ◽  
Processing Resources ◽  
Reformulation Linearization

This paper addresses the problem of allocating the terminal nodes to the hub nodes in a telecommunication network. Since the flow processing induces some undesirable delay, the objective is to minimize the total flow processed by the hubs. This study focuses on a real life network of the tunisian operator Tunisie Telecom whose operations managers are concerned by the quality of service. We provide three compact formulations that give optimal solutions for networks of large size. In particular, the last two are obtained by applying the Reformulation-Linearization Technique to a nonlinear formulation of the problem. The latter formulation derived within this approach is the most computationally effective, as pointed out by the computational experiments conducted on the real life network of Tunisie Telecom with 110 nodes and 5 hubs. Finally, we discuss and compare between the single allocation and double allocation configurations.

Research on trajectory planning of non-developable surface for automated tape placement processing of composite

2017 ◽  
Vol 24 (6) ◽  
pp. 929-936
Author(s):  
Lin Liu ◽  
Jun Xiao ◽  
Yong Li
Keyword(s):  
Trajectory Planning ◽  
Local Stress ◽  
Developable Surface ◽  
Software Environment ◽  
Quantitative Characterization ◽  
Large Size ◽  
Variable Step ◽  
The Cost ◽  
Wing Panel

AbstractTape placement manufacturing process, as one of the automated forming technologies for composite material, not only substantially improves the productivity of composite component and reduces the cost of production significantly but also raises the reliability and stability of composite structure. Automated tape placement technology is mainly applied for manufacturing the fuselage and wing panel of airplane characterized by small curvature and large size. For these kinds of structural components with a non-developable surface, trajectory planning by “natural path” method could reduce the internal stress and improve the quality of composite products to a certain extent but not be optimized by quantitative characterization. On the basis of preliminary work, the theoretical model of “unnatural degree” (UD) is introduced in the first step, which could characterize the tensile and shear strain of the laying tape quantitatively. Secondly, by adjusting the iterative step and laying direction to diminish the UD, local stress could be softened in order to optimize the laying track. Ultimately, the simulation model of the non-developable surface is established under the Matlab software environment, and the “variable step-angle” algorithm is adopted to verify the adjustment effect of the tape-laying track.

Research and Application on Screen Soft Proofing Technology in Printing Quality Control

2012 ◽  
Vol 262 ◽  
pp. 263-268
Author(s):  
Zhan Jun Si ◽  
Jia Wang ◽  
Chong Gu
Keyword(s):  
Quality Control ◽  
Good Effect ◽  
Color Management ◽  
Actual Situation ◽  
Testing Scheme ◽  
Printing Quality ◽  
Display Technology ◽  
Soft Proofing ◽  
Display Performance

In recent years, screen soft proofing has matured with the development of color management and display technology, and it has become the direction of printing development and the key of promotion. This article aimed at raising a testing scheme of display performance and adjusting scheme of corresponding display parameters, on this account to test the professional display’s performance, adjust display parameters and make color management. At the same time with reflecting the actual situation of display, a stable and accurate color reproduction environment was provided for screen soft proofing. After that, evaluations were carried out to evaluate printing quality of screen soft proofing on the condition that display’s performance was good, consequently the differences between proofing effects and final printing were studied. The result shows that this testing scheme of display performance can reflect the truth of display which is tested in this paper, the display after adjusted and color management according to this scheme shows good effect in the ability of screen analog proofing original, it can approach the requirements of the printing proofing.

EXPERIENCE OF PLANTING LARGE SIZE CONIFEROUS WOODY SPECIES IN THE SPRING-SUMMER PERIOD ON THE KOLA NORTH

2021 ◽  
Vol 21 (3) ◽  
pp. 57-70
Author(s):  
E.A. Svyatkovskaya ◽  
◽  
N.V. Saltan ◽  
E.P. Rybalka ◽  
N.N. Trostenyuk ◽  
...  
Keyword(s):  
Root System ◽  
Picea Glauca ◽  
Polar Region ◽  
Woody Species ◽  
Larix Sibirica ◽  
Morphometric Parameters ◽  
Summer Period ◽  
Large Size ◽  
Urban Conditions

The first experience of transplanting large-sized coniferous dendrointroducents (Picea glauca (Moench) Voss, Larix sibirica Ledeb.) in the spring-summer period without preliminary prepara-tion of the root system in the urban conditions of the Polar region was presented. Four specimens of middle-aged plants of both species were selected. The transplant was carried out with the max-imum use of mechanized equipment, which ensures good preservation of the lump and the tree it-self. There were four mutually related stages of work (preparatory, digging out plants, transporta-tion, planting), the quality of which depends on the success of plant survival. A brief description of the decorative qualities, morphometric parameters and the state of the experimental plants has been given. It has shown that due to the peculiarities of the soil and the location of the root system in coniferous introduced species, a clod of earth should be at least 60 cm thick, with a diameter of 110 to 130 cm. The main agrotechnical methods for the creation and care of plantings from large-sized plants were given.

Crystal Structure of Wheat Glutaredoxin and Its Application in Improving the Processing Quality of Flour

2018 ◽  
Vol 66 (45) ◽  
pp. 12079-12087 ◽  
Author(s):  
Xiaomei Sun ◽  
Meirong Chen ◽  
Feng Jia ◽  
Yi Hou ◽  
Song-Qing Hu
Keyword(s):  
Crystal Structure ◽  
Processing Quality
Sign in / Sign up

Export Citation Format

Share Document