scholarly journals Design of Intelligent Parking Control System

2021 ◽  
Vol 2113 (1) ◽  
pp. 012019
Author(s):  
Chunhong He ◽  
Hongchao Li ◽  
Bin Ren

Abstract Along with the historical process of the industrial revolution, the automobile has undoubtedly made life more convenient. But at the same time, various problems also come along: Traffic jams are becoming more and more serious, and problems such as parking are becoming urgent problems. This design uses STC89C52 microcontroller, through the infrared sensor module to detect the information of the garage, then the nRF24L01 wireless module is used to carry out the wireless transmission of master and slave information. Finally, the LCD1602 LCD screen is used to establish the human-computer interaction page, and an intelligent parking space management system is designed. The owners can easily check the parking lot to understand the flow of the parking lot through the system, and judge whether to enter the parking lot, saving time. At the same time, it is easier to integrate with other intelligent systems, which provides a foundation for more advanced management and is the premise for making the parking lot a highly intelligent product in the future.

1998 ◽  
Vol 15 (2) ◽  
pp. 25-45 ◽  
Author(s):  
Fida Mohammad

In this article I shall compare and contrast Ibn Khaldun’s ideas aboutsociohistorical change with those of Hegel, Marx, and Durkheim. I willdiscuss and elaborate Ibn Khaldun’s major ideas about historical andsocial change and compare them with three important figures of modemWestern sociology and philosophy.On reading Ibn Khaldun one should remember that he was living in thefourteenth century and did not have the privilege of witnessing the socialdislocation created by the industrial revolution. It is also very difficult tocategorize Ibn Khaldun within a single philosophical tradition. He is arationalist as well as an empiricist, a historicist as well as a believer inhuman agency in the historical process. One can see many “modem”themes in his thinking, although he lived a hundred years beforeMachiavelli.Lauer, who considers Ibn Khaldun the pioneer of modem sociologicalthought, has summarized the main points of his philosophy.’ In his interpretationof Ibn Khaldun, he notes that historical processes follow a regularpattern. However, whereas this pattern shows sufficient regularity, itis not as rigid as it is in the natural world. In this regard the position ofIbn Khaldun is radically different from those philosophies of history thatposit an immutable course of history determined by the will of divineprovidence or other forces. Ibn Khaldun believes that the individual isneither a completely passive recipient nor a full agent of the historicalprocess. Social laws can be discovered through observation and datagathering, and this empirical grounding of social knowledge represents adeparture from traditional rational and metaphysical thinking ...


2016 ◽  
Vol 12 (06) ◽  
pp. 20 ◽  
Author(s):  
Li Hua ◽  
Xu Da ◽  
Fuquan Zhao

For the sake of overcoming the shortcoming of some equipment such as complex wiring and much measurement parameter, a wireless state monitoring system is developed based on Zigbee, which was composed of upper monitor control PC, wireless gateway CC2530, sensor node CC2530 and sensor module. By studying the characteristic of the equipment, wireless sensor network of a center controller and six wireless sensor node was made up. Then the nod hardware circuit were designed, the wireless module software was programmed by C language, and furthermore, the user interface software was developed based on LabVIEW. The test is done to show that the system can meet state monitoring requirements for some equipment.


Machines ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 42 ◽  
Author(s):  
Zandra B. Rivera ◽  
Marco C. De Simone ◽  
Domenico Guida

The fusion of different technologies is the base of the fourth industrial revolution. Companies are encouraged to integrate new tools in their production processes in order to improve working conditions and increase productivity and production quality. The integration between information, communication technologies and industrial automation can create highly flexible production models for products and services that can be customized through real-time interactions between consumer, production and machinery throughout the production process. The future of production, therefore, depends on increasingly intelligent machinery through the use of digital systems. The key elements for future integrated devices are intelligent systems and machines, based on human–machine interaction and information sharing. To do so, the implementation of shared languages that allow different systems to dialogue in a simple way is necessary. In this perspective, the use of advanced prototyping tools like Open-Source programming systems, the development of more detailed multibody models through the use of CAD software and the use of self-learning techniques will allow for developing a new class of machines capable of revolutionizing our companies. The purpose of this paper is to present a waypoint navigation activity of a custom Wheeled Mobile Robot (WMR) in an available simulated 3D indoor environment by using the Gazebo simulator. Gazebo was developed in 2002 at the University of Southern California. The idea was to create a high-fidelity simulator that gave the possibility to simulate robots in outdoor environments under various conditions. In particular, we wanted to test the high-performance physics Open Dynamics Engine (ODE) and the sensors feature present in Gazebo for prototype development activities. This choice was made for the possibility of emulating not only the system under analysis, but also the world in which the robot will operate. Furthermore, the integration tools available with Solidworks and Matlab-Simulink, well known commercial platforms of modelling and robotics control respectively, are also explored.


2014 ◽  
Vol 543-547 ◽  
pp. 1579-1582 ◽  
Author(s):  
Guo Fang Liu ◽  
Wang Lin Yu

Given the issue that most of the parking lot intellectualized degree and management level is relatively low, this paper focuses on the function design based on Zigbee wireless sensor network, puts forward an intelligent parking lot management system based on Internet of things. This system mainly adopted CC2530 chip as the core of the Zigbee information processing unit to realize the short distance, low power wireless transmission. The intelligent parking lot management system this paper introduced can detect in individual's use of the parking space in the parking lot, and the number of vehicles in the parking lot.


2014 ◽  
Vol 538 ◽  
pp. 494-497
Author(s):  
Yu Ru Wang ◽  
Ping Li ◽  
Zhen Ping Lan ◽  
Dong Ming Lei

This paper presents a system design of intelligent bus wireless transmission module based on STM32F207, and introduced the functional of each modules of the system. And how the system modules work on hardware and software and interfaces key technical is introduced in detail.


2014 ◽  
Vol 530-531 ◽  
pp. 75-78
Author(s):  
Xin Gao ◽  
Piotr Mackowiak ◽  
Biswajit Mukhopadhyay ◽  
Oswin Ehrmann ◽  
Klaus Dieter Lang ◽  
...  

This system consists of a pressure silicon sensor, calibration module and wireless module. The pressure sensor used in this work is a piezoresistive silicon sensor that developed by Technical University Berlin. After calibration of the sensors output signals, the XBee-chip was used for wireless transmission. The three components with peripheral circuits and batteries were integrated in a 50mm × 50mm PCB. The system was then tested in a climate chamber at different temperatures and pressures. Programs for signal receiving and processing were developed in Matlab-environment. The experimental results show that this system works well for the short range (15m indoor).


2013 ◽  
Vol 397-400 ◽  
pp. 1918-1922
Author(s):  
Li Mei Wen

In the technology of temperature measurement, the sensor is an important part of system. But with the increase of the number of sensors, it will undoubtedly bring with a lot of data cable. Compared with wired communication technology, wireless communications technology has the advantages of low cost, simple structures, low impact of environment. So the wireless communication technology meeting with the requirements of data communications has become a more practical, fast and efficient way. This paper describes a multi-channel temperature monitoring system using nRF905 wireless transmission module, STC89C52RC MCU and DS18B20 temperature sensor as core. Functions such as sampling, analysis, display, alarm and others can be done automatically by the system, dates transmitted by wireless module, and the system can realize the function of real-time monitoring of temperature.


Respati ◽  
2019 ◽  
Vol 14 (2) ◽  
Author(s):  
Agus Fatkhurohman ◽  
Eli Pujastuti

 INTISARIPerkembangan zaman di era modern ini sudah memasuki era revolusi industri 4.0, dimana segala aspek sudah bergantung pada sebuah teknologi. Dimana bentuk teknologi ini sudah bergerak secara otomatis dan saling terhubung dengan jaringan internet. Teknologi yang digunakan sudah bergerak otomatis dan sudah banyak yang menggunakan sebuah system cerdas. Berbicara mengenai jaringan internet dan system cerdas, maka keterkaitan dengan sebuah data yang digunakan akan semakin besar bahkan bisa sampai tergolong data dengan kategori big data. Yang mana tempat penyimpanan data juga harus disesuaikan dengan kebutuhan datanya. Selain dengan kebutuhan data yang semakin besar di era revolusi industry ini yang selalu dikaitkan dengan jaringan internet maka keamanan sebuah data juga perlu dipertanyakan. Secara tidak langsung keamanan data juga bisa menjadi masalah besar. Dengan jaringan internet setiap orang di setiap dunia bisa mengakses sebuah data yang terkoneksi dengan jaringan internet. Tidak asing lagi sekarang sudah banyak kasus pencurian data karena terhubung dengan jaringan internet. Kasus pencurian data ini sering memanfaatkan website sebagai sarana untuk mencuri datanya yang sering disebut dengan istilah website phising. Phishing masih menjadi vektor serangan teratas yang memberi akses ke penyerang untuk membuka informasi pribadi seperti kredensial login dan nomor kartu kredit. Pada 2017 lalu, Indonesia menempati urutan ke-9 jumlah serangan phising yakni satu phishing insiden per 2.380 email. Laporan terbaru F5 yang bertajuk menyebutkan, insiden penipuan (fraud) pada Oktober, November, dan Desember melonjak 50% dari rata-rata tahunan. Berpura-pura menjadi seseorang atau entitas yang terkenal adalah taktik utama. Sebanyak 71% serangan phishing pada periode 1 september – 31 Oktober 2018 menggunakan modus mengaku dari perusahaan terkenal, khususnya di industri teknologi.Kata kunci :  jaringan, internet, sistem cerdas, website phising, serangan. ABSTRACT        The development of the era in this modern era has entered the era of industrial revolution 4.0, where all aspects have depended on a technology. Where this form of technology has moved automatically and interconnected with internet networks. The technology used has moved automatically and many have used an intelligent system. Talking about the internet network and intelligent systems, the linkages with the data used will be even greater and can even be classified as data with the big data category. Which is where the data storage must also be adjusted to the data requirements. In addition to the increasing data requirements in the industrial revolution era which are always associated with the internet network, the security of a data also needs to be questioned. Indirectly data security can also be a big problem. With the internet network everyone in every world can access a data that is connected to the internet network. No stranger now there are many cases of data theft because it is connected to the internet network. This data theft case often uses websites as a means to steal data which is often referred to as phishing websites.        Phishing is still the top attack vector that gives attackers access to private information such as login credentials and credit card numbers. In 2017, Indonesia ranked 9th in the number of phishing attacks, one phishing incident per 2,380 emails. The latest F5 report entitled, fraud in October, November and December increased by 50% from the annual average. Pretending to be someone or a famous entity is the main tactic. As many as 71% of phishing attacks in the period 1 September - 31 October 2018 use the mode claimed to be from a well-known company, especially in the technology industry.Keywords: network, internet, intelligents systems, website phishing, attack.


Author(s):  
Dicky Nofriansyah ◽  
Ganefri Ganefri ◽  
Ridwan Ridwan

This research focused on the development a new learning model in Vocational Education to answer the challenges of this Industrial Revolution 4.0 era. The problem identified was the lack of learning outcomes, especially subjects oriented to software engineering for information systems students in particular and other computer science seen in the phenomenon of the inability of students to produce intelligent systems. From a series of validity, practicality, and effectiveness test results, use content validity with Aiken'V and construct validity with CFA (Confirmatory Factor Analysis) states that the model resulting from this study is stated, valid, practical and effective. This study also produced a new learning model with five syntaxes, namely (1) Define Problem and Design a Plan Project, (2) Interaction with Support System, (3) Create a Project, (4) Keep control and Monitoring Project, (4) Yield and Assessment of Project. And based on the test of the validity of the syntax of this model stated goodness-of-fit or valid.


Sign in / Sign up

Export Citation Format

Share Document