scholarly journals Explorations of A Real-Time VR Emotion Prediction System Using Wearable Brain-Computer Interfacing

2021 ◽  
Vol 2129 (1) ◽  
pp. 012064
Author(s):  
Nazmi Sofian Suhaimi ◽  
James Mountstephens ◽  
Jason Teo

Abstract The following research describes the potential of using a four-class emotion classification using a four-channel wearable EEG headset combined with VR for evoking emotions from each individual. Multiple researchers have conducted and established emotion recognition by using a 2-D monitor screen for stimulus responses but this introduces artifacts such as the lack of concentration on-screen or external noise disturbance and the bulky and cumbersome wires on an EEG device were difficult and time-consuming to set up thus restricting to only the trained professionals to operate this complex and sensitive medical equipment. Therefore, using a small and portable EEG headset where it was accessible for consumers was used for the brainwave signal collection. The wearable EEG headset collects the brainwave samples at 256Hz at specific locations of the brain (Tp9, Tp10, AF7, AF8) and samples were transformed via FFT to obtain the five bands (Delta, Theta, Alpha, Beta, Gamma) and were classified using random forest classifier. An emotion prediction system was then developed and the trained model was used to benchmark the 4-class emotion prediction accuracy from each individual using a 4-channel low-cost EEG headset. Subsequently, a real-time prediction system was implemented and tested. Early findings showed that it could achieve predictions as high as 76.50% for intra-subject classification results.

2018 ◽  
Author(s):  
Alessio Paolo Buccino ◽  
Mikkel Elle Lepperød ◽  
Svenn-Arne Dragly ◽  
Philipp Häfliger ◽  
Marianne Fyhn ◽  
...  

AbstractObjectiveA major goal in systems neuroscience is to determine the causal relationship between neural activity and behavior. To this end, methods that combine monitoring neural activity, behavioral tracking, and targeted manipulation of neurons in closed-loop are powerful tools. However, commercial systems that allow these types of experiments are usually expensive and rely on non-standardized data formats and proprietary software which may hinder user-modifications for specific needs. In order to promote reproducibility and data-sharing in science, transparent software and standardized data formats are an advantage. Here, we present an open source, low-cost, adaptable, and easy to set-up system for combined behavioral tracking, electrophysiology and closed-loop stimulation.ApproachBased on the Open Ephys system (www.open-ephys.org) we developed multiple modules to include real-time tracking and behavior-based closed-loop stimulation. We describe the equipment and provide a step-by-step guide to set up the system. Combining the open source software Bonsai (bonsai-rx.org) for analyzing camera images in real time with the newly developed modules in Open Ephys, we acquire position information, visualize tracking, and perform tracking-based closed-loop stimulation experiments. To analyze the acquired data we provide an open source file reading package in Python.Main resultsThe system robustly visualizes real-time tracking and reliably recovers tracking information recorded from a range of sampling frequencies (30-1000Hz). We combined electrophysiology with the newly-developed tracking modules in Open Ephys to record place cell and grid cell activity in the hippocampus and in the medial entorhinal cortex, respectively. Moreover, we present a case in which we used the system for closed-loop optogenetic stimulation of entorhinal grid cells.SignificanceExpanding the Open Ephys system to include animal tracking and behavior-based closed-loop stimulation extends the availability of high-quality, low-cost experimental setup within standardized data formats serving the neuroscience community.


Author(s):  
Hemant Kumar Gianey ◽  
Mumtaz Ali ◽  
V. Vijayakumar ◽  
Ashutosh Sharma ◽  
Rajiv Kumar

Accuracy and total design and implementation cost of the GPS framework determine the viability of GPS based projects. As the greater part of the advanced framework including telemetry, IoT, Cloud, and AUTOSAR frameworks use GPS to get exact outcomes, finding a software-controlled error correction becomes important. With the execution of open source library such as RTKLIB will help in controlling and revising GPS blunders. The project utilizes the RTKLIB along with two stations for better accuracy. The RTK-GPS framework works under Linux environment, which is embedded in the Beagleboard. The communication between the GPS system is set up utilizing both serial communication protocol and TCP/IP suite. To get high precision inside the network, two GPS modules are utilized. One of them will be mounted on the rover and another GPS is the base station of the setup. Both the GPS will have a double radio wire setup to increase the reception level to reduce the noise and get centimeter-level precision. For long-range communication, Rover utilizes Wi-Fi with TCP/IP stack protocol. In this research paper, setup is intended to accomplish the centimeter level precision through libraries in a Linux environment. The design will be set up and tried on a college campus under various conditions with different error parameters to acquire a low cost and centimeter level GPS accuracy.


Biosensors ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 157
Author(s):  
Daniela Vieira ◽  
Francis McEachern ◽  
Romina Filippelli ◽  
Evan Dimentberg ◽  
Edward J Harvey ◽  
...  

A variety of brain disorders such as neural injury, brain dysfunction, vascular malformation, and neurodegenerative diseases are associated with abnormal levels of oxygen. Current methods to directly monitor tissue oxygenation in the brain are expensive and invasive, suffering from a lack of accuracy. Electrochemical detection has been used as an invasiveness and cost-effectiveness method, minimizing pain, discomfort, and injury to the patient. In this work, we developed a minimally invasive needle-sensor with a high surface area to monitor O2 levels in the brain using acupuncture needles. The approach was to directly etch the iron from stainless steel acupuncture needles via a controlled pitting corrosion process, obtaining a high microporous surface area. In order to increase the conductivity and selectivity, we designed and applied for the first time a low-cost coating process using non-toxic chemicals to deposit high surface area carbon nanoparticle, catalytically active laccase, and biocompatible polypyrrole. The physicochemical properties of the materials were characterized as well as their efficacy and viability as probes for the electrochemical detection of PO2. Our modified needles exhibited efficient electrocatalysis and high selectivity toward O2, with excellent repeatability. We well engineered a small diagnostic tool to monitor PO2, minimally invasive, able to monitor real-time O2 in vivo complex environments.


2020 ◽  
Vol 10 (19) ◽  
pp. 6791
Author(s):  
Jaehak Yu ◽  
Sejin Park ◽  
Soon-Hyun Kwon ◽  
Chee Meng Benjamin Ho ◽  
Cheol-Sig Pyo ◽  
...  

Stroke is a leading cause of disabilities in adults and the elderly which can result in numerous social or economic difficulties. If left untreated, stroke can lead to death. In most cases, patients with stroke have been observed to have abnormal bio-signals (i.e., ECG). Therefore, if individuals are monitored and have their bio-signals measured and accurately assessed in real-time, they can receive appropriate treatment quickly. However, most diagnosis and prediction systems for stroke are image analysis tools such as CT or MRI, which are expensive and difficult to use for real-time diagnosis. In this paper, we developed a stroke prediction system that detects stroke using real-time bio-signals with artificial intelligence (AI). Both machine learning (Random Forest) and deep learning (Long Short-Term Memory) algorithms were used in our system. EMG (Electromyography) bio-signals were collected in real time from thighs and calves, after which the important features were extracted, and prediction models were developed based on everyday activities. Prediction accuracies of 90.38% for Random Forest and of 98.958% for LSTM were obtained for our proposed system. This system can be considered an alternative, low-cost, real-time diagnosis system that can obtain accurate stroke prediction and can potentially be used for other diseases such as heart disease.


2011 ◽  
Vol 6 ◽  
pp. 62-73 ◽  
Author(s):  
E. D’Annibale

This research deals with an efficient and low cost methodology to obtain a metric and photorealstic survey of a complex architecture. Photomodeling is an already tested interactive approach to produce a detailed and quick 3D model reconstruction. Photomodeling goes along with the creation of a rough surface over which oriented images can be back-projected in real time. Lastly the model can be enhanced checking the coincidence between the surface and the projected texture. The challenge of this research is to combine the advantages of two technologies already set up and used in many projects: spherical photogrammetry (Fangi, 2007,2008,2009,2010) and structure for motion (Photosynth web service and Bundler + CMVS2 + PMVS2). The input images are taken from the same points of view to form the set of panoramic photos paying attention to use well-suited projections: equirectangular for spherical photogrammetry and rectilinear for Photosynth web service. The performance of the spherical photogrammetry is already known in terms of its metric accuracy and acquisition quickness but time is required in the restitution step because of the manual homologous point recognition from different panoramas. In Photosynth instead the restitution is quick and automated: the provided point clouds are useful benchmarks to start with the model reconstruction even if lacking in details and scale. The proposed workflow needs of ad-hoc tools to capture high resolution rectilinear panoramic images and visualize Photosynth point clouds and orientation camera parameters. All of them are developed in VVVV programming environment. 3DStudio Max environment is then chosen because of its performance in terms of interactive modeling, UV mapping parameters handling and real time visualization of projected texture on the model surface. Experimental results show how is possible to obtain a 3D photorealistic model using the scale of the spherical photogrammetry restitution to orient web provided point clouds. Moreover the proposed research highlights how is possible to speed up the model reconstruction without losing metric and photometric accuracy. In the same time, using the same panorama dataset, it picks out a useful chance to compare the orientations coming from the two mentioned technologies (Spherical Photogrammetry and Structure for Motion).


1997 ◽  
Vol 503 ◽  
Author(s):  
B. K. Diefenderfer ◽  
I. L. Al-Qadi ◽  
J. J. Yoho ◽  
S. M. Riad ◽  
A. Loulizi

ABSTRACTPortland cement concrete (PCC) structures deteriorate with age and need to be maintained or replaced. Early detection of deterioration in PCC (e.g., alkali-silica reaction, freeze/thaw damage, or chloride presence) can lead to significant reductions in maintenance costs. However, it is often too late to perform low-cost preventative maintenance by the time deterioration becomes evident. By developing techniques that would enable civil engineers to evaluate PCC structures and detect deterioration at early stages (without causing further damage), optimization of life-cycle costs of the constructed facility and minimization of disturbance to the facility users can be achieved.Nondestructive evaluation (NDE) methods are potentially one of the most useful techniques ever developed for assessing constructed facilities. They are noninvasive and can be performed rapidly. Portland cement concrete can be nondestructively evaluated by electrically characterizing its complex dielectric constant. The real part of the dielectric constant depicts the velocity of electromagnetic waves in PCC. The imaginary part, termed the “loss factor,” describes the conductivity of PCC and the attenuation of electromagnetic waves.Dielectric properties of PCC have been investigated in a laboratory setting using a parallel plate capacitor operating in the frequency range of 0.1 to 40.1MIHz. This capacitor set-up consists of two horizontal-parallel plates with an adjustable separation for insertion of a dielectric specimen (PCC). While useful in research, this approach is not practical for field implementation. A new capacitor probe has been developed which consists of two plates, located within the same horizontal plane, for placement upon the specimen to be tested. Preliminary results show that this technique is feasible and results are promising; further testing and evaluation is currently underway.


Author(s):  
Gabriel de Almeida Souza ◽  
Larissa Barbosa ◽  
Glênio Ramalho ◽  
Alexandre Zuquete Guarato

Author(s):  
Binh Nguyen

Abstract For those attempting fault isolation on computer motherboard power-ground short issues, the optimal technique should utilize existing test equipment available in the debug facility, requiring no specialty equipment as well as needing a minimum of training to use effectively. The test apparatus should be both easy to set up and easy to use. This article describes the signal injection and oscilloscope technique which meets the above requirements. The signal injection and oscilloscope technique is based on the application of Ohm's law in a short-circuit condition. Two experiments were conducted to prove the effectiveness of these techniques. Both experiments simulate a short-circuit condition on the VCC3 power rail of a good working PC motherboard and then apply the signal injection and oscilloscope technique to localize the short. The technique described is a simple, low cost and non-destructive method that helps to find the location of the power-ground short quickly and effectively.


Author(s):  
Arjan Mels ◽  
Frank Zachariasse

Abstract Although RIL, SDL and LADA are slightly different, the main operating principle is the same and the theory for defect localization presented in this paper is applicable to all three methods. Throughout this paper the authors refer to LADA, as all experimental results in this paper were obtained with a 1064nm laser on defect free circuits. This paper first defines mathematically what 'signal strength' actually means in LADA and then demonstrates a statistical model of the LADA situation that explains the optimal conditions for signal collection and the parameters involved. The model is tested against experimental data and is also used to optimise the acquisition time. Through this model, equations were derived for the acquisition time needed to discern a LADA response from the background noise. The model offers a quantitative tool to estimate the feasibility of a given LADA measurement and a guide to optimising the required experimental set-up.


2019 ◽  
pp. 60-66
Author(s):  
Viet Quynh Tram Ngo ◽  
Thi Ti Na Nguyen ◽  
Hoang Bach Nguyen ◽  
Thi Tuyet Ngoc Tran ◽  
Thi Nam Lien Nguyen ◽  
...  

Introduction: Bacterial meningitis is an acute central nervous infection with high mortality or permanent neurological sequelae if remained undiagnosed. However, traditional diagnostic methods for bacterial meningitis pose challenge in prompt and precise identification of causative agents. Aims: The present study will therefore aim to set up in-house PCR assays for diagnosis of six pathogens causing the disease including H. influenzae type b, S. pneumoniae, N. meningitidis, S. suis serotype 2, E. coli and S. aureus. Methods: inhouse PCR assays for detecting six above-mentioned bacteria were optimized after specific pairs of primers and probes collected from the reliable literature resources and then were performed for cerebrospinal fluid (CSF) samples from patients with suspected meningitis in Hue Hospitals. Results: The set of four PCR assays was developed including a multiplex real-time PCR for S. suis serotype 2, H. influenzae type b and N. meningitides; three monoplex real-time PCRs for E. coli, S. aureus and S. pneumoniae. Application of the in-house PCRs for 116 CSF samples, the results indicated that 48 (39.7%) cases were positive with S. suis serotype 2; one case was positive with H. influenzae type b; 4 cases were positive with E. coli; pneumococcal meningitis were 19 (16.4%) cases, meningitis with S. aureus and N. meningitidis were not observed in any CSF samples in this study. Conclusion: our in-house real-time PCR assays are rapid, sensitive and specific tools for routine diagnosis to detect six mentioned above meningitis etiological agents. Key words: Bacterial meningitis, etiological agents, multiplex real-time PCR


Sign in / Sign up

Export Citation Format

Share Document