scholarly journals Physico-chemical Properties Tests of Palm Oil Based Foaming Agent Using Water Solvent Media from Peatland

Author(s):  
Mira Rivai ◽  
Erliza Hambali ◽  
Ani Suryani ◽  
Gatot Pramuhadi ◽  
Rista Fitria ◽  
...  
2018 ◽  
Vol 1 (1) ◽  
pp. 20-26
Author(s):  
Mursalin Mursalin

Efforts to develop the production technology of high quality red palm-oil (RPO) in order to provide source of food ingredient that naturally rich of nutrients, become urgents regarding the need of such products drastically increased recently. Application of deodorization technology by temperature, time, and deodorizer pressure combinations (engineering of deodorization process) are studied and evaluated to obtain good quality of RPO. Crude palm oil (CPO) used in this research were supplied by PT. Salim Ivomas (Bimoli) Jakarta. The equipments used were degumming and neutralization unit, deodorization unit and other equipment units to analize the oil physico-chemical properties. The research consisted of 5 stages as the following: characterising CPO physico-chemical properties, conducting chemically degumming and deacidification, process enginering of deodorization, characterizing of physico-chemical properties and organoleptic of RPO resulted, and analyzing data for product resulted from process engineering applied. Deodorization with the range of temperature and process duration of 135–145 oC (408–418 K) and 1–4 hours have led to carotene retention decreasing (%) following the equation “Carotene Retention (%) = -764 x ln(absolute temperature) + 4693” and process duration with the equation “Carotene Retention (%) = -7.81 x ln(process duration) + 91.02”; and also resulted odor intensity with the equation “Odor Intensity = 0.08 x (squared absolute temperature) – 66.88 x (absolute temperature) + 13823” and duration process with the equation “Odor Intensity = 0.315 x (squared process duration) – 1.52 x (process duration) + 5.268”. Effective deodorization to produce RPO with the content of free fatty acid and peroxide value that met the requirements of Indonesian National Standard (SNI) quality of carotene content above 400 ppm and odor scale below 3.3, were the combination of temperature (T) of 141.34 oC, heat process duration (t) of 2.35 hours and vacuum pressure of (P) of 20 mmHg. The resulted RPO contained free fatty acid and peroxide value of 0.11% dan 0.12 meq/kg oil respectively, total carotene of 444.09 ppm and odor value of 3.21  


2018 ◽  
Vol 212 ◽  
pp. 01004
Author(s):  
Pavel Gorbach ◽  
Sergey Shcherbin ◽  
Andrei Savenkov

The paper considers the approach to the selection of the foaming agent and its concentration in the production of non-autoclaved hard cellular concrete, consisting in measuring the basic physico-chemical properties and determining the critical concentration of micelle formation.


2016 ◽  
Vol 2016 ◽  
pp. 1-7
Author(s):  
Bereket Tesfaye ◽  
Alemayehu Abebaw

The physico-chemical properties and level of some essential metals of four edible oils, two imported (Viking and Avena) and two processed in Ethiopia (Selam and Nur) oil samples, were analyzed using classical wet chemical method and flame atomic absorption spectroscopy techniques, respectively. The result of physico-chemical properties shows that acid value in Avena and Viking oils which is 0.091±0.0042 mgKOH/g and 0.082±0.0047 mgKOH/g, respectively, from palm oil variety and in Selam and Nur oils 0.276±0.0056 mgKOH/g and 0.188±0.0050 mgKOH/g, respectively, from noug oil variety, saponification value in Avena and Viking oils which is 190.27±3.528 mgKOH/g and 189.80±3.528 mgKOH/g, respectively, and in Selam and Nur oils 187.00±5.668 mgKOH/g and 143.05±8.527 mgKOH/g, respectively, iodine value in Viking and Avena oils which is 97.545±0.6345 g and 53.807±1.0150 g, respectively, and Nur and Selam oils 116.410±0.3863 g and 88.153±0.5300 g, respectively, and peroxide value in Viking and Avena oils which is 1.413±0.0808 meq/kg and 1.233±0.0305 meq/kg, respectively, from palm oil variety and in Selam and Nur oils 0.893±0.0503 meq/kg and 1.460±0.0600 meq/kg, respectively, from noug oil variety were obtained. The level of essential metals in edible oil samples was analyzed after wet digestion. The results show that levels of Cu in Viking and Avena oils that were 0.62±0.022 mg and 0.28±0.004 mg, respectively, and in Selam and Nur oils 0.86±0.003 mg and 0.42±0.005 mg, respectively, and the levels of Zn in Viking and Avena oils that were 1.58±0.154 mg and 1.27±0.255 mg, respectively, and in Selam and Nur oils 1.19±0.160 mg and 1.47±0.567 mg, respectively, were obtained. The physico-chemical properties and level of essential metal revealed that four edible oils were acceptable to human consumption.


Author(s):  
Katarynna Santos de Araújo ◽  
Sérvulo Mercier Siqueira e Silva ◽  
Leonardo Devilles dos Santos ◽  
Carolina Barbosa Malafaia ◽  
Mariana Oliveira Barbosa

The palm oil (Elaeis guineensis Jacq.) is widely produced in the Brazilian Amazon region; however, the expansion of its cultivation to other environments is mandatory to attend the increasing demand of the industry, especially in the food and biodiesel fields. This study aimed to analyze the lipid profile and physicochemical characteristics of crude palm oil obtained from different palm genotypes cultivated in Goiana-PE, Northeast of Brazil. All genotypes showed high oil yield (> 60%). Lipid profile showed that the palmitic and linoleic acids were predominant in the oil (about 80%). Iodine and saponification index ranged from 50.2 to 55.3g I2.100 g-1 and 184.3 to 185.4 mg KOH.g-1 of oil, respectively. Saponification and iodine levels also showed similar values among the studied genotypes. Acid and peroxide indexes presented values within the National Health Surveillance Agency (ANVISA). BRS C7201 genotype presented more attractive and viable results for its cultivation and development in the studied area.


Author(s):  
H. Gross ◽  
H. Moor

Fracturing under ultrahigh vacuum (UHV, p ≤ 10-9 Torr) produces membrane fracture faces devoid of contamination. Such clean surfaces are a prerequisite foe studies of interactions between condensing molecules is possible and surface forces are unequally distributed, the condensate will accumulate at places with high binding forces; crystallites will arise which may be useful a probes for surface sites with specific physico-chemical properties. Specific “decoration” with crystallites can be achieved nby exposing membrane fracture faces to water vopour. A device was developed which enables the production of pure water vapour and the controlled variation of its partial pressure in an UHV freeze-fracture apparatus (Fig.1a). Under vaccum (≤ 10-3 Torr), small container filled with copper-sulfate-pentahydrate is heated with a heating coil, with the temperature controlled by means of a thermocouple. The water of hydration thereby released enters a storage vessel.


Sign in / Sign up

Export Citation Format

Share Document