scholarly journals Tannin-furanic foams used as biomaterial substrates for SERS sensing in possible wastewater filter applications

2021 ◽  
Vol 8 (11) ◽  
pp. 115404
Author(s):  
Gebhard Sabathi ◽  
Andreas Reyer ◽  
Nicola Cefarin ◽  
Thomas Sepperer ◽  
Jonas Eckardt ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Hot Spot ◽  
Surface Enhanced Raman Spectroscopy ◽  
Silver Layer ◽  
Sers Substrate ◽  
Malachite Green Dye ◽  
Relative Standard ◽  
Surface Enhanced Raman ◽  
Potential Applications ◽  
Cost Efficient

Abstract Simple substrates for surface enhanced Raman spectroscopy (SERS), producible in a cost-efficient way, are of growing interest both for scientific and for environmental applications. In this study, we demonstrate the use of three types of bio-based tannin-furanic rigid foams as precursor materials for SERS substrates. Coated with a silver layer, these substrates allowed the detection of several well-known analytes in the mM regime by Raman spectroscopy. Specific optimization of the standard tannin-furanic foam morphology by tuning the chemical synthesis led to a smaller and more homogeneously distributed pore structure, supplying more active hot spot areas. Thus, we obtained a significant increase and a lower relative standard deviation (RSD) of the SERS signal recorded over the mapped SERS substrate area, for several analytes, in particular for Malachite Green dye. This work represents a feasibility study opening several potential applications of this biopolymers in fields such as the detection of water pollutants, virtually combining filtration and SERS capabilities driven by a controlled porosity.

scholarly journals Manipulating the surface-enhanced Raman spectroscopy (SERS) activity and plasmon-driven catalytic efficiency by the control of Ag NP/graphene layers under optical excitation

Nanophotonics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1529-1540
Author(s):  
Xianwu Xiu ◽  
Liping Hou ◽  
Jing Yu ◽  
Shouzhen Jiang ◽  
Chonghui Li ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Hot Spot ◽  
Catalytic Efficiency ◽  
Surface Enhanced Raman Spectroscopy ◽  
In Situ Monitoring ◽  
Excitation Beam ◽  
Graphene Layers ◽  
Cu Film ◽  
Surface Enhanced ◽  
Surface Enhanced Raman

Abstract Highly efficient plasmon-driven catalysis and excellent surface-enhanced Raman spectroscopy (SERS) performance are proportional to the square of the local electromagnetic field (hot spot). However, a proven way to realize the enhancement in intensity and density of “hot spot” still needs to be investigated. Here, we report on multilayered Ag nanoparticle (Ag NP)/graphene coupled to an underlying Cu film system (MAgNP-CuF) which can be used as an effective SERS substrates realizing ultra-sensitive detection for toxic molecules and in situ monitoring the plasmon-driven reaction for p-nitrothiophenol (PNTP) to p,p′-dimercaptobenzene (DMAB) conversion. The mechanism of ultra-sensitive SERS response and catalytic reaction is investigated via Ag NP/graphene layer-dependent experiments combined with theoretical simulations. The research found that the intensity and density of “hot spot” can be effectively manipulated by the number of plasmonic layers, and the bottom Cu film could also reflect the scattered and excitation beam and would further enhance the Raman signals. Moreover, the MAgNP-CuF exhibits outstanding performance in stability and reproducibility. We believe that this concept of multilayered plasmonic structures would be widely used not only in the field of SERS but also in the wider research in photocatalysis.

scholarly journals Design of Inverted Nano-Cone Arrayed SERS Substrate for Rapid Detection of Pathogens

2021 ◽  
Vol 11 (17) ◽  
pp. 8067
Author(s):  
Zixun Jia ◽  
Sarah Asiri ◽  
Asma Elsharif ◽  
Widyan Alamoudi ◽  
Ebtesam Al-Suhaimi ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Rapid Detection ◽  
Close Contact ◽  
Surface Enhanced Raman Spectroscopy ◽  
Sers Substrate ◽  
Label Free ◽  
Surface Enhanced Raman ◽  
Order Of Magnitude ◽  
The Right ◽  
Pathogen Diagnosis

Rapid detection of bacteria is a very critical and important part of infectious disease treatment. Sepsis kills more than 25 percent of its victims, resulting in as many as half of all deaths in hospitals before identifying the pathogen for patients to get the right treatment. Raman spectroscopy is a promising candidate in pathogen diagnosis given its fast and label-free nature, only if the concentration of the pathogen is high enough to provide reasonable sensitivity. This work reports a new design of surface-enhanced Raman spectroscopy (SERS) substrate which will provide high enough sensitivity and fast and close contact of the target structure to the optical hot spots for immunomagnetic capturing-based bacteria-concentrating technique. The substrate uses inverted nanocone structure arrays made of transparent PDMS (Polydimethylsiloxane) to funnel the light from the bottom to the top of the cones where plasmonic gold nanorods are located. A high reflective and low loss layer is deposited on the outer surface of the cone. Given the geometry of cones, photons are multi-reflected by the outer layer and thus the number density of photons at hotspots increases by an order of magnitude, which could be high enough to detect immunomagnetically densified bacteria.

scholarly journals Silver-Nanoparticle-Decorated Gold Nanorod Arrays via Bioinspired Polydopamine Coating as Surface-Enhanced Raman Spectroscopy (SERS) Platforms

Coatings ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 198 ◽  
Author(s):  
Mehmet Yilmaz
Keyword(s):  
Raman Spectroscopy ◽  
Deposition Time ◽  
Surface Enhanced Raman Spectroscopy ◽  
Gold Nanorod ◽  
Nanorod Arrays ◽  
Plasmonic Material ◽  
Relative Standard ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Controlled Deposition

The controlled deposition of nanoparticles onto 3-D nanostructured films is still facing challenges due to the uncontrolled aggregation of colloidal nanoparticles. In the context of this study, a simple yet effective approach is demonstrated to decorate the silver nanoparticles (AgNP) onto the 3-D and anisotropic gold nanorod arrays (GNAs) through a bioinspired polydopamine (PDOP) coating to fabricate surface-enhanced Raman spectroscopy (SERS) platforms. Since the Raman reporter molecules (methylene blue, MB, 10 µM) were not adsorbed directly on the surface of the plasmonic material, a remarkable decrease in SERS signals was detected for the PDOP-coated GNAs (GNA@PDOP) platforms. However, after uniform and well-controlled AgNP decoration on the GNA@PDOP (GNA@PDOP@AgNP), huge enhancement was observed in SERS signals from the resultant platform due to the synergistic action which originated from the interaction of GNAs and AgNPs. I also detected that PDOP deposition time (i.e., PDOP film thickness) is the dominant parameter that determines the SERS activity of the final system and 30 min of PDOP deposition time (i.e., 3 nm of PDOP thickness) is the optimum value to obtain the highest SERS signal. To test the reproducibility of GNA@PDOP@AgNP platforms, relative standard deviation (RSD) values for the characteristic peaks of MB were found to be less than 0.17, demonstrating the acceptable reproducibility all over the proposed platform. This report suggests that GNA@PDOP@AgNP system may be used as a robust platform for practical SERS applications.

scholarly journals Application of Doehlert Matrix for an Optimized Preparation of a Surface-Enhanced Raman Spectroscopy (SERS) Substrate Based on Silicon Nanowires for Ultrasensitive Detection of Rhodamine 6G

2019 ◽  
Vol 74 (2) ◽  
pp. 168-177 ◽  
Author(s):  
Awatef Ouhibi ◽  
Maroua Saadaoui ◽  
Nathalie Lorrain ◽  
Mohammed Guendouz ◽  
Noureddine Raouafi ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Silver Nitrate ◽  
Silicon Nanowires ◽  
Rhodamine 6G ◽  
Surface Enhanced Raman Spectroscopy ◽  
Influential Factor ◽  
Metallic Surface ◽  
Sers Substrate ◽  
Surface Enhanced ◽  
Surface Enhanced Raman

In this work, we combined a hierarchical nano-array effect of silicon nanowires (SiNWs) with a metallic surface of silver nanoparticles (AgNPs) to design a surface-enhanced Raman spectroscopy (SERS) scattering substrate for sensitive detection of Rhodamine 6G (R6G) which is a typical dye for fluorescence probes. The SiNWs were prepared by Metal-Assisted Chemical Etching (MACE) of n-Si (100) wafers. The Doehlert design methodology was used for planning the experiment and analyzing the experimental results. Thanks to this methodology, the R6G SERS response has been optimized by studying the effects of the silver nitrate concentration, silver nitrate and R6G immersion times and their interactions. The immersion time in R6G solution stands out as the most of influential factor on the SERS response.

scholarly journals Porous carbon nanowire array for surface-enhanced Raman spectroscopy

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Nan Chen ◽  
Ting-Hui Xiao ◽  
Zhenyi Luo ◽  
Yasutaka Kitahama ◽  
Kotaro Hiramatsu ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Porous Carbon ◽  
Hot Spots ◽  
Strong Dependence ◽  
Nanowire Array ◽  
Surface Enhanced Raman Spectroscopy ◽  
Localized Surface Plasmon ◽  
Sers Substrate ◽  
Surface Enhanced ◽  
Surface Enhanced Raman

Abstract Surface-enhanced Raman spectroscopy (SERS) is a powerful tool for vibrational spectroscopy as it provides several orders of magnitude higher sensitivity than inherently weak spontaneous Raman scattering by exciting localized surface plasmon resonance (LSPR) on metal substrates. However, SERS can be unreliable for biomedical use since it sacrifices reproducibility, uniformity, biocompatibility, and durability due to its strong dependence on “hot spots”, large photothermal heat generation, and easy oxidization. Here, we demonstrate the design, fabrication, and use of a metal-free (i.e., LSPR-free), topologically tailored nanostructure composed of porous carbon nanowires in an array as a SERS substrate to overcome all these problems. Specifically, it offers not only high signal enhancement (~106) due to its strong broadband charge-transfer resonance, but also extraordinarily high reproducibility due to the absence of hot spots, high durability due to no oxidization, and high compatibility to biomolecules due to its fluorescence quenching capability.

Surface-enhanced Raman spectroscopy (SERS) for detection of VX and HD in the gas phase using a hand-held Raman spectrometer

The Analyst ◽  
2020 ◽  
Vol 145 (19) ◽  
pp. 6334-6341 ◽  
Author(s):  
Vered Heleg-Shabtai ◽  
Hagai Sharabi ◽  
Amalia Zaltsman ◽  
Izhar Ron ◽  
Alexander Pevzner
Keyword(s):  
Raman Spectroscopy ◽  
Gas Phase ◽  
Surface Enhanced Raman Spectroscopy ◽  
Sers Substrate ◽  
Raman Spectrometer ◽  
Surface Enhanced ◽  
Surface Enhanced Raman

A sensitive surface-enhanced Raman spectroscopy (SERS) substrate was developed to enable hand-held Raman spectrometers to detect gas-phase VX and HD.

scholarly journals Highly Sensitive Surface Enhanced Raman Spectroscopy from Ag Nanoparticles Decorated Graphene Sheet

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Hui Song ◽  
Xin Li ◽  
Sweejiang Yoo ◽  
Yuan Wu ◽  
Weihua Liu ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Size Distribution ◽  
Ag Nanoparticles ◽  
Surface Enhanced Raman Spectroscopy ◽  
Sers Substrate ◽  
Ag Nps ◽  
Sers Enhancement ◽  
Surface Enhanced ◽  
Enhancement Factors ◽  
Surface Enhanced Raman

Surface enhanced Raman spectroscopy (SERS) is a powerful analytical technique and has been most intensively studied. In this work, electroless deposition is proposed for Ag nanoparticles (NPs) decorated on chemical vapor deposition (CVD) growth graphene sheets (GS) to create hybrid SERS substrate. From three aspects of size distribution, morphology, and coverage, Ag NPs controllable decoration on GS and SERS enhancement factors of the hybrid SERS substrate is investigated. 200–300 times enhanced SERS intensities are detected from the Ag NPs on GS hybrid as compared to pure GS. Controllable decoration is crucial for improving SERS enhancement factorsβEF, becauseβEFfrom quasi cubic Ag NPs on GS is 6.53 times stronger than that from spheric one; 1.6 timesβEFis detected while the Ag NPs size distribution is reduced to half, and when the coverage is doubled,βEFis nearly doubled. This controllable Ag NPs/GS hybrid is capable of serving as a high performance SERS substrate for efficient chemical and biological sensing applications.

Sign in / Sign up

Export Citation Format

Share Document